10.8.4 log-in issues (can't log-in)

I just updated my MBpro to 10.8.4.
I'm lucky I have another computer I can use to write this from.
Right now I CANNOT LOG IN. I'm presented with the log-in screen and when I select my user (I am the only user) and enter my password - screen goes white - gives me a spinning gear - then black and back to the log-in screen.
I know it accepts the password because it doesn't do the little shake you get when you enter a password incorrectly.
I also cannot get in from the guest side either.
I feel like I can spend the next hour trying to log in and get nowhere...
thanks!

#6 Reset User Permissions
..Step by Step to fix your Mac

Similar Messages

No goods issue can be posted- error in STO

Dear Experts,
I am trying to post GI for an outbound delivery in VL02N.
This delivery was created when I did Goods Issue in MB1B using Mtype : 352 for a Stock Transfer Purchase Order
Kindly note that my Storage Location is WM+HU Managed. I confirmed TO aslo.
While I am trying to do PGI for outbound delivery in VL02N, I am encountered with the error " For item 00010 of purch. order 4500000901, no goods issue can be posted ---   Message no. M7152"*
I am using a PO type for Stcok Transfer and also Item Category is U in PO Line
Kindly help me.
Regards,
Shetty

Hi Shetty,
Can you please review the notes as a possible solution for your issue:
14912 MB1B FM: M7152 No goods issue possible
352735     MIGO for Stock in transfer
Please check following information whether they explain your system
behaviour:
- The document 'UB', with item type 'U', is used just for stock
transfer order within the same company.
- On SD side, the following document types can be used:
NL      Replenishment delivery (without billing document)
          corresponding dummy Sales order DL/NLN(item cat.)/NN(sch.line
NLCC    Cross-company-code replenishment delivery (with bil.document)
          corresponding dummy Sales order: DL/NLC(item cat.)/NC(sch.line
- On MM side
UB Stock transport ord., with "U" item category
NB Standard PO, with "blank" item category
641/647 for STO              assigned to SD schedule line cat NN
643/645 for cross-company    assigned to SD schedule line cat NC
In the standard system, the delivery type NL is used for inter-plant
stock transfer without billing document. For such transfer with
carried out with billing documents, the delivery type NLCC is used.
If you choose 'UB', this means that a stock transfer is to take place
without a billing document. Choose 'NB' if a purchase order involving
delivery and billing document is to be issued.
A combination of delivery type NLCC with purchase order type UB
would not be valid.
In Purchasing,if you create a PO in ME21N where supplying plant and
receiving plant belong to one company code the system will us UB.
If you create a PO where the 2 plants belong to separate company codes
the doc type NB is used.
Best Regards,
Arminda Jack

I have purchased a mac in 2008 but now im facing the battery issue can u people get me the battery

i have purchased a mac in 2008 but now im facing the battery issue can u people get me the battery. Two days back i also purchased a charger from ur apple authorised service centre and even though im not able to use my mac without power once i remove the charger from the power automatically it will switch off
kindly help me ???

You may find a battery for your Macbook here:
http://eshop.macsales.com/shop/Apple/Laptop/Batteries
Ciao.

HT1420 I can not deauthorise my computer . Itunes store issue " Can not deauthorise " I think i chose some wrong items . Please help me !

I can not deauthorise my computer . Itunes store issue " Can not deauthorise " I think i chose some wrong items . Please help me !

click on the store tab on the top left of iTunes. Scroll to where it says "Authorize this computer...". Click on that and enter your apple id and password then click authorize. The reason iTunes says that your computer needs to be authorized is because it is to be sure that iTunes knows can trust your new computer

MOVED: Power of the Press - Neo4 Bios Issue - Can Anyone Test This?

This topic has been moved to Overclockers & Modding Corner.
Power of the Press - Neo4 Bios Issue - Can Anyone Test This?

This topic has been moved to Overclockers & Modding Corner.
Power of the Press - Neo4 Bios Issue - Can Anyone Test This?

No goods issue can be posted for Stock Trasnport Order

Hi,
I am in MB1B transaction, 35 movmt type (BP01 plant) and want to psot the stock to stock in transit to another plant (BP02). STO was created in BP02 plant and Order DS was in BP01 plant.
Now, i am getting error that no goods issue can be posted for Stock Transport Order.

