1 hour time change

Hi
It has happenend again!
Here in the UK we put the clocks forward an hour this morning.
THe time on my iPhone changed OK. But all my appointments also moved forward an hour.
So my 10 am appointment on Monday has now been reset to 11am.
All appontments are 1 hour out.
Appointments in MS Outlook don't change.
I have not tried sysnching with Outlook in case I get double appointments.
How can I get all appointments' time on my iPhone back to where they should be?
Why can't a fix be implemented so this doesn't happen again? (It happenend last year when we put the clocks back).
Thanks
BD

Mine did exactly the same again.
The last time it happened I discovered the following.
1) If you change outlook's time it put another entry in the iPhone's calendar.
2) If you change the iPhones calendar appointment time it creates another entry in outlook!
3) If you plug your iPhone in an sync without making any changes to either outlook or iPhone's calendar no duplicates/new entries are made.
To get things back in order, plus in your iPhone and under INFO tab in iTunes uncheck sync calendar. I will say do you want to remove all entries on the iPhone or keep them. Select delete. This will wipe all your entries on the iPhone only. Retick and click sync. It will then put all your outlook entries back in and they will be at the right time again.
I would export your OUtlook Calendar to a .pst file first just to be safe.

Similar Messages

Will my phone automatically go one hour ahead tonight for the time change? Also, if I set my alarm will it go off at the time it's supposed to, or an hour later?

I live in ny and was wondering if tonight with the time change, will my iPhone automatically change the time? Also, if my alarm is set to go off in the morning, will it go off an hour later, or at the time that its supposed to?

On your iPhone, go to Settings > General > Date & Time.
If you have Set Automatically selected, the date and time for your iPhone is set automtically based on the tower your iPhone is connected to with your cell phone carrier.
The date and time will be changed automatically on your iPhone based on your carrier changing the date and time at the tower your iPhone is connected with.
If the date and time is changed automatically on your iPhone, the alarm wiil go off at the selected time for the alarm. If you need to ensure you don't miss waking up at the designated time, I would use a backup alarm that is not based on the date and time being changed by your cell phone carrier.

MSS: Approval of Working Hours - Working Times Changed Subsequently/Locked

Dear All,
I am facing one issue while approving the CATS working hours in portal through MSS.
We are using task TS31000007 for approval.
In our CATS profile we have input fields as:
CO Area, Send. CCtr, Activity Type, Rec. Order, Oper./Act., Work center, Plant , Att./abs. type, Wage Type, Acctg Indicator
When user enters the working hous only against Att. / abs. type, the manager gets the task and approval/rehjection happens successfully.
But when user mentions the other fields as well in addition to Att. / abs. type, and saves the hours, the manager can see the task. But when manager tries to approve/reject the working hours he gets message like below:
At this time, you cannot save the following working times since the employees working times are currently being processed or have just been changed.
Save any other data first and wait a few moments.
You can then choose Back and attempt to save the data again. Your approval decisions are retained but you might see data that is out-of-date.
Alternatively, you can restart the application to see the changes that have been made to this data.
Working Times Changed Subsequently or Locked
Employee Date Number Message
21 29.09.2008 4.00H Not possible to save: Record has changed
But when same manger tries to approve from R3 it is working perfectly.
Please let me know what is going wrong with portal ?
Thanks ,
Vinod

Hello All,
Please suggest the solution.
Thanks
Vinod

HOw do I fix the fact that ical jumped (almost) all my events post daylight savings time change an hour ahead?

A few weeks ago I noticed that everything past 3/8 was an hour ahead, and I assumed once daylight savings time changed it would all jump back. It hasn't, and I don't know how to continue scheduling events or if I should change them all. I read that (a few years ago) the suggestion was give it 24 hours to adjust??

I think this problem is more complex. Background - UK clocks went back at the end of October; the USA went back one week later. I am in the UK and my Outlook calendar contains appointments created in the USA.
Someone in the USA created a recurring appointment before any clocks went back. In Outlook everything is correct. The meeting times are the same each week except for the one week between the two clock changes when, quite correctly, the meeting shows up one hour earlier. When I sync with my iPhone, the meeting shows at the same time every week regardless - this is incorrect.
Someone in the USA created a recurring appointment in the week after the UK clocks went back but before the USA clocks did. Outlook correctly shows the first occurrence as one hour earlier than all the following occurrences. Unfortunately - and this is the really nasty bit - the iPhone shows ALL the appointments one hour earlier than they should be. The only one that is correct is the first one.
This is a nasty bug and something that Apple needs to fix.

