10.5.3 seemingly breaks PyMSNt 0.11.2

I had a bad upgrade experience with 10.5.3. Software Updated seemed to hang for about 20 minutes after logout at the point it was 81% through "Writing files".
I had no choice but to force restart. Upon reboot, my computer reflected 10.5.3, but I applied the combo updater just in case.
Now, I'm not sure that was related, but PyMSNt doesn't start up under 10.5.3. I get the following error:
Unable to install any good reactors (kqueue, epoll, poll).
We fell back to using select. You may have scalability problems.
This reactor will not support more than 1024 connections at a time.
Traceback (most recent call last):
File "./PyMSNt.py", line 14, in <module>
main.main()
File "/private/var/jabberd/modules/pymsnt/src/main.py", line 398, in main
app = App()
File "/private/var/jabberd/modules/pymsnt/src/main.py", line 335, in _init_
twistd.checkPID(config.pid)
AttributeError: 'module' object has no attribute 'checkPID'
Is anyone else experiencing this? Is this an incompatibility or the result of a buggered up upgrade?

I did some digging on the PyMSNt mailing list and rather than fixing this 0.11.2/checkPID problem, I figured out how to get 0.11.3 running which doesn't exhibit that problem.
Since it's not really an answer to getting 0.11.2 running, I started a new topic:
http://discussions.apple.com/thread.jspa?threadID=1542945

Similar Messages

How to remove dg broker and create 2nd physical standby?

We have a dg broker setup 2 years ago for our production DB for DG standby. But we never used it. It kept down since then. However, we still have the configuration in the database like this:
Primary:
log_archive_config string DG_CONFIG=(dxp1p, DXP1P_STD)
log_archive_dest_1 string location="/u04/dxp1p/archive", valid_for=(ONLINE_LOGFILE,ALL_ROLES)
log_archive_dest_2 string SERVICE=DXP1P_VA MAX_CONNECTIONS=3 REOPEN=60 db_unique_name=DXP1P_STD
dg_broker_config_file1 string /u01/dxp1p/data/dgconf1.dat
dg_broker_config_file2 string /oracle/product/10g/dbs/dr2dxp1p.dat
dg_broker_start boolean FALSE
1st Standby:
log_archive_config string DG_CONFIG=(dxp1p, DXP1P_STD)
log_archive_dest_1 string location="/u02/dxp1p/archive/" , valid_for=(ALL_LOGFILES,ALL_ROLES) db_unique_name=DXP1P_STD
dg_broker_config_file1 string /oracle/product/10g/dbs/dr1dxp1pdr.dat
dg_broker_config_file2 string /oracle/product/10g/dbs/dr2dxp1pdr.dat
dg_broker_start boolean FALSE
When I tried to logon to dgmgrl, got this message:
ORA-16525: the Data Guard broker is not yet available
I would like to remove the dg broker and let the current standby continuing running normal. Plus I would like to add another standby database to the primary at different location. I tried to change:
log_archive_config to 'read, receive, nodg_config'
log_archive_dest_2 to 'SERVICE=DXP1P_VA LGWR ASYNC=20480'
It seems breaking the archive send, and got the message from alter log:
=================================================
Errors in file /oracle/admin/dxp1p/bdump/dxp1p_lns1_29074.trc:
ORA-16057: DGID from server not in Data Guard configuration
LNS: Failed to archive log 4 thread 1 sequence 168101 (16057)
Mon Jul 30 17:47:27 2012
Errors in file /oracle/admin/dxp1p/bdump/dxp1p_arc0_5962.trc:
ORA-16057: DGID from server not in Data Guard configuration
Mon Jul 30 17:47:27 2012
FAL[server, ARC0]: Error 16057 creating remote archivelog file 'DXP1P_VA'
FAL[server, ARC0]: FAL archive failed, see trace file.
Mon Jul 30 17:47:27 2012
Errors in file /oracle/admin/dxp1p/bdump/dxp1p_arc0_5962.trc:
ORA-16055: FAL request rejected
ARCH: FAL archive failed. Archiver continuing
Mon Jul 30 17:47:27 2012
ORACLE Instance dxp1p - Archival Error. Archiver continuing.
Mon Jul 30 17:47:57 2012
Thread 1 cannot allocate new log, sequence 168102
Private strand flush not complete
Current log# 4 seq# 168101 mem# 0: /u02/dxp1p/redolog/redo04a.log
Current log# 4 seq# 168101 mem# 1: /u03/dxp1p/redolog/redo04b.log
Beginning log switch checkpoint up to RBA [0x290a6.2.10], SCN: 12200747321258
Mon Jul 30 17:47:57 2012
Thread 1 advanced to log sequence 168102 (LGWR switch)
Current log# 5 seq# 168102 mem# 0: /u02/dxp1p/redolog/redo05a.log
Current log# 5 seq# 168102 mem# 1: /u03/dxp1p/redolog/redo05b.log
Mon Jul 30 17:47:58 2012
ARC1: Archivelog destination LOG_ARCHIVE_DEST_2 disabled: destination Data Guard configuration error
=================================================================
I changed back right away since this is critical production DB. Maybe it works, but I may not wait enough long time for the archive send resume? I will also need to create 2nd standby. My plan is to remove the dg broker, since this is not used for long time anyway. To add 2nd standby by changing the primary DB parameter log_archive_dest_3.
Please advice. Thanks!

