1.6.0_24 on XP worked now 1.6.0_29 on 7 doesn't work

I have a question for the community. I don't know everything there is to know about java, so please forgive me. Here it is: We are upgrading from 32bit winxp sp3 to 64bit Win7. We have to access certain Cisco managers, and we used to authenticate to them just fine using winxp and java version 1.6.0_24-b07. Now that we have "upgraded" to win7, we're using java version 1.6.0_29-b11 and we can't authenticate. I am not certain whether this is a win7 issue or a java issue. When we try to authenticate, we get a messsage that says "message from webpage, access denied insufficient privileges". The manager is remote and we are authenticating to the http server. Any help would be greatly appreciated. Thank you very much!

We have just upgraded the JRE to 1.6.0_29 which has added additional security and caused our part of our application fail.
Try going to 1.6.0.27
See release note for .29
RMI Registry Issue
A bug in the rmiregistry command included in this release may cause unintended exceptions to be thrown when an RMI server attempts to bind an exported object which includes codebase annotations using the "file:" URL scheme. The RMI servers most likely to be effected are those which are invoked only by RMI clients executing on the same host as the server.
RMI annotates codebase information as part of the serialized state of a remote object reference to assist RMI clients in loading the required classes and interfaces associated with the object at runtime. Exported objects which are looked up in the RMI registry and invoked by RMI clients running on hosts other than the server are usually annotated with codebase URL schemes, such as "http:" or "ftp:" and these should continue to work correctly.
As a workaround, RMI servers can set the java.rmi.server.codebase property to use codebase URLs other than the "file:" scheme for the objects they export.

Similar Messages

Flashing question mark on start up -Pram reset worked now it's back and pram doesn't work

So the other half has crashed my mid 2012 macbook pro twice in two days (watching youtube). First time I managed to get passed the flashing question mark folder icon using pram reset now this doesn't work and it just goes to that icon. Hard drive is missing in. utility so can't whipe that either
any suggestions on what has failed, it's only 1.5 years old so I'm really disappointed

A flashing question mark or globe appears when you start your Mac
Question (?) Mark, Blinking Folder, or Gray Screen at Startup
These are related but not identical issues. Their causes are outlined in Intel-based Mac- Startup sequence and error codes, symbols. Solutions may be found in:
A flashing question mark appears when you start your Mac
Mac OS X- Gray screen appears during startup
In most cases the problems may be caused by one or more of these:
a. Problem with the computer's PRAM - See Resetting your Mac's PRAM and NVRAM.
b. Boot drive's directory has been corrupted - Repair with Disk Utility.
c. Critical system files are damaged or deleted - Reinstall OS X.
d. The disk drive is physically non-functional - Replace the hard drive.
Note that the information I have provided is what Apple recommends, If other users suggest different solutions than found here, then be sure what they recommend does not impact on your warranty, if any, or ability to get continuing Apple service.
Please don't start removing drives or changing cables unless you know what you are doing and have exhausted other non-invasive alternatives outlined here. If you perform any work yourself that is unapproved by Apple, then you will void any warranty you may have and lose all further Apple Support.
Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
The main difference if you are using Lion or Mountain Lion is that you must first boot from the Recovery HD. Simply boot from the Recovery HD to perform the above.
Reinstall Snow Leopard Without Erasing The drive
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install Mac OS X 10.6.8 Update Combo v1.1.
Reinstalling Lion/Mountain Lion Without Erasing The Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

I upgraded to mountain lion, now my mini dvi to hdmi doesn't work

I installed mountain lion and now my mini dvi to hdmi doesn't work. I did a disk permission repair, but that didn't help. Any suggestions?

My internet card will only work on 32bit,and it sounds like mountain lion only works on 64bit so that must be my problem. I think I will have to upgrade my internet or go back to lion.

I upgraded my 3 yr old iMac to Snow Leopard and now my HP C4150 Scanning function doesn't work (not recognized). I downloaded updated Drivers from the HP site, but still no joy. Any suggestions?

I upgraded my 3 yr old iMac to Snow Leopard (OS X 10.6) and now my HP C4150 Scanning function doesn't work (not recognized). I downloaded updated Drivers from the HP site and installed them, but still no joy. Any suggestions?

aspaceman,
Perhaps I owe you an apology. Having re-read that downloading from HP was unsuccessful I feel uncomfortable. Can I suggest you update your 10.6 system (as noted in your profile) to 10.6.8 (if it is not already there) by using the
Mac OS X 10.6.8 Update Combo v1.1 combo update plus any software updates that then apply.