Hi,
It is not creating a delivery thru VL10b. What u meant was create delivery and then do PGI. It will put that stock in transit.Isn't it?? But that is not happening.
Also, MIGO doesn't have movement type 351 E.
Please provide further queries.
Regards,
Thomas

My macbook pro 2010 extremely noisy and a warning flashed on the screen about a power or battery issue- can you help please?

My macbook pro 2010 has started getting extremely noisy in the last few months and I had a strange warning flash up on the screen a month or so ago about a power or battery issue… can you help please?

Calibrating a 2010 MBP is not required. All it will achieve is putting an unnecessary cycle on it and shortening its life:
http://support.apple.com/kb/ht1490
You may try a SMC reset:
http://support.apple.com/kb/HT3964
Open System Information>Power and post the following from your MBP:
(Make certain that the charger is connected)
Ciao.

Windows Dev to LINUX UAT deployment issue - can't log on.

Hi All,
I've recently deployed my dev dashboard/webcat to our UAT server ( for the first time ) along with changing the instanceconfig.xml to point to the new webcat directory. when I log in ( as Administrator ), I get the following error on the web page:
Unable to Log In
Invalid Handle Of 'PN3saw13security_impl5GroupE' Exception
Error Details
Error Codes: Q4NU7XSN
The sawlog0.log file contains the following:
Type: Error
Severity: 30
Time: Wed Mar 17 14:04:41 2010
File: project/webbedrock/handle.cpp Line: 21
Properties: ThreadID-4066503568
Location:
saw.security.securityimpl.getPermissions
saw.subsystem.security.checkAuthenticationImpl
saw.threadPool
saw.threads
Invalid Handle Of 'PN3saw13security_impl5GroupE' Exception
Can anyone advise on what the problem is? I wondered whether it was a LINUX permissions issue, so tried a chmod -R 777 on the webcat directory.
Thanks in advance

For anyone interested, the problem, now resolved, was in the transfer of the webcat directory.
In the end I ZIPped the webcat directory, transferred the ZIP, then unzipped on the destination server, not copying the web/catalog directory as a series of sub files/folders.

OD issues - can't log in once bound

I am experiencing some issues with OD in Leopard Server and Client. Specifically:
- When asked for authentication during binding, the Directory Utility on the client says "attempting to bind" and then stops, leaving no error message but also not binding the client. When disabling authentication for binding, the computer binds.
- User accounts are configured to require a user to change their password upon logging in the first time. The client clearly connects to the server, authenticates a password against said server, and then prompts me to change the password. However, I cannot set a new password.
- When creating user accounts after disbling the change password on first login feature, I cannot get the user accounts to log in to the workstation. The log files on the server indicate that authentication is occuring against the OD database, and if I enter the wrong password it generates that error on the server. But the local client will still have a shaking login box.
Services configured on the server are AFP, DHCP, DNS and Open Directory.
This is the first time I've ever set up a domain controller so I'm a bit stuck.

