1.5.1: Bug with single keystroke bind value being displayed but ignored

I just ran into a bug with using with bind values (run as statements) using SQL Developer 1.5.1.54.40, JDK 1.6.0_04, Win XP SP 2.
If the bind value was previously Null (NULL checkbox checked), then typing one (and only one!) character into the Value field displays the character and deselects the NULL checkbox but is ignored when running the statement - the bind variable is treated as Null. Running the statement again redisplays the bind dialog and the NULL checkbox is deselected but there is no value in the Value field.
For example: select rpad(dummy, :length, dummy) from dual;
When running this as a statement and typing a value between 0 and 9 into the Value field results in null (ie select rpad(dummy, null, dummy) from dual). Running again and leaving the Null checkbox unchecked and typing the single character again produces the correct result (ie 9 produces 9 Xs). Running again and checking the Null checkbox and typing the single character again produces null again.
This only occurs where you type a single key stroke in your bind value. If you type two characters and then delete one, the bind value is used correctly.
theFurryOne

Bug 7229257 - entering only one character in bind dialog value field is ignored
logged.
-Raghu

Similar Messages

How to use NODIM func with out it's values being rounded

I created a new calculated key figure in Query Designer 3.x, and used the function NODIM() - Value with out dimensions. When I use this function, the values are rounding off to the nearest value.
For example, I have a value 0.000075 US$, when I use NODIM function the value is displayed as 0.000080. Value is getting rounded to nearest value.
I tried using absolute value it did not work.
Can any one tell me how to use NODIM function with out it's value being rounded to nearest value.
Thanks,

Hi,
According to your description, you might want that "Notice" field has a default value when form is created and users can be able to change the value of that
field.
As a workaround, you can add an action rule in “Name” field via InfoPath to fill the default value in “Notice” field only when “Name” field is not blank and “Notice”
field is blank.
Settings of the rule are as below, you can modify it based on your need:
Here is a link about how to add an action rule in InfoPath form, you can use it as a reference:
https://support.office.microsoft.com/en-us/article/Add-rules-for-performing-other-actions-5322d726-b787-4e5f-8d37-ba6db68b451d?CorrelationId=8a64c12f-aa60-4d90-b1f9-a44fcc4e74b5&ui=en-US&rs=en-US&ad=US
Best regards
Patrick Liang
TechNet Community Support

Sql Developer 1.5.5 bug with large sequence start values.