Yosemite will not upload on my MacPro, says I have to verify or repair, but when I do - it fails on that too. Am now stuck with a computer that doesn't work ! Have I lost everything ?

Yosemite will not upload on my MacPro, says I have to verify or repair, but when I do - it fails on that too. Am now stuck with a computer that doesn't work ! Have I lost everything ?

Hello BassoonPlayer,
Since you are using one of the the school's Macbooks, it is quite possible that the time and date are not properly set on the computer that you are using. FaceTime will not work if you do not have the proper time zone set up for the location that you are in. This past week, there were a two other Macbook users I've helped by simply telling them to set the Date/Time properly. By the way, you described your problem very well, which makes it easier for us to help you. Hope this solves your problem -- if not, post back and I can suggest other remedies.
Wuz

Firefox installed the latest version. Now my google browser, history etc. doesn't work anymore. It doesn't respond. I can't run searches from the browser. youtube button is missing. I've tried opening firefox in safe mode but that doesn't work.

# Question
firefox installed automatically the latest version. Now my google browser, history etc. doesn't work anymore. It doesn't respond. I can't run searches from the browser. youtube button is missing. I've tried opening firefox in safe mode but that doesn't work

A possible cause is a problem with the file places.sqlite that stores the bookmarks and the history.
*http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
What happens if you open Firefox in Save mode?
*https://support.mozilla.com/kb/Safe+Mode
*Help > Restart with Add-ons Disabled

I have set a passcode for my iphone and later I forgot it, and I tried it so many times but it was not correct now the iphone is disable it doesn't work in tune, can anyone solve this problem??

I have set a passcode for my iphone and later I forgot it, and I tried it so many times but it was not correct now the iphone is disable it doesn't work in tune, can anyone solve this problem??

You can solve this problem. Just follow these instructions:
http://support.apple.com/kb/ht1212

My iPhone is acting up again; freezing up during phone calls and now the head phone jack intermittently doesn't work.

I got my iPhone 5 back in February 2013 and for the most part of the year I enjoyed it. Then I started having issues with it. First of all the WiFi randomly quit working. I didn't even update it. So I tried updating it, resetting, and restoring it. While it was under warranty I tried getting the issue fixed, but Apple CS blew me off saying it was accidental damage and I should have gotten Apple Care. This time Verizon covered their *** and replaced the phone for me even though it was out of their 6 month warranty period. I think I posted this experience before.
Now my iPhone is acting up again. It first started freezing up during phone calls and now the head phone jack intermittently doesn't work. Again, resetting, restoring, and updating it did not fix these issues.
<Re-Titled By Host>

The original issue they didn't state exactly why it was Accidental Damage. After running through some troubleshooting, they just stated it was Accidental Damage and that I should file a claim with my insurance, and that Apple Care would have covered it; then closed the request.
I've tried resetting settings, restoring it as new, and that was a no go. When it freezes up during calls I also have to perform a hard reset by pressing and holding both the power and the home buttons to get it functioning at all again(just completely freezes, won't respond to touch or home button.) I noticed that the proximity sensor isn't responding as well, so I have to tilt it away from my ear while in a call to keep from pressing the buttons on the touchscreen with the side of my face. I avoid phonecalls now, and text exclusively.
I don't live anywhere near a Genius Bar so I'm stuck with the online support to Apple. And since I don't have a landline, I get charged for their phone support so I tend not to use it.
Getting two lemons in a row seems coincidental so I'm wondering if it's a bad batch Verizon got then distributed out.

Sound doesn't work(only in firefox). why? sound doesn't work(only in firefox). why? (adobe flash player doesn't work even thought it's installed)

sound doesn't work (only in firefox). adobe flash player doesn't work correctly, thought it's installed. can't solve the problem. i need Sound.
== This happened ==
Every time Firefox opened
== don't know

What does the Adobe test page say?
http://www.adobe.com/software/flash/about/
Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]
If it does work in Safe-mode then disable all your extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
You can use "Disable all add-ons" on the ''Safe mode'' start window.
You have to close and restart Firefox after each change via "File > Exit" (on Mac: "Firefox > Quit")
See also [[No sound in Firefox]] and [[Video or audio does not play]]

My callout toolbar stopped working abruptly. Restarted computer. Still doesn't work - how do I get the tool back?

My callout toolbar stopped working abruptly. Restarted computer. Still doesn't work - how do I get the tool back?