Hello;
Would follow this note :
How to Safely Remove a Data Guard Broker Configuration [ID 261336.1]
What type of second Standby, just another physical ?
Since you don't find my information helpful I won't waste anymore of your time.
Best Regards
mseberg

I have 3dparty software wirelessly with a cryptographic authentication system without my consent (seems to be new technology developed by stanford) obtaining ownership of my iPhone 4s software and controlling it with remote device to jail break. Now what?

I have 3rd party software wirelessly injected and used on my iphone with a cryptographic authentication system without my consent (seems to be new technology developed by stanford and apple security is not updated for this technology) obtaining ownership of my iPhone 4s software and controlling it with remote device to jail breaking my phone, adding and removing software, changing settings all from a remotely controled device from different location (I have a Mac address I'd of this device to know for sure). Almost undetectable. When I look at the legal section of my phone it shows a list of all the unauthorized 3rd party software "as is" copyright encrypted on the phone. This is the most basic way to legally steal software of any kind. Because of this legalality 3rd party ownership have total control of certain software correlated with hardware use including visualization technology, etc. most people luckily will never have this happen to them so it's unlikely many readers have not a clue of what I'm saying currently. Either way, without needing to obtain specific warranty of any kind "as is" copyright control makes system restores not a solution because the source code is not directly encrypted on the actual hardware device only a copy right notice must appear on the specific device 3rd party software validation making it extremely difficult for me to take control of the situation. Apple claims their iOS technology prevents this type copyright obstruction from being possible, however, according to my phone a new form of technology was used developed by Tom wu of Stanford university called the STANFORD SRP AUTHENTICATION TECHNOLOGY which uses Some form of cryptographic authentication system and uses quote "secure remote password" which seems to suceed in hacking iOS apple technology apple claims is not possible to jailbreak an unstolen phone or without the owners consent As well as loading the device with 3rd party copyright Notices to make all of this legalized. My phone shows atleast 30 pages worth of legalized 3rd party copyright permissions! Yesterday my apple care provider labeled me a jailbreaker and refused to look at my legal documented proof which completely blew my mind because it voides my apple care contract I spent 100 on. This employee did not take all factors into consideration and made quick assumptions as well as verbally speaking to me as I'm an automatic criminal. I left the store yesterday with no payed insurance help on a problem I had no control over and couldn't prevent, leaving with voided contracts. This is an apple users worst nightmare and I have spent days researching all of this like i am some kind of lawyer only to be able to use my phone the way it should and spent alot of money on. I can legally backup any claim I have just wrote above currently and have a large source of data collected to prove apple is wrong in voiding insurance support on this issue. The problem lies in apple avoiding and not wanting to believe their software can legally be obtained ot "hacked". Yet still labeled a jailbreaker basically.. What should I do????? Been to local apple store 3 times and rebooted my phone as well sprint service restore 4 times and spoke with reps twiice on the phone. Spoke with my phone provider who said apple has full control over these matters so they can't help me. My case is according to apple "still open"...Anyone else heard of this or of Stanford's office of technology licensing? Maybe I need to buy a blackberry again or just use a landline so I can stop being my own lawyer and focus on other productive areas in life instead of this horrible mess. I shouldn't have to prove to apple I not a jailbreaker they should have to prove I'm one before voiding support I desperately need!!