We have a small table in our sql server 2005 schema (~700) rows. Its primary key is a bigint. We randomly generate ids for this table (don't ask). We have ids for this table which are larger than 2147483647. (java.lang.Integer.MAX_VALUE). I'm using a Windows 10g instance as the repository:
SQL> select * from v$version
2 ;
BANNER
Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Prod
PL/SQL Release 10.2.0.1.0 - Production
CORE 10.2.0.1.0 Production
TNS for 32-bit Windows: Version 10.2.0.1.0 - Production
NLSRTL Version 10.2.0.1.0 - Production
Capturing this model works fine.
Converting this model works fine.
When the converted model is "Generated", Sql Developer stops generating the script before the worksheet window is opened with the generated sql. If run from sqldeveloper/bin, this exception is output to the console:
java.lang.Exception: java.util.NoSuchElementException
at oracle.dbtools.migration.workbench.core.ui.AbstractMigrationProgressRunnable.start(AbstractMigrationProgressRunnable.java:141)
at oracle.dbtools.migration.workbench.core.GenerateInitiator.launch(GenerateInitiator.java:42)
at oracle.dbtools.raptor.controls.sqldialog.ObjectActionController.handleEvent(ObjectActionController.java:149)
at oracle.ide.controller.IdeAction.performAction(IdeAction.java:524)
at oracle.ide.controller.IdeAction.actionPerformedImpl(IdeAction.java:855)
at oracle.ide.controller.IdeAction.actionPerformed(IdeAction.java:496)
at javax.swing.AbstractButton.fireActionPerformed(AbstractButton.java:1995)
at javax.swing.AbstractButton$Handler.actionPerformed(AbstractButton.java:2318)
at javax.swing.DefaultButtonModel.fireActionPerformed(DefaultButtonModel.java:387)
at javax.swing.DefaultButtonModel.setPressed(DefaultButtonModel.java:242)
at javax.swing.AbstractButton.doClick(AbstractButton.java:357)
at javax.swing.plaf.basic.BasicMenuItemUI.doClick(BasicMenuItemUI.java:1225)
at javax.swing.plaf.basic.BasicMenuItemUI$Handler.mouseReleased(BasicMenuItemUI.java:1266)
at java.awt.Component.processMouseEvent(Component.java:6134)
at javax.swing.JComponent.processMouseEvent(JComponent.java:3265)
at java.awt.Component.processEvent(Component.java:5899)
at java.awt.Container.processEvent(Container.java:2023)
at java.awt.Component.dispatchEventImpl(Component.java:4501)
at java.awt.Container.dispatchEventImpl(Container.java:2081)
at java.awt.Component.dispatchEvent(Component.java:4331)
at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:4301)
at java.awt.LightweightDispatcher.processMouseEvent(Container.java:3965)
at java.awt.LightweightDispatcher.dispatchEvent(Container.java:3895)
at java.awt.Container.dispatchEventImpl(Container.java:2067)
at java.awt.Window.dispatchEventImpl(Window.java:2458)
at java.awt.Component.dispatchEvent(Component.java:4331)
at java.awt.EventQueue.dispatchEvent(EventQueue.java:599)
at java.awt.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:269)
at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:184)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:174)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:169)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:161)
at java.awt.EventDispatchThread.run(EventDispatchThread.java:122)
Caused by: java.util.NoSuchElementException
at oracle.dbtools.metadata.persistence.PersistableObjectIterator.next(PersistableObjectIterator.java:131)
at oracle.dbtools.migration.generate.GenerateWorker.generateSequences(GenerateWorker.java:862)
at oracle.dbtools.migration.generate.GenerateWorker.generateIndividualSchema(GenerateWorker.java:456)
at oracle.dbtools.migration.generate.GenerateWorker.generateSchema(GenerateWorker.java:365)
at oracle.dbtools.migration.generate.GenerateWorker.runGenerate(GenerateWorker.java:220)
at oracle.dbtools.migration.workbench.core.ui.GenerateRunner.doWork(GenerateRunner.java:71)
at oracle.dbtools.migration.workbench.core.ui.AbstractMigrationProgressRunnable.run(AbstractMigrationProgressRunnable.java:161)
at oracle.dbtools.migration.workbench.core.ui.MigrationProgressBar.run(MigrationProgressBar.java:569)
at java.lang.Thread.run(Thread.java:619)
A problem row can be viewed by issuing this query against the repository:
select * from md_sequences where seq_start > 2147483647;
We have one row returned. The oracle.dbtools.metadata.persistence.MdSequence class uses a java.lang.Integer value to store the start value for the sequence. The value stored in the repository's MD_SEQUENCE table overflows the Integer type.
Updating the SEQ_START column in the MD_SEQUENCE table fixed our problem. (Well, I can now generate the schema. I may have other problems with the sequence being off).
I've written this post to save someone else the day it took me to diagnose this problem with Sql Developer 1.5.5. At the very least Sql Developer should inform the user that it could not generate the script because of the large sequence start value. It basically swallows any error and terminates script generation without any type of feedback.

Update: I was able to recreate the problem!
1. Create a new table (I used TEST).
2. Mark first column af primary key.
3. Save the table.
Notice the name of the primary key index created: (TEST_PK in my case)
4. Edit the table.
5. Under constraints change the name of the primary key constraint.
6. Save the table.
Notice that the index still has its original name.
7. Edit the table.
8. Change something.
9. Attempt to save changes (Fails).
Conclusion:
Either SQL Developer should be aware of indexes with different name than a constraint,
or when SQL Developer changes the name of a constraint with an index, both the constraint and the index should be renamed.

