10.68 seems to have broken everything! Any clues

After downloading the 10.68 update, nothing seems to work. I figured it was extortion, but I bought Lion to see if that was now the problem. I am on my third download of Lion! The installation keeps failing with the error that the download was corrupted or tampered with. I have rebuilt permissions, repaired the disk (no errors), restarted and booted in safe mode. I am now trying to download the installer in safe mode to see if that works. Anyone have a clue?

I would normally agree with you and I was poised to wipe the drive and start over with Snow Leopard, this is an '09 iMac. Most of the Apple apps were quitting on launch after the 10.68 update. Permissions were repaired more than once and the disk was verified using the DU on the install disk. Single user mode file system check was clean. I finally turned off sleep and screensaver, started in safe mode and was able to get a good download of Lion on the third try. The install went smoothly but afterwards I got a bunch of kernel panics and general craziness that did not make any sense. I started in safe mode again and looked at login items. There was an old iTunes helper with a caution sign. I dumped that from the startup list, cleared the cache and restarted. It has been running smoothly for several hours as I edited and uploaded video.
I am keeping my eyes crossed.

Similar Messages

Flash player won't work or download. It says it no longer supports power pcs. I am running 10.5.8 on my ibook G4. Seem to have tried everything. i.e. chrome, firebird, archived flash players, etc. All not supported. Any insight???

Flash player won't work or download. It says it no longer supports power pcs. I am running 10.5.8 on my ibook G4. Seem to have tried everything. i.e. chrome, firebird, archived flash players, etc. All not supported. Any insight??? It started when I tried to upgrade current flash player and it said I needed to uninstall current version, which I did, and then it wouldn't download the current one giving me the not supported story! Please help!!!!!!

Hi Andy, that is correct, they don't support PPC Macs anymore.
You should first uninstall any previous version of Flash Player, using the uninstaller from here (make sure you use the correct one!):
http://kb2.adobe.com/cps/865/cpsid_86551.html#prob1=uninst,os=m10.6,
Download this if you haven't...
http://fpdownload.macromedia.com/get/flashplayer/installers/archive/fp10.1.102.6 4_and_9.0.289.0archive.zip
Once downloaded if it doesn't unzip automatically the double click on that file.
Look for the fp10.1.102.64_and_9.0.289.0archive folder, open it, look for the Flash Player 10.1.102.64 folder & open and look for 101r10264 folder & open it, double click on the flashplayer101r102_64_ubmac.dmg file, choose the Install Adobe Flash Player file to install... they don't make it easy!
Or smaller here...
http://dl.dropbox.com/u/450421/flashplayer10_1r82_76_ub_mac%20copy.dmg.zip
Stand alone player...
http://dl.dropbox.com/u/450421/LastFlashPPC.zip
Or free 3rd party...
http://www.wimpyplayer.com/products/wimpy_standalone_flv_player.html

Update seems to have broken openbox theming.

I updated about 2 hours ago and it seems to have broken a lot of my window manager.
I use openbox as a standalone window manager and have had no issues so far.
I update every few days and today caused the resizing-freeze issue, so I downgraded the suggested packages which fixed that.
However I have another issue with theming.
Programs such as firefox, thunderbird, thunar etc... all have the correct theme. However I use some gnome programs such as rhythmbox and nautilus and neither of these are themeing correctly as well as terminator and all appear to have the default gnome theme.
I use obconf and lxappearence for themeing normally, however these seem to have no effect.
I've done a fair amount of searching and googling and am now very tired and am going to bed.
If anyone has any advice it would be much appreciated. If I am being stupid in my sleep deprived state please feel free to point it out XD.

Hi all. I'm also running Openbox and have done the following so far;
1. Installed gnome-themes-standard. Created a new folder ~/.config/gtk-3.0/; Created the file in the folder "settings.ini" with the following code;
[Settings]
gtk-application-prefer-dark-theme = true
gtk-theme-name = Adwaita
gtk-fallback-icon-theme = gnome
Thanks to the info on the thread here
2. Checked out the post here. Downloaded the tar of Adwaita from this.page and did the usual "makepkg -s" magic and rebooted.
What I'm now getting is nm-applet in tint2 with the dark theme of Adwaita which is great but doesn't really match my dark theme axiomd but it's better than before.
What I'm wondering is how to manage this in lxappearance, change font etc?? If I select the theme Adwaita it's a light theme? Having looked in the directory there is both gtk-2.0 (i think this is the light one?) and gtk-3.0.
I've also noticed that it is affecting rhythmbox; slow to load and the status icon setting in the plugins is missing, so you close the GUI and find the app quits rather than the previous behaviour where it would close but the notification icon would still run in tint2 enabling one click control access to the GUI again.
I appreciate this is obviously a new implementation and will take a bit of time to learn but any tips from those in the know would be great!? TIA.
Last edited by phrac (2011-05-01 11:10:09)

