10g db control not working

Hi
In 10g database my db control not working.i m also recreate it but same result using these commands.
emca -repos create
emca -config dbcontrol db
Thanks

so what is returning this: `emctl status dbconsole` ?
if it tells that DB Control is running so what you've got when You are trying tu run db console (http://host:port/em/ ) ?
if it's not runnig type 'emctl START dbconsole' and try again
anyway, if something doesn't work that there have to be some errors :)
when you will not get any errors from above look for them here:
$ORACLE_HOME/HostName_InstanceName/sysman/log

Similar Messages

SSRS 2008 R2 Calendar Control not working and report not refreshing on pressing enter in Chrome.

SSRS 2008 R2 Calendar Control not working and report not refreshing on pressing enter in Chrome.

SSRS reports are always best viewed in IE and the report result what you see in IE always will not be same and consistent in thirdy party browswers.
So consider using IE as workaround.
Also please refer:
https://social.msdn.microsoft.com/Forums/vstudio/en-US/2188de10-cff9-4e24-b14f-da5121f1c4a4/ssrs-calender-control-not-visible-in-chorme-on-server?forum=sqlreportingservices
Workaround here:
http://www.rajbandi.net/Fixing-SSRS-Report-Viewer-control-date-picker-in-Google-chrome/
-Vaibhav Chaudhari

JDBC control not work after upgrade application from workshop 8.1 to 9.2.3

Hi,
We upgraded application from workshop 8.1 to 9.2.3. After that, the JDBC control not work any more. We got the following exception:
java.sql.SQLException: The transaction is no longer active - status: 'Committed'. No further JDBC access is allowed within this transaction.
at weblogic.jdbc.wrapper.JTSConnection.checkIfRolledBack(JTSConnection.java:192)
at weblogic.jdbc.wrapper.JTSConnection.checkConnection(JTSConnection.java:202)
at weblogic.jdbc.wrapper.Connection.preInvocationHandler(Connection.java:87)
at weblogic.jdbc.wrapper.Connection.getMetaData(Connection.java:435)
at org.apache.beehive.controls.system.jdbc.parser.SqlStatement.createPreparedStatement(SqlStatement.java:128)
at org.apache.beehive.controls.system.jdbc.JdbcControlImpl.execPreparedStatement(JdbcControlImpl.java:272)
at com.bea.wlw.runtime.core.control.internal.JdbcControlImpl.invoke(JdbcControlImpl.java:136)
at controls.SecurityBean.getUpdateDocPermission(SecurityBean.java:598)
at security.SecurityManagerImpl.getUpdateDocPermission(SecurityManagerImpl.java:110)
at security.SecurityManagerBean.getUpdateDocPermission(SecurityManagerBean.java:509)
The control that throw the exception has "transactionattribute" annotation added automatically by upgrade wizard during upgrading. Related classed are as follows:
@ControlInterface()
public interface SecurityManager
@TransactionAttribute(TransactionAttributeType.REQUIRED)
boolean getUpdateDocPermission(java.lang.String userId);
@ControlImplementation()
public class SecurityManagerImpl implements SecurityManager, Serializable
* @common:control
@org.apache.beehive.controls.api.bean.Control()
private controls.Security security;
static final long serialVersionUID = 1L;
* @common:operation
public boolean getUpdateDocPermission(String userId)
if ( security.getUpdateDocPermission(userId) > 0) {
return true;
else
return false;
@ControlExtension()
@JdbcControl.ConnectionDataSource(jndiName = "EventDesk")
public interface Security extends JdbcControl
static final long serialVersionUID = 1L;
* @jc:sql statement="select r.updateDoc from document_user u ,document_role r where u.login={userId} and u.roleId=r.roleId;"
@JdbcControl.SQL(statement = "select r.updateDoc from document_user u ,document_role r where u.login={userId} and u.roleId=r.roleId;")
int getUpdateDocPermission(String userId);
Thanks for your help

Hi. The issue is a level or two above JDBC. I suggest
opening an official support case. It's probably a
WLW issue.
Joe

Sound control not working on my blue tooth keyboard

sound control not working with my bluetooth keyboard

UAVPilot,
Thank you for the information. I do show that the device and car are capable of this function. I do not show any reason you should not be hearing the notifications. One thing you will want to check is that the sound for both your notifications and media are turned up. Also you can look into going into Settings>Apps>S voice Drive Mode> Clear Cache. This should clear any possible bugs in the application. Please keep us updated on this and we can check on other options.
Thank you,
TonyG_VZW
Follow us on Twitter @VZWSupport

Oracle 10g database homepage not working?