The tool is called a “callout” note. It places a text box with a leader. It’s been working just fine until suddenly it stopped working and I get an error message saying “desired operation cannot be performed on this object”. It doesn’t matter where I try to place the callout. It simply stopped working. I have tried restarting Acrobat. I have restarted my computer. I have used multiple files to ensure the issue isn’t with a corrupted file. Nothing works. The tool simply stopped working.

My app store doesn't work at all....safari doesn't work properly....it shows something like super fish....if i try to login to app store it shows connection failed. i wanted to re install osx or install yosemite beta

my app store doesn't work at all....safari doesn't work properly....it shows something like super fish....if i try to login to app store it shows connection failed. i wanted to re install osx or install yosemite beta

HI ..
The only way to reinstall OS X on a Mac already running v10.9 is to use OS X Recovery.
Starrtup your Mac while holding down the Command + R keys.
From there you should be able to access the built in utilities to repair the startup disk and reinstall OS X.
Please read > OS X Recovery

Skill Search works fine from search center, but it doesn't work from Lync client

My environment consists of Lync Server 2013 and SharePoint Server 2013.
I configured skill search and it works fine from search center, but it doesn't work from Lync client. An error appears says"error occurred during the search, please try again".
I configured these URLs in my client policy
set-csclientpolicy -identity global -spsearchinternalurl http://<Sharepoint Server>/_vti_bin/search.asmx
set-csclientpolicy -identity global -spsearchcenterinternalurl http://<Sharepoint Server>/searchcenter/pages/peopleresults.aspx
I checked these URLs from the browser and they work fine.
I disabled anonymous access to _vti_bin, but no change then i checked lync log but i didn't find any error then i used Wireshark and found that when Lync client contacts Sharepoint, Sharepoint responded to it with internal server error http 500
Please advice for what to do

Hi,
Thanks For your sharing.
Best Regards,
Lisa Chen
Lisa Chen
TechNet Community Support

I downloaded a ringtone to my phone and it works when I play it but it doesn't work when I assigned it to a contact. Help. I'm using ios 7.

I downloaded a ringtone to my phone and it works when I play it but it doesn't work when I assigned it to a contact. Help. I'm using ios 7.

The following guide gives information on how to sync ringtones from your computer to the phone. The reference section at the bottom of the quide also gives instructions on how to convert a song to a ringtone. https://discussions.apple.com/docs/DOC-3792

My Iphone 5 suddenly turned off and there is only the Itunes logo with the usb image and arrow key. I've now connected to Itunes but it doesn't work

My Iphone 5 suddenly turned off and there is only the Itunes logo with the usb image and arrow key. I've now connected to Itunes but it doesn't work