CStr(date) with single-digit day value

Post Author: ron2112
CA Forum: Formula
CStr({@StartDate}, "M/d/yy") gives me "1/ 1/08" instead of "1/1/08". (Extra space after the first slash, in case that's not obvious.) Anyone have a clue why that might be? I'm running CR2008 on WinXP Pro with regional settings set to the default for the USA. Thanks!Ron Moses

Hi Chris,
If you want the user to allow to type different format masks, I think best way to achieve that is to have some piece of javascript that converts it in the character string that APEX accepts.
For ex. your date picker has a format mask of MM/DD/YYYY
You can create an onBlur javascript event that converts all dates into the above format.
Hope that helps,
Dimitri
-- http://dgielis.blogspot.com

I have a new hard drive and itunes and my computer (windows XP) no longer recognise my ipod. I also had the problem with the registry keys not being present but this has now been fixed. However i can no longer link my ipod up with itunes.

When I first tried itunes with my new hard drive there was the problem with the registry keys but something also flagged up about needing a signed driver. Is this anything to do with why Itunes and my computer no longer recognises when my ipod is linked up? Whatever i try under 'devices' my ipod is never available to sync up. If anyone can help I would be most grateful.

Thanks for your reply. Unfortunately this has not worked. I didn't have quicktime to begin with so I don't know if that makes a difference? After following the instructions, I get the "registry keys missing" problem appear again (which I've subsequently fixed again) and then when I connected the ipod I got the following message - 'Device driver software was not successfully installed'.
I've tried windows update but this doesn't do anything as '...the service is not running'.
Any suggestions?

Odd problem single contacts name not being display...

Hello Folks i have a strange problem possibly phone network or both
i have a N73 tied to o2 in the UK, i have friend who when they call me only shows up on screen as the number, this doesnt happen to any other contact on my phone, it just doesnt seem to recognise the name tied to the number
i deleted the contact and created it brand new, put the name and number in the correct place but still this is the only person on my phone whos number shows when they call rather than the name
very odd indeed!

This means you have the phone number in your contacts twice.
When this happens, since the handset can only display one contact name and it doesn't know which to display, it reverts to default.
In the past this was a real pain, however if you install the new Nokia Search you can now search your "desktop", ie: you can put in the phone number (or better, a part of it coz there may be formatting differences) and find the duplicate contacts.
You can download the new search tool from:
http://mobilesearch.nokia.com/A4160041

Font bug with SMC (Management console)

I have got a bug with the font in Solaris Management Console, and only with it.
With Xorg, the font are corrected displayed, but with Xsun, there are horible.
I think there a problem with XSun, or with SMC, but I didn't know Xsun.
Thanks.

Hello Senthilkumar,
Here are the outputs from the commands. The other ones that I left out (/var/adm/messages and showrev -p) had a lot of output and I wasn't sure what you needed. Please let me know what to post or if you want me to post the whole things.
# more /etc/release
Solaris 8 7/01 s28x_u5wos_08 INTEL
Copyright 2001 Sun Microsystems, Inc. All Rights Reserved.
Assembled 06 June 2001
# java -version
java version "1.2.2"
Solaris VM (build Solaris_JDK_1.2.2_07a, native threads, sunwjit)
Here are the errors that come back when /etc/init.d/init.wbem fails.
Exception in thread "main" java.lang.NoClassDefFoundError: com/sun/management/viperimpl/server/ViperServer
at java.lang.ClassLoader.defineClass0(Native Method)
at java.lang.ClassLoader.defineClass(ClassLoader.java:495)
at java.security.SecureClassLoader.defineClass(SecureClassLoader.java:110)
at java.net.URLClassLoader.defineClass(URLClassLoader.java:252)
at java.net.URLClassLoader.access$1(URLClassLoader.java:218)
at java.net.URLClassLoader$1.run(URLClassLoader.java:199)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(URLClassLoader.java:193)
at java.lang.ClassLoader.loadClass(ClassLoader.java:300)
at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:290)
at java.lang.ClassLoader.loadClass(ClassLoader.java:256)
at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:316)

