0PU_IS_PS_41 not picking up Fiscal Year Period 001-016

Hi All,
While we are executing the Datasource :0PU_IS_PS_41(Budget Totals Records in Funds Management) in RSA3.However the Fiscal Year /Period is 000/2008..2009 in all of the cases is only picked up, the relevant FMAC Amount is 0 and it is not picking up any other Fiscal Periods like 1-16 at all .We have observed that this has relevant amount in the FMBDT Table for the Fiscal Periods .
Could you please suggest what we need to do so the the extractor shows up FiscalYear Periods 1-16 and the relevant amounts against it.
Regards,
Sasidhar G

Hi M,
Fiscal Year/Period 000 is used for Carry forward balances. However we dont any amount for period 000 and DS is correctly picking up amount 0 against the Fiscal Year Perod 000 .However it is not picking up any other Fiscal Year Periods like 1-16 in our Development system,
Regards,
Sasidhar Gunturu

Similar Messages

Web Report not printing the fiscal year period variable value

Hi,
In web report where in one text element, we enabled the fiscal year period variable value to display
in the report result.
If we run the report then this fiscal year period is displaying in the general information.
We have print button (Java Code), where user can take a printout of the same report.
In the printout this Fiscal year period is NOT PRINTING, other variables like rollup time, technical name of report etc are printing perfectly.
It is required to print the fiscal period also in the print out of the report.
Any help to come out of this.....
Thanks
Srinivas

Hi
Any Help.....
Srini

Data selection Fiscal year/period in info package

Hi Experts,
I loaded the data from application server to my data target and load completed with lot of records, but as per my requirment i need to load Fiscal year/period 001/2010 to 012/2010. I just giving selection in info package like 001/2010 to 012/2010 and i excute load it sowes no records, make sure in application server we have lot of records for this period.
CAn any one tell me how can i give format in infopackage.
Thanks in advance
David

Hi,
Select range in correct format. Instead of giving manually, You can select from system. This can be wrong format of selection.
Thanks,
SAC

Up to the period : Fiscal year period Exit variable is not working

Hi Experts,
I have the following code to get the upto the Fiscal year period variable .It shoudl fetch the Values From the starting of the Fiscal period like 2009001 whatever the period user enters.But currnelty it is not woking.Please let me know am I doing any mistake in code.currently it is only fetching for the month user enters not up to the period.
Prasad
Variable Name : ZUPTOPER
User Entry Var : 0P_FPER
WHEN 'ZUPTOPER'.
    IF i_step = 2.
      LOOP AT i_t_var_range INTO loc_var_range
      WHERE vnam = '0P_FPER'.
        fper = loc_var_range-low.
        fper+4(3) = '001'.
        CLEAR l_s_range.
        l_s_range-low      = fper.
        l_s_range-high     = loc_var_range-low.
        l_s_range-sign     = 'I'.
        l_s_range-opt      = 'BT'.
        APPEND l_s_range TO e_t_range.
        EXIT.
      ENDLOOP.
    ENDIF.

Hi Prasad,
This would be happening if you have put the user entry variable in the global filter of your query.
As a result the complete data set is restrcted to get the data only for one month.
Please use the variable for user entry month in a selection and not globally.
-Vikram

Fiscal Year / Periods does not show properly in WebI and compunding

Hi,
I have few reports where I am using Fiscal Year /Period as filter.
I have created a Universe on the top of a SAP BI Query and did not do any customization.
Then I created a WebI report. In this report I created various filters beside Fiscal Year / Period. When I run report, filter window opens. I can select all other filters but when it comes to Fiscal Year / Period it does not show me the values I want to see. It shows AUG 0001, APR 0025 etc. I want to see AUG 2010, MAR 2009 etc so that I can select them and get the data of the required Fiscal Year / Period. In Cube I have the required data. If I select MAR 0010 etc I donu2019t get any data.
On the other hand if I put fiscal Year / Period in columns or rows it shows the right value.
If also run SAP BI Query and Fiscal Year / Period in Variable then on variable screen I can see the right value from where I can select and get the required result.
Do I have to do any step at Universe level or something else?
It seems that Fiscal Year / Period is compounding.
Is there any help?
Thanks
Bashir Awan