Have a look through this Doc
http://support.apple.com/kb/TS3281

View works in Solaris in 1 minute but doesn't work in WIn2003

We have a view is badly written. Other than the non-searchable conditions like '%*%'. What else is wrong:
CREATE OR REPLACE FUNCTION anycon_p(neid NUMBER, joinaid VARCHAR2, sdf NUMBER, nodetype NUMBER ) RETURN N
UMBER IS
fromid NUMBER :=0;
BEGIN
if (nodeType=302 or nodetype = 303 )then
select count(1) into fromid from JS_CM_TP tp where (tp.ne_id=neid)
and (tp.tp_joinaid = joinaid) and (tp.tp_sdf = sdf) and (tp.crs_emlkey is not null);
elsif (nodeType=307)then
select count(1) into fromid from JS_CM_TP tp where (tp.ne_id=neid)
and (tp.tp_joinaid = joinaid)and (tp.tp_sdf <= sdf)
and (tp.tp_sdf+2 >= sdf)and(tp.crs_emlkey is not null);
elsif (nodeType=308)then
select count(1) into fromid from JS_CM_TP tp where (tp.ne_id=neid)
and (tp.tp_joinaid = joinaid) and (tp.tp_sdf <= sdf)
and (tp.tp_sdf+11 >= sdf)and(tp.crs_emlkey is not null);
end if;
RETURN fromid;
EXCEPTION
WHEN NO_DATA_FOUND THEN
RETURN 0;
END;
CREATE OR REPLACE VIEW JS_QUERY_FAC_AVAIL_VW AS
SELECT
tp.NE_ID NE_ID,
ne.NE_NAME NE_NAME,
tp.SHELFAID shelfaid,
c.CARD_TYPE cardtype,
tp.TP_AID tpaid,
tp.TP_TPTYPE tptype,
tp.TP_RAWPST tppst,
tp.TP_JOINAID pmaid,
c.CARD_RAWPST cardpst,
tp.TP_TACCID tacc,
CASE
WHEN c.CARD_RAWPST LIKE '%OOS%' THEN 'PM-OOS'
WHEN tp.TP_RAWPST LIKE '%OOS%' THEN 'FAC-OOS'
WHEN (tp.TP_LPBKCMD IS NOT NULL) AND (tp.TP_LPBKCMD NOT LIKE '%NONE%') THEN 'FAC-LPBK'
ELSE 'IS-NOT CONNECTED'
END AS reason,
tp.TP_FACTYPE AS factype
FROM
JS_NM_NE ne,
JS_CM_CARD c,
JS_CM_TP tp
WHERE
ne.NE_ID = c.NE_ID
AND c.NE_ID = tp.NE_ID
AND tp.TP_JOINAID = c.CARD_AID
AND c.CARD_RAWPST NOT LIKE '%UEQ%'
AND (tp.TP_DV_NODETYPE='300')
AND (tp.TP_TPTYPE ='DGR')
AND (tp.TP_RAWPST LIKE '%OOS%'
OR c.CARD_RAWPST LIKE '%OOS%'
OR (tp.TP_LPBKCMD IS NOT NULL AND tp.TP_LPBKCMD NOT LIKE '%NONE%')
OR tp.CRS_EMLKEY is null)
AND (tp.TP_TACCID IS NULL OR tp.TP_TACCID LIKE '%0%')
UNION ALL
SELECT
tp.NE_ID NE_ID,
ne.NE_NAME NE_NAME,
tp.SHELFAID shelfaid,
c.CARD_TYPE cardtype,
tp.TP_AID tpaid,
tp.TP_TPTYPE tptype,
tp.TP_RAWPST tppst,
tp.TP_JOINAID pmaid,
c.CARD_RAWPST cardpst,
tp.TP_TACCID tacc,
CASE
WHEN c.CARD_RAWPST LIKE '%OOS%' THEN 'PM-OOS'
WHEN tp.TP_RAWPST LIKE '%OOS%' THEN 'FAC-OOS'
WHEN (tp.TP_LPBKCMD IS NOT NULL) AND (tp.TP_LPBKCMD NOT LIKE '%NONE%') THEN 'FAC-LPBK'
ELSE 'IS-NOT CONNECTED'
END AS reason,
tp.TP_FACTYPE AS factype
FROM
JS_NM_NE ne,
JS_CM_CARD c,
JS_CM_TP tp
WHERE
ne.NE_ID = c.NE_ID
AND c.NE_ID = tp.NE_ID
AND tp.TP_JOINAID = c.CARD_AID
AND c.CARD_RAWPST NOT LIKE '%UEQ%'
AND ((tp.TP_DV_NODETYPE='302' AND tp.tp_tptype='DGR'
AND((tp.tp_rawpst NOT LIKE '%UAS%') OR(tp.tp_joinaid NOT LIKE 'EPMX24%')))
OR(tp.TP_DV_NODETYPE='303' AND((tp.tp_rawpst NOT LIKE '%UAS%') OR
(NOT EXISTS ( select null from JS_CM_TP tp1
where (tp1.ne_id = tp.NE_ID)
where (tp1.ne_id = tp.NE_ID)
and (tp1.tp_sdf = tp.tp_sdf)
and (tp1.tp_dv_nodetype = '302')
and (tp1.tp_rawpst not like '%UAS') )))))
AND (tp.TP_RAWPST LIKE '%OOS%'
OR c.CARD_RAWPST LIKE '%OOS%'
