10.4.6 logs into Console only

Hi,
I've jsut done a clean install of Server 10.4 then updated to 10.4.6 now when I log in I get taken straight to Console mode, no GUI - how can I stop this??
help!

Read the screen.
Usually when this happens there's some kind of problem with the server. The messages on screen should give you some kind of indication as to the problem, and maybe even some resolution.

Similar Messages

Cannot Log into Console DS 5.1

DS 5.1
OS Sun 9
I cannot log into the admin console. I have tried to change the encrypted password in the dse.ldif file and when I save the file with a blank one, I cannot login due to the "OK" button is greyed out. Can anyone suggest anything?
Thanks
Mike

Hi
This happens because you have manually modified the password in the configuration file, where you should not have done.
The only solution is to revert back to the old dse.ldif file and perform a ldapmodify command for changing the password.
If you still dont get the password fixed, you need to reinstall your Directory Server.
Thanks
Swaraj

Logging into console

My company is currently using Adobe Document Server. We are looking to upgrade to LiveCyle ES. The biggest issue we have with Document Server is that when installed on a server, a user has to remain logged into the console or the product does not work. Has this been fixed with LiveCycle?

Yes.
Please also note that unlike Adobe Document Server, LiveCycle requires a J2EE appserver such as IBM WebSphere, Red Hat JBoss or Oracle WebLogic.

Unable to log into console

I've a DPM2012 R2 installation that's running perfectly. However, when I try to delegate access, the users trying to access the console gets error ID:948 - DPM services aren't running. They clearly are! My user account can log in and launch the console,
so I'm guessing it's a permissions thing.
Had a quick look at the DPMAccessManagerCurr log - Can see an entry for
UtilityService.cs(56) NORMAL
IsUserDPMAdmin :: User: Domain\User admin check: True
Have tried adding user to local admin on the DPM server, Domain admin, nothing seems to work.
Any pointers?

Hi,
I would suggest taking a look at the DPMUI log for potential information on the failure.
>>Note you will have to enable hidden Files/folders if set to hidden on Server in order to navigate to the path noted below.
>>From the DPM server navigate to
Control Panel--> Appearance-->Folder Options-->Show hidden files and folders ensure that for hidden files and folders "show hidden files, folders, and drivers radio button is
selected.
>>From DPM server reproduce the issue.
>>Navigate to the below path for DPMUI0Curr.ERRLOG
C:\Users\<account you were logged in when you reproduced the issue>\AppData\Roaming\Microsoft\Microsoft System Center 2012 R2 Data Protection Manager\
>>From the DPMUI0Curr.ERRLOG review for any failures that align with date/time stamp from the last time issue was reproduced.
Additionally thoughts:
>>If you happen to identify within the DPMUI0Curr.ERRLOG the below snip. I recommend you review the server roles with in SQL Management Studio for the user outlined in the below error. The user in
question should have public and sysadmin as noted below Figure 1.
>> As it was outlined in the thread already that the user in question has permission to SQL via the domain admins within your environment I would still recommend testing by adding the user Login
in question explicitly via SQL with the below noted server roles granted.
**Snip**
WARNING
No retry on exception System.Data.SqlClient.SqlException (0x80131904): Login failed for user 'Domain\User’
Figure 1:
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question.
This can be
beneficial to other community members reading the thread. Regards, Dwayne Jackson II. [MSFT] This posting is provided "AS IS" with no
warranties, and confers no rights."

WRVS4400N problem logging into the routers administrative console with vista OS

I have a problem that is OS specific on the Linksys WRVS4400N Gigabit router. When I try to login to my routers admin page using VISTA IE7 I am prompted by the NT dialog at which point I type the correct admin UID and PWD. I am then prompted over and over again until it either gives me an access denied or I am successfully logged in; furthermore if I do log in successfully I am prompted to login again whenever I click another tab in the admin console and the same thing of repetitive login attempts occurs. I have tried turning off UAC, changing intranet security levels to low to no avail. I have the latest firmware update of 1.00.16. Any help is greatly appreciated also anyone else experiencing the same issue?
Message Edited by JKru on 09-26-2007 05:16 PM

