Sh conn (Cause of failures)

Hello
Instruction:
CONN WEB server farm online sh
Failure occurs on a particular server. The cause of the failure?
sh serverfarm WEB
serverfarm     : WEB, type: HOST
total rservers : 3
                                                ----------connections-----------
       real                  weight state        current    total      failures
   ---+---------------------+------+------------+----------+----------+---------
   rserver: WEB1
       172.32.20.11:80       8      OUTOFSERVICE 22         0          0
   rserver: WEB2
       172.32.20.14:80       8      OPERATIONAL 37         859        0
   rserver: WEB3
     172.32.20.17:80       8      OPERATIONAL 60         1168       21
There is no result to failure of the probe.
Software
loader:    Version 12.2[120]
system:    Version A2(3.2a) [build 3.0(0)A2(3.2a)]
Thank you.

Thank you for answer.
Has now continued failure occurs. Is there to be resolved method to SYN timeout occurrence at the time?
The ace is the problem? The problem is the server?
inside_l4# sh probe 80 detail
probe       : 80
type        : TCP
state       : ACTIVE
description :
   port      : 80      address     : 0.0.0.0         addr type : -
   interval : 2       pass intvl : 2               pass count : 5
   fail count: 2       recv timeout: 2
   conn termination : FORCED
   expect offset    : 0         , open timeout     : 10
   expect regex     : -
   send data        : -
                       --------------------- probe results --------------------
   probe association   probed-address probes     failed     passed     health
   ------------------- ---------------+----------+----------+----------+-------
   serverfarm : WEB
     real      : WEB1[80]
                       172.32.20.11    0          0          0          DISABLED
   Socket state        :
   No. Passed states   : 0         No. Failed states : 0
   No. Probes skipped : 0         Last status code : 0
   No. Out of Sockets : 0         No. Internal error: 0
   Last disconnect err : -
   Last probe time     : Never
   Last fail time      : Never
   Last active time    : Never
     real      : WEB2[80]
                       172.32.20.14    46499      0          46499      SUCCESS
   Socket state        : CLOSED
   No. Passed states   : 1         No. Failed states : 0
   No. Probes skipped : 0         Last status code : 0
   No. Out of Sockets : 0         No. Internal error: 0
   Last disconnect err : -
   Last probe time     : Tue May 21 18:42:58 2013
   Last fail time      : Never
   Last active time    : Mon May 20 16:46:57 2013
     real      : WEB3[80]
                       172.32.20.17    45704      0          45704      SUCCESS
   Socket state        : CLOSED
   No. Passed states   : 1         No. Failed states : 0
   No. Probes skipped : 0         Last status code : 0
   No. Out of Sockets : 0         No. Internal error: 0
   Last disconnect err : -
   Last probe time     : Tue May 21 18:42:57 2013
   Last fail time      : Never
   Last active time    : Mon May 20 17:13:32 2013
   serverfarm : WEB_EDI
     real      : WEB4[80]
                       172.32.20.21    972749     3          972746     SUCCESS
   Socket state        : CLOSED
   No. Passed states   : 1         No. Failed states : 0
   No. Probes skipped : 1         Last status code : 0
   No. Out of Sockets : 0         No. Internal error: 0
   Last disconnect err : -
   Last probe time     : Tue May 21 18:42:58 2013
   Last fail time      : Never
   Last active time    : Mon Apr 29 04:17:06 2013
     real      : WEB5[80]
                       172.32.20.24    972746     2          972744     SUCCESS
   Socket state        : CLOSED
   No. Passed states   : 1         No. Failed states : 0
   No. Probes skipped : 4         Last status code : 0
   No. Out of Sockets : 0         No. Internal error: 0
   Last disconnect err : -
   Last probe time     : Tue May 21 18:42:58 2013
   Last fail time      : Never
   Last active time    : Mon Apr 29 04:17:06 2013
============================================================
inside_l4# sh serverfarm WEB
serverfarm     : WEB, type: HOST
total rservers : 3
                                                ----------connections-----------
       real                  weight state        current    total      failures
   ---+---------------------+------+------------+----------+----------+---------
   rserver: WEB1
       172.32.20.11:80       8      OUTOFSERVICE 0          0          0
   rserver: WEB2
       172.32.20.14:80       8      OPERATIONAL 28         55085      622
   rserver: WEB3
       172.32.20.17:80       8      OPERATIONAL 5          44150      414
MINISTOP/inside_l4#

