MSS: Approval of Working Hours - Working Times Changed Subsequently/Locked

Dear All,
I am facing one issue while approving the CATS working hours in portal through MSS.
We are using task TS31000007 for approval.
In our CATS profile we have input fields as:
CO Area, Send. CCtr, Activity Type, Rec. Order, Oper./Act., Work center, Plant , Att./abs. type, Wage Type, Acctg Indicator
When user enters the working hous only against Att. / abs. type, the manager gets the task and approval/rehjection happens successfully.
But when user mentions the other fields as well in addition to Att. / abs. type, and saves the hours, the manager can see the task. But when manager tries to approve/reject the working hours he gets message like below:
At this time, you cannot save the following working times since the employees working times are currently being processed or have just been changed.
Save any other data first and wait a few moments.
You can then choose Back and attempt to save the data again. Your approval decisions are retained but you might see data that is out-of-date.
Alternatively, you can restart the application to see the changes that have been made to this data.
Working Times Changed Subsequently or Locked
Employee Date Number Message
21 29.09.2008 4.00H Not possible to save: Record has changed
But when same manger tries to approve from R3 it is working perfectly.
Please let me know what is going wrong with portal ?
Thanks ,
Vinod

Hello All,
Please suggest the solution.
Thanks
Vinod

Similar Messages

In iMovie when I try to share a project to a file on an external hard drive it will work the first time but subsequently it says it is sharing but gives no time and file name and in fact just sits there not sharing the file.

I have iMovie 10.0.4. I want to transfer some old DV tape videos to MPEG 4 files to be stored on a 4 TB external drive. I successfully imported the video to iMovie, created a project by moving all captured files into a project and the first time I shared the project to a file it worked as expected. Every subsequent try to transfer another video would fail to transfer. When I clicked save it gives the warning that it is too big for iCloud, iso I click create on this computer. The progress circle comes up with no indication of progress. The show activity drop down just says sharing to "file" no file name as in the first one and indicates no time remaining. In fact it just sits there apparently doing nothing. I'v tried it a half dozen times, deleted everything and started over. It transfers the first project to file and then nothing on additional tries. What do I have wrong, am I missing something?

In iTunes 11 uncheck the preferences setting in in the iTunes Preferences panel "Advanced > Copy Files to iTunes Media folder when adding to Library"

Macbook, iphone and iPad all off by 1 hour since time change

How do I correct this?

On your iPhone and iPad go to settings>general>data/time> toggle set automatically

Daily working hours calculation but Half an hour flexi before start of planned time & shortfall hours calculation

Dear All,
I want to calculate daily working hours but Half an hour flexi before start of planned time & shortfall hours calculation if a person didn't completed 9 hours job.
We have different types of DWS, PWS & WSR for different PS/PSA & EG/ESG groupings.
We have a requirement for Executives/Officers (E0-E8/ S1-S2) for only one PSA (1100) for only one DWS(GFLX). In this requirement I want to calculate daily working hours but Half an hour flexi before start of planned time & shortfall hours calculation if a person didn't completed 9 hours job.
Please see the requirement and my configured DWS and PCR's in detail with example and suggest me the solution:-
Overview
I want to calculate (Please take the reference from DWS screenshot)
daily working hours, but starting from first Begin Tolerance Time
Shortfall of hours if 9 hours not completed, but again starting from first Begin Tolerance Time, although employee has come before Begin Tolerance Time
I've configured one DWS as below,
Requirement:-
The planned shift timings is 9:30 - 18:30. Employees should work and complete 9 hrs in a day, but this 9 hours should be counted only from 9:00 (i.e. Begin tolerance time). It means. In time should not consider before 9:00.
1. Suppose 1st day employee punch In time is 9:00 then he has to work up to 18:00, then only 9 hours of working will be completed & no shortfall will be calculated.
In above case, if Out time is 17:00 then shortfall will be calculated 1.0 hours, because his working hours will be counted 8 hrs only.
2. Suppose 2nd day employee punch In time is 9:45 then he has to work up to 18:45, then only 9 hours of working will be completed & no shortfall will be calculated.
In above case, if Out time is 18:00 then shortfall will be calculated 0.75 hours, because his working hours will be counted 8.25 hrs only.
3. Suppose 3rd day employee punch In time is 8:30 then he has to work up to 18:00, then only 9 hours of working will be completed & no shortfall will be calculated. (In between 9:00 - 18:00 ). Here In time is 8:30 but system should consider and count from 9:00.
In above case, if Out time is 17:30 then shortfall will be calculated 0.5 hours, although he has worked 9 hrs.
4. Suppose 4th day employee punch In time is 10:11 then he will be marked as Late Come(as per DWS) and then he has to work up to 19:11, then only no shortfall will be calculated, because he completed 9 hours.
Now the below PCR is calculating Daily Working Hours,
Now the below PCR is calculating Late Coming Hours,
Overview
I know that use of begin tolerance time is different in from my requirement. Please guide me if this DWS configuration will not work.
As of now system is able to calculate Daily Working Hours (but not from the begin tolerance time), Late coming days and Late coming hours, but shortfall is not getting calculate properly.
Please give me the idea how to write PCR for these requirement, I know that my ZDHR PCR (Daily Working Hours) needs to change or replace to fulfill this requirements.
If you want any other details please let me know.
Best Regards,
Deepak