Hi first time poster and forum user although I have owned and used PC's since 1988 and have always managed to get things configured correctly until NOW
I too am trying to log into the admin console of a WRVS4400N and have tried both browsers (IE9 and Google Chrome) that are installed on a laptop running Win7 which in turn is the only thing connected to the stated device via ethernet port 1... when using the suggested https://192.168.1.1 (which I know is the correct IP address because 'ipconfig' reveals that it is the default gateway and that it has assigned an IP address of 192.168.1.100 to my laptop).
I hope I have convinced you all that I am not a complete dummy... but this thing just refuses to let me in... gives me the login dialogue box in either http:// or https:// format and just let's me enter admin and admin any number of times and does little else - though occasionally it has gone to the 401 error screen - I cannot be sure of why - it is possible that I did mis-type something in my frustration
Has anyone got a clue?
Many thanks,
Rob

Everytime i log into facebook i get an Alert message "This build is only enabled for employees"??

Is anyone else getting this message when logging into facebook? This build is for employees only?

Delete the app from your iPhone. Hold down the app until it jiggles then tap the circle with an x it it then tap Delete.
Restart your iPhone.
Press and hold the On/Off Sleep/Wake button until the red slider appears. Slide your finger across the slider to turn off iPhone. To turn iPhone back on, press and hold the On/Off Sleep/Wake button until the Apple logo appears.
Then tap the App Store icon and re download the FB app.

Jabber for windows only allows the logged-in AD user to log into his jabber account only

Hello gang,
I have this strange issue with jabber for windows 10.5. So if you log into a pc with your microsoft active directory domain account and try to log into jabber with the same user credentials, you can log-in fine. However, if you try to log into another jabber account that is different from the AD account that you are logged into the pc with, you will not be able to log into jabber. You will just get an error from jabber that says that your credentials are incorrect. I actually deleted the jabber folders in the local and roming data folders, thinking that maybe it was caching the password but even that did not help.
Has anyone seen this problem before?

I've also experienced this. If you are logged in as a local user on the computer you can switch to any other Jabber user, but if you are logged into your computer with a domain/AD account you cannot login as a different user, only the domain user that is signed into the computer can login to Jabber. Does anybody know of a workaround or fix? Is this a setting that can be changed?

HT4314 I have two iPad with one game centre account as the second iPad is my sons machine. I created a second game centre account but am not able to log into it as game centre only seems to let me put in an appleID, can someone suggest how I can get his s

I have two iPads, one is my son's machine. Previously he had an IPad 1 and mine was an ipad2. The iPad 1 died so I bought myself a new ipad4. I have only one appleID for both machines but created two Game centre accounts as there is a couple of games we both play and have different high scores. ipad 4 is nicely set up with all of my game data but now I would like some help in reinstating My sons game centre account (previously on the ipad1) now on the iPad 2. When I try to log into game centre it only lets me out in my appleID which gives up my game center account. Thankyou.

You and your husband can share a store account and still have seperate iCloud accounts for your contacts, bookmarks and stuff like that. Click here for instructions to make an apple account without entering a credit card. Make sure you use a different email address for each apple account.
Set up your iPhone/iPad whatever using the new account for iCloud. Then go into settings/store and sign in with your purchasing account, you may need to sign out of the other account. To the best of my knowledge, your household is allowed to share purchased legally, someone please correct me if I'm wrong.
Once you each have your own devices set to your own accounts you can set them to backup to that account and it will keep all your contacts seperate.

I am trying to retrieve music that I had from an iPad to my iTunes account. I'm using the same computer for synching my iPhone. I'm logged into my iPad account, but can't retrieve music. It only recognizes my iPhone.

I am trying to retrieve music that I had from an iPad to my iTunes account. I'm using the same computer for synching my iPhone. I'm logged into my iPad account, but can't retrieve music. It only recognizes my iPhone. Does anyone know how I can get my music? I know longer own the iPad so I don't have access to it, but I don't think that should be a problem.

