10.1.0.4 upgrade documentation question

Hi:
In the accompanying documentation (section 5.1.7) it says, "If any database uses Java Virtual Machine or Oracle interMedia, then install the Oracle Database 10g Products installation type from the ... Companion CD before installing the 10.1.0.4 patch".
What does that mean? What is the "installation type"? I assume since I already have the interMedia stuff running on a 10.x.x. database I have already loaded whatever I need from the companion CD. Is this saying to do any upgrades from the 10.1.0.4 companion CD section before applying the database patches or what?
Thanks.
MJG

Here's what I did. (Windows XP server)
* Installed Oracle 10.1.0.2
* Installed 10.1.0.2. Companion CD
* Installed "10g Products" from the 10.1.0.2 companion CD
* Installed 10.1.0.4 DB patch
* Installed 10.1.0.4 Companion CD patch.
Now I am in the "post processing" phase, trying to do a
STARTUP UPGRADE
but I get an error "SP2-0714: invalid combination of STARTUP options"
Does anyone know what's behind this? Did I need to run the catpatch.sql before installing the companion CD parts of the 10.1.0.4 patch?

Similar Messages

Upgrade/Compatibility question

Hello, We have OIM 9.1.0.1849 and are connected to exchange 2003 now. We are neck deep in the design phase of migrating to Exchange 2010.
My question is a two-parter. Is our current version of OIM compatible with Exchange 2010 assuming we don't need any further functionality than what we have now? If not, what version do we need. If you're gracious enough, could you tell me why I need it?
I've tried reading documentation, but just got more confused.
Thanks!

What version of the connector are you using? Version 9.1.1 is supported on:
Microsoft Exchange 2003
Microsoft Exchange 2007 (on x86 or x64 computers)
Microsoft Exchange 2010
If you need to use a new version, any connector is "upgradable" with the appropriate skill set. You could import the latest connector (assuming it's the same name for the resource object) and then run the form version control utility to upgrade the form for all your users. And then going through the provisioning process definition to make sure the correct tasks will trigger at the correct time.
-Kevin

Migration Documentation question

Hi,
We are trying to follow the "How To Migrate from SAP Enterprise Portal 5.0 SP6 to SAP NetWeaver '04" documentation, but have questions and open OSS messages.
Does anyone have a set of documentation and or notes that can be followed to a completion of the migration? Any additional notes that may not be in the documentation or at least clear in the documentation?
Open questions:
1. Question on connectivity to the EP5 system from NW04 for migration; In the above mentioned documentation on page 42 in the section 3.2.8 "Defining and Configuring a System for EP5" number 4, it asks for an EP50 Server Port. Is this the default port 80 or is there a way to determine which port to use for this entry?
2. Page not displayed on service configuration; We have our NW04 SP14 Portal build working with Windows Integrated Authentication and our corporate LDAP for Single Sign On with our network ID's. When we login
to the Portal with our network id, we get "Page cannot be displayed" when navigating to System Administration-> System Configuration-> Service Configuration to add the migration key. If we login as Administrator, we can see the Service Configuration page and drill down
to applications - >UpgraderService.
Why does this page not render with our network id's as our network id's have the same roles as Administrator?
Any thoughts on the above questions and any help with better documentation will be greatly appreciated.
Best Regards,
Rick

Thanks, I appreciate your input!
On 8/24/2010 9:36 AM, kjhurni wrote:
>
> Ah, I see.
>
> So if you have a LUN (vdisk, whatever your SAN Vendor calls it), and
> let's say you have 2 or more servers that can access it, but you have
> NOT installed the NCS stuff yet.
>
> I THINK that unless the server try to mount it (and I think you'd have
> to enable the partition/pool thingy as "clusterable") you should be
> okay.
>
> But don't quote me on that one.
>
> I'm also thinking that before you make the resource
> "sharable/clusterable" that you have to install NCS but then make the
> "shared" LUN as shareable before you go making up the Cluster Resource
> objects.
>
> the only exception to that may be the SBD partition (that has to be
> shareable first I think)?
>
> It's been a LONG time since I installed clustering (ours was like 8
> years ago so we've just done upgrades since then).
>
>