Oracle 10g database homepage not working?
Hi just i installed oracle database 10g express edition but after the restart the oracle database homepage wont open http://127.0.0.1:8080/apex that link always telling cannot display...
here i have posted lsnrctl status
pls help
thanks in advance
LSNRCTL> status
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY…
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for 32-bit Windows: Version 10.2.0.1.0 - Produ
ction
Start Date 25-SEP-2010 17:52:11
Uptime 0 days 1 hr. 28 min. 24 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Default Service XE
Listener Parameter File C:\oraclexe\app\oracle\product\10.2.0\se…
dmin\listener.ora
Listener Log File C:\oraclexe\app\oracle\product\10.2.0\se…
og\listener.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIP…
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOS…
Services Summary...
Service "CLRExtProc" has 1 instance(s).
Instance "CLRExtProc", status UNKNOWN, has 1 handler(s) for this service...
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
The command completed successfully

I had a problem of accessing Oracle 10g database homepage. After a couple of days of research and discussions with coworker we found a solution.
Here is the solution:
1. Find out your default browser.
2. Configure your default web browser to connect to the Oracle Database XE Database Home Page as stated
here:
http://download.oracle.com/docs/cd/B25329_01/doc/install.102/b25143/toc.htm#CIHHJEHF
If this does not help de-install Oracle XE and reinstall following the instruction. During re-installation find out your default browser and configure it as instructed.
I suspect when the default web browser changes the Oracle 10g XE Database Home Page stops working.
Good luck

Lower volume button control not working help?

Lower volume button control not working help?

If you only restored from backup, restore to factory defaults/new iPod. If you then still have the problem it is likely a hardware problem and an appointment at the Genius Bar of an Apple store is in order.

Beats audio controls not working

Using my beats headphones this morning with my MacBook Air and iTunes. Everything is up to date. Although today now the audio controls on the cord won't work. Normally I can pause iTunes or control the volume. I do this multiple times a day but no go today.
Is this another 10.10.2 bug? Illustrator 2014 CC no longer works properly with my external monitor. I'm getting frustrated with all these bugs.
Also, in my 'About This Mac' info window, it shows my OS as "135122" instead of "Mac OS X" - I'm sure that's not normal.
Any thoughts, anyone?

I did a reboot and repaired permissions, which solved the beats headphones controls not working.
Still concerned about the Mac OS version display though. Curious to know if anyone else has that as well.

The web controls not work(windows phone)

Hi
I have a web app.after I make an animation in this page(like a transition page in loading page), the web controls not work more.
the site is shown but any thing not work like scrolling or tap in links

Can you please explain more clearly what you are doing and what you need help with? What is your overall scenario, what exactly is your code doing, what behaviour do you expect and how is that different from what you actually see?

Backlight control not working on new 13" macbook air

Backlight control not working on new 13" macbook air

Contact Apple's Express Lane, and let them deal with it, since it's a new machine.

Oracle Forms 10G(tabbed canvasses not working the same as in Forms 6i)

Hi everyone,
I have a form which gets called from another form through a list of value. The called form(second form) has a group of tabbed canvases which get displayed depending on the parameters passed from the first form.
The Form is working prefectly fine in Forms 6i but when I converted the same form in to forms 10G it does not seem to work the same way. The tabbed canvasses are not getting displayed. I am manually having to press the execute query to get data displayed in the tabbed canvasses. I checked the parameters that are being passed and they are the same as that in Forms 6i.
Please let me know where my 10G Form is going wrong. Appreciate your help, please send me an email on [email protected]
Thanks

duplicate
Re: Oracle Forms 10G not working as Oracle Forms 6i

BT Vision Box and Remote Control not working prope...