Similar Messages

RMMR1MRS-When run in background cause update failure errors looking

hi,
RMMR1MRS report when run in background cause update failure errors .
There are few below reason for the error log.
1. for the PO invoice already generated - (its right if already invoice generated. should not happen again)
2. In MIGO, entire quantity has been reversed and also invoice generated with zero value - ( its right , should not happen invoice again )
3. Particular PO line item deleted - (its right if the PO line item deleted. ERS settlement not require)
For the all above reason, the update error occurs. But the mean time the program "RMMR1MRS" should not through the update error log.
Note: The job was not terminated due to this update error and also no harm because of the error log
can you please help on this update failure why it occurs.

Have you found a solution already? If so, please, share it with the community and close this thread.

Step failure causes sequence failure Option

Hi !
I need some clarification about the Step failure causes sequence failure Option , I'm using TS 4.2 Under Win XP .
Lets say i have a Seq with 4 steps in all of then Step failure causes sequence failure Option is Checked .
Record Result in all of the3 steps is Checked , If the first step will fail will it perform the next steps ? and will it record the result for this steps ?
Thank U .
Kobi Kalif
Software Engineer

Record Result in all of the3 steps is Checked , If the first step will fail will it perform the next steps ? YES
and will it record the result for this steps ? YES
What this is signifying, is if a Step fails then when the Sequence has completed and returned back to the caller the status of this step will be FAILED.
If you need to jump to Cleanup then you will need to set the Post Action.
regards
Ray Farmer
Regards
Ray Farmer

Hostid change on reboot causes zpool failure to load

Seems every time I restart my Solaris 11 Express PVM the hostid is regenerated thus causing a failure for zfs to load pool 'tank'
zfs: [ID 427000 kern.warning] WARNING: pool 'tank' could not be loaded as it was last accessed by another system (host: solaris hostid: 0x45edf6). See: http://www.sun.com/msg/ZFS-8000-EY
(note: unable to locate msg/ZFS-8000-EY on oracle.com)
'zpool import -f pool' works, but I don't want to hack the service manifests to make this automatically import on reboot.
dom0
Oracle VM server release 2.2.1
Linux <hostname> 2.6.18-128.2.1.4.25.el5xen #1 SMP Tue Mar 23 12:43:27 EDT 2010 i686 i686 i386 GNU/Linux
domU
SunOS solaris 5.11 snv_151a i86pc i386 i86xpv Solaris

Seems like modifying vm config using Oracle Virtual Manager GUI insists on inserting the following line in vm.cfg (as well as deleting my 'phy:' lines):
vif_other_config = []
Problem of 'hostid changing on reboot' persists even after manually removing the above line and using the running vm.cfg is as follows:
cpu_weight = 512
disk = ['file:/var/ovs/mount/A1E890DD6BE34CFF9CB69BCA47ACB4D3/running_pool/sx11/System.img,xvda,w',
'phy:/dev/c7t1,xvdb,w',
'phy:/dev/c7t2,xvdc,w',
'phy:/dev/c7t3,xvdd,w',
'phy:/dev/c7t4,xvde,w',
'phy:/dev/c7t5,xvdf,w',
'phy:/dev/c7t6,xvdg,w',
'phy:/dev/c7t7,xvdh,w',
extra = '/platform/i86xpv/kernel/amd64/unix -B zfs-bootfs=rpool/ROOT/solaris,bootpath=/xpvd/xdf@51712:a'
kernel = '/var/ovs/mount/A1E890DD6BE34CFF9CB69BCA47ACB4D3/iso_pool/be/sol-11-exp-201011-text-x86/unix'
memory = 4096
name = 'sx11'
ramdisk = '/var/ovs/mount/A1E890DD6BE34CFF9CB69BCA47ACB4D3/iso_pool/be/sol-11-exp-201011-text-x86/boot_archive'
uuid = 'd56c89ef-ef4b-40e8-8d68-2a64c86d5f12'
vcpus = 6
vfb = ['type=vnc,vncunused=1,vnclisten=0.0.0.0,vncpasswd=oracle']
vif = ['bridge=xenbr0,mac=00:16:3E:7A:7F:BF,type=netfront',
'bridge=xenbr1,mac=00:16:3E:4E:2D:1A,type=netfront',
]