IPhoto '08 to iPhoto '11 Upgrade PROBLEM & Questions

Despite all the negative reviews at the App Store about iPhoto '11, I decided upgrade from iPhoto '08 so I could conveniently upload photos to FaceBook from iPhoto. (The FaceBook Uploader for iPhoto never worked for me.) I thought the ratio of negative reviews were unbalanced because people who are satisfied with the product have less motivation to write a review. Maybe I was wrong.
My problem:
I only bought iPhoto '11, not the iLife package, from the App Store. When I first opened iPhoto '11, I was warned that my library would no longer be readable by earlier iPhoto versions. No problem, I expected that. As I had somewhat over 15,000 photos in my iPhoto '08 Library, I was also notified that that it would take an hour or longer to rewrite the library. No problem, I expected that too. iPhoto first read my old library, then started rewriting. When the rewriting progress bar was just past halfway, iPhoto '11 suddenly quit and sent an "iPhoto Problem Report" to Apple. This has happened about 5 times now, both before and after restarting my computer. It might seem related to free disk space, but I just put in a new 750Gb hard drive with over 400Gb free. All my other specs also meet or exceed iLife's requirements.
My Questions:
1. Can anyone suggest what they think the problem is and how to proceed? I couldn't find a similar problem in the Apple Support Community.
2. If I can't upgrade, how do I go back to iPhoto '08? I backed up everything to an external drive using Time Machine before trying to upgrade. I know there's a iPhoto Library file in Pictures but there's also another file somewhere that contains the data for titles, events, comments and edits. How do I find it and how do I restore them to my MacBook?
3. Can I get my $14.95 back from Apple? I don't see a way to talk to Apple without costing me more than the $14.95
Any help will be GREATLY APPRECIATED!

What's happening is that some file (or files) in the Library are damaged in some wy and that's tripping up the upgrade. This file (or files) may not necessarily be photos but could be one of the background database files. Unfortunately there's not any real way of knowing.
Any time you upgrade or update an app or the OS you run the risk of exposing a problem that has bee hidden heretofore. That's why you make back ups.
Possible solution: Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Reverting means restoring your Librry from Time Machine and re-installing 08. It's not a big thing to do.
Contact App Store support about a refund. There's an email link on the right hand side of the app store window.

BW Authorization Error documentation Question

Hi,
I have a question, may be you can help in this:
Q: In BW Analyzer if we get the following authorization error for some reason:
->Authorization Check
You do not have authorization for Add or Create
There is a Details tab to see the authorization error details. I need to add documentation for the naming conventions the Users need to use so that it's easy for Users to see what is the reason for the error and what naming convention do they need to use to prevent the error.
Right now, details tab shows "No Documentation Available". How can I add documentation here? Where do I add this documentation and how do I link it to the Authorization Error Message's Details tab?
I tried running RSRTRACE to see which function modules/programs get called but that does not help. It gives me the following two function modules which are being called when I get the error message and when I click the details tab:
RZX0_MESSAGES_GET
RZX0_MESSAGE_H_GET
and surprisingly when I try to look them up in SE37 they do not exist What can be the reason for this?
Is there a system transaction, like .. SM02, in BW where we can define or create authorization error message documentation for BEx Analyzer? How do I link it to the Authorization Error message?
Your help or advise will be very much appreciated.
Thank You,
Regards,
Mandeep Virk

It can be done via SE91.
Message Class is R9 and message number is 108
We have to define the Long Text and save it under the RSZ class.
It works for me now.
Thanks,
Mandeep