Based on these symptoms:
+...the regular user takes around 1 minute for the login to fail+
+...the local client will still have a shaking login box+
I don't think that you have a home directory problem. Even if you didn't specify a home attribute for the user account, your error or situation would be different: Authentication and loginwindow authorization would succeed, but you'd see an error shortly after that. The error would usually say something like "the home for so-in-so is on an AFP or SMB server and cannot be found." I've also seen the login continue to the Finder (Tiger systems only) where / may be listed as the user's home (without read/write permission for the user, typically).
Instead, I think you have an authentication problem; the shaking login window indicates that authorization failed entirely, so the problem has to be authentication. Specifically, your situation is probably related to a problem with the SASL (Password Server) database or Kerberos configuration of the server.
Check Server Admin to verify that all Open Directory processes are running properly: You need LDAP, SASL (Password Server), and (optionally) Kerberos. If you don't want Kerberos, be sure to explicitly destroy the KDC and cleanup properly (directions below).
As a last resort, you may want to revert your server to Standalone and re-promote to OD Master. Unfortunately, if you've changed your server's hostname or primary IP address, this may be the case. In my experience, the changeip command does a good job of updating mount records and home directory attributes for user accounts, but it does not always correctly update Kerberos information associated with the LDAP domain. In other words, the OD Master may still think that the KDC for your realm is at the previous IP address or DNS hostname.
*Procedure: Take Down Kerberos, but Keep Open Directory Master*
Use this whenever you're joining your Open Directory Master system to another directory domain (such as Active Directory), and you want the server to be a member of the other directory server's (domain controller's) Kerberos realm. You can also use this procedure if you simply don't want Kerberos.
1. Use sso_util to "de-Kerberize" services and to destroy the Kerberos realm, like this:
*sudo sso_util remove -k -a <directory admin> -p <diradmin's password> -r <KERBEROS.REALM>*
2. Destroy any items that were left over from the KDC's configuration - do this manually:
a. Su to root, then navigate to /var/db/krb5kdc and list the contents of the folder with *ls -al*. Delete any files whose name does NOT contain LKDC.
b. Use Workgroup Manager to destroy any Kerberos entries in /Local/Default/Config in the server's local directory domain.
c. Destroy the files created by kerberosautoconfig: sudo rm /Library/Preferences/edu.mit.Kerberos*
For more detail, please see my response to another question: http://discussions.apple.com/thread.jspa?messageID=6294175&#6294175
*Procedure: Demote Server to Standalone and then re-promote to Open Directory Master*
Use this when all else fails. All users, groups, computers and computer groups in the shared LDAP domain will be destroyed; all user password information in Password Server and Kerberos will also be lost. You can back up your users, groups, and computers via Workgroup Manager's Export command; this will not, however, preserve the users' passwords.
1. Use Server Admin to change the role of the Server from Open Directory Master to Standalone.
2. Follow the Kerberos tear-down instructions (above). For some reason, Server Admin doesn't fully destroy the Open Directory Kerberos realm, so this is necessary.
3. Verify that the server's hostname and primary IP address are set. Double-check your DNS settings for an A record and PTR (reverse lookup) record for your server.
4. Use Server Admin to re-promote the Server to Open Directory Master.
--Gerrit

Logging Issue, Can't Disable - Yahoo Messenger

Hello everyone, I recently had a problem with Yahoo Messenger and contacted Yahoo about it and was told to send them a Log of the program, by enabling the logging feature via Terminal with the following steps:
+"To help me investigate the issue, I'll need you to send me a diagnostic+
+log file. Here's how:+
+1. Enable diagnostic logging:+
+a. Quit Yahoo! Messenger for Mac.+
+b. Launch the "Terminal" program located in Applications -> Utilities.+
+c. Copy and paste each of the following commands into the Terminal.+
+Press <Return> after pasting each command.+
+defaults write com.yahoo.messenger3 EnableRMPLogging -bool YES+
+defaults write com.yahoo.messenger3 LogLevel all+
+defaults write com.yahoo.messenger3 LogPath ~/Desktop/ym.log+
+2. Now that diagnostic logging has been enabled, try to repeat the issue+
+you're experiencing with Yahoo! Messenger.+
+3. Disable diagnostic logging:+
+a. Quit Yahoo! Messenger for Mac.+
+b. Launch the "Terminal" program located in Applications -> Utilities.+
+c. Copy and paste each of the following commands into the Terminal.+
+Press <Return> after pasting each command.+
+defaults delete com.yahoo.messenger3 LogLevel+
+defaults write com.yahoo.messenger3 EnableRMPLogging -bool NO"+
Now, after completing the last 2 terminal steps just shown above and deleting the original "ym.log" file on my desktop, every time I open up Yahoo Messenger, a blank "ym.log" now appears on my desktop.
Anyone know what step is missing to turn this log feature off in Terminal?
Please help.

Well, after some extensive research and digging through old forum posts on several Mac forums, I found out that I was modifying the Preferences file under Users for Yahoo Messenger.
Basically just deleted the file, restarted and the command was no longer active and the logging no longer active.
Hope this helps others who may encounter the same problem.

DNS Issues - Can ping server name and IPs but not FQDNs.