Hi Sankarsan,
After changing the function PTIP and I used GEN in PAR2, because in PAR3 error was coming.
After the changes PCR is processing as below for three different IN time :
1. when IN time is 8:45
and in this case, ZES table No Time type is showing which is wrong because he worked from 8:45 to 18:30 it means 9:30 hours (calculation should start from 9:00 am).
2. when IN time is 9:15
and in this case, ZES table Time type 9002 is showing 9.25 hours which is correct because he worked 9.25 hours.
3. when IN time is 10:30
and in this case, ZES table Time type 9003 is showing 9.00 hours which is wrong because he worked only 8 hours.
Pls suggest.
Best Regards,
Deepak

Assigned Working Hours Display

Hi,
For evaluating Workforce Management, I am running transaction CM50 for specific Work Center and have followig data for this WORK CENTER -
Entries -        Rem.cap.reqs   -   Avail.capacity -   Rem.a -     Rem. avail. capaci
Total     --- ---    222,012 HR      --- ---    824,0 HR       ---    --- --- --- --- --- --- ---   601,988 HR
25.03.2011   ---          7,048 HR   ---   ---       8,0 HR      --- --- --- --- --- 88,1 ---       ---     0,952 HR
26.03.2011   ---         3,524 HR    ---   ---      8,0 HR       --- --- --- --- --- 44,1 ---        ---     4,476 HR
27.03.2011   ---         3,524 HR    ---   ---       8,0 HR       --- --- --- --- --- 44,1 ---        ---     4,476 HR
28.03.2011   ---         3,524 HR    ---   ---      8,0 HR       --- --- --- --- --- 44,1 ---        ---     4,476 HR
29.03.2011   ---         3,524 HR    ---   ---      8,0 HR       --- --- --- --- --- 44,1 ---        ---     4,476 HR
Here 222,012 HR is the Rem.Cap.Requested hours.
From CMP3 Transaction, for a employee, I am booking 3 hours daily from 26.03.11 to 29.03.2011(total 12 hours). When I am again running CM50 Transaction, these 12 hours should also add in 222.012 Hours because it's already allocated and I must see - 234 Hours updated. But I am not able to see that. Am I running wrong transaction to review the updated data or am missing something else so that I will get updated Working Hours evaluation data, everytime I allocate hours to someone. Please let me know. Shall I see some other transaction?
Thanks and Regards,
Roshan Gupta
Edited by: Roshan Gupta on Mar 25, 2011 3:22 PM

Solved by myself.
In this case, planned working hours was not changing the reports data that I illustrated above. Actual Working hour was affecting the data.
Thanks,
Roshan

MSS approval Working time

Hi gurus,
We are using MSS 1.0 and EP 7 .I have a small problem.For the approval working Time we are using task TS20000460 task and we modified it based on the requirement of the client .Now we have discovered that when manager approves the time in MSS , the infotypes are updated automatically which the client does'nt want that to happen.Is the MSS approval will work the same way or it's because of workflow.Is there any setting to be done so that when the manager approves it the update will go into the CATSDB table but not the infotypes.
Reply is needed very urgently on this.
Thanks in advance.