MacBook Pro hard disk upgrade shows question mark folder

I recently bought a 1TB hard disk for my teenaged daughter's MacBook Pro.
I formatted it, used Carbon Copy Cloner to clone the existing drive. I even made sure to create the recovery partition.
I restarted while holding the option key and chose the new drive. It booted fine so I checked in System Preferences to make sure it was selected as the boot device.
I opened the case and swapped the drives. Put it back together and restarted only to see the question mark folder!
I tried booting while holding the option key and now I get the choose a network prompt.
I am desperate and hate the thought of disappointing my daughter. It used to be that I was her hero who could fix anything now I'm the guy who asks too many questions and doesn't put enough money on her debit card. Granted she busts her butt getting awesome grades and I was upgrading her drive so she could continue her video yearbook for her school. So I shouldn't complain but it would be great to be her hero again.
BTW, I am not a newbie to the tech world but I don't do nearly as much in the Apple arena as I do in the PC world. Then again I've been a senior tech in the industry sine before IBM had a PC. In fact, my first real work was on a 6502 processor that used the same machine code as the Rage of the day, the Apple ][. All that to say I usually can find my way around a problem but this one has me stumped.
I appreciate any assistance offered.
Thanks,
Thom

I tried to reboot with the option, command P. And R keys pressed. I heard the ding several times it still showed the question mark! I also tried the shift option and it only displayed the network selection. Also I tried to press C so I could boot from USB and it didn't work either.
If I cannot get this to work I fear my only other choice is to use a FireWire enclosure. This isn't a good option as my daughter does mostly movie work and iMovie has this terrible "feature" that forces all movies to be stored in one place. It sure would be handy if it allowed movie projects to set the storage location individually. I suppose I could simply move all the movies to the drive and try to find a way to point all iMovie projects to the external drive.
Unfortunately, my daughter is one of those Mac users who isn't savvy enough to use anything but the default settings. Heck I've tried to explain to her that she ought to get rid of the big files once she has done her work. That's why her drive is always full.

UPGRADE ASSISTANT QUESTIONS for ECC6.0???????911

I have used upgrade assistant in the past for 4.6C and 4.7 upgrades and had no problems. I am having trouble getting the assistant to work through the internet browers. I need help with a couple of questions:
First: Do I need do a prepare and SERVER option like I had in the past with R3UP?
Second: Is there anything special that needs to be done for ports 4239,4240,4241. I can reach my server through the internet of some of the ports that R3 uses.
It seems the java is not recognizing my i5 server and I am not sure where the disconnect is.
This is the error I am receiving when I try to start the upgrade assistant:
ERROR: Unable to load resource: http://sapdev:4239/ua/uagui.jnlp

<?xml version="1.0" encoding="utf-8"?>
<jnlp spec="0.2 1.0" codebase="http://SAPDEV.SWIRECC.COM:4239/ua" href="uagui.jnlp">
<information>
    <title>Upgrade Assistant</title>
    <vendor>SAP AG</vendor>
    <description kind="short">SAP Upgrade Assistant</description>
    <icon href="http://SAPDEV.SWIRECC.COM:4239/ua/pics/sdtgui_big.gif"/>
</information>
<security>
    <all-permissions/>
</security>
<resources>
    <j2se version="1.4+"/>
    <jar href="uagui.jar" main="true" download="eager"/>
</resources>
<application-desc main-class="UaGui">
     <argument>-host</argument>
     <argument>SAPDEV.SWIRECC.COM</argument>
     <argument>-port</argument>
     <argument>4241</argument>
</application-desc>
</jnlp>

Usually it's done like
- PREPARE
- exchange SAPup with the newest version
- add your application fix <application>_FIX to /usr/sap/put
- $JAVA_HOME/bin/java -cp /usr/sap/put/ua/ua.jar UaServer
- give an administrator password
After that the UA should listen on port 4239
You can verify that on the machine via
netstat -tn | grep -i LISTEN | grep 4239
Also check that you have either no proxy or add the box' name to the exception list of the browser (because Java uses that exception list too).
Markus

