10g problem with ports

Hi, I need some help:
I have an application running in an application server (JBoss -4.0.3) in a network. It connects to my 10g db (In other network) through a firewall. I know I have port 1521 open, and can do selects but when I try to make an insert from my application I obtain a connection timed out. I have heard that 10g uses as main connection port 1521 and after renegotiates more ports. Is it true? how can I configure this?
(The same application in developments enviroment (without firewall) works ok)
Ty in advance
FRU

Are you windows? If yes, setting 'USE_SHARED_SOCKETS=TRUE' (control panel ==> SYSTEM) should resolve the port redirection problem. For a detailed description see on metalink:
Port 1521 opened in firewall yet cannot connect to Oracle Server (ORA-12535,TNS-12203)
Note:361284.1
This is an Oracle Net issue, should be independent from the kind of statements. So I'm surprised that 'select' works, but 'insert' does not.
Werner

Similar Messages

HELP!! asa 5505 8.4(5) problem with port forwarding-smtp

Hi I am having a big problem with port forwarding on my asa. I am trying to forward smtp through the asa to my mail server.
my mail server ip is 10.0.0.2 and my outside interface is 80.80.80.80 , the ASA is setup with pppoe (I get internet access no problem and that seems fine)
When I run a trace i get "(ACL-Drop) - flow is deied by configured rule"
below is my config file , any help would be appreciated
Result of the command: "show running-config"
: Saved
ASA Version 8.4(5)
hostname ciscoasa
domain-name domain.local
enable password mXa5sNUu4rCZ.t5y encrypted
passwd 2KFQnbNIdI.2KYOU encrypted
names
interface Ethernet0/0
switchport access vlan 2
interface Ethernet0/1
interface Ethernet0/2
interface Ethernet0/3
interface Ethernet0/4
interface Ethernet0/5
interface Ethernet0/6
interface Ethernet0/7
interface Vlan1
nameif inside
security-level 100
ip address 10.0.0.1 255.255.255.0
interface Vlan2
nameif outside
security-level 0
pppoe client vpdn group ISPDsl
ip address 80.80.80.80 255.255.255.255 pppoe setroute
ftp mode passive
dns server-group DefaultDNS
domain-name domain.local
same-security-traffic permit intra-interface
object network obj_any
subnet 0.0.0.0 0.0.0.0
object network Server_SMTP
host 10.0.0.2
access-list outside_access_in extended permit tcp any object server_SMTP eq smtp
pager lines 24
logging asdm informational
mtu inside 1500
mtu outside 1500
icmp unreachable rate-limit 1 burst-size 1
no asdm history enable
arp timeout 14400
no arp permit-nonconnected
object network obj_any
nat (inside,outside) dynamic interface
object network server_SMTP
nat (inside,outside) static interface service tcp smtp smtp
nat (inside,outside) after-auto source dynamic any interface
access-group outside_access_in in interface outside
timeout xlate 3:00:00
timeout pat-xlate 0:00:30
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
timeout floating-conn 0:00:00
dynamic-access-policy-record DfltAccessPolicy
user-identity default-domain LOCAL
http server enable
http 10.0.0.0 255.255.255.0 inside
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart warmstart
telnet timeout 5
ssh timeout 5
ssh key-exchange group dh-group1-sha1
console timeout 0
vpdn group ISP request dialout pppoe
vpdn group ISP localname [email protected]
vpdn group ISP ppp authentication chap
vpdn username [email protected] password *****
dhcpd auto_config outside
threat-detection basic-threat
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
webvpn
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
message-length maximum client auto
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect rsh
inspect rtsp
inspect sqlnet
inspect skinny
inspect sunrpc
inspect xdmcp
inspect sip
inspect netbios
inspect tftp
inspect ip-options
service-policy global_policy global
prompt hostname context
no call-home reporting anonymous
Cryptochecksum:c5570d7ddffd46c528a76e515e65f366
: end