Mullaly75 wrote:
I assume u guys don't understand what open source software is
Yes, I think most of us do understand what open source software is. It sounds as if you don't. Here's some information:
Open-source software (OSS) is computer software that is available in source code form: the source code and certain other rights normally reserved forcopyright holders are provided under an open-source license that permits users to study, change, improve and at times also to distribute the software.
Open source software is very often developed in a public, collaborative manner. Open-source software is the most prominent example of open-sourcedevelopment and often compared to (technically defined) user-generated content or (legally defined) open content movements.
from http://en.wikipedia.org/wiki/Open_source_software
Yes, Tom Wu of Stanford wrote a paper on something called Secure Remote Access Protocol. It's a form of Asymetric Key Exchange and has nothing to do with hacking anything. It's actually intended to protect data.

Apple, what have you done? 8.01 makes my ipad seems like it is back on dial up. Don't fix what ain't broken, or is your policy break it so we have to fix it?

Apple, what have you done? 8.01 makes my ipad seems like it is back on dial up. Don't fix what ain't broken, or is your policy break it so we have to fix it?

Hi The best option is to do a factory Reset this will get rid of any bugs And set up iPad as new. Just use same Apple ID you will get all your Apps & Data back. Do this over Wifi Cheers Brian

Cant seem to break up a 1hr movie into 10min segs.

i want to upload a 1hr movie to youtube. i cant seem to break up the movie into smaller segments for upload. ive tried chapters markers, cut and paste, chop(whatever). during this ordeal i have used up tons of disk space on files i cant find (but forget about that just help me break up this movie.
thanks
tencups

welcome tencupsdavid to the  iMovie boards..
obviously, you totally miss the basic functions of this edit app, e.g. chapter markers have for sure absolutely no effect on the length of a projectc nor on an export..
please use the Help feature of iMovie how to import, drag clips into timeline, how to edit those clips and how to export just selected clips o a project's timeline...
aside: this board is about version 5 of iMovie (HD= vers.5, iMovie6= vers. 6, iM08= version 7)... if you need addtional help, check which version is in use.. (=different versions/diff. help, advices...)

My iPad 1 has suddenly started to sync Events from my iPhoto library incorrectly. It seems to break down Events to separate dates - so if an Event was photographed over 2 days, it is showing as 2 separate events with the same name.

My iPad 1 has suddenly started to sync Events from my iPhoto library incorrectly. It seems to break down Events to separate dates - so if an Event was photographed over 2 days, it is showing as 2 separate events with the same name.

Posted this before I realised there is an update for the iPhoto app 9.1.3 which sorts the problem.