Hi,
Can anybody help me please?
I have a black BT Vision Box. The remote control had increasingly been sticking so tonight I just turned the power off tonight, left it off for 20 seconds and turned it back on.
It seemed to turn back on and reboot itself normally, it took the amount of time it normally does on a couple of occasions when it froze a few months back. However since I rebooted it approximately 3 hours ago it has been turning itself off and rebooting itself every 10 minutes or so. On one occasion when I turned it off on the front of the machine and left it for a few minutes, it turned itself on and started rebooting itself again.
The remote control is worse than when it was sticking, now there is a delay of up to 30 seconds after I press a button. Sometimes it does not work at all, when that happens it just becomes stuck and eventually reboots itself.
So far I have tried turning it off and on again, I have also tried rebooting the internet connection (which is working fine). I have tried pressing the off button on the actual box for 10 seconds and resetting it that way. I have put new batteries in the remote. Nothing has worked. If anyone can help me that would be great.
Solved!
Go to Solution.

Hi,
Unfortunately I can't get that far now.
I turned all TV related systems off last night in an effort to see if it would work properly today.
I came home from work and turned everything on. The system boots itself up until it gets to a grey screen that says "Nearly there..." with the BT logo in the bottom right corner. It stays like that for approximately one minute. Then it turns itself off and starts rebooting itself again.
I have tried pressing the on/off button on the front of the box and holding it in for 10 secs or so until the box turns itself off and reboots but the effect is still the same as above.
Do you have any other suggestions pleaase, aside from throwing it in the bin?

DV9700 Volume Controls not working after motherboard replacement

I have a HP Pavilion DV9702ea, which I've had for just over two years now. It worked absolutely fine for me in every way since I got it until about one month ago when I installed some software that required me to restart Windows. The laptop shutdown but did not restart. I tried to switch it back on but it would not work - when I pressed the power button the power light would blink for perhaps half a second but that was it. After some internet searching I ascertained that this is a symptom of a common problem with these laptops and that it suggested that the GPU had failed, which meant I needed a new laptop.
So I ordered a new laptop using the model number shown on the sticker near the RAM ports. It arrived and I installed it. Now my laptop is fully working again - all except for the volume controls. On the control panel above the keyboard, all of the QuickPlay keys (Q, DVD, previous, Play/Pause, next and stop) are illuminated but the volume control keys (mute, - and +) are not. I have Windows Vista installed with the correct audio driver and it does not respond to me pressing these keys, so it's not just that they're not lit up, they're not working at all.
I've tried everything that I can think of to fix this - as far as I'm concerned it should not be a software issue, because these keys are supposed to be illuminated from power-on, so even without a hard drive or an operating system installed these keys should be lit up. Nevertheless I've tried making sure all the audio, QuickPlay, QuickLaunch and QuickTouch drivers are up to date and have tried alternate drivers for all of them. I've checked the cable leading from the motherboard to the controls - it appears to be intact, but I even ordered a replacement just in case and that has made no difference. I've extensively Googled the problem and the most promising fix that I could find (that is repeated on these forums several times) was to power off the laptop, remove the mains adapter and battery, hold the power button down for 30 seconds to discharge any static and then power on again. I've tried that a few times and it has not fixed the problem in my case.
So I'm at a loss now. My last resort will be to return the motherboard for a replacement, but that will obviously be a lot of hassle for me as I'll have to strip down the laptop to remove it and I'll be without a working laptop for a day or so. And then, if it's not a motherboard fault, I'll have put a lot of effort into not getting anywhere. So is there anything else I should try?
Any help would be much appreciated.