Hi All,
Hopefully some one can help me here, I am having an issue where one of my domain attached servers cannot ping any FQDNs in the environment but it can ping the host names and the IPs and look up the host names from a reverse look up.
We have done the following troubleshooting:
Flushed and registered DNS cache.
Restarted the DNS client and net logon services on the effected server
Preformed standard checks and commands such as:
Checked the event logs and found there were warnings for DNS registration.
Compared the DNS settings in the network adapters across the rest of the servers in the environment and found that they were all the same. DNS Suffixes are added in the correct order and are set to register.
Pinging FQDNs which is not giving any results.
Tracert FQDNs which is also not giving any results.
Nslookup which is querying the DNS server directly and giving results as expected
Ran the command which reported successful: dcdiag /test:registerindns /dnsdomain:sub.domain.net /v
Checked and updated the permissions on DNS for the affected server to give the server full control of its own DNS entry.
Replaced the DNS Client service DLL with one from a server that is working as expected.
Also worth noting is that the affected server (as well as every other server in the environment) has 2 NICs, one that communicates with DNS and AD and the other does not have any DNS IPs set.
Not this is not the first time this happened, a reboot fixed the issue before but it seems to be a reoccurring problem now.
If any one can shed some light on this issue I would be grateful.
Regards,
Steve.

Hi Steve,
First, we should confirm if this issue is caused by DNS.
When you ping the FQDN, does the server show the correct corresponding IP address?
If no, there should be some error messages. If it is possible, please post the screenshot of this issue.
To check the process about how does server resolve the FQDN, please follow the steps below:
clear local DNS cache with command ipconfig /flushdns
perform the network capture
ping the specified FQDN
Check the DNS traffic
To download Network Monitor, please click the link below:
http://www.microsoft.com/en-hk/download/details.aspx?id=4865
Besides, have you tried to update the NIC driver to the latest version?
Best Regards.
Steven Lee Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Shared Service Issue - Can't see Projects!

Hi All,
i've an issue on a Hyperion 9.3.3. environment distributed on 3 server.
This architecture was installed since 2009 and it was fine until three days ago.
The first symptom was an error in the essbase.log: Essbase wasn't able to find Admin user in shared services.
After a reboot in shared services, we can't see any projects (we have Analytics Server, Interactive Reporting, Planning, Business Rules).
We tried to recover LDAP data but it didn't make any changes.
The system is working fine, but now we can't provision any new user or modify the existing ones.
All suggestions are welcome!

did you change any SSL-certificate recently?
did you start HSS before the other applications?
can HSS server:port be reached from all the servers where the other applications are running?
Did you try to open HSS in a different browser -(version). (little change its a client problem but you can always check it).
Did you change the adminuser password?
more?
Detlev

Epson Artisan 810 issues - can scan and communicate but not print!

I just purchased a new Macbook Pro (13") - my first ever Mac - and am trying to get it to print with my Epson Artisan 810. Like many others I am having problems but none of the posted solutions work for me.
I installed it fresh initially with the drivers from the Epson website, I selected the Bonjour option, I was even able to download whatever update was out there through the Software Update feature, but still the same issue. The printer scans w/o a problem, it can tell me the ink levels and access the maintenance page w/o problems, but cannot print.
Whenever I print SOME message must make it to the printer because as soon as I hit print the printer starts making noise as if it is going to load paper and print, but then almost immediately it cancels the print. The printer log ALWAYS give the same error no matter what document or program I try to print from:
Error: /Library/Printers/EPSON/InkjetPrinter2/Filter/rastertoescpll.app/Contents/MacOS /rastertoescpll failed
I have tried uninstalling and reinstalling the printer over and over and I keep getting this same error and immediate print job cancellation. What the heck is the problem here?

John, I deleted the printer and deleted those folders and reinstalled the printer using the printer menu. When I tried the apple software update it said my software was up to date and didn't offer an option to get updated print drivers. I tried printing again and the same thing happened.
Syd,
I am trying to print from the Macbook to the Artisan entirely over a wireless network. The Macbook has not been plugged directly into the printer or to the router at any point in this. I did try what you suggested, resetting the printing system, and as earlier it did not offer any software updates when I looked for one. I tried printing again and the same result.
I dug around some more directories and found some more files with the epson name in there and deleted those and then attempted to reinstall using the printer setup page, and then again tried a software update and again it didn't find any new drivers, and of course the same printing error occurred again.
It sure appears that the MacOS is holding onto drivers somewhere that I cannot discover because when I reinstall the printer it takes it all of 3-4 seconds to install, and when I try to do the software update it is not finding any new drivers anywhere.
Syd, I agree that there seems to be something specifically corrupted about the printer driver itself, however, but is there another way to remove drivers?
Should I try uninstalling everything and attempting a USB installation to see if prints that way?