After upgrading to Mavericks, I seem to have lost everything in my Outlook for imac 2011.

after upgrading to Mavericks, I seem to have lost everything in my Outlook for imac 2011.
all my email accounts, all my emails, all my folders & subfolders (received & sent) ... everything.
help!

Remove Adobe plug ins if any.
Macintosh HD > Library > Internet Plug-ins
AdobePDFViewNPAPI.plugin
AdobePDFView.plugin

Numbers seems to have broken

I was using Numbers this morning -- no major problem except that it didn't properly recover from page view (leaving junk on the right of the table).
This afternoon it seems to have broken. ALL my files, including the one from this morning have mostly blank cells. The contents seem to be there - if I click a cell the contents show up in the formula bar (or whatever it's called). And if I double-click to edit the contents reappear. But then go away again as soon as I finish with the cell.
Some (but not all) of the header cells in Gray Headers style show up, and some are simply a pair of faint white squares at the end of the text string. Check boxes show up OK.
Oh, and if I double click on a date it shows up for editing with the year as 00002010.
This is very distressing. I have a lot of data locked up in Numbers and as of now, all is unusable.
What's going on?

Thanks for the help. Actually I should have mentioned that I tried that (I've been using Macs since my Mac IIfx in 1990 so I picked up a few tricks) as well as restarting. The problem remains.
In the meantime I've tried opening my files (remotely) with another machine. No problems. It's local.
Next I'll try reinstalling Numbers, if I can find the disks
Richard

I am running 10.5.8. New to mac. Cannot find iCal in apps. folder. Seems to have disappeared. Any suggestions on how to get it back?

I am running 10.5.8. New to mac. Cannot find iCal in apps. folder. Seems to have disappeared. Any suggestions on how to get it back?

4mccarthys,
If you are certain that iCal is no longer present on your computer...
To reinstall iCal:
1. Insert the Leopard Installation disk into the computer.
2. The disk will appear on the desktop.
3. Double click on the "Optional Installs" folder.
4. Double click on the "Optional Installs.mpkg."
5. Click on (Continue) in Introduction.
6. Click on (Continue) in Software License Agreement.
7. Click on (Agree) to agree to the terms of the software license agreement.
8. Click on the disclosure arrow ▶ next to Applications.
9. Select (✓) iCal.
10. Click (Continue).
11. After iCal has been reinstalled, download and install the Mac OS X 10.5.8 Combo Update to bring iCal up to the most recent version.

IMAQ Upgrade seems to have broken some code

We recently upgraded from the IMAQ 4.0 to 4.5, and some pieces of labview code we wrote have broken. When i boot it up, it gives me warnings like the ones at the bottom. I figure the simplest fix is just to download the old .dll files and overwrite them somehow...does anybody have any ideas on how to do this?
imgBufferElement.vi
    - The shared library expected to be at "imaq.dll" was loaded from "C:\WINDOWS\system32\imaq.dll".
imgClose.vi
    - The shared library expected to be at "imaq.dll" was loaded from "C:\WINDOWS\system32\imaq.dll".
imgCreateBufList.vi
    - The shared library expected to be at "imaq.dll" was loaded from "C:\WINDOWS\system32\imaq.dll".
imgSessionAttribute.vi
    - The shared library expected to be at "imaq.dll" was loaded from "C:\WINDOWS\system32\imaq.dll".
imgSessionLineTrigSource2.vi
    - The shared library expected to be at "imaq.dll" was loaded from "C:\WINDOWS\system32\imaq.dll".
imgSessionTriggerConfigure2.vi
    - The shared library expected to be at "imaq.dll" was loaded from "C:\WINDOWS\system32\imaq.dll".
imgSetRoi.vi
    - The shared library expected to be at "imaq.dll" was loaded from "C:\WINDOWS\system32\imaq.dll".
SessionLookUp.vi
    - The shared library expected to be at "imaq.dll" was loaded from "C:\WINDOWS\system32\imaq.dll".