Activate or skip "Record Results" and "Step Failure Cause Sequence Failure" for all steps of a step type

Hello all,
I am using teststand 3.1
Is it possible to skip or activate ´"Record Results" and "Step Failure Cause Sequence Failure" for all steps of a step type.
It is very much work to do this for all steps, because I have hundred of steps
regards
samuel

hi,
here is an example that will change the TS.NoResult. You just have to change this area of the sequence to suit your needs
I haven't added any fancy stuff, such as adding a filedialog to get the seq file to change, you will find the various variables in the Locals.
Hope it helps
There is a version for 3.1 and 3.5.
Regards
Ray Farmer
Regards
Ray Farmer
Attachments:
ChangeStepTypeRunMode.zip ‏30 KB

3rd Part Menory Causes Fan Failure

Bought my MBP about 9 months ago and shortly thereafter installed a 1G Ram Module from OWC. 2 Weeks ago my Right hand side fan statred making an awfull racket and then dies. Contacted Apple who had me send it to them. Received my computer last nite. Now remember the only thing wrong with this MBP was the fan. The Hardware Test (Short/Long) run from Disk 1 showed only a Fan Problem. No Memory, Mother Board, Etc. I received the computer back with the Main Logic Board Replaced, Disk Drive Slicked, Memory in a plastic Bag. And the MBP is unusable as received from Apple. Screen goes black, locks up, etc. Tried Reinstalling OSX and it would not complete. I sent about 5 hours on the phone with Apple Tech Support on receiving my MBP back in worse condition than it was sent in for. After going around and around with Apple I got a good tech who said it was a definit hardware issue (Others wanted to first buy Apple-Care for 359 or a 49 version) but since its still falls within one year and also 90 day warrenty if Apple Screwed it up I refused. Finally it will be sent back in to "HOPEFULLY" be fixed this time! Anyways, enogh venting and back to the original question; "Will A Ram Module Cause A Failure To A Fan?" Just one fan by the way the left one worked but upon return they said they replaced both. Thanks for allowing me to vent!! Hopefully this is a fluke on Apple Support since I really miss my Laptop right now!!
Bill......
MBP Mac OS X (10.4.8)

Thanks for the response. Yes I am or was using SMC Fan Control along with iStat in the Dash for moniotring. I work with a lot of PC's and have built my own from MB and Up. Since I am fairly new to Mac but in all my years I have never heard of Memory causing a failure of a Fan. I could as you said believe Kernel Panics or Programs screwing up or reboots for that matter. My assumption is that they did not like the OWC Memory or the addition of Non-Apple Memory. I also find it hard to believe my Main Logic Board all of a sudden (In the Apple Techs Hands) went bad. I can understand maybe the drive being slicked and fans switched in-pairs. But the rest I find really off the wall. I just hope that they can correct the problems right this time since I have been hyping my MBP since I got it and now this is a real show-stopper for me!
Bill......

Clicking on hyperlink in Outlook causes "General Failure" Error message to pop up in Outlook - but we page does open in Firefox 4.0

Since upgrading to Firefox 4.0 - every time I click on a link in Outlook, it causes a "General Failure" error message that says, "The URL was:" ... "The system cannot find the fix specified."
However the site opens fine in Firefox.