Can't change 3g 24-Hour time

Just got the new iphone and I can't change it off of military time. Once in settings/date and time it shows 24 hour time but it is grayed out I'm not able to switch it off. Any ideas?

Do a forum search as this question has been asked and answered several times.
For example:
http://discussions.apple.com/thread.jspa?messageID=7579660&#7579660

Outlook sync after Eastern Standard Time Change-All events are 1 hour late

After sync'ing with outlook this past weekend, all my iphone calendar events are 1 hour late. the Eastern Standard Time change must have affected this. The time on my phone and my laptop are the same however. Anyone experienced the same issue?

I had a similar problem with iCal, my Treo 650, and Missing Sync. I found a solution on the Missing Sync website that worked for me -- see my post at http://discussions.apple.com/thread.jspa?messageID=5453855&#5453855.

Evry time after sync. my iphone 4 ios 4.3.3 with itunes 10.3.1.55 the time change up one more hour ,, please tell me what can i do to solve this problem

evry time after sync. my iphone 4 ios 4.3.3 with itunes 10.3.1.55 the time change up one more hour ,, please tell me what can i do to solve this problem

This year, the government has canceled the daylight saving time , that's why happening this problem to me so I changed the time zone in iPhone from Cairo,Egypt (GMT+2 with daylight saving) to Harare,Zimbabwe (GMT+2 without daylight saving , no change in time from summer & winter) & now working good, no change in time after sync. , But it's very stupid thing from apple that they didn't add an option in time setting to enable or disable the daylight saving time like any other mobile.

Calendar events an hour early after time change. Help!

I have a Motorola phone.
When the time changed my phone said "Convert events to current time zone?" And I pushed "yes." Now EVERYTHING in my calendar is set an hour earlier! For example, my son has a class at 10:00 this morning, but in my phone it's been changed to 9:00. It's this way with every event. How can I undo this? I don't want to have to go into every event and change the time back! The clock on my phone is correct. I don't know why the calendar events got converted to an hour earlier.
Kat

I already went in and changed everything manually.
>Personal info deleted<
Kathrine, a phone calendar can be so important to keep track of daily events, so I want to make sure we get this working for you. First, I'll need to know what phone you have so I check to see if there are settings to change the Calendar settings. You can also visit vzw.com/support and select Device for support articles on your device.
MarquiaF_VZW
Follow us on Twitter @VZWSupport
Message was edited by: Verizon Moderator

I think I solved my time changing issues- hope this helps

Hey everyone, I think I've had some success with my time changing issues. I originally posted this to another user as a follow up to her question, but I'm reposting it here. Hope it helps:
"msteinny,
So i went to the apple store to meet with an apple genius to ask him why my phone's time kept moving up 1 hour everytime I synced my phone. Well he said that he's never seen this problem before, and after a trying a reset and restore he let me exchange my phone. The problem is that when I went to sync my new phone the problem still persisted. They told me it was probably something to do with my computer and its time zone settings.
So I get home and click on my computers clock in the bottom right hand corner to bring up the date and time properties and sure enought my time is correct, the date is correct and the time zone is correct (Eastern Daylight Time). So I look through the different tabs (Date & Time, Time Zone, Internet Time). The first thing I tried to do was to change where my computer syncs its internet time. It was originaly set on NIST time. I then switched it to Windows time, but this didn't do anything. My clock would still change when I synced to itunes. The next thing I tried was fideling around in the Time Zone tabs. I noticed that the box that says "Automatically adjust clock for daylight savings" was unchecked, so I checked it and my computer's time jumped an hour ahead. So I left the box checked but moved my clock one hour back (to the correct time), clicked on apply and left it at that. I synced my iPhone and voila! The time didn't change! It stayed on the correct time! To to make a long story short, make sure that you computer's clock is set on "automatically adjust clock for daylight savings changes, make sure your time zone is correct, and that the time is right when that box is checked. I hope this helps you. I'm glad I got a new phone out of the deal;)
Chris P. "

As I mentioned in my post, whenever I checked that box the time would be incorrect. It would move up an hour. I've messed with this along time ago, way before I got my iphone. I think this had something to do with the daylight savings change that was implemented this year or last year. I dont remember if I never tried correcting it before, or if I couldn't, but this time I didn't have any problems correcting it. Anyway, since I couldn't correct it back then, I just left the box uncheck and decided that I would change the time manually when the next time change occurs. But it seems to work fine now so all is well.