ISE 1.2 to 1.3 upgrade clarification question

I am looking to upgrade from ISE version 1.2 to version 1. 3 and am reading through the upgrade guide. The basic steps they outline are to create a repository pointing to disk: and then run the application upgrade prepare using the new repository. They say the prepare should copy the file to the local repository and list the MD5 and SHA256 checksum.
Do I not need to "copy" the file to the server before the prepare or is there a different format for specifying the file on the prepare step? It seems this is looking for a local copy instead on on my FTP server but any format I use to try to specify my FTP server is not working.
The documentation simply gives application upgrade prepare {filename} {repository}.
Brent

Hi Brent,
To prepare upgrade you need to get the support bundle on the local disk.
conf t
repository local
url disk:/
exit
exit
copy ftp://<repository_url>/ ise-upgradebundle-1.2.x-to-1.3.0.###.x86_64.tar.gz disk:/
To upgrade using this file, use the following command:
application upgrade ise-upgradebundle-1.2.x-to-1.3.0.###.x86_64.tar.gz local
You can use prepare to put the file in local repository that you created and then use proceed to upgrade.
Also, visit this link for upgrade details:
https://supportforums.cisco.com/blog/12341806/upgrading-identity-services-engine-ise-13
Regards,
Kanwal
Note: Please mark answers if they are helpful.

Documentation question...

Hi all,
While attending a class in Newtown an instructor suggested there is documentation available for SAP authored function modules. So, my question is this...I'm using function module md_mrp_list_api and I'm interested in reading some documentation...where or from who would I request such a thing if it actually existed?
thanks,
Mat

Hi,
Not all Function modules will have the Documentation.
SAP Generally provides documentation for those function modules which are meant for Generic services.
Function modules which have some Functional significane may or may not have the documentation.
You can check for function module documention in Tcode Se37.
Regards,
Sesh

Health Report for existing role in support and upgrade documentation

Hi Experts,
I am looking for create a report or using existing report/FM (if any) which will show new objects been thrown for a role with there SAP suggested values when we use PFCG expert mode merge option. I think this will be very helpful for support person to health check for roles and during upgrade in step 2C documentation people can save a hell lot of time. I do not have ABAP knowledge. Can anyone help me on this?
Regards,
Arpan Paik

Hi Julius,
I have been to that wiki before and one by you as well (regarding upgrade steps). For current upgrade I have also noticed that SU25 step2B is not only left with customer related changes only. Where USOBT_C/USOBX_C has same values as of USOBT/USOBX there update to customer table automatically happened in step2A. So 2B left with very less changes where customer prefer the standard way!!!
What I am looking for is actual authorization change delta. Step2C gives us only list of roles get affected. I am lookimg for what change actually can happen to a single piece of role due to upgrade.
I have followed below method.
1. Join table USOBT_CD and USOBT_C to see actual proposal for changed transaction and corresponding auth object. Here I had to perform few excel work to remove data repetation
2. Then take old data for roles from AGR_1251
3. Put together above 2 data and after proper sorting by object manually remove the data which SAP does by expert mode merge function.
Can this step be automated by some ABAP code? or function module?
Otto wrote :
If I start/ when I start and still remember this thread, I will update it
Please do so and thanks for sharing thoughts.
Regards,
Arpan Paik

Upgrading OS questions

I need to upgrade my MacBook Pro's OS from 10.5.8 to be able to sync with my iPhone. My questions are:
1) How far up do I need to go? I do have the CD for Snow Leopard, will this be enough to get the most recent update of iTunes? (haven't installed Snow Leopard yet)
2) I'm using Microsoft Office 2008 (Word only) 12.1.0 and have read that it must be updated also. Can I update straight from 12.1.0 to the most recent 2008 update, which appears to be 12.3.6?
I guess those are my main questions. All I really need/want to do is to be able to sync my iPhone again. I would appreciate any comments, suggestions, advice on this. Thanks!