Package seems to break when distributed with SCCM 2012

Hello.
I made a package with an old Java version and a link to the locally installed IE, that opens a special webpage.
When i install this manually with the
AppV_DeployNPublish tool on my testmachine (that is a copy of a domain computer), the package works. It opens the webpage and uses the Java in the package (checked with ProcessExplorer). I can even upgrade the java or delete it and it works.
But when we deploy it with the SCCM 2012 to a domain computer, tha package seems to break. It opens the webpage but uses the local installed Java (checked again with ProcessExplorer), that ends with the software doesn't work. We must use an old java version
to get the software to function properly!
We are using the App-V 4.6.2 version...
Why is it like this?
Regards,
Peter

To properly isolate Java you need to make sure the AppData\LocalLow\Sun folder is part of your App-V package. Also adding the -noframemerging switch to the IE command line can help as sometimes it likes to latch onto the IE process already running outside
the bubble rather than starting a new one.
Lots more info here:
http://packageology.com/2014/02/sequencing-java-the-definitive-guide-part-1
Dan Gough - UK App-V MVP
Blog: packageology.com
Twitter: @packageologist
LinkedIn

Xorg update seems to break ATI Catalyst

Hi all
Just a quick note for users of the proprietary ATI Catalyst driver, the latest Xorg update seems to break it (at least on my system).
Boot sequence proceeds as normal until GDM loads, then the screen oscillates slowly between black and white.
Any suggested fix?

Hi there
Did Pacman upgrade your kernel alongside Xorg?. Maybe you need to rebuild the fglrx module.
Best of Luck

"ifstream integer" seems to break the stream in Xcode 4.

I have a piece of code which is used to compile and work on every platform I tested, but after updating to Xcode 4, it started do behave oddly...
(this is not working, which used to work before Xcode 4)
int total;
char buf[1024];
ifstream ci;
[... some code ... everything ok]
ci >> buf; //buf is filled ok
[... more code ... everything ok]
ci >> total; //total contains an invalid value, it should be 629, but gives me 88844(even if I edit the file to any other number)
ci >> buf; //buf is becomes empty, and everything reading ci will read empty
[... some code ... nothing using ci works anymore]
I found out if passing the number to the same char buffer I was using didn't break it... so I managed to fix it using atoi.
(this is working with Xcode 4)
int total;
char buf[1024];
ifstream ci;
[... some code ... everything ok]
ci >> buf; //buf is filled ok
[... more code ... everything ok]
ci >> buf; // buf is filled correctly with "629" characters
const char * totalStr = buf;
total = atoi(totalStr); // converts to int correctly
ci >> buf; // every other thing is still working!! yay!
[... some code ... ok!]
It seems doing "ifstream >> integer" is breaking the stream... and if I initialize total variable before "ci >> total" the value still the same... so the >> operator is returning before the conversion even apply on the variable.
I managed to fix it, but I still think the first code was correct, and I'm afraid I face other problems like this on Xcode 4...
Why is that happening? Any ideas?

I found out this flag on my project file(on Preprocessor Macros) was the cause:
GCCPREPROCESSORDEFINITIONS = GLIBCXXDEBUG=1 GLIBCXX_DEBUGPEDANTIC=1
I'm not sure what it does... I'm not sure even why it is there. But after deleting it, it worked. Sorry to bother you all with this.

Upgrade from 10.1.0.4 - 10.1.0.5 seems to break ArcIMS/ArcSDE

Hello All,
We were recently obliged to upgrade to 10.1.0.5 to address a replication bug, and doing this seems to have re-introduced a problem w/ ArcIMS/ArcSDE. The problem is w/ geodetic areas larger than 1/2 surface of earth, not all of the expected data are returned. Once you zoom in, all the data are correctly returned. The behaviour is identical to a problem that was fixed w/ the release of ArcIMS/ArcSDE 9.1.
Strange thing here though is that the only thing that changed w/ our system to reintroduce this problem was the upgrade to 10.1.0.5 - The ESRI software was not modified.
I realize that this is at least partially an ESRI problem, but given that the Oracle upgrade seems to have triggered the problem I was hoping that someone here could help me.
Thanks!
-- john