I have same problem and found article below that worked but then i ended up having to do system restore because outlook stopped sending emails after i synced new iPhone while at Apple store that caused problem!!!
http://answers.yahoo.com/question/index?qid=20080512192747AAHDZtL

Inclusion of cxxabi.h and iostream causes compile failure

stephen@hal:/tmp$ cat test.cpp
#include <iostream>
#include <cxxabi.h>
int main()
return 0;
stephen@hal:/tmp$ /home/stephen/solaris-studio/SolarisStudio12.4-linux-x86-bin/solarisstudio12.4/bin/CC -std=c++03 -Wp,-I/usr/include/x86_64-linux-gnu/ -c test.cpp
"/home/stephen/solaris-studio/SolarisStudio12.4-linux-x86-bin/solarisstudio12.4/lib/compilers/CC-gcc/include/c++/4.8.2/cxxabi.h", line 131: Error: Only one of a set of overloaded functions can be extern "C".
1 Error(s) detected.
This happens on at least ubuntu and fedora.

> - don't include <cxxabi.h>, or
Actually the problematic behavior is more complicated than just a conflict betwen external cxxabi.h and internal definition.
There is no failure if you "just include" cxxabi.h.
Our internal definition agrees with what is defined in cxxabi.h
And compiler does emit error message if you include cxxabi.h after iostream.
Something fishy happens between exactly these two headers, causing cxxabi.h to define atexit differently.
It does not happen with other STL headers.
Say, including <string> and then cxxabi.h works ok.
> I needed another work around for including fcntl.h and string
I'm not sure how you came from "fcntl.h and string" to "cxxabi.h and iostream".
You also mention "stlport" in your cmake commit and I assume stlport is -library=stlport4.
Which means it has nothing to do with -std=c++03/-std=c++11/-compat=g modes that use G++ STL headers.
If you want to make your change only for sunCC -library=stlport4 then you can try hacking around with some additional #ifdefs
but I would really like to know why that rather innocent fcntl.h causes the problem.
regards,
Fedor.

Firefox causing Windows failure with bluescreens

Since installing firefox version supplied thru a yahoo download Windows xp fails with bluescreens. I perfer using firefox over IE but can not continue with the windows failures. I'll have to go back to IE.

Phillipp,
Originally, I thought this was a windows problem. I went to http://answers.microsoft.com/en-us, logged in and searched on 'unauthorised version of windows".
You asked for a thread. There isn't one in particular, just a '''pattern''' in the many responses to that search term that are there. You'll need to read more than just a few of the entries to see it.
The search turned up lots of user entries with statements like "I've used a fully activated windows for years and suddenly it's telling me the windows version is unauthorised. why?" A common question by MS in reply is what did you last install or upgrade before the event, and many of the users replied Firefox. . . . The MS suggestions seemed to usually involve safe mode and uninstall actions.
I haven't done any of that - no need to yet - the unauthorised version message hasn't re-appeared, but once bitten several times shy. I know several users who have not had the problem also, so it looks to be very irregular, however the list of users with the unauthorised version problem citing firefox are not isolated cases either. My reaction on reading those posts would have been - if I did not already use FF - don't go near it. Software relies on reputation and those who have a bad experience with a program often do not advise the programmers of that - just steer clear and tell others to do the same. So I am telling you about it . . . .
The reality of FF being implicated in some way in these unauthorised version messages is clear in the entries on the MS website. It's possible that Mozilla has never seen them or heard of the issue, but that doesn't make the problem non-existent. The point of my message is that Mozilla needs to get its act together in this space, identify what can cause that message (talk to MS??) and ensure that it does not happen during new version testing.
You guys have a better link to the developers than any other I have seen. Pass this along.
Davidk03

Firewire external drive causes internet failure on iMac 2.8 GHz

I am connected to the internet via wireless connection, which shows a strong signal. When I connect my external Lacie HD, I receive a failure notice when when I open any browser. Signal strength is still strong, but the network, internet and logon fails. I have reset and purged the caches, etc, but no luck. Creating a new connection does not help either. The one sure fix: eject the HD, disconnect it, and open the browser again. Bingo; I'm on. What gives? Anyone have an idea why or what would cause this? It took a while to make the association, but the drive is the culprit undoubtedly.