So you had music on the iPad that is not in iTunes and you no longer have the iPad. Is that what you are saying? If that is what you are saying, iTunes won't "recognize" anything that was on the iPad, that was not purchased from iTunes. If the music was purchased from iTunes, you should probably be able to download it again for free as long as you are using the same Apple ID that you bought it with. Did you try downloading the music again?
Am I understanding what it is that you want to do? If I am understanding you correctly, you will find this to be useful.
Downloading past purchases from the App Store ... - Support - Apple
I admit that I'm a little confused by your remark about being logged into your iPad account. You should be logged into your iTunes account.

Exchange 2013 - Admins can only log into one ECP server

Simple run down of my environment:
• Two AD sites (Site1 and Site2)
• One 2008 R2 domain controller at each site (DC1 w/ FSMOs and DC2) running AD forest function level 2008 R2
• One 2012 Std server with Exchange 2012 Std CU3 at each site (EX1 and EX2) – CAS/MBX on both, No DAG
• Half of mailboxes on each server
Using https://webmail.domain.com for all of our internal and external virtual directories. Adding /OWA or /ECP will get you into the respective site from either internal or external.
All Domain Admin/Exchange Admin (Organization Management) do NOT have mailboxes. Those individuals can log into ECP from https://webmail.domain.com/ecp, or FQDN or IP of EX2 only. If John Smith has no mailbox then he must use:
https://webmail.domain.com/ecp
or
https://ex2.domain.com/ecp
or
https://10.16.109.31/ecp
If EX2 goes offline or they use https://ex1.domain.com/ecp or https://10.16.108.31/ecp then none of the admins can login and they get the following:
Use the following link to open this mailbox with the best performance:
https://webmail.domain.com/owa/auth.owa
X-FEServer: EX2
Date: 2/18/2014 10:37:42 PM
s ECP or the https://webamil.domain.com/ecps ECP.
They can access EMS from either server and run Get-ECPVirtualDirectory and it shows what we would expect:
– https://webmail.domain.com/ecp
– https://webmail.domain.com/ecp
Why can an admin with no mailbox only log into the ECP on EX2? What is forcing the login to EX2 only? How can I move that “forced login” to EX1 if we ever get into a situation where EX2 is having problems? What happened in Active Directory or Exchange that
made EX2 the primary login server for ECP and OWA? My FSMOs are located at Site 1…the same location where EX1 is located. The same server that I cannot log into ECP directly.
~Rick

Any admin that is mail enabled can then only log into the server that hosts his mailbox. Admins without mailboxes can only log into EX2. And again, all admins can log into https://webmail.domain.com/ecp unless one of the servers goes offline
and that's when the problems occur. Nothing obvious or unusual regarding mail flow. Done various internal and external tests and have not seen anything obvious or in the logs.
Yesterday's change that MS Support had me do was to delete the ExternalURL for the ECP virtual directories. No difference. So, my latest update from MS Support that requested me to try today's change...
set-owavirtualdirectory “owa (default web site)” -RedirectToOptimalOWAServer $false
After performing an IIS reset and making sure replication had completed there was no difference. So, I am now forced to wait till Monday for MS to respond if the pattern stays at one email per day.
Has anyone with multiple servers at different AD sites been able to log directly into the either server like I'm trying? I get this problem in my labs and I even had MS, while on the phone, remote in to make sure I was setting it up properly.
The guy on the phone never said if their labs do the same thing cause they don't have multiple AD sites in their labs. In my lab if I have two servers at each site then I can log into both servers at the site, but not the other site. It appears it becomes
site dependent then.
MS has taken numerous logs and they are acting like this is the first time they've seen this. Yet I can reproduce it with no problem time after time. I'll create new VMs and start all over from scratch and make this happen every time I create a new AD/Exchange
environment (it does take me a while to build all those VMs from scratch). No fancy GPOs to AD and no radical changes to the Exchange servers. Other than obvious config changes to make sure email can flow internally and externally, this is pretty much out
of the box.
~Rick

I have deleted my photos but have icloud. when i log into icloud it doesnt give me an option to view these photos at all. my photo stream is only showing photos from another iphone in the house. i am unsure if i do a restore from back up if this will work

I have deleted my photos but have icloud. when i log into icloud it doesnt give me an option to view these photos at all. my photo stream is only showing photos from another iphone in the house. i am unsure if i do a restore from back up if this will work. i really dont want to lose these photos but i am very unsure of what to do to resolve. can anyone please help?
thank you

If you had Photo Stream enabled with your iCloud account settings on the iPhone, photos in the Camera Roll should have been transferred to your photo steam automatically when the iPhone was connected to an available wi-fi network.
Your photo stream is not available when logging in with your iCloud account with a browser on a computer.
Why were the photos in the Camera Roll deleted?
Photos/videos in the camera roll are included with your iPhones backup. If your iPhone's backup has not been updated since the photos were deleted from the camera roll, you can try restoring your iPhone from the backup.