Hello All,
We were recently obliged to upgrade to 10.1.0.5 to
address a replication bug, and doing this seems to
have re-introduced a problem w/ ArcIMS/ArcSDE. The
problem is w/ geodetic areas larger than 1/2 surface
of earth, not all of the expected data are returned.John,
You are not supposed to have any geometries in SDO that are larger than 1/2 the surface of the earth. Exactly 1/2 is fine (I use two square polygons for ocean backdrop), but any more that is illegal. Here's why:
ESRI uses a planer (flat earth) data model. That is, everything is defined on a plane, even for geodetic, and then "unprojected" to do the math (using 16-bit integer coordinates). Blocky and crude, old school. Only 32k points in each direction to cover the entire planet. We have an application that actually uses geodetic coordinates, but needs a local boundary so that we can actually store some detail. Crazy!
Oracle SDO uses a "round" earth model for geodetic. It also stores coordinates using NUMBER as a "floating point" (not internally, but it works that way) with up to 38 digits to represent the value. Very precise, and we can store data for any place on the planet with high precision.
Thus the mismatch...
You also (the last time I tried it), cannot draw a single line from say, London to the pole, and then back down to Anchorage in the ESRI model, since it cannot be correctly mapped to a flat surface. However, this is perfectly valid for geodetic SDO geometries, which is nice, since planes might actually do this.
From the Spatial User Guide:
6.2.4 Other Considerations and Requirements with Geodetic Data
...The following size limits apply with geodetic data:
■ No polygon element can have an area larger than one-half the surface of the Earth.
In a line, the distance between two adjacent coordinates cannot be greater than or
equal to one-half the perimeter (a great circle) of the Earth.

Output with line breaks seemingly randomly placed

Hola -
I've adapted Tyler Muth's RSS feed article (http://tylermuth.wordpress.com/2008/01/22/producing-rss-from-plsql/) for the most part successfully; however, my output has breaks in the lines at inappropriate places, often in the mddle of an XML element tag for example. The placement of the breaks varies if I change the values of l_idx, l_len, l_defrows, l_maxrows, and l_desclen, but the breaks persist. They're not reflected in the code below but I've added the utl_file.fflush to no good effect.
Examples of broken output:
<pre>
<title>Three
prehistoric inventions that shaped us /</title>
<guid
isPermaLink="false">226402455778123622</guid>
<pubDate>Thu, 04 Aug 2011 12:36:22
EST</pubDate>
<guid isPermaLink="fal
se">220922455778123622</guid>
<item
>
</pre>
It's a lot of data so I won't post it here, but here's the code & the table; any ideas as to where to start investigating will be greatly appreciated.
Code:
create or replace
PROCEDURE "RSSLOOP3" ( fund_in IN VARCHAR2, fund_in2 IN VARCHAR2 := 'XXX')
is
-- customizable parameters
l_title varchar2(255) := ' New Titles Since ' || to_char(sysdate - 90, 'MM/DD/YYYY');
l_link varchar2(255) := 'replace this' || fund_in || '.rss';
l_description varchar2(255) := 'This is a feed of changes to items ' || fund_in;
l_language varchar2(255) := 'en-us';
-- end customizable parameters
l_version varchar2(10) := '2.0';
l_clob clob;
l_idx pls_integer := 1;
l_len pls_integer := 255;
l_defrows pls_integer := 100;
l_maxrows pls_integer := 100;
l_desclen pls_integer := 250;
-- for output to file
fh UTL_FILE.FILE_TYPE;
path VARCHAR2(30);
filename VARCHAR2(30);
begin
path := '/http/live/screens/rss/';
filename := fund_in || '.rss';
fh := UTL_FILE.FOPEN(path, filename, 'w');
for i in (
select xmlelement( "rss",
-- Begin XML Header Block
xmlattributes( l_version as "version"),
xmlelement( "channel",
xmlforest( l_title as "title",
l_link as "link",
l_description as "description",
l_language as "language"),
-- End XML Header Block
-- Begin List of Individual Articles or Items
xmlagg(
xmlelement( "item",
xmlelement("title", x.title),
xmlelement("link", x.link),
xmlelement("description", convert(x.description, 'UTF8', 'AL32UTF8')),
xmlelement("callnum", x.callnum),
xmlelement("pubDate", to_char(x.updated_on,'Dy, DD Mon RRRR hh24:mi:ss')),
xmlelement("guid", XMLATTRIBUTES('false' as "isPermaLink"),x.id||to_char(x.updated_on,'JHH24MISS'))
-- End List of Individual Articles or Items
) as result
from ( -- Actual Database Query that populates the list of Items
select id,title,link,description,updated_on, callnum
from drx_rss_feeds
where (fund like fund_in||'%')
and rownum < (l_maxrows+1)) x)
loop
l_clob := xmltype.extract(i.result,'/').getclobval;
exit;
end loop; --i
--- OUTPUT RESULTS
for i in 1..ceil(dbms_lob.getlength(l_clob)/l_len) loop
UTL_FILE.PUT_LINE(fh,(substr(l_clob,l_idx,l_len)));
l_idx := l_idx + l_len;
end loop; --i
UTL_FILE.FCLOSE(fh);
end rssloop3;
Table:
CREATE TABLE "DRX_RSS_FEEDS"
"ID" VARCHAR2(32 BYTE),
"TITLE" VARCHAR2(255 BYTE),
"DESCRIPTION" VARCHAR2(4000 BYTE),
"LINK" VARCHAR2(1000 BYTE),
"AUTHOR" VARCHAR2(255 BYTE),
"UPDATED_ON" DATE,
"CALLNUM" VARCHAR2(255 BYTE),
"FUND" VARCHAR2(10 BYTE)
)