Sql tuning advisor question on bind values

Hi guys,
I used the sql tuning wizard in Oracle 11g to get recommendation on how to improve performance on a long running query. Here is the recommendation I received:
At least one important bind value was missing for this sql statement. The
accuracy of the advisor's analysis may depend on all important bind values
being supplied.
Could someone please help me understand what it means? For example, what is a bind value, why was it missing, and why are they important?
Thanks!

I've seen this message maybe once before but I've never investigated it - I don't tend to run the SQL tuning advisor.
The best thing you could do is investigate the circumstances yourself, maybe trace the tuning advisor and see where it's getting its data from internally.
As mentioned, where it gets its data from depends on how you populate the tuning advisor - from cursor cache, awr, etc.
If it's from AWR as you mentioned, have a look at DBA_HIST_SQLSTAT.BIND_DATA for example? Or maybe DBA_HIST_SQLBIND? Etc.
You can check what the advisor probably pulls out of AWR using something like this:
select *
from table(dbms_Sqltune.select_workload_repository
 (begin_snap => 6441,
 end_snap => 6443,
 basic_filter => 'sql_id = ''gr5tqfnz07sxk'''));If the bind_list is empty then you know what it's complaining about.
I just tried it with an example sql it that I can see has bind data in DBA_HIST_SQLSTAT and DBA_HIST_SQLBIND and the BIND_LIST in the SQLSET returned by the SQL set above is null so that raises some questions ( I might be doing something wrong but as mentioned, it's not really something I tend to use).
The BIND_DATA raw is populated for me (although the bind_list collection isn't hence why original comment above).
If you know a representative set of binds, you can kick off your own tuning task manually and supply your own set of binds - see DBMS_SQLTUNE.CREATE_TUNING_TASK.
You can also extract and inspect the RAW BIND_DATA into a set of binds using DBMS_SQLTUNE.EXTRACT_BINDS.
e.g. to inspect:
select x.*
from v$sql s
, table(dbms_sqltune.extract_binds(s.bind_data)) x
where sql_id = '<sql_id>';Edited by: Dom Brooks on May 17, 2012 5:59 PM

Pay 20 bug to get more storage in the cloud but never got it

Hey Community,
I paid 20 bugs with my I tunes account via CC but i never got the extra storage... Any Ideas ??
THX

Is there are BUGs? (Grid with single column and dynamical alert's thresholds)


1. When i'm using a grid with a single column of data the high of ALL grid's cells is determinated by the smallest element. That's why if there is an empty cell in data column EVERY grid cell will be shown in Flash with the minimal high. Only workaround i could find was not to have any empty cell in my grids. Screenshots are attached. (By the way the workplace view of grid and results in flash file are extremely different by high). For my it looks like a BUG. :o)


<img src="/files/GridWorkPlace.jpg" width="96" height="473" />


2. It is possible to make a reference to cell range if you want to define alerts thresholds. But if you dynamicaly change the values in this range - this changes have no efect on relevant alert indication. Was it supposed not to implement any possibility to change alerts thresholds dynamicaly? Do you now any workaround to use different alerts treshold values with single element?


<img src="/files/GridFlash.jpg" width="88" height="442" />


It was possible to attach files to my post, but i can not see them now. :o(((

Multiple service contract with single binding

Hi
I am new to WCF and would like to use two or more service contract using same end point binding such as netTCPBinding.
I have done some research but no luck any advice

Hi,
For this scenario, Endpoints identify a WCF Service. An EndPoint is a combination
of Address, Contract and Binding. Mathematically an EndPoint can be defined as below:
A+B+C=E
If the same service is hosted      on multiple addresses with the same Binding and the same Contract
If the same service with a      different Contract on the same Address and for the same Binding
If the same service with a      different Bindings on the same Address and for the same Contract.
We can say that as a service designer you may consider to create multiple EndPoints in the following scenarios.
Service wants to expose more      than one type of binding.
Service wants to expose more      than one contract on the same binding.
Service wants to expose same      binding and contract on different addresses.
For more information, you could refer to:
http://www.c-sharpcorner.com/UploadFile/dhananjaycoder/dealing-multiple-endpoints-of-a-wcf-service499/
Regards

Dynamic SQL and Data with Single Quotes in it.