Ingo,
for thanks for igniting my thoughts in this regards.
Yes these values do exist in SAP BW.
It is some how compunding the values at filter level.
It does not let me see the whole value when filter screen popup in BOBJ.
In SAP whole value shows when variable screen popup, I see three columns Fiscal Year / Period. Text, Posting Period Key, and Posting Year Key.
Fiscal year / Period Text which shows Aug 2009, Posting Period Key which shows our period 1 to 16, and Fiscal year key which shows 2009 etc.
Is there any setting in BOBJ which compunds the year for variable screen so that we may see the whole values for filters?
thanks

Error saying 'Posting period 000 is not defined for fiscal year variant K4'

Hi All,
   When I try to add a new entry in the transaction OB52, I get an error message saying 'Posting period 000 is not defined for fiscal year variant K4'. The entry that I add is,
Variant           : 0001
Account Type: +
From Period    : 1
Year               : 1995
To Period        : 12
Year               : 2010
From Period2 : 13
Year               : 2000
To period2      : 16
Year               : 2010
Please let me know what customising needs to be done to solve this issue.
Thanks a ton.
Best Regards,
Jeff

Hi,
Hava you checked in OB52 screen, by default 0001 posting period variant will be there for +, A, D, K, S account types.
If it is already existed in your OB52 screen, you won't create one more record with the same name. You have to edit the existing 0001 posting period with new values.
Thanks
Chandra

Error: "posting period is not defined for fiscal year variant" in FBICS3

Hi,
I got error "posting period is not defined for fiscal year variant" when I execute t code FBICS3.
I checked in OB29 & t code FBIC010 & noted that the fiscal year variant had ben maintained.
Please advice.

HI,
It was noted that the mentioned t code had been maintain but below mentioned error appear:
Posting period is not defined for fiscal year variant
Message no. GU506
Diagnosis
You have tried to determine a posting date in fiscal year variant for period , fiscal year , but this period is not defined for the variant.
Procedure
You maintain fiscal year variants in table T009.
It was referring to t code OB29. I have checked the detail, in OB29 also details maintain.
Please advice why the error still prompt.

'Fiscal year period not expected error in BI 7.0

Hi Guys,
When I am loading data into Target(DSO, CUBE) It gives a error 'Fiscal year period not expected'. I got same error when I am loading into any target. Source is ECC 6.0 and Target is BI 7.0. I am extracting the data from FI/CO module. Could you pls help on this.
Warm Regards,
G N

Is that error 'Fiscal year period not expected' or 'Fiscal year variant K4 not expected'
If it is 'Fiscal year variant K4 not expected', then try the following
In BI, select source System --> Transfer Global Settings (OR)
In transfer rules, select filed '0FISCVARNT' ---click on 'Tp' .... select radio button 'Constant' and enter K4..save & activate. (OR)
in ECC -- SE16--> check wether table T009 has value K4..If not enter new value (K4)

Netweaver 04s F4 on Fiscal Year / Period Variable does not retun any value

Netweaver 04s
F4 on Fiscal Year / Period Variable does not retun any list. When I tried to run the same query in RSRT, It gave a screen where it stopped at a break point.
62     *_____________________________________________________________________
63
64     *              error in >> l_repid       <<
65     *                       >> l_include     <<
66     *                       >> l_source_line <<
67     *__________________________^^^^^^^^^^^^^^_____________________________
68                 BREAK-POINT.                                   "#EC NOBREAK
69                 l_message = rs_c_true.
70               ELSE.
71                 CALL FUNCTION 'RRSV_SYSTYPE_GET'

Press F5 after that..lets see wat happens to it.
and tell wat value is there in your 0FISVARNT infoObject.
Regards,
San!