Or have a look at the Oracle Documentation, for instance at the parameters for utl_file.fopen
max_linesize Maximum number of characters for each line, including the
newline character, for this file (minimum value 1, maximum
value 32767). If unspecified, Oracle supplies a default value of
1024.It wouldn't surprise me if your randomly placed line breaks are all 1023 characters a part.
Anton

AIToolboxSuite::AddToolbox seems to cause malloc break. (OSX, CS6)

Hi all,
I'm trying to write something that detects when tools are selected and deselected using AIToolboxSuite, but am running into an issue where I get the following error when I call AIToolboxSuite::AddToolbox
Adobe Illustrator(20630,0x7fff73fe1180) malloc: *** error for object 0x8: pointer being freed was not allocated
*** set a breakpoint in malloc_error_break to debug
Here's the code below. I'm calling this in my plugin's PostStartup method, but the issue seems to happen even if I move this code to another section (e.g. when my plugin is selected)
Usually I notice the following during runtime: AddToolbox is called, I see a bunch of messages (including toolbox messages) start coming in (I have some debug print statements on Plugin::Message)), but before the AddToolbox call is finished, the malloc error occurs. So far I'm stumped as to what could be not allocated on my end.
The error as a screenshot is below - note the tool selected message gets called (I have some basic if statements to filter it / print a message) before the issue occurs:
API Version : Adobe Illustrator CS6 SDK Build 682.6.1.6.1.1.0.0.0.1.1
Illustrator version: 16.0.0
OSX Version: Mountain Lion

in case the code image is hard to read, here it is:
        //Start watching tool selections
            int count;
            ASErr toolMsgInitResult = kNoErr;
            toolMsgInitResult = sAIToolbox->CountToolboxes(&count);
            aisdk::check_ai_error(toolMsgInitResult);
            if(count > 0){
                NSLog(@"grabbing toolbox");
                toolMsgInitResult = sAIToolbox->GetNthToolbox(0, &fToolboxHandle);
                aisdk::check_ai_error(toolMsgInitResult);
                if((fToolboxHandle != NULL) )
                    toolMsgInitResult = sAIToolbox->AddToolbox(fPluginRef, "SDK Annotator", &fToolboxHandle);
                    aisdk::check_ai_error(toolMsgInitResult);
                NSLog(@"grabbed toolbox");
            else {
                NSLog(@"no toolbox yet");