Hi elkaboom-
Greetings and welcome to the Apple boards.
If the drive has an external power supply brick those have been known to go bad. it is hard to diagnose because the blue light comes on and the drive sounds like it is working.
When the supply goes bad it causes all kinds f problems. This is the first time I have heard of this symptom though I still believe this may be your culprit.
If the drive is under warranty LaCie will replace the supply at no charge. If it is out of warranty you can purchase a supply directly from them for around $20.
Luck-
-DaddyPaycheck

IDVD encoding causes system failure during burn process

I have iDVD 5 on my work computer (dual 2.7Ghz G5 / 2.5 G RAM), and have burned successfully before my current project.
My current project has a 28:45 movie and I have tried two different themes with different combinations of drop zones (one with the movie as the drop zone and one with stills only) and everything previews okay, but when I start the burn process it will get to a certain point in the encoding and then the whole system crashes. I come back to check on the process, and my screen is filled with black squares with error info in it... (looks like a DOS screen or something) and it says something about system failure and that I need to restart my computer.
I'm so stubborn that I keep trying different combinations of possibilities but I'm having no luck. The movie that it's hangin up on was captured in Final Cut Pro from a VHS, edited in Final Cut to trim the excess black, and exported as a Final Cut Movie that I imported into iDVD.
As I said above, I have burned successfully on this computer and this iDVD, so the fact that this one project refuses to burn is perplexing.
any thoughts?

A gap in video would be a space between one clip and another. This is a problem when you are editing your footage, not capturing it. In other words, it is a user introduced problem.
In FCP when you say "Ignore Timecode Breaks" it just means to continue capturing video even if there is a timecode break. If you do not select this option, FCP would immediately stop catpturing whenever it hit a timecode break. A timecode break is not the same thing as a gap you create during editing. A timecode break could be as simple as rewinding your camera footage and then recording over it... the timecode now has a break because it is not continuous timecode, it jumps from one timecode to another.
Depending on what device you are capturing from, your audio may come in a few frames before or after the video. This would be especially true for a non-controllable device. It is a simple fix to adjust this as you would have noticed any sync issues right in the timeline during playback.
A system reboot in the middle of encoding is a serious crash... I doubt if it is the footage per se that is causing this to happen. Footage has been known to force an application to abort a process (or stay in an infinite loop), but an actual system shutdown would be extremely rare.
Consider recapturing the footage into a new FCP project and then creating a new iDVD project for it, this will eliminate either a corrupted FCP file or an iDVD project from the equation. Also, are you burning directly to disc or are you preparing a disc image? I'd go with the disc image approach because you can test your final build that way.

Lenovo update causes startup failures

I just used the Lenovo update and now my W520 throws several failures on boot. It also caused a BSOD. Specifically my W520 is running Windows 7 and I get popups saying "There was a problem starting C:\Program The specified module cannot be found." it also says "You cannot install an older versio of Bluetooth software over a newer versino ... [-349].
Also PC Doctor won't run and the system BSOD whn I attempt to connect an external monitor. All this after I updated using the Lenovo update.
HELP!!!!

Welcome to Lenovo Community, rcarbis. Thank you for sharing your experience. This may indeed help others.
ThinkPad: T530 / X1 Gen 2 / Helix - Yoga: Tablet 2 Pro (Win) / Yoga 3 Pro
If you find a post helpful and it answers your question, please click the "Accept As Solution" button.
Lenovo Advocate ~ I am not employed by Lenovo or Microsoft. I am a volunteer.
Microsoft MVP - Consumer Security
SpywareHammer

Live Instance in Flash Media Server 4.0 crashes/causes stream failure

Hi,
I have a Flash Media Server streaming version 4.0 server that is expierencing some issues. Currently multiple inlet encoders are publishing live video content to this FMS. At random times, the live_definst_ instance will crash and then restart itself. The encoder does not recognize this new session and as a result, no new live video is being sent unless the encoder is stopped/started. This cannot be done during live events, however.
I also have an enterprise version 4.0 that does not have this issue. Is there a fundamental difference between the streaming/enterprise versions that would cause this issue and if so, is there any modifications that can be done to the streaming server that can fix this?
Also I've noticed on the master logs that the enterprise server has various
_defaultRoot_L_defaultVHost_:::_0 expierenced 1 failure's
After this it seems like it starts. However, the streaming server has this:
_defaultRoot_L_defaultVHost_:::_0 expierenced 2 failure's
Recovering core _defaultRoot_:::: with 2 failure[s] after 300 seconds!
What exactly is this "recovering" process, could this be what is causing this issue? Can I disable this in the config?