Hello,
You need to update the CATSWF transaction not to transfer immediately. Also in the approval profile for the iview SAP_Line uncheck the box to transfer immediate.
Hope this helps and maybe by now you have found your answer.
Maritza

Time change for daylight savings and Alarms not working correctly

we have 3 iPhones in our house. 2 were set to auto time change for daylight saving and one wasn't. 1 did the auto time change with out an issue and all alarms worked ok. The other 2 have had issues with not been able to set the alarms ie set alarm for 0630 and it goes off at 0530 even though the time is set correctly. The 1 that was set to autotime worked fine until I switch auto time off, now the alarms on this one wont work either. well they work but just at the wrong time. The 3rd phone will allow alarms to be set, but the alarm will go off an hour earlier and this phone will not allow the alarm to be set for 0630 at all.
Has anyone had this issue and resolved it. It makes getting up for shift work a right pain..

Read here:
http://www.appleinsider.com/articles/10/10/11/applesays_ios_software_update_to_fix_pesky_alarm_clockbug.html

Time updation for Support desk message and business calender working hours

Hi Experts,
I would like to know how to set the time updation of Support desk message in CRM_DNO_MONITOR. After i receive a new message in it, I can see the from timing and to timing (even after changing the status of message) as 00:00:00. Is there any standard job to automatically update the timing of message?
Also i would like to know, how to set the working hours for various days. Lets say i want to set my business hours for Monday from 10am to 6pm and for Tuesday as 9am to 5pm.
Suitable points will be rewarded.
Thanks in advance,
Naresh Dodeja.

Hi,
The reason is "created by me" selects the role "Creator" of a message/notification.
There are three roles "Creator", "Contact" or "Reporter" and "Responsible" or "Processor".
The creator is identified by his user name and the others by their BP-ID.
Therefore using the report "created by me" does not work if your users are defined for BPgen only.
That it works you have additionally to define in BP the role "BUP003 - Employee".
You find in the transaction BP for "BUP003 - Employee" in the tab "identfication" a field "User Name".
If you enter the User-ID the user has in the Solution Manager then it works.
Good look!
Best regards,
Adelbert

Work Hours Threshold changing ,what effects?

Hi Gurus,
We are planning to change the threshold of Payperiod hours from 80 to 86 hours. Please suggest me how this affect present configuration in Time and Payroll. The present configuration is for 80hours bi-weekly. Anything greater than 86 hours per payperiod is paid @1.5 times and anything greater than 80 and less than 86 is paid @1.0 times.
My Question if the threshold is changed from 80 to 86, what configurations/considerations need to made in Time and Payroll and also Py-FICO posting.
Thanks in Advance

G
Ideally I think your talking about this situation. DWS =8 ,PWS=5 Weekly =40 Monthly = 52/1240 =173.33 and Yearly 5240 =2080
As per you requirement I Think client want to pay more than 176 hours worked. For this you have to maintain them in over time rules and T511k Tables , here you can also make 173.33 to 176 as these value will be reflected in IT0008 .for deriving the hourly rate of pay which is used in all the pay related calculations.
Veda

In iCal, "Available Meeting Times" greys out working hours one day off, MS Exchange

I am using iCal, accessing an MS Exchange server. When setting up a meeting, "Available Meeting Times" greys out the non-working hours of potential meeting participants. However, the days are one day off. E.g. the working hours of my collegues are displayed are Tuesday-Sunday instead of Monday-Friday. The dates and times of meetings are relayed correctly. Only the display of the working hours seems to be off.
Needless to say that my collegues are using Windows Outlook, and everything works there.