Custome variable exit for fiscal year/period

Hello BW Gurus,
Q1[1,2,3] Q2[4,5,6] Q3[7,8,9] Q4[10,11,12] quarterly periods
I have a custom variable exit as shown for fiscal year period
       IF LOC_VAR_RANGE-LOW+4(3) =< '003'.
          L_S_RANGE-LOW+4(3) = '001'.
       ELSEIF LOC_VAR_RANGE-LOW+4(3) > '003' AND
                                          LOC_VAR_RANGE-LOW+4(3) =<'006'.
          L_S_RANGE-LOW+4(3) = '004'.
       ELSEIF LOC_VAR_RANGE-LOW+4(3) > '006' AND
                                            LOC_VAR_RANGE-LOW+4(3) =< '009'.
          L_S_RANGE-LOW+4(3) = '007'.
       ELSE.
          L_S_RANGE-LOW+4(3) = '010'.
       ENDIF.
Now this works fine to give me the Current Quarter ....say if user puts 005/2007 i get the data Current quarter as [4+ 5] i.e. April and MAy data. Now for <b>Previous Period</b> I gave an offset as -3 to -1 inorder to get data for Q1[123] but the requirement is changed and I want the same time period i.e. [1+2] and not the entire quarter since the Current Quarter calculates only for 4 and 5.
I hope u are getting my point....please give your suggestions will reciprocate with lots of points

Hi gaurav,
Basically If I am selecting period 005 I am getting the data for 4 and 5 as Current Quarter i.e. April is the starting period of that Q2.
Similarly the previous Quarter should also give me data for period 1 and period 2.
Right now the offset I gave is -3 to -1 on my custom variable so i am getting data for the entire previous quarter which is Q1[1,2,3] but in reality i just want data for period 1and period 2.
Can you please help me in this
Appreciate your concern
Thanks

Custom exit variable for fiscal year/period

Hi BI Experts
1) In one of the column i just want Budget data to be displayed for the entire year..i.e even if the user enters 005/2006 for fiscal year /period that column should display 001/2006 to 012/2006 Budget.
I have created a restricted KF for 0AMOUNT restricted by version(for Budget), valuetype (for Budget )
now how do I assign variable for Fiscal year/period...and the problem is posting period is not populated ...I mean there is no transformation for that...
Can you share your experience on that ...full points wil be awarded...
Thanks

Hi Ajay and Pradhiba
I am really sorry for assigning you guuys points ...wasa bit busy ...
The problem is that the year and posting period is not populated...there fore I cannot use those time characteristics...
Now I have only fiscal year/period populated..now i want
if the user enters 005/2006 ....i want my first column to calculate the data for 001/2006 to 012/2006 ...thats the req...
can u share ur ABAP experience in that...
thanks

Custom variable for fiscal year/period

Hi BW Experts,
My problem is only fiscal year/period is populated
(fiscal year and posting period is not populated) and I need to have a custom exit ...that if the user enters 006/2007 i need to have a varaible which will contain 001/2006 to 012/2006 ..i.e data for entire year.
It doesnt matter which year the user enters ...i should fetch data for the entire year
I am very weak in ABAP programming ..if any body can share their experience..I would appreicate with full points
Thanks

Create a customer exit variable(not ready for input) var1 with interval
var2 is a ready for input variable that take the value entered by the user.
IF I_STEP = 2.
WHEN 'var2'.
      DATA: v_mth_beg TYPE d,
                 v_mth_end TYPE d
      REFRESH e_t_range.
      CLEAR l_s_range.
      LOOP AT i_t_var_range INTO loc_var_range
               WHERE vnam = 'var1'.
        EXIT.
      ENDLOOP.
      CONCATENATE loc_var_range-low+0(4) '001' INTO v_mth_beg.
      CONCATENATE loc_var_range-low+0(4) '012' INTO v_mth_end
      l_s_range-sign = 'I'.
      l_s_range-opt = 'BT'.
      l_s_range-low = v_mth_beg.
      l_s_range-high = v_mth_end.
      APPEND l_s_range TO e_t_range.
try this out.Hope it helps.
Regards,
Rakesh