1, 10.6.8
To upgrade to Snow Leopard 10.6, you must purchase the Snow Leopard install DVD from Apple.
Backup first.
2, Ask Microsoft, since it is their product
Allan

P67A GD55 Rev B - Upgrade Bios Question

To be honest, this post supposed to be a private message to Svet, but turned out a newbie like me who just joining the forum is not allowed to send PM...so apology if this questions are being asked so many times already:
Dear svet,
Really need your help in clarifying something, to make it short here are my questions:
First here are my PC Specifications:
MSI P67A-GD55 rev B
Corsair Vengeance 2x4GB XMP Enabled
PSU Corsair X750W
Intel Sandy Bridge i5 2500k
OS Windows 7 x64
1. I have upgraded my GD55 rev B bios to the latest bios available here: msi.com/product/mb/P67A-GD55--B3-.html#/?div=BIOS
which foolishy I didn't read the warn that it will not work proeperly for Sandy Bridge
2. The bios update/flash was a success, now I have the ver II click bios, completely different with the first version. With this bios I managed to OC to my previous OC speed (4.2GHz in OC Setting by changing it into 42 multiplier and set the Vcore to 1.35)
3. The reason that I updated my bios in the first time was I often experience 0x50 error while gaming certain games, and I thought upgrading bios is one of the solutions for it (after trying to change my RAM, changing my GPU, and my PSU to no avail)
4. Then I stumble to this post of yours: https://forum-en.msi.com/index.php?topic=164135.0
with some fix in the 434 version states like this: "05.Fix system reset on 0x55 issue when use Sandy Bridge G440 CPU and install two 4G memory."
I am completely not sure whether this is related to my 0x50 BSOD or not, but really hoping that it is.
So my question is, should I upgrade/downgrade to your first post BIOS? (E7681IMS.434) or should I upgrade/downgrade to the latest beta 439 Bios (E7681IMSv439.rar) as the fix in 434 are included in 439?)
Thank you so much in advance for any help...
Regards,

Quote from: Froggy Gremlin on 09-April-13, 15:26:46
While waiting for Svet to respond, I will tell you that BSOD 050 is not enough DRAM V. being applied. It's rather a shame you didn't open a thread in the regular part of the forum, or the OC section of the forum asking for assistance 'before' flashing an Ivy support UEFI/BIOS.
That CPU is most likely capable of OC'ing to 42X easily on Auto CPU voltage while maintaining all the power saving features. VDroop set to Low or 100% depending on the available settings.
What is X.M.P. setting the DRAM V. at? If 1.50v's, to solve your BSOD, probably would have just required raising the DRAM V. to about 1.575v's or maybe even less manually. Rather than using X.M.P., the DRAM Frequency setting could have been changed manually to 1600.
Yes, all newer final or Beta versions will have previous release improvements incorporated.
Thank you for the reply...forget to delete the "dear Svet" part as it was copied from once private message intended
To be honest, I see myself rather as a silent reader than an active poster...so I would really try to avoid posting due to English isn't my first language....if that even make sense...
I think I have read quite a lot of 0x50 BSOD (CTD errors to be exact) in other forums to...have tried what people had posted as solutions for them...and still to no avail, hence my foolish and rushed attempt in flashing the bios...please do mind that the current bios is quite stable in my opinion, despite the same BSOD (CTD) in the certain game I have mentioned in my first post...
I have followed OC guide and benchmark in other forum which show each of its poster their OC settings and result (specifically i5 2500k series), and I have tried around 1 week to safely say that my unfortunate chip can only handly a stable 24/7 4.2GHz in that volt...i'm so lucky
and for XMP volt, I have no idea to be honest, I just enable it in the bios, will really look at it later on...
tl'dr thank you so much for the new insight of how to solve the 0x50! really appreciate it....If i can remember correctly, I have tried to use the default DRAM setting (without using XMP enabled) and still got the 0x50 CTD....but trying your suggestion is still a worth a try...will try this when I get home...thank you!