Hi Jennifer
I have removed that nat line as suggested but still no joy.
here is my current config
Result of the command: "show running-config"
: Saved
ASA Version 8.4(5)
hostname ciscoasa
domain-name domain.local
enable password mXa5sNUu4rCZ.t5y encrypted
passwd 2KFQnbNIdI.2KYOU encrypted
names
interface Ethernet0/0
switchport access vlan 2
interface Ethernet0/1
interface Ethernet0/2
interface Ethernet0/3
interface Ethernet0/4
interface Ethernet0/5
interface Ethernet0/6
interface Ethernet0/7
interface Vlan1
nameif inside
security-level 100
ip address 10.0.0.1 255.255.255.0
interface Vlan2
nameif outside
security-level 0
pppoe client vpdn group ISP
ip address 80.80.80.80 255.255.255.255 pppoe setroute
ftp mode passive
dns server-group DefaultDNS
domain-name domain.local
same-security-traffic permit intra-interface
object network obj_any
subnet 0.0.0.0 0.0.0.0
object network Server_Mail
host 10.0.0.2
access-list outside_access_in extended permit tcp any object Server_Mail eq smtp
pager lines 24
logging asdm informational
mtu inside 1500
mtu outside 1500
icmp unreachable rate-limit 1 burst-size 1
no asdm history enable
arp timeout 14400
no arp permit-nonconnected
object network obj_any
nat (inside,outside) dynamic interface
object network Server_Mail
nat (inside,outside) static interface service tcp smtp smtp
access-group outside_access_in in interface outside
timeout xlate 3:00:00
timeout pat-xlate 0:00:30
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
timeout floating-conn 0:00:00
dynamic-access-policy-record DfltAccessPolicy
user-identity default-domain LOCAL
http server enable
http 10.0.0.0 255.255.255.0 inside
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart warmstart
telnet timeout 5
ssh timeout 5
ssh key-exchange group dh-group1-sha1
console timeout 0
vpdn group ISP request dialout pppoe
vpdn group ISP localname [email protected]
vpdn group ISP ppp authentication chap
vpdn username [email protected] password *****
dhcpd auto_config outside
threat-detection basic-threat
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
webvpn
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
message-length maximum client auto
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect rsh
inspect rtsp
inspect esmtp
inspect sqlnet
inspect skinny
inspect sunrpc
inspect xdmcp
inspect sip
inspect netbios
inspect tftp
inspect ip-options
service-policy global_policy global
prompt hostname context
no call-home reporting anonymous
Cryptochecksum:f3bd954d1f9499595aab4f9da8c15795
: end
also here is the packet trace
and my acl
Thanks

Link Problem with port 2 in WLC 4402

Hi,
I have a problem with port 2 in Wireless Lan Controler 4402. The problem is that the distribution port 2 of the WLC not link with the switch (3750). We receive the WLC and we follow the autostart wizard and we enable LAG. The wizard finish, I restart the system and all works fine. The two distribution ports of WLC, 1 and 2 appears UP and the LAG works correctly. After this we upgrade the firmware of the WLC to the version AIR-WLC4400-k9-6-0-182-0.aes and we restart the system again but at this time port 2 does not link and port 1 link OK. We do not know the reason why port 2 doesn´t link? Could you help me ?
Thank in advance.
Regards.

Does it properly refuse authentication ? Or does the login page stop appearing or something ?
There was a bug with the webauth dying under heavy load, regardless of number of identical accounts used.
One good way for you to check would be, when problem occurs, to create a second backup guest user and see if that would start working. If it doesn't, the account is not the problem.
I'm not aware of any maximum of usage of the same account.
Which 4.2 exactly are you running ?

Problem with Port Forwarding in WRT320N

Good day.
I have a web-server and Internet-radio translator to local network of my provider. And I found a problem with Port Forwarding. I'm trying to setup 80 & 8000 ports to forward. And it's working but only for Internet, without provider's local network. My web-server isn't accessible in local network and radio-translator too.
So is it possible to forward ports absolutely - for any type of connections?
P.S. DMZ is working like Port Forwarding.