I have this issue before, in my case, its ribbon cable issue. dv9000 have two ribbon cables the one that have broken is the long one, (connect mobo to switch panel). However there is other possibility that the switch panel also broken.
Try buying the ribbon cable first, it is much cheaper compared to switch panel.
Pavilion DV2922TX, XP-SP3 32bit, Intel T5750 2.0Ghz, Nvidia Geforce 8400M GS with 128MB, 4GB 667 DDR2, 250GB HDD

Volume control not working after I plug in speakers or headphones

When I turn on my 13 inch with Mac OS X version 10.6.8 or if I restart it, my volume works perfectly. However, whenever I plug in earphones or speakers the volume will be 'stuck' on the loudest it can go. When I use the volume controls on my keyboard or the slider at the top menu bar, it will make the clicking sound as if the volume is going up or down and will show the white speaker with the volume being adjusted but the volume will stay on the loudest possible setting. Even after I unplug my speakers/headphones the volume will continue to not work. There is no red light coming from the headphone jack and since it works upon startup, I'm inclined to think it's a software issue and not a hardware issue but then again, I don't know the first thing about computers. Since this has started, I've looked online for similar problems or suggestions but nobody has had this exact same issue, but I did follow the suggestions for similar issues. I repaired the disk (I could only do it for the Macintosh but I am running bootcamp with windows on the other side but I've used it maybe once for a pc only program and have never run the internet on it so I doubt the problem is coming from that side). It repaired a bunch of stuff but it didn't fix my issue. I also reset the PRAM and the NVRAM (I don't know what this does, but someone suggested it so I gave it a shot) and it did nothing. If you have a suggestion for something I can do, please be detailed, or point me to detailed instructions because my computer knowledge is very limited but I'm willing to work to fix this. Thank you!

Make an appointment at the Genius bar at the Apple store.
Ciao.

Oracle 10g Agent is not working in Windows VISTA

Hi
I have installed Oracle 10g Grid Control in VISTA. But the Agent is not getting started.
the trc in the Agent10 G log directory is
2008-04-19 17:29:45 Thread-532 WARN http: snmehl_connect: connect failed to (HP-PC:3872): No connection could be made because the target machine actively refused it.
(error = 10061)
2008-04-19 17:29:45 Thread-532 ERROR main: nmectla_agentctl: Error connecting to https://HP-PC:3872/emd/main/. Returning status code 1
2008-04-19 18:18:22 Thread-5288 WARN http: snmehl_connect: connect failed to (HP-PC:3872): No connection could be made because the target machine actively refused it.
(error = 10061)
2008-04-19 18:18:22 Thread-5288 ERROR main: nmectla_agentctl: Error connecting to https://HP-PC:3872/emd/main/. Returning status code 1
2008-04-19 18:18:23 Thread-7652 ERROR main: nmectl.c: nmectl_validateTZRegion, agentTZoffset =330,and testTZoffset for GMT:0 do not match
2008-04-19 18:18:24 Thread-7652 ERROR main: nmectl.c: nmectl_validateTZRegion, agentTZoffset =330,and testTZoffset for GMT:0 do not match
2008-04-19 18:18:26 Thread-7272 WARN http: snmehl_connect: connect failed to (HP-PC:3872): No connection could be made because the target machine actively refused it.
(error = 10061)
2008-04-19 18:18:26 Thread-7272 ERROR main: nmectla_agentctl: Error connecting to https://HP-PC:3872/emd/main/. Returning status code 1
2008-04-19 18:20:52 Thread-4872 WARN http: snmehl_connect: connect failed to (HP-PC:3872): No connection could be made because the target machine actively refused it.
(error = 10061)
2008-04-19 18:20:52 Thread-4872 ERROR main: nmectla_agentctl: Error connecting to https://HP-PC:3872/emd/main/. Returning status code 1
2008-04-19 18:20:53 Thread-4344 ERROR main: nmectl.c: nmectl_validateTZRegion, agentTZoffset =330,and testTZoffset for GMT:0 do not match
2008-04-19 18:20:54 Thread-4344 ERROR main: nmectl.c: nmectl_validateTZRegion, agentTZoffset =330,and testTZoffset for GMT:0 do not match
2008-04-19 18:20:55 Thread-5604 WARN http: snmehl_connect: connect failed to (HP-PC:3872): No connection could be made because the target machine actively refused it.
(error = 10061)
2008-04-19 18:20:55 Thread-5604 ERROR main: nmectla_agentctl: Error connecting to https://HP-PC:3872/emd/main/. Returning status code 1

This pretty much says it all:
No connection could be made because the target machine actively refused it.What version of Vista?
What version of the agent? ... 10g is not a version number it is a marketing label
Did you check to see if the agent is compatible with your operating system?
My recommendation would be to get a real operating system: Either Oracle Linux or XP.