I have qualitynet either wired internet. I buy a card good for a month at a time, I can only log into one device at any one time. Are there settings I can adjust on my airport express to allow all my devices to connect to wi-fi without having to log out.

I have qualitynet either wired internet. I buy a card good for a month at a time, I can only log into one device at any one time. Are there settings I can adjust on my airport express to allow all my devices to connect to wi-fi without having to log out of one devise before using another?

Some Internet providers that limit access to a single device at a time do so by the device's hardware MAC address. If your ISP is one of those, you may be able to substitute the MAC address of your AirPort Express base station for the computer. I would suggest that you contact them to find out if this is allowable.

Can't log into Sun DS 5.2 Console after installing Identity Synchronization

Installing the Identity Synchronization module over the directory server prevents me from logging into the server using the console.
I installed Sun Java System Directory Server 5.2 on a Windows 2000 server. After that, I installed the following in the order below:
1. Patch 5077789 Patch 2
2. Patch 117667-03
3. Sun Java System Message Queue 3.5 SP1.
Upto this point, I was able to log into the DS server without any problems. I was also able to access and use the MQ.
After this, I installed the Sun Java System Identity Synchronization module.
Now I am unable to log into the DS console. The error I get is "Cannot logon because of an incorrect User ID, Incorrect password or Directory problem.
java.net.SocketException: Connection reset"
Any ideas what the problem might be? I've tried uninstalling, cleaning up and reinstalling everything, but to no avail.
Thanks in advance

Look at the logs/error under admin-serv directory for more clue
Make sure hostname.ldapdomainname (eg: ldap1.example.com) for LDAP server is set in Windows hosts file as 1st field.
cd to slapd-hostname and run
.\saveconfig
Notepad the ldif file generated, search for userPassword for cn=admin-serv-hostname, AND CHECK IF there is passwordExpirationTime set, if there it could mean userPassword of admin-serv-hostname expired, if so you may follow a recent thread to set it to never expire.
http://swforum.sun.com/jive/thread.jspa?threadID=48144&tstart=0
Gary

I paid for exportpdf and everytime i try to use tool on pdf, it asks me to subscribe. i have to log into website EVERY time. not acceptable. how can i export only form fields that were filled in?

i paid for exportpdf and every time i try to use tool on pdf, it asks me to subscribe. i have to log into website EVERY time. not acceptable. Some forms can't be saved so having to log in and only use webtool to upload a saved pdf won't work.
as well, how can i export only form fields that were filled in if I can get pdf to save to computer?

Hi kstine,
I can see why that would be frustrating! Have you tried selecting Stayed Signed In underneath the Adobe ID and Password boxes when you try to log in?
What did you use to create the PDF form? If you used FormsCentral, form data is saved to your online FormsCentral account. If you have Acrobat, you can export form data as described here: Adobe Acrobat X Pro * Manage form data files
Best,
Sara

My password only works to log into the computer, but not to make admin changes, even though I am the admin account on the computer. This happened after I tried to change the computer's name. Is there any way to fix this?

Bought my laptop off my room mate and he had master reset it to default. This still left his name as the computer name and I wanted to change that. Tried to rename it under the advanced changes section, and now it isn't recognizing my password for anything more than logging in. I can't unlock the settings to make further changes (or change it back). I have had my room mate try all of his old passwords and usernames, to no avail. Is there a way to reset this? It's also not letting me wipe the drive and start fresh again because, alas, I don't have access without the password. Any advice would be very helpful. Thank you!

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.

10.4.6 logs into Console only

Similar Messages

Maybe you are looking for