If you ask questions you have to mention that you have an PPTP connection to the internet and another network directly on the internet port. Otherwise noone will really understand your question as it is a very unusual setup.
Your setup is not one really supported by the router. You are lucky that it works but don't expect too much. Port forwarding only the internet connection. If you use PPTP the network on the internet port is basically hidden. Using that local network on the internet port is not supported.
The DMZ host is the IP address to which all ports are forwarded to which are not forwarded otherwise. The same restriction applies here.
I would recommend to ask your ISP which router they recommend for their internet connection. I think most/all Linksys routers and many other brand's consumer routers won't really support a setup like yours...

10g: problem with similar named listeners

Hi,
env:
2 node OEL cluster (not rac, a linux cluster)
11.2.0.3 GI
11.2.0.3 and 10.2.0.5 DB's
The problem seems to be that lsnrctl in 10g is only using the first 12-13 characters of the listener name.
I have a listener configured with the name listener_prodXXX, when I configure another listener named listener_prodYYY and want to start ist:
lsnrctl start listener_prodYYY
TNS-01106: Listener using listener name listener_prodXXX has already been started.
ps -ef |grep -i listener_prod
oracle 2784 1 0 13:03 ? 00:00:00 /oracle/product/10.2.0/XXX/bin/tnslsnr listener_prodXXX -inherit
is there a rule for naming the listeners?
confused greetings
Daniel

Of course I was searching docs/metalink before but couldn't find anything there, so I was asking here.No sign of searching exists in your posts
If you have only one listener with multiple db's and want to do some maintenance on one of them, how do you avoid user connecting to it?Put the database in restricted session mode
I don't think its forbidden to use multiple listeners, so if I'm having a problem with the configuration the forum should be the place to ask, isn't it?It is not forbidden to use multiple listeners, but in 999 out of 1000 cases it is not required, and people 'think' they need multiple listeners for the wrong reasons.
Your post is no exception.
So, yes, if you want to setup multiple listeners, without apparent and/or sound reasons, I will explain you don't need them/.
There is nothing wrong about that, isn't it? Many people here 'think' they know Oracle, few have experience and know they do.
Sybrand Bakker
Senior Oracle DBA

Problem with Port Forwarding (when PPTP is up) in WRT-160N

Hi, everybody!
I'm looking for some help with Port Forwarding in my new router from Linksys. I've bought the router afew daysago, and was badly surprised when I found out that there is DD-WRT firmware is installed in it (the router was 100% NEW when I've purchased it). I have downloaded the latest original Linksys firmware file and successfully flashed it.
But I still have problem (same I had on DD-WRT firmware too) with port forwarding for my DC++ and Vuze (app for torrents): I've written port forward for ports 49151 (for Vuze) and 4000 (for DC++) to be forwarded to my desktop computer (IP 192.168.1.201) -- I've seen a post at this forum, that there could be a problem, if you forward to an IP, which is inside DHCP local zone, so I've forwarded it to .201 IP (my local DHCPzone is 192.168.1.100 - .149). But forwardind doesn't work ((
What's wrong?
My configuration:
Router IP: 192.168.1.1
PPTP (I've got it from my ISP)
IP address: 192.168.226.127
Default Gateway: 192.168.226.2
DNS 1: 192.168.1.1
DNS 2 & 3: 0.0.0.0
PPTP Server IP Address: 192.168.226.2
Username: ****
Password: ****
Single Port Forwarding:
Application name     External port     Internal port     Protocol     To IP address     Enabled
Vuze 49151 49151 Both 192.168.1.201    Checked
DC    4000 4000            Both           192.168.1.201 Checked
Solved!
Go to Solution.

As you have mentioned in your post that your ISP has provided you a PPTP connection with an IP address: 192.x.x.x. The IP address which is provided to you by your ISP is in a Private Range, and if you try to forward any ports on your router it will not work, as your ISP modem will block that port. So you need to get a Public IP address from your ISP.
As you are getting Private IP from your ISP, so this connection is called as NAT behind NAT, and your Modem is acting like a Router.
So now you have 2 options, get the Public IP address from your ISP or change the connection type.