Multiple instances spawned after daylight savings time change

This is a known issue and there is an SAP Knowledge Base Article created on this issue:
1448881 - Multiple instances spawned after daylight savings time change
Below is the information from the SAP Knowledge Base Article:
Symptom
Scheduled reports that are supposed to run once a day, run multiple times.
Duplicate instances are being created.
Environment
BusinessObjects Enterprise XIR2 SP5
BusinessObjects Enterprise XIR2 SP5 + FP5.x
Reproducing the Issue
A report is scheduled to be run on a daily basis - this is a Recurring schedule.
Normally the report runs once a day, at a particular time.
After Daylight Savings Time change, the report runs at the specified time, but immediately after the successful instance, another instance is spawned.
Many more instances spawn after each instance completes.
Cause
This is a known issue: ADAPT01318487. This issue is because of DST and how our code handles this change.
Resolution
There is currently no known fix for this issue. There is however a script that can quickly resolve the problem.
The issue it seems is related to Daily recurring schedules.
What this script will do:
it will run a query to display all your DAILY Recurring jobs
you will have the option to choose your jobs and reschedule them by 1 hour
you will then highlight the same job and change them back by 1 hour
by modifying the schedule times, you are modifying the schedule itself and this will keep the issue of duplicate instances from occurring.
Exact Steps to Complete:
Stop the Job Servers.
Double click on the .hta file.
Change the System Name to that of your CMS name.
Add the Administrator's password.
Click Logon.
Click List All Recurring Instances.
Select All.
Make note of what it says in: Schedule Selected Recurring Instances: Should be 1 hr earlier.
Click Reschedule Selected Recurring Instances.
Choose All instances again and change Schedule Selected Recurring Instances to 1 hour Later.
Click Reschedule Selected Recurring Instances.
Now start your Job Servers.
The issue should not occur again.
The Script is attached here, but please review the SAP Knowledge Base article 1448881 as well

Hi Nicola,
- The multiple spawned instances issue ONLY affects XI3 SP3+ only. For XI3 SP1 and SP2 all Fix Pack levels this is not an issue as it was introduced as a problem in SP3.
- 1568239 notes the Java version and can apply to all O/S environments and is updated to reflect that.
If you are located in Europe you can also apply the patches in advance of the DST change to avoid the problem. If you are in Americas at this point utilizing the clean up scripts for this year is the approach needed to clean up the spawned instances and reschedule the existing schedules.
Thanks,
Chris

Since Time Change, iCal and iPhone Calendar Time Are All Messed Up

Ever since the most recent daylight-savings time change, I noticed all events I created in iCal, when synced with my iPhone, became an hour off. If I edit the event on the iPhone, it stays the correct time on my iPhone, but when it syncs with iCal again, the time on iCal goes off by another hour, even though the time for the event on the iPhone stays correct. (Hopefully that makes sense) Has anyone else experienced this problem? It is incredibly annoying, because now I have no trust in any of my calendar entries as to what the correct time is.
As an example: I created an event for Sunday the 16th on iCal on my Mac for a 1-hour soccer game from 8:00PM - 9:00PM. When I synced my iPhone, I noticed a few days later that the event on my iPhone now said the event was from 9:00PM - 10:00PM...one hour off! I edited the event on my iPhone, and re-synced. Now my iPhone has the correct time (which I manually edited on the phone) but iCal now says the event goes from 7:00PM - 8:00PM. Again, an hour off, but in the reverse direction (an hour off early, rather than late). When I sync now, even though the times on the iPhone and the times on iCal don't match, they do not change...it's as if either the computer or the phone didn't recognize daylight savings time or something, and thinks it has the correct time for the event. Both my Mac and my iPhone's clocks do display the correct time and date, however, so it's not like the system clock is off. It is completely bizarre, and I entered my entire teams schedule this way, so ALL games were off, and now is completely screwed up. Please help.
Message was edited by: Hamster Huey
Message was edited by: Hamster Huey

Yes, I did. I posted an identical post in the iPhone forum since no one answered here. http://discussions.apple.com/thread.jspa?threadID=1791145&tstart=0
The first reply solved the problem. It involved the Time Zone setting in iCal Advanced preferences for me.