gswang wrote:
Oops, sorry, actually. I'm not sure what version it used to be, but it currently is 4.1. Is there a way to determine what we upgraded from?
No and those errors are no errors but warnings and as such in fact a bit overreacting. What it says is that a Call Library Node trying to load imaq.dll (which without path means to load it from the one of the Windows standard search paths where the system directory is also part of) has been redirected to load said DLL from the system directory. A rather strange message in fact as those are virtually the same for a properly configured Windows system. Bascially you can ignore this specific warning completely as it informs you of something that Windows will do anyhow, unless you start to copy and move DLLs that were originally installed in the system directory.
What LabVIEW version is that?
Rolf Kalbermatter
Message Edited by rolfk on 08-11-2009 09:00 AM
Rolf Kalbermatter
CIT Engineering Netherlands
a division of Test & Measurement Solutions

Synced new 4G with backed up data from previous iPhone, now have 3G. Any clue??

Lost 3G phone, purchased new 4G, synced up with laptop - have data now and a 3G phone. Any clues?

http://www.apple.com/iphone/specs.html
GSM model: UMTS/HSDPA/HSUPA (850, 900, 1900, 2100 MHz); GSM/EDGE (850, 900, 1800, 1900 MHz)
CDMA model: CDMA EV-DO Rev. A (800, 1900 MHz)

Lion seems to have broken aspects of AppleScript code. Any suggestions for the following?