You need to place the crossdomain.xml in the webroot folder. Create a text file in the webroot folder using notepad, and call it crossdomain.xml. The text below will give you a wide open access policy, which is fine for testing.
<?xml version="1.0"?>
<!DOCTYPE cross-domain-policy SYSTEM "http://www.macromedia.com/xml/dtds/cross-domain-policy.dtd">
<cross-domain-policy>
<allow-access-from domain="*" />
</cross-domain-policy>
For debugging HTTP streaming I recommend you get hold of something like Charles or Fiddler. These will greatly assist in pinpointing any issues.

PB waking up caused HD failure?

My HD just failed on my 10 months old PB and I think it has to do with the PB waking up while it was jiggling inside my bag. I was transferring 1.5 GB from my camera to the PB and then I closed the lid and packed it back into my bag while making sure it was sleeping. After an hour or so I tried to transfer anther 1 GB of images into it but the HD started to click and the computer freeze. Apple has already placed a new HD so I am good to go, but I am starting to wander if it waked up while it was in the bag and that is what caused the damage.
Should I turn it off? What are you doing?
PowerBook G4 12

Whilst possible that something may have happened during sleep mode, it is also possible that the drive failure was completely unrelated.
My own personal experience of sleep mode in transit, over a period of seven years and six different Apple notebook computers, has always been perfectly fine. However I always make absolutely sure I have packed everything securely. Like Graham, I always use the key commands to put them to sleep and wait for the pulsing light to confirm sleep mode operation. The notebooks always travel in their own sleevecases, which is then carried inside a backpack along with other equipment.
So far I have yet to experience a problem, and I have never shutdown beforehand. However I have suffered drive failures - but they were not attributable to the use of sleep mode.
15 1.25G/12 1G PBs, Mac minis, iBooks G3/G4, Mac OS X (10.4.3) Cube, TAMs, iPods 2G/4G, iPs, AEBS, AX

Can I use xbootmgr to measure what causes a failure to present credentials screen after ctrl-alt-del?

Hello,
I have several machines that are producing the same issue that when a user reboots, they are greeted as usual with the "please press ctrl-alt-del to logon" screen. When that key combination is hit, the info screen is gone, but the "User
logon box" never appears. By never, I mean it doesn't appear within 2-5 minutes, and the users tend to hard reboot their computers (generally leading to more problems).
I've read that this can be caused by a variety of issues, such as DNS, cable, speed negotiation with the switch port, etc. However, I am interested in learning if I can use xperfmgr to determine the issue.
From my testing, the ETL is only written once a user logs on to the system.
The invocation I used is as follows:
"C:\Program Files\Microsoft Windows Performance Toolkit\xbootmgr.exe" -trace boot -traceflags base+latency+dispatcher -stackwalk profile+cswitch+readythread -notraceflagsinfilename -postbootdelay 10 -nopopups -resultPath C:\Boot_Trace
Is it possible to use xbootmgr to measure this situation?
Thanks,
Matt

Hi,
Yes, this tool could to be used to record the boot information.
Let's make clear something below.
1. Could you see this screen after pressing "Ctrl+Alt+Delete":
2. Did you mean that the password inbox disappear?
3. Could you see above login screen when you start the computer normally？
If all is Ok when you start computer, the xbootmgr.exe - trace boot is not applied.
Meanwhile, go to Clean Boot
to see if there is some third-party software to troubleshoot.
Karen Hu
TechNet Community Support

Sh conn (Cause of failures)

Similar Messages

Maybe you are looking for