Language packs seem to break spell-check language selection

I suspect this is a bug, but maybe I am doing something wrong, so I'll ask here before submitting a bug report.
I have Thunderbird 31.2.0 installed on OS X Mavericks. I am pretty sure it is the en-GB version, but I have several language packs installed, including the (presumably redundant) en-GB pack. I also have installed (and sometimes uninstalled) the add-ons "Quick Locale Switcher" and "Simple Locale Switcher" at various times to switch the user interface language. (The reason I have included the two is, I had the "Quick" switcher first, and suspected what I was seeing might be a bug in the add-on, so I switched to the other.)
Now, the symptom. When the user interface language is set as en-GB, the spell-checker language choice in the "Preferences" menu (I guess "Options" in Windows, and I don't know what in Linux) is respected - I can type an email in one language, stop, switch the spell-checker language half way through, and the real-time spell-checking is then by the new language exactly as I would have expected. But, when the user interface language is anything other than en-GB (I haven't tried en-US, but I have tried German and Russian), the spell-check language follows the user interface language, and changing the spell-check language option in the "Preferences" menu has no effect whatsoever on anything.
This problem persisted even after I removed the two language-switching add-ons. Then, I removed all the language packs (which forced my user interface back into en-GB), and magically the spell-check language selection started working again.
So I am thinking the problem is driven by the user interface being from a language pack. When the user interface language matches the original install language, the spell-check language selection works; when the user interface language is something else, the spell-check language selection is ignored, and the actual spell-check language follows the user interface language.
The "Simple Locale Switcher" does not seem to allow the user interface language and the spell-check language to be switched independently, but "Quick Locale Switcher" does. However, this feature doesn't seem to work, nor does switching the spell-check language through the Thunderbird Preferences rather than the add-on (unless the user interface language is the default en-GB).
Has any one else seen a problem like this? Is there a way to fix it? (Maybe futz with the language settings on the other side of the "Here Be Dragons" warning?)

Before chasing dragons, right click in the body of a mail in the compose window and set the spell check language there. I have no idea if it will work, but it might add to the over all body of knowledge for a bug report.
Please post a link to any bug report you make.

HT201422 Still can't sign in! lately iOS updates just seem to break things!

None of the steps have solved the issue of getting an activation error when trying to sign in to FaceTime. Worked fine before latest iOS update. Apple has really started to go downhill since jobs checked out.

Here are two, long, ongoing discussions about the same problem. Maybe you can find seem help in one of them. I really do understand your frustration and I wish that I had an answer for you. The update to iOS 8.1.3 was supposed to address this issue, but for many it didn't work.
imessage and Facetime sign in activation error iPad ios8.1.2
Tried everything, FaceTime has an error occurred during activation on my iPad Air.
You might want to consider contacting an Apple Store to make a Genius Bar appointment and see if they can help.

"clock save interval" seems to break ntp

Someone asked me how close to "reality" ntp would keep a router clock and I didn't know so started graphing the "offset" on an 877 running 15.1(4)M6.
I enclose the first few days worth of this as "ntp-week.png" and just the last 24 hours in "ntp-day.png".
As one can see the offset is mostly a few tens of milliseconds but there are spikes up to 1.4s from time to time. After a few days I noticed that when these happened, they seemed to be 8 hours apart or sometimes multiples of 8 hours. I later discovered that some of the spikes are less than 5 minutes long so MRTG never sees them and in fact they seem to be every 8 hours as far as I can tell.
It occurred to me that I had the command "clock save interval 8" in the config, as seems to be recommended when using ntp on a device with no battery-backed clock. So I removed it, and since then the "offset" has never gone over 6ms.
Has anyone else experienced "clock save interval" apparently causing problems for ntp like this?

I would not do it except an error comes up, because many unwanted changes in the file appear with IDML export.
But what is the content in your file?
Did you embed graphics?
What kind or type of graphics did you use?
What is the size of the file?
Are all used fonts ok?

10.5.3 seemingly breaks PyMSNt 0.11.2

Similar Messages

Maybe you are looking for