The following script works fine on a Snow Leopard machine, but hangs or throws an error during save out on a Lion machine:
=====================
global thumbDrive
global thumbDrive2
global hardDrive
global thePath
global filePath
try
-- The following PowerMate tell informs the powermate device "One button" to set it's light to a slow pulse rate.
          tell application "PowerMate"
pop light state
                    set aDevice to first device
                    tell aDevice
make light state with properties ¬
                                        {state type:pulsed, pulse rate:0.2, name:"Alert x3"}
                    end tell
          end tell
on error
          display dialog "Powermate device not detected." buttons {"Ok"} default button 1
end try
tell application "Finder"
delay 2 -- This delay allows the thumbdrive or volume to fully mount before trying to pull data from it.
          set hardDrive to (get name of startup disk) as alias -- Sets hardDrive to disk 0 for error checking
          set thumbDrive to (get name of disk 1) as alias -- This sets an alias of the name of disk 1 for error checking
          set thumbDrive2 to (get name of disk 1) -- This set the actual path of disk 1
          if thumbDrive is equal to hardDrive then -- Checks to see if disk 1 is equal to disk 0 if so we move on to setting thumbDrive to disk 2 in the following try
                    try
                              set thumbDrive to (get name of disk 2) as alias -- check for global variables
                              set thumbDrive2 to (get name of disk 2)
                    on error
                              set thumbDrive to (get name of startup disk) as alias
                    end try
          end if
          set filePath to POSIX path of thumbDrive2 -- Sets the posix path of the thumbdrive
end tell
-- The following sets and formats the file name to the date and time.
on recordMovie() -- This is a function for actually recording the video and saving it
          with timeout of 86400 seconds -- sets the timeout of the session to 24 hours
repeat
                              set buttonAnswer to "Ok"
                              tell application "Finder"
                                        set theDate to current date
                                        set y to the year of theDate
                                        set m to month of theDate
                                        set d to day of theDate
                                        set h to hours of theDate
                                        set mi to minutes of theDate
                                        set s to seconds of theDate
                                        set thePath to filePath & "/" & y & "-" & m & "-" & d & "_" & h & "-" & mi & "-" & s & ".mov"
                              end tell
                              tell application "QuickTime Player"
activate
new movie recording
present document 1 -- Sets the recording to full screen mode, hiding everything else on screen
                                        beep
                                        display dialog "Press button when you are ready to record" buttons {"RECORD"} default button 1
                                        try
                                                  tell application "PowerMate" -- Tells the powermate device to pulse quickly once we start recording
pop light state
                                                            set aDevice to first device
                                                            tell aDevice
make light state with properties ¬
                                                                                {state type:pulsed, pulse rate:0.4, name:"Alert x3"}
                                                            end tell
                                                  end tell
                                        on error
                                                  display dialog "Powermate device not detected." buttons {"Ok"} default button 1
                                        end try
start document 1 -- starts recording
                                        set answer to the button returned of (display dialog "Press button to stop recording." buttons {"STOP"} default button 1)
stop document 1
                                        repeat
                                                       try
            save document 1 in thePath
                                                                      exit repeat
                                                       on error
                                                                      display dialog "There was an error saving your recording to your thumb Drive. Plug your thumbdrive back in and click ok" buttons {"Ok", "Cancel Do not save"}
                                                                      set buttonAnswer to the button returned of the result
                                                                      if buttonAnswer is equal to "Cancel Do not save" then exit repeat -- exit the save repeat
                                                                      delay 3
                                                       end try
                                        end repeat
close document 1
                                        quit
                              end tell
                              if buttonAnswer is equal to "Cancel Do not save" then exit repeat -- exit the function repeat
                              tell application "Finder"
activate
                                        display dialog "Press Ok to record again, or eject to eject your thumb drive." buttons {"Ok", "Eject"}
                                        set buttonAnswer2 to the button returned of the result
                                        if buttonAnswer2 is equal to "Eject" then exit repeat
                              end tell
                    end repeat
                         tell application "Finder"
            eject thumbDrive
            delay 5
       end tell
      end timeout
end recordMovie
if hardDrive is equal to thumbDrive then -- This script will run whether a volume is inserted or ejected this if statement kills the script if it was an ejection.
else
          try
                         tell application "System Events" -- The following checks to see if there is more than 500MB of space on the drive, if less than it prompts the user.
           set freeSpace to round ((free space of disk thumbDrive2) / 1024 / 1024 / 1024)
           set spaceNeeded to "0.5"
       end tell
          end try
          if freeSpace is less than spaceNeeded then
                    tell application "Finder"
activate
                              display dialog "You may not have enough free space, you should have atleast 500 MB availble for an hour long recording." buttons {"Eject Disk", "Continue Anyway"}
                              set buttonContinue to the button returned of the result
                    end tell
                    if buttonContinue is "Eject Disk" then
                              tell application "Finder"
eject thumbDrive
                                        delay 5
                              end tell
                    else
recordMovie() -- calls the record movie function if the user chooses continue instead of eject
                    end if
          else
recordMovie() -- calls the record movie function if there is more than 500MB on the volume
          end if
end if
try
          tell application "PowerMate" -- This tells the powermate "One button" to turn off it's pulse and be dark.
pop light state
                    set aDevice to first device
                    tell aDevice
make light state with properties ¬
                                        {state type:steady, brightness:0.0, name:"Alert x3"}
                    end tell
          end tell
on error
          display dialog "Powermate device not detected." buttons {"Ok"} default button 1
end try
======================
In Console messages I was finding the following along with error -1708:
.sdef warning for argument 'FileType' of command 'save' in suite 'Standard Suite': 'saveable file format' is not a valid type name.
So, I thought I'd change the save line as follows:
     save document 1 as "QuickTime movie" in thePath
While this didn't solve the problem, it threw an error and allowed the script to continue with the error dialog rather than hang.
Interestingly, though, the Snow Leopard machine seems to register the same error and yet still manages to save the file correctly.
Any thoughts?
Cheers,
Anthony

Uninstall Parallels using the uninstaller that came with Parallels. Remove all third-party peripherals. Then restart the computer.

Update from apple software - seems to have broken displays

I have just taken delivery of my mac pro (felt like christmas) - ran through the setup all of 6 minutes (eat your heart out Bill) - ran software update as it popped up to get it up to latest settings etc..
now monitors do not work they flash on and off and display signal not detected every three to four seconds then come on then go black etc.. and it continues
they setup from the base installation was sweet and this only started after the update ran and rebooted
i can't seem to find any detaisl on a rollback feature or after zapping pram and disconnecting everything and rebooting still no change
any ideas
monitors are benq 22" in res 1680X1050 and as i said they were working brilliantly till the update ran
any help appreciated - think it might be re install of system software to get it back to original settings

You might want to add more details in "Computer Model Information" lines.
Is there any source of interference nearby?
The Mac Pro - does it run on a dedicated line / circuit? UPS and/or line conditioner? It shouldn't be putting a real tax on the circuit, unless it is shared with a lot of equipment. They've been known to push the limits for some.
I've seen more than a couple threads reporting problems with ViewSonic (gladly my LCD VGA is older and seems safe).
Are they running off X1900 Radeon?
Sometimes a system ships and even DIMMs can be loosened, maybe video card needs to be reseated?
Hopefully it is just a loose cable somewhere.