Used z61m has some serious issues,can u help?

most times works fine,can spend hours on it with no issues.but here are all the things it does.1)sometimes when you cut it on the pointer wont move,and i have to cut it off and back on(sometimes numerous) til works.2)sometimes you can not type in at all in search windows,or email,again have to cut off and on.3)sometimes when writing,say an email,it will just start your line in the middle of a paragraph youve already written.4)sometimes when writing the words actually come out completely backwards.5)if you attach an external mouse and its plugged in when you cut computer on,it beeps at you and will not let you cut it on til you unplug.6)and this is apparently the most serious,when logging off or simply cutting computer off the dreaded "blue screen" appears.i have no idea how to do what it says to correct.it starts" a stop process has been detected and windows has been shut down to protect computer,etc,etc.so is this to much?should i go out and shoot it.

i don't know whether you still have the recovery partition active.
So let's give it a try.
Reboot your computer, then press the thinkvantage button (the blue button next to the volume button on the keyboard).
If you have the partition, then it will take you into a new menu, where you can select restore to factory condition.
And if you can do that, then it is great, just follow the prompt.
Regards,
Jin Li
May this year, be the year of 'DO'!
I am a volunteer, and not a paid staff of Lenovo or Microsoft

HotSynch issues: can't change any settings in User Accounts, can't rename or delete, can't sync!

Hello, I am running Windows XP Pro Version 5.1.2600. My wife and I both have Palm Treo 700p smartphones running Palm OS 5.2H.
Her phone has been having continual issues with some third-party software. Each time we would attempt to sync her phone after installation we would get the same error message:
HotSync Exchange synchronization failed
HotSync Error: Unknown error. (FE00)
We have tried to contact the software developer for the third-party application with no luck. They simply insist that there is nothing wrong with their software. Mind you, the phone would always sync with no issues before we installed the third-party software, but that's neither here nor there. Point being her phone would not sync no matter what I tried.
I searched the troubleshooting articles for HotSync issues and found that the only solution that might help would be to update our Palm Desktop from version 4.2 to 6.2. After installing the new Palm Desktop I was able to sync my 700p. However, when I attempted to sync my wife's 700p it still did not work. When I tried to access the HotSync log on the desktop it would only show the log for my phone. Her name would show up in the list of users, but once I tried to select it my name would appear in the window. When I attempt to open the "User Accounts" window in the HotSync Manager the application freezes and I must shut it down. I am unable to delete or rename the User accounts.
Now we are stuck not being able to sync her phone and not being able to fix the issue. She has a lot of files on her phone which she spent a lot of time working on, hundreds of hours, to get them where she needs them. Our concern is that in the process of fixing the HotSync issue she'll lose her work. We need a solution. Any assistance you can offer would be greatly appreciated.
Thanks,
Sam
Post relates to: Treo 700p (Verizon)
Post relates to: Treo 700p (Verizon)

Versamail is a email application on the device. As for the backup folder you may have renamed it follow these steps (You may not need to hard reset the device. You can skip that part)
To fix this what we need to do is hard reset your device. The instructions to do that is here http://kb.palm.com/wps/portal/kb/common/article/887_en.html this tells you how to do all types of resets. Also, what we need to do is rename your backup folder. What this folder is, it hold all your programs from the last time you synced your PC. On your computer go here
Palm Desktop 4.2 and below
My Computer--> C drive --> Program files --> Palm/PalmOne--> your hotsync username
Palm Desktop 6.2.2
My Documents/Documents --> Palm OS Desktop --> your hotsync username
Right click on your backup folder and rename it to "backupOld". Resync your device to the same user name and you will get all your contacts, calendar, tasks, and memos.
You can install the programs again but make sure they are compatible with the device. Also try one program again and wait 24 hours to see if the same thing happens again. This way you know what program is causing the issue.

10.8.4 log-in issues (can't log-in)

Similar Messages

Maybe you are looking for