Problems with porting to Personal Java

Hi all,
I'm currently trying to port a java application to Personal Java to run on the jeode jvm. The application needs certain packages from Java standard Edition, packages like java.util.Properties.class etc. However when I add this package to the core jar of classes for jeode, my program still cannot see it. I keep getting a NoSuchMethod Error on java.util.Properties.setProperties. This method does exist, and I am calling it correctly.
I'm just wondering if anyone has met this sort of a problem with jeode? Also packages like java.lang.object and java.lang.string don't appear in the main jar file for jeode? Does anyone know if this is correct?
Many thanks for yor help in advance,
Shane

Hi all,
I'm currently trying to port a java
a java application to Personal Java to run on the
jeode jvm. The application needs certain packages
from Java standard Edition, packages like
java.util.Properties.class etc. However when I add
this package to the core jar of classes for jeode, my
program still cannot see it. I keep getting a
NoSuchMethod Error on
java.util.Properties.setProperties. This method does
exist, and I am calling it correctly.
I suppose you mean java.util.Properties.setProperty(String, String) ? This API was added to Properties in Java 2, so it is not available in Personal Java. You will have to use put(Object, Object), which Properties inherits from Hashtable.
As a suggestion, try running JavaCheck on your project to find uses of APIs not contained in the pjava spec.
Regards,
Alex

Forms/Designer 10g - problem with attached libraries

I've problem with forms with attached libraries. All of libraries have removed paths. I can run all forms without any problem on my local application server from Forms Builder 9i or Designer 9i. I added all paths in registry FORMS90_PATH. WORKINGDIRECTORY in formsweb.cfg is blank.
Unfortunately I can't do it with Developer 10g on second workstation. I added all paths in registry FORMS_PATH. WORKINGDIRECTORY in formsweb.cfg is blank too. When form is running I get ORA-06508. I can't store all files (fmb, fmx, pll, plx etc.) in one folder because I've to use CVS. In this case I can't set any folder in WORKINGDIRECTORY.

Assuming Forms 10.1.2.x, FMX, MMX, PLX, and OLB files are found based on the value of FORMS_PATH which is set in default.env and not the Registry. This applies to runtime only. The Builder uses the Registry.
Understand that "runtime" refers to any time a form is displayed in a browser, regardless of whether is was started from the Builder or Application Server.
Also, be aware that if you have FMX, MMX, or PLX files which were created in older versions they must be recompiled using the 10.1.2 compiler.

10G Problem with HTTPServletRequests

Hi everyone, since we put in 10G we have a strange problem with HTTPServletRequests. We use a number of service servlets for loading images and performing data selections etc... Since we put in 10G the HTTPServletRequests seem to get mixed up so that the data selection servlet does not get its proper request but instead the last requrest that was processed by the image selection servlet.
This is definiteley realted to either a 10G setting that we somehow missed or a 10G bug. When we deploy to the server which runs the old OC4J it works fine and it used to work fine in 9.0.3.
Any ideas would be appreciated.
TIA

Hi everyone, we believe it's a timing issue. We added some logic to dump everything from the HTTPServletRequest to the log which slows down the process. It works much better then and the delay appears to help in getting the proper request to the proper servlet.
Any comments would be appreciated.
TIA

RV220W - Problems with Port 25 and SMTP

Hello. I'm really new to networking but I've been given the task of fixing a problem with our RV220W. Up until about two weeks ago our VOIP service would send our voicemails to our emails in a wav. file. But that's stopped completely when we came back last monday. I contacted our VOIP provider and they said they only send emails on port 25 and that our port must not be open anymore. (No network changes have taken place on our end)
So I did the following to open up port 25:
Then I
Still didn't work and they ran a diagnostic and got the following:
(10:42:30 AM) Liz: I restarted the postfix service and then tried to send a test:
(10:42:52 AM) Liz: Unfortunately, same timeout:
Oct 3 10:41:55 pbxtra6939 postfix/smtp[12538]: connect to ratsound.mail.pairserver.com[66.39.4.106]: Connection timed out (port 25)
Oct 3 10:41:55 pbxtra6939 postfix/smtp[12538]: AB9472EC010: to=<[email protected]>, relay=none, delay=30, status=deferred (connect to ratsound.mail.pairserver.com[66.39.4.106]: Connection timed out)
Our normal email service reported that they received no activity on there end and our ISP said they were not blocking port 25. So it must be something in the network settings right?
Any help would be appreciated as this is driving me bananas.
Thank You
Kea Kanamu