Hi There,
I have a problem in that I am using dynamic SQL and it happens that one of the columns does contain single quotes (') in it as part of the data. This causes the resultant dynamic SQL to get confused as the single quote that is part of the data is taken to mean end of sting, when in fact its part of the data. This leaves out a dangling single quote that was meant to enclose the string. Here is my dynamic SQL and the result of the parsed SQL that I have captured:
****Dynamic SQL*****
l_sql:='select NOTE_TEMPLATE_ID '||
'FROM TMP_NOTE_TEMPLATE_VALUES '||
'where TRIM(LEGACY_NOTE_CODE)='''||trim(fp_note_code)||''' '||
'and TRIM(DISPLAY_VALUE)='''||trim(fp_note_text)||''' ';
execute immediate l_sql INTO l_note_template_id;
Because the column DISPLAY_VALUE contains data with single quotes, the resultant SQL is:
******PARSED SQL************
select NOTE_TEMPLATE_ID
FROM TMP_NOTE_TEMPLATE_VALUES
where TRIM(LEGACY_NOTE_CODE)='INQ' and TRIM(DISPLAY_VALUE)='Cont'd'
And the problem lies with the single quote between teh characters t and d in the data field for DISPLAY_ITEM. How can I handle this?
Many thanks,

I have been reliably informed that if one doesn't enclose char/varchar2 data items in quotes, the right indices may not be usedI am into oracle for past 4 years and for the first time i am hearing this.
Your reliable source is just wrong. Bind variables are variables that store your value and which are used in SQL. They are the proper way to use values in your SQL. By default all variables in PL/SQL is bind variable.
When you can do some thing in just straight SQL just do it. Dynamic SQL does not make any sense to me here.
Thanks,
Karthick.

Multiple Comboboxes with single instance of Array Collection

First off - thanks to everyone for their contributions. This forum provides a lot of good information.
I'm stuck on a particular problem and I suspect I'm not thinking about the issue correctly.
I'm developing a dynamic module that instantiates components at runtime based on an XML scheme. Many of these components are drop-downs that are chained togther (a selection in one drives the population of the next)
I loop through the initial XML document to create and layout the components. I have been using a single Array Collection to populate the drop-down. This worked fine with the chained comboboxes since I only load one combox initially. However, when I add a couple of static combo boxes, the arraycollection seemed to be binding to the orginal combobox. For example, if I create 3 combo boxes they have drop-down values that display all 3 lists appended together. I was a bit surprised because I didn't think that I could bind an Array Collection. I certainly haven't defined a Binable ArrayCollection.
I thought I could solve the issue by simply creating a unique Array Collection at runtime - one for each element. However, I don't think this is possible or I can't figure out how to create a new Array Collection with a dynamic name - something like this:
I was hoping this would work -
var newDropDown_[numOfElement]:ArrayCollection = new ArrayCollection();
I've tried to use a Dictionary object to store each ArrayCollection. I couldn't get that to work properly.
Essentially - my code loops on the number of components to add:
for (var i:int = 0; i < numFormElements; i++)
 for (var j:int = 0; j < numvalues; j++)
 var valuefield:String = 'value_' + [j+1];
 var obj:Object=new Object();
 obj.label=instFields[i][valuefield].@label;
 obj.data=instFields[i][valuefield].@data;
 newDropDown.addItemAt(obj,j);
Then I add the components:
 var c:ComboBox = new ComboBox ();
 c.labelField='label';
 c.name=numberOfElement.toString();
 c.dataProvider= newDropDown;
 _h1.addChild(c);
 numComboDropDwns.push(c);
I need a way of looping, getting data and populating each component independently??
Any ideas?
Thanks,
John