Time change for daylight savings and Alarms not working correctly

we have 3 iPhones in our house. 2 were set to auto time change for daylight saving and one wasn't. 1 did the auto time change with out an issue and all alarms worked ok. The other 2 have had issues with not been able to set the alarms ie set alarm for 0630 and it goes off at 0530 even though the time is set correctly. The 1 that was set to autotime worked fine until I switch auto time off, now the alarms on this one wont work either. well they work but just at the wrong time. The 3rd phone will allow alarms to be set, but the alarm will go off an hour earlier and this phone will not allow the alarm to be set for 0630 at all.
Has anyone had this issue and resolved it. It makes getting up for shift work a right pain..

Read here:
http://www.appleinsider.com/articles/10/10/11/applesays_ios_software_update_to_fix_pesky_alarm_clockbug.html

Switching from 12 to 24 hour time in ical - disappearing times

I live in the US, but I wanted my clock to change to 24 hour time. I did that, but then my region has to be custom and now the time displayed on the left has disappeared. I don't feel like this should be so complicated, but... it is. So I looked up how to change the time, and it worked, but the numbers disappeared and that's not very helpful since that was what I was trying to change. I can even change it back and they're still gone.

Never mind! I restarted iCal (not sure why I didn't think of that before) and the time display on the left returned! But still, I hope for a simpler option for switching to 24 hour time in the future. All you should have to do in my opinion is click on a check box or bullet.
So people with disappearing time displays may want to attempt that.

How can I make the "add event" dialog in Lightning use 12-hour times?

The Add Event dialog in Lightning (on an iMac running OS 10.10.2 Yosemite) is displaying 24-hour times in the dropdown boxes. I need these to be in 12-hour format.
Also, the default calendar needs to be changed. Where are these preferences located?

I don't know what the acceptable setting values are, but you could experiment with
''calendar.date.format''
in the config editor. '''[http://kb.mozillazine.org/Menu_differences_in_Windows,_Linux,_and_Mac Tools|Options]'''|Advanced|General→Config editor
Mine is set to 1 and it's faithfully copying the date/time format I use elsewhere, but that may just be coincidence. But I suspect it is simply the toggle between long and short date formats as offered in the Options GUI for the calendar.
Bear in mind that all those AM/PM indicators will eat up precious screen real estate.
Settings for the Calendar are under Tools|Options (on Windows); that'll be Edit|Preferences or Thunderbird |Preferences.
'''[http://kb.mozillazine.org/Menu_differences_in_Windows,_Linux,_and_Mac Tools|Options]'''

1/2 Hour Time Shift in the Map Module

A quick search didn't find anything, but this was mentioned on the Lightroom channel on YouTube (http://www.youtube.com/watch?v=I662DDxQQUI). When working with tracklogs in the map module, LR allows one to timeshift the data to allow for time zone changes between the camera and the GPS receiver creating the log (‘Set Time Zone Offset’ in the Tracklog dropdown menu). However, some countries like Canada (Newfoundland) and Australia have 1/2 hour time zone shifts as well as one-hour time zone shifts, so it would be a good idea to have the shift broken down into 1/2 hour increments.
Mike.
Update: I just had another look at this, and while the slider moves with the mouse in one-hour increments, one can manually type in an offset of whatever time, so 3.5 hours for example is possible. Never mind!!
Leaving this here in case anyone else is wondering...

Check if "Time Zone Support" is turned on. If it is turn it off.
Settings->Mail, Contacts, Calendars->Time Zone Support (down at the bottom).
When this feature is on it displays even dates and times in the time zone selected for calendars. This must be 2 hours difference in your case.
Marke

1 hour time change

Similar Messages

Maybe you are looking for