I still have the same issue. Had it ever since at least 2010 and meanwhile we switched Exchange-Servers and I'm on Mavericks, but still. Looks to me as if iCal requests something like "getWorkDays" from teh Server. The Server probably replies [2,3,4,5,6]. When the week starts on Sunday, this is perfectly fine. But if the Week starts on Monday, this will give you Tue-Sat as available Days. So it might be a bug in either Exchange or iCal to treat that information correctly, but I'm not obv. not sure about that.

I recently did the iOS 7.0.2 update, now I'm unable to purchase apps. "App could not be purchased at this time. Please try again later. ". I have tried a few of the suggestions and nothing has worked. Reset,change auto lock time on main screen, now what??

I recently did the iOS 7.0.2 update, now I'm unable to purchase apps. "App could not be purchased at this time. Please try again later. ". I have tried a few of the suggestions and nothing has worked. Reset,change auto lock time on main screen, change language setting. Now what???

This sorted it for me:
Backup your iPhone to iCloud (I believe backing up to iTunes will work too). Now go to "Settings --> General --> Reset --> Erase All Content and Settings" to completely restore your iPhone to factory settings. Assuming you've backed up to iCloud, you'll be asked when setting up your iPhone if you want to restore from an iCloud backup. Choose that option and once your iPhone has restored itself from your backup, this annoying problem will finally be gone! (was for me anyway).
To restore from an iTunes backup, connect your iPhone to your computer, load iTunes. Click the File menu and select Devices > Restore from Back up.

I have the converter to change pdf to word. Works sometime, other time says conversion is taking too long. Can I get what it has translated so I can use the parts?

I have the converter to change pdf to word. Works sometime, other time says conversion is taking too long. Can I get what it has translated so I can use the parts?

I would ask in the ExportPDF forum, Adobe ExportPDF (read only) (assuming that's the service to which you have subscribed). This is the Reader one.

Hello, I have a problem, my computer is interrupted very often CAN I changed Maveric when working and 15 times a day is very disturbing and nustiu what I do is not only blocking and restarts

hello,
I have a problem, my computer is interrupted very often CAN I changed Maveric when working and 15 times a day is very disturbing and nustiu what I do is not only blocking and restarts

If you are getting Kernel Panics, this article (available in many languages) will explain how to find the reports. You can post the latest one here for Readers to help you:
How to Log a Kernel Panic

Capture travel time expenses and working hours spent on the service call

Hi Experts,
I have One Year AMC contract with my customer.Under AMC he called me for 10 times.I need to
Capture travel time expenses and working hours spent on all the service call, Non of them will be billed to the customer.
This is just for our internal tracking.this particular data will reside within the office premises.
Explain how efficiently we can track this particular requirement in SAP Business One
Regards,
Vikram

Hi Vikram
You will notice on the item master records that there is a field called Item Type. The options are Item, Labor and Travel. In order for the service module to recognize the expense or charge type, either Labor or Travel must be select. Create a service item (untick inventory item) and choose the Item Type as Labor or Travel. When you now create a Delivery/Invoice from the expenses section of the service call, it will identify and warn you if you charge the customer, as this would be defined in your service contract template as non billable charges. You can still create a Delivery for the charges and put quantities and values on the Delivery document. In this case you are not going to invoice the customer for the charges, so you can "Close" the Delivery. Just be aware that closing the Delivery will post the value to an offset account defined in the Account Determination.
The benefit of this approach is that the Delivery will post a debit and credit in your G/L that will "accrue" what the costs are of servicing the customer. My suggestion would be to set the account determination for the Labor/Travel item(s) to item level and define the Revenue/Expense accounts to specific G/L accounts.
Let me know if you need more information or assistance with the above.
Kind regards
Peter Juby

Firefox stop to work in one time,and i have to restart all because ff dont wor when i try to change page with mouse

firefox stop to work in one time,and i have to restart all because ff dont wor when i try to change page with mouse

Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
* Don't make any changes on the Safe mode start window.
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]
If it does work in Safe-mode then disable all your extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
* Use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
* Close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")

MSS: Approval of Working Hours - Working Times Changed Subsequently/Locked

Similar Messages

Maybe you are looking for