OR (tp.TP_LPBKCMD IS NOT NULL AND tp.TP_LPBKCMD NOT LIKE '%NONE%')
OR (NOT EXISTS ( select null from JS_CM_TP tp1
where (tp1.ne_id = tp.NE_ID)
and (tp1.tp_joinaid = tp.tp_joinaid)
and (tp1.tp_sdf = tp.tp_sdf)
and (tp1.crs_emlkey is not null) ) ) )
AND (tp.TP_TACCID IS NULL OR tp.TP_TACCID LIKE '%0%')
UNION ALL
SELECT
tp.NE_ID NE_ID,
ne.NE_NAME NE_NAME,
tp.SHELFAID shelfaid,
c.CARD_TYPE cardtype,
tp.TP_AID tpaid,
tp.TP_TPTYPE tptype,
tp.TP_RAWPST tppst,
tp.TP_JOINAID pmaid,
c.CARD_RAWPST cardpst,
tp.TP_TACCID tacc,
CASE
WHEN c.CARD_RAWPST LIKE '%OOS%' THEN 'PM-OOS'
WHEN tp.TP_RAWPST LIKE '%OOS%' THEN 'FAC-OOS'
WHEN (tp.TP_LPBKCMD IS NOT NULL) AND (tp.TP_LPBKCMD NOT LIKE '%NONE%') THEN 'FAC-LPBK'
ELSE 'IS-NOT CONNECTED'
END AS reason,
tp.TP_FACTYPE AS factype
FROM
JS_NM_NE ne,
JS_CM_CARD c,
JS_CM_TP tp
WHERE
ne.NE_ID = c.NE_ID
AND c.NE_ID = tp.NE_ID
AND tp.TP_JOINAID = c.CARD_AID
AND c.CARD_RAWPST NOT LIKE '%UEQ%'
AND tp.TP_DV_NODETYPE IN ('307')
AND (tp.tp_aid not like '%-P-%')
AND (tp.TP_TACCID IS NULL OR tp.TP_TACCID LIKE '%0%')
AND (tp.TP_RAWPST LIKE '%OOS%'
OR c.CARD_RAWPST LIKE '%OOS%'
OR (tp.TP_LPBKCMD IS NOT NULL AND tp.TP_LPBKCMD NOT LIKE '%NONE%')
OR (NOT EXISTS (select null from JS_CM_TP tp1
where (tp1.ne_id = tp.NE_ID)
and (tp1.tp_joinaid = tp.tp_joinaid)
and (tp1.tp_sdf <= tp.tp_sdf)
and (tp1.tp_sdf >= tp.tp_sdf-2)
and (tp1.crs_emlkey is not null) ) ) )
UNION ALL
SELECT
tp.NE_ID NE_ID,
ne.NE_NAME NE_NAME,
tp.SHELFAID shelfaid, c.CARD_TYPE cardtype,
tp.TP_AID tpaid,
tp.TP_TPTYPE tptype,
tp.TP_RAWPST tppst,
tp.TP_JOINAID pmaid,
c.CARD_RAWPST cardpst,
tp.TP_TACCID tacc,
CASE
WHEN c.CARD_RAWPST LIKE '%OOS%' THEN 'PM-OOS'
WHEN tp.TP_RAWPST LIKE '%OOS%' THEN 'FAC-OOS'
WHEN (tp.TP_LPBKCMD IS NOT NULL) AND (tp.TP_LPBKCMD NOT LIKE '%NONE%') THEN 'FAC-LPBK'
ELSE 'IS-NOT CONNECTED'
END AS reason,
tp.TP_FACTYPE AS factype
FROM
JS_NM_NE ne,
JS_CM_CARD c,
JS_CM_TP tp
WHERE
ne.NE_ID = c.NE_ID
AND c.NE_ID = tp.NE_ID
AND tp.TP_JOINAID = c.CARD_AID
AND c.CARD_RAWPST NOT LIKE '%UEQ%'
AND tp.TP_DV_NODETYPE = '308'
AND (tp.tp_aid not like '%-P-%')
AND (tp.TP_TACCID IS NULL OR tp.TP_TACCID LIKE '%0%')
AND (tp.TP_RAWPST LIKE '%OOS%'
OR c.CARD_RAWPST LIKE '%OOS%'
OR (tp.TP_LPBKCMD IS NOT NULL AND tp.TP_LPBKCMD NOT LIKE '%NONE%')
OR (NOT EXISTS (select null from JS_CM_TP tp1
where (tp1.ne_id = tp.ne_id)
and (tp1.tp_joinaid = tp.tp_joinaid)
and (tp1.tp_sdf <= tp.tp_sdf)
and (tp1.tp_sdf >= tp.tp_sdf-11)
and (tp1.crs_emlkey is not null) ) ) )
WITH READ ONLY;

If you think anybody's going to be able to point out flaws in that code you're mistaken. Well, maybe somebody with time on their hands will go through it but I doubt it.
But given your subject the real point of enquiry ought to be, what is the difference between your Solaris set up and your Windows environment? And what do you mean by
doesn't work in WIn2003please describe observed behaviour, including error messages if appropriate.
Cheers, APC

1.6.0_24 on XP worked now 1.6.0_29 on 7 doesn't work

Similar Messages

Maybe you are looking for