Safe Boot seems to have broken my W7 Bootcamp partition

MacBookPro Retina
OS X 10.8.3
BootCamp with Win7
Parallel's VM 8 using BootCamp Partition
This morning I was looking at my logs, and I saw a minor odd recurring error with a Spotlight process, so I Googled it, and found that I could fix it by doing a Safe Boot. So I shut down my running programs, and I did a SHUTDOWN on my Parallel's Windows 7 VM (running from my BootCamp partition). I performed the Safe Boot, OS X came up, and everything seemed fine until I tried to start a Win7 VM using Parallels. When I did that, I got a white progress bar that said "Windows is loading files", and then the WIndows Splash screen, and then the Windows startup recovery tool. The tool found no errors and so was unable to repair anything, so I closed everything, and rebooted into BootCamp mode, and I found the same sequence of events, but this time the startup tool said that it had repaired Windows and then it rebooted. But again the system went into startup repair mode, but it found no errors. Now, each time I boot to BootCamp Win7, the white progress bar is displayed, the startup recovery runs, but it finds no errors, fixes nothing, and then shuts down, only to recur again. I can F8 into the Windows boot menu, but any choice that I make (safe mode, reovery mode, etc.) gives me the white progress bar with the "Windows is loading files" message, and then the startup recovery tool. I can boot into OSx, and I can see all of the files on the BootCamp partition, but I can't boot to it.
What did Safe Boot do to my Windows boot process? How can I fix this? Thanks.
Mike

7 GB is on the low side, you really should have minimum 15GB.
Repairing permissions is an important part of regular maintenance, and should always be carried out both before and after any software installation or update.
Go to Disk Utility (this is in your Utilities Folder in your Application folder) and click on the icon of your hard disk (not the one with all the numbers).
In First Aid, click on Repair Permissions.
This only takes a minute or two.
Background information here:
http://docs.info.apple.com/article.html?artnum=25751
and here:
http://docs.info.apple.com/article.html?artnum=302672
An article on troubleshooting Permissions can be found here:
http://support.apple.com/kb/HT2963
If you were having any serious problems with your Mac you might as well complete the exercise by repairing your hard disk as well. You cannot do this from the same start-up disk. Reboot from your install disk (holding down the C key). Once it opens, select your language, and then go to Disk Utility from the Utilities menu. Select your hard disk as before and click Repair.
Once that is complete reboot again from your usual start-up disk.
More useful reading here:
Resolve startup issues and perform disk maintenance with Disk Utility and fsck
http://support.apple.com/kb/TS1417

My MacBook keyboard seems to have broken?

Hello, I've just turned my Macbook pro on and it seems certain keys (all fairly close to each other) don't seem to work and the volume adjust seems to go up in 1/4's rather than full blocks?
I'm confused, nothing has been spilt into the keyboard and a usb keyboard works just fine.
Any help?
Thanks
Adam
PS. I already tried resetting the PRAM

Well the fact the USB keyboard works fine sounds like something may have gotten stuck in any case. Even without spills, moisture can cause dust to coagulate under the keys. To verify it is broke, I would open the Character Keyboard from Apple menu-> System Preferences -> Language and Text -> Input Sources -> Check Show Input Sources in the menubar. Then from the Select Input Sources to use, select Keyboard and Character Viewer. Lastly, you'll find the Keyboard viewer in the menu in the upper right. This window will react to every single key as pressed. If you see a key that is darker gray that you aren't pressing, that is the faulty key.

The Treeview navigation seems to have broken my intranet .