Formula to calculate two fiscal year/period difference for non null quantit

We'd like to have a query result like the following:
Person -- Jan_2007 -- Feb_2007 -- Mar_2007 -- No. of Months
Tom --- 21 --- 54 --- 10 --- 2
John --- 0 --- 3 --- 15 --- 1
In the above query, the row is sales persons, the 1st three columns list the sales quantity by each sales person restricted by fiscal year/period and we would like to create 4th column "No. of Months" to calculate (will use formula) the month span (difference) for each sales person from his last sale activity (the last month he performed sales) and the 1st sale activity (the first month he performed sales) as listed in the above query result, e.g., Tom performed his first sales (sales quantity: 21) in the month of January of year 2007, and he performed his last sales (sales quantity of 10) in the month of March, 2007, then the "No. of Months" column value for Tom is 2. The calculation formula will be performed based on the last quantity value (> 0) to trace it's corresponding column fiscal year/period value (max of the fiscal year/period value with quantity value >0) and on the 1st quantity value (>0) to trace it's corresonding column fiscal year/period value (min of the fiscal year/period value with quantity value >0) and then do the subtraction between the max of the fiscal year/period value and the min one.
Would be appreciated if BEx experts here give the detailed steps on how to build up this formula to calculate the number of month difference and we will give you reward points!
Edited by: Kevin Smith on Mar 18, 2008 1:47 PM

hi Danny,
I only gave an example of 3 columns, but actually, yes, the report can have more than 12 months, e.g. from Jan_1999, Feb_1999, ..., Mar_2011, Apr_2011.
In our simple example of 3 columns for the three consecutive months, if John had (3)(0)(15), then the No. of Months is 2, or the last month value he performed sales and 1st month he performed sales.
You said macro in Excel sheet? Not sure if macro will work on web since we will eventually run the reports on web browser, therefore we still prefer using Formula.
Any idea/solution?
Thanks!

Variable for Fiscal Year Period in cube "0ECCS_C01" - Urgent

Hi all,
I have created a query based on cube "0ECCS_C01". I have restriced the characterstic " Fiscal Year Period" on "Period/Fiscal Year (Single Value Entry, Required)" variable. Output of the query are just 2 numbers : sum of "cumulative value GC" and sum of "period value gc" for given period. This query is working fine in query designer. The variable takes input in following form "001.2008". I have checked that in analyzer that the 'key' value of the variable is in this format "001.2008".
Now in VC , when i place "001.2008" in start point coding for fiscal year, it is giving error. Can any one please tell me that why it is throwing an error.I have given the same format as i gave in query designer. or shud i give period in some other format??
Please respond.
Regards,
Aisha Ishrat
ICI Pakistan Ltd.

Hi,
can you give us further information about the data type in the cube resp. the infoobject, which is used in the cube for the fiscal year/period?
Maybe you can try 0002008. Can you check which values you can enter when you execute the query in the web, so that the value helps for the variable comes up?
Best Regards
Marcel

Error while entering the Fiscal Year/Period Variable

I keep getting the following error message when I try to input or select the Variable on the report that has been executed on the Portal. Everything is fine when done through Bex.
<b> Please enter value in permitted format for variable Fiscal Year/Period (Selection Options, Optional).
Entry needs template ___/____
For characteristic , enter value in a permitted format</b>
Would anybody have any clue as to why?? It does have the Fiscal year Variant.
Thanks

This is fxed in BI JAVA SPS 12 Patch 2. Not sure whether there is any OSS notes for earlier SPS.

0PU_IS_PS_41 not picking up Fiscal Year Period 001-016

Similar Messages

Maybe you are looking for