Re: EJB Control not working with methods that contain arguments

John,
I'm not qualified to answer your EJB control question, but before you
become too disillusioned with page flows I'd like to mention that the
request scoped data form and and the return-to="page" issues you
mentioned have been addressed for the next service pack. We've
introduced the ability to specify a page flow scoped form bean which
lives for the life of the page flow, and we've clarified the return-to
values to include both "currentPage" and "previousPage" which should
clarify the expected behavior.
I hope you give it a try.
Thomas
John Hundley wrote:
Oh well guess you guys gave up on this one. Thats ok, I have utilized a workaround
that forgoes your non working controls just like I have workarounds for your dataforms
that do not maintain their data between pages, your retrun to page that does not
work etc.... At this rate I should have just used struts and JBoss.
"John Hundley" <[email protected]> wrote:
oop's attached the wrong one here is the right one.
"John Hundley" <[email protected]> wrote:
Ok I have attached one of my beans.
"Anurag" <[email protected]> wrote:
John,
For a stateless session bean, the ejbCreate() method is called for
every
individual method call. This is because the bean instance is returned
to the
pool after every method call, it does not hold any state.
I am still surprised about the behaviour you are seeing.
Can you just attach your stateless session bean. You need not sendthe
dependent files, since we only want to sniff the call made to the stateless
EJB method, and are not concerned with the implementation.
Regards,
Anurag
"John Hundley" <[email protected]> wrote in message
news:[email protected]...
Anurag,
I am using the GA release. My control looks identicle toTraderEJBControl.jcx
except of course it is extending a different home and bean interface.The
bean
itself does not exacly match the traderbean but it does look very
similar
to MusicBean.java
in the tutorialsApp. One thing that has me a bit confused is the
fact
the
create()
method is being called every time I make a method call on the control.Shouldn't
the bean only be created once at the first method call and persistfor the
life
of the session?
John
"Anurag" <[email protected]> wrote:
John,
Have you tried running the ejbControl/TraderEJBClient.jws in SamplesApp.
It
does involve calling methods on the stateless EJB TraderEJB through
an
EJB
control, which accept parameters and run fine.
Could you also confirm that you are using the 8.1 GA release, andnot
the
beta.
Regards,
Anurag
"John Hundley" <[email protected]> wrote in message
news:[email protected]...
Raj,
I cannot attach them here. I am not sure how you would test them
anyway
as I
would have to send you my Oracle schema and you would have to
set
up
a
database
instance. There is no way I can do that. If you could please
send
me an
e-mail
I can attach the relevant files in reply and you could take a
look
at them
and
see if you see any obvious problems.
Thanks,
John
"Raj Alagumalai" <[email protected]> wrote:
John,
Can you attach the ejb jar, the jcx and the jws files that you
have
created.
I will test and get back to you.
Thanks
Raj Alagumalai
WebLogic Workshop Support
"John Hundley" <[email protected]> wrote in message
news:[email protected]...
Hi,
I have created an EJB control on a stateless session bean.
For
some
reason when
I attempt to call a method on my control that takes any number
of
arguments I
get a java.lang.IllegalArgumentException yet if I call a method
that
takes
no
arguments everything works fine. I used the debugger to walk
through
the
code
and have discovered that every time I call any method on the
control
the
create()
method gets called, this is exactly where the error is occurring.It is
almost
like the control is trying to pass my method args to the create()
method
instead
of the method I am calling. I have tested all of the methods
in
the
ejb
by manually
coding everything (getInitialContext ejb.create etc) in a .jsp
and
calling
all
of the methods within that .jsp. There they all work fine
so
I
am
pretty
sure
the control is doing something funky. Any ideas as to what
is
going
on
and how
I can fix it?
Thanks,
John

Was this issue ever resolved ? We are running into the same problem.
The last response is "I'm not qualified to answer your EJB control question."
Can this be escalated to someone who can please ?
Regards
Shahriar

10g db control not working

Similar Messages

Maybe you are looking for