Hmmmmmmm sometimes issues with SharePoint are like buses - earlier I found that could not open any word documents until installed Office 2010 SP2 32-bit but that is not why I am here :-( .
I am developing a new intranet for a client and am testing out a load of OOTB features to see which ones will best meet requirements we have defined, ahead of a live deployment. This led me to the Treeview widget to see if it will help with navigation.
I enabled it on the top level home site which worked but showed way too much information for my users. Hence, I went over to a member of the team to see what there view looks like ( without SC admin / site owner privileges).
He got this error ( see below) - turns our everyone does now include me ( after a refresh) ! Ouch. Now
this maybe due to our thin client environment . However this very strange. The only person who has ever changed the master page is me earlier this week when I enabled the breadcrumb but we have all been using this for days - have never
touched the control shown in error. I will see if anybody in the IT team hasn't been fiddling with the farm but I suspect I am the cause of this disaster ......
Now, I need to remove the treeview feature via settings but I don't seem to be able to navigate to / _settings.
I can access the site via SharePoint designer
I created a replica site albeit unpopulated on my laptop so I can copy untouched master pages if needed.
I just need to get this fixed asap!!!!
Daniel

Hi skcooke
As in Ribbon bar -> admin page button - doh! Done and home site is now accessible - thanks. I will try that next time rather than going directly to the browser and then _settings.aspx. Hmmm will try the treeview again but not when in a hurry
to leave the office lol..

Firefox update 3.6.15 seems to have broken all addons

Since I update to the most recent firefox (3.6.15), all my addons are broken. In the addon tab, they say that they're enabled, but I can't click on the preferences buttons of any of them. Some of them display a green exclamation point, but the ones that don't are still broken. At the top of the addons tab, it says "Restart Firefox to complete your changes" but if I restart, it still says that and it didn't update them.
I've tried updating several of them manually, but they don't update and they don't work. The addons don't appear anywhere in my browser at all; for instance if it's a toolbar, there's no toolbar and no option to get the toolbar when I right click. If it's a button on my main bar, it's gone, and when I go to "customize" the button is still not available.
I've googled this a bunch and am not seeing anyone with my problem.

You might want to add more details in "Computer Model Information" lines.
Is there any source of interference nearby?
The Mac Pro - does it run on a dedicated line / circuit? UPS and/or line conditioner? It shouldn't be putting a real tax on the circuit, unless it is shared with a lot of equipment. They've been known to push the limits for some.
I've seen more than a couple threads reporting problems with ViewSonic (gladly my LCD VGA is older and seems safe).
Are they running off X1900 Radeon?
Sometimes a system ships and even DIMMs can be loosened, maybe video card needs to be reseated?
Hopefully it is just a loose cable somewhere.

KT6 Delta - Core Centre seems to have broken it!

My spec is as follows
KT6 Delta motherboard
AMD Athlon XP2600+
Crucial DDR400 3200 512MB Ram
160GB SATA hard drive
Radeon 9700PRO
Windows XP Home
The machine has been running absolutely fine for months until I foolishly decided to press the auto button in core centre for optimising clocks etc.
This resulted in the machine crashing followed by booting failure just after the Windows splash screen comes up.
The machine will boot with another IDE disk - but after installation of XP the mouse fails to operate???
As soon as the SATA disk is reconnected and configured as a non boot device, the same boot failure happens again.
I have also tried resetting the CMOS to no effect.
Any suggestions would be gratefully received.

I had that problem due to my 9800PRO.Dont know why,but a fresh format needs to be done all underclocked and with a old cheap video card installed.After you load winxp and get everything working,load VIA drivers then put the ATI card in,load its drivers and you should be good to go.I did this on 2 machines so far with no problems.Don't know what it is about ATI and a fresh install,but it makes windows xp do weird stuff.I also found that setting the FSB and uping the ram to the correct MHZ also causes winxp problems when doing the install.That is why I leave it "ALL" underclocked until I get it loaded(win xp)then the VIA drivers next before installing the ATI card and it's drivers.
You also said the mouse fails to operate.When I do a fresh install,I have to use the ps2 mouse adapter instead of the USB or the mouse will fail.
I dont know if anything I said will help you or not,but I had spent hours and hours trying to figure out how to load up everything with my combo the correct way.FWIW,I had always had a problem with getting my ram to 400mhz setting with my combo.Tried BIOS flash,reformat,fresh install's of all drivers ect......After using the following procedure above,I could change the ram to the 400mhz where it needed to be and it was all because of an improper loading procedure that I could not find posted anywheres.
Good Luck

10.68 seems to have broken everything! Any clues

Similar Messages

Maybe you are looking for