I went a different route and solved the issue. For someone looking at a similar problem - this what I ended up doing:
I just loaded one array collection with data for all of the drop-downs on the form. I then populated each dataprovider with individual elements from the array.
for (var i:int = 0; i < numFormElements; i++)
for (var j:int = 0; j < numvalues; j++)
 var valuefield:String = 'value_' + [j+1];
 var obj:Object=new Object();
 obj.label=instFields[i][valuefield].@label;
 obj.data=instFields[i][valuefield].@data;
 newDropDown.addItemAt(obj,elementCounter);
 elementCounter = elementCounter + 1;
I keep track of the element #, number of values for each element and the overall index for the array.
Each data provider is then loaded with the subset from the array:
for (var z:int = (_counter - _numvalues) ; z < _counter; z++)
 var _label:String= newDropDown.getItemAt(z).label.toString();
 var _data:String = newDropDown.getItemAt(z).data.toString();
 c.dataProvider.addItem({label:[_label],data:[_data]});
This seems to work nicely - each component is created and loaded with only their data. I spent 3 days searching for a way to create a dynamic arraycollection at runtime. I don't think it's possible - but I'm not sure it was the best method anyway.

LOV Bug with rendering result?

Hey,
I'm attempting to create a basic LOV using either the "ADF LOV Input" or "ADF LOV Choice List" components.
When I try to use these components with a small set of data they behave as one would expect, however I run into some odd behavior when the list behind the LOV is large and the component is required to fetch additional rows of data as the user scrolls through the options.
With the LOV Input, as I scroll through the data it is retrieved fine, however when I select a value from the bottom half of the list, the component on the page does not update with the selected value and the console in JDeveloper throws the following [truncated] stack trace:
SEVERE: Server Exception during PPR, #1
java.lang.NullPointerException
     at oracle.adfinternal.view.faces.model.binding.RowDataManager.getRowIndex(RowDataManager.java:171)
     at oracle.adfinternal.view.faces.model.binding.FacesCtrlHierBinding$FacesModel.getRowIndex(FacesCtrlHierBinding.java:417)
     at org.apache.myfaces.trinidad.component.UIXIterator._fixupFirst(UIXIterator.java:310)
     at org.apache.myfaces.trinidad.component.UIXIterator.__encodeBegin(UIXIterator.java:297)
     at org.apache.myfaces.trinidad.component.UIXCollection.encodeBegin(UIXCollection.java:517)
     at org.apache.myfaces.trinidad.render.CoreRenderer.encodeChild(CoreRenderer.java:271)
     at oracle.adfinternal.view.faces.renderkit.rich.SimpleInputListOfValuesRendererBase$ListOfValuesDialogRenderer.encodeContent(SimpleInputListOfValuesRendererBase.java:598)
     at oracle.adfinternal.view.faces.renderkit.rich.PanelWindowRenderer.encodeAll(PanelWindowRenderer.java:190)
     at oracle.adfinternal.view.faces.renderkit.rich.DialogRenderer.encodeAll(DialogRenderer.java:135)
     at oracle.adf.view.rich.render.RichRenderer.delegateRenderer(RichRenderer.java:846)
     at oracle.adfinternal.view.faces.renderkit.rich.SimpleInputListOfValuesRendererBase$ListOfValuesPopupRenderer.encodeAllChildren(SimpleInputListOfValuesRendererBase.java:634)
     at oracle.adfinternal.view.faces.renderkit.rich.PopupRenderer.encodeAll(PopupRenderer.java:225)
     at oracle.adf.view.rich.render.RichRenderer.encodeAll(RichRenderer.java:815)
     at org.apache.myfaces.trinidad.render.CoreRenderer.encodeEnd(CoreRenderer.java:208)
     at org.apache.myfaces.trinidad.component.UIXComponentBase.encodeEnd(UIXComponentBase.java:733)
It looks as though the View Object on the back-end is getting populated with the correct value selected from the list (I have a second, cascaded LOV built off the value selected which is populating with the correct data) however the front-end is not getting populated with the correct data.
With the second LOV component (ADF LOV Choice List) I am completely unable to scroll through the list of values; the component hangs as soon as it attempts to fetch any more data and throws the following [truncated] stack trace in the JDeveloper console:
SEVERE: Server Exception during PPR, #2
java.lang.NullPointerException
     at oracle.jbo.uicli.binding.JUCtrlListBinding$JUCtrlListBindingItemRef.get(JUCtrlListBinding.java:3006)
     at javax.el.MapELResolver.getValue(MapELResolver.java:164)
     at javax.el.CompositeELResolver.getValue(CompositeELResolver.java:143)
     at com.sun.faces.el.FacesCompositeELResolver.getValue(FacesCompositeELResolver.java:64)
     at com.sun.el.parser.AstValue.getValue(AstValue.java:117)
     at com.sun.el.ValueExpressionImpl.getValue(ValueExpressionImpl.java:192)
     at org.apache.myfaces.trinidad.bean.FacesBeanImpl.getProperty(FacesBeanImpl.java:70)
     at oracle.adfinternal.view.faces.renderkit.rich.ValueRenderer.getValue(ValueRenderer.java:170)
     at oracle.adfinternal.view.faces.renderkit.rich.ValueRenderer.getConvertedString(ValueRenderer.java:129)
     at oracle.adfinternal.view.faces.renderkit.rich.OutputTextRenderer.encodeAll(OutputTextRenderer.java:105)
     at oracle.adf.view.rich.render.RichRenderer.encodeAll(RichRenderer.java:815)
     at org.apache.myfaces.trinidad.render.CoreRenderer.encodeEnd(CoreRenderer.java:208)
If this is indeed a bug with the ADF components themselves attempting to lazy-load the values in the list, is there a way to force the component to simply load the entire list up-front instead of as the user scrolls? This would be an acceptable workaround for my application.
For the record, the View this page is based off runs flawlessly in the BC tester. Also, incase this helps any, the LOV is not based on any sort of Fk link / association. It is built upon accessor attributes (and bind variables and view criteria in the case of the mentioned cascading LOV).
Thanks in advance for the help,
Chris