Photoshop CS6 upgrade - installation question

So, 2 months ago I got a new notebook. I installed CS4 and made sure I got everything working perfectly. Then, this month I installed the CS6 trial and boy it has a crapload of permission-related temp file directory blunders. To narrow it down to just CS6, I uninstalled and reinstalled all Adobe related software on my machine except for CS4. After 10-12 hours of configuration trial and error with the temp-file blunder, I have CS6 working perfectly as well. So now I have a trial version of CS6 with a leftover CS4 key on the computer.
Now for my question: Will the trial accept a CS6 upgrade key or will I have to reinstall using the CS6 upgrade disc? I'd really prefer not to uninstall CS6 again.

Yes, you can just input your serial number in the trial version.

XI3.0 simple upgrade - Few questions

Hi Gurus,
I ran into some issues with my upgrade to XI3.0 from XIR2 SP4. I was using a simple upgrade method.
1- It seemed like the upgrade was going fine throughout. I stopped all the services before upgrade (including Tomcat). When prompted for tomcat5.5 ports, I used the default values though the XIR2 tomcat uses those ports. I thought it should not be a problem because XIR2 tomcat is stopped anyways. After the install, I noticed that the cmc and infoView folders in tomcat55/work/catlina/localhost were missing. Needless to say that CMC and InfoView did not work.
2- I thought I'll uninstall and use different ports, but the uninstall did not work. i tried both through the media and through Add/Remove programs. The media uninstall gave a 'Fatal Error' in the end and the Add/Remove program errored immediately saying 'Error applying Transforms......'
Questions:
1- I'd like someone to first please confirm that what I noticed after the install was because I used the same port numbers.
2- How can I make the uninstall to work?
3- Since the upgrade process migrated the repository, can I uninstall XIR3 and 3.0, perform a new 3.0 installtion that uses the (migrated) repository?
Thanks,
Kashif

Hi,
Addition to the above
go for 7.11 (i.e ehp1 of 7.1) ..as it have other features to use..
especially proxy feature in AAE (using XI protocol in SOAP) and also Idoc packaging which will be veryful ..
for compatible side 7.1 onwards we have pattern in service interface(message interface) with XI 3.0 stateless..
Gud luck
Rajesh

Upgrade path question...

I've been using golive 6 and in about a month I'm planning to upgrade...I'm seeing upgrades to golive 9 (which i read here has its problems), CS2 which I'm assuming I can update golive 6 to, and then the alternative that the Adobe site offers/suggests, switch to Dreamweaver...
I haven't followed all the changes and rumor...maybe you can help me here...is golive a dead end now? Is Adobe going to eventually just abandon it for DW?...
Also, I'll be updating my other adobe software to CS3 for photoshop, illustrator, and indesign...so nice integration between Golive CS2 or DW would be a goal...
Please don't shoot me if this isn't the place to ask, it just seems you guys know everything when I come with a question about me being lost and confused in golive...
oh, I did watch the little video presentation about DW on the Adobe site...i didn't feel totally lost looking at the examples there...I do wonder if DW will just be so new that'll i'll be totally lost for while...I've read of some complaints from golive users in the past...
I mean, can you tell me if DW has any 'major' shortcoming?...I'm not familiar with it...just know about golive 5 and 6 which wasn't too complicated and allowed me to do a website 'almost' pain free...
thanks for any advice/experience/tips you can pass along...I mean I could spend near $200 for the CS2 update or for $400 just buy DW...just don't want to waste money on an update if it doesn't make sense/cents...
thanks...
M

ok, so i just found this in the golive to dw transition forum...i think this starts to explain what i need to know...
http://www.adobeforums.com/webx/.3bc63381/3

10.1.0.4 upgrade documentation question

Similar Messages

Maybe you are looking for