Chris,
can you provide instructions how to reproduce this based on the HR schema (e.g. Departments/Employees table). If its easier for you to create a testcase, please send it to frank. /nimphius /@ oracle.com (please remove blanks and slashes) in a zip file, where you rename the "zip "extension to "unzip"
Frank

Possible iPhone bug with custom recurring day schedule? Need help.

In Microsoft Outlook I have a 64 day schedule that is set up as single all day recurring events each day. Each day of the 64 day schedule recurrs every 64 days. Day 1 recurrs every 64 days, day 2 recurrs every 64 days, etc., etc.
When I synced this to an iPhone, each day had an incorrect custom recurring day set at every 18 days. This, of course threw off the whole schedule. After doing some testing, I found out that a custom recurr of 45 days worked, a custom recurr of 46 days told the iPhone it recurred every 1 day. 47 day recurr did the same thing. 48 day recurr told the iPhone it recurred every 2 days, 49 day recurr became 3 days, 50 became 4 days, 51 became 5 days...64 became 18 days.
Is this indeed a bug with iPhone or is there something I can do for a single 1 day event recurr every 64 days? And, why is there no custom setting when setting up an event on the iPhone?

ICKIER wrote:
Is this too complicated for a reply?!
Apparently, no one has a solution for you. It may be a bona fide bug. You can let Apple know about that:
http://www.apple.com/feedback/iphone.html.

1.5.1: Bug with single keystroke bind value being displayed but ignored

Similar Messages

Maybe you are looking for