@indicter
Thank you for using HP support forum. I have sent you a private message. If you’re unsure how to check your private messages please click here.
Thank you,
Omar
I Work for HP

Problems with Port Forwarding for RDP in WebVPN

Hi,
I'm hoping somebody can help me solve this problem that's been bugging for weeks. We recently implemented a double-layer firewall architecture. Before that, our users can access RDP via port forwarding on WebVPN or the Cisco VPN client without any problems.
After we implemented the double-layer firewall architecture, users who are going through the WebVPN and port forwarding for RDP began to experience frequent disconnections, slowness or freezing connections. The users who are using the client are fine.
I checked the logs and I'm getting repetitive TCP-O for the port forwarding connections for RDP. Additional information: the FW we installed as a 2nd layer is Netscreen. I've already set the policy on it to Any-Any for the meantime to help in troubleshooting but to no avail.
I hope somebody can help me in sorting this out as I'm kind of confused on the difference between the port-forwarding for RDP via the WebVPN and the normal RDP via the client.

Hi,
I didnt see anything marked with red in the above? (Atleast when I was reading)
I have not really had to deal with Routers at all since we all access control and NAT with firewalls.
But to me it seems you have allowed the traffic to the actual IP address of the internal server rather than the public IP NAT IP address which in this case seems to be configured to use your FastEthernet4 interfaces public IP address.
There also seems to be a Static NAT configured for the same internal host so I am wondering why the Static PAT (Port Forward) is used?
- Jouni

Problem with Port Forwarding - Password.

Hello,
I have a LINKSYS router, model BEFW11S4 v4 and its firmware is version 1.52.02
My problem is that neither can I do Port Forwarding nor Port Triggering, because when I make the changes I need and press "Save Changes", it asks me for the username and password again. I write them again, but this time it does not accept them.
I have tested it with 2 laptops connected to the router wired the first time and wireless other times.
What should I do?
Thank you in advance.

Normally, you cannot "see your modem" in your network. This is because a modem does not have an IP address. A modem simply converts one signal (ADSL, DSL, or cable) into another signal which is an ethernet signal.
However, some devices that people call "modems" are actually "modem-routers". In this case your "modem-router" probably does have an IP address. If your system is set up correctly, you can "see" a "modem-router" that has an IP address, but it is not part of your LAN (local area network). It is on a another subnet.
The ethernet port of the modem should be wired to the "Internet" port on the BEFW11S4. Do not connect the modem to any other port on the router.
Maybe we need to back up a step or two here. I have always assumed that you were able to get a properly working wired Internet connection through your BEFW11S4. Is that correct?
What is the make and model of your modem?
Who is your ISP?
Also, when you set up your router, leave the username blank.   Do not try to add a user name. Change the password to something unique. Do not use the password default "admin"   (with no quotes).
Since you are still having problems, please use the following protocol to reset your router to factory defaults:
1)  Power down all computers, the router, and the modem, and unplug them from the wall.
2) Disconnect all wires from the router.
3) Power up the router and allow it to fully boot (1-2 minutes).
4)  Press and hold the reset button for 30 seconds, then release it, then let the router reset and reboot (2-3 minutes).
5) Power down the router.
6) Connect one computer by wire to port 1 on the router (NOT to the internet port).
7) Power up the router and allow it to fully boot (1-2 minutes).
8) Power up the computer (if the computer has a wireless card, make sure it is off).
9) Try to ping the router. To do this, click the "Start" button > All Programs > Accessories > Command Prompt. A black DOS box will appear. Enter the following: "ping 192.168.1.1" (no quotes), and hit the Enter key.  You will see 3 or 4 lines that start either with "Reply from ... " or "Request timed out."   If you see "Reply from ...", your computer has found your router.
10) Open your browser and point it to 192.168.1.1. This will take you to your router's login page. Leave the user name blank, and in the password field, enter "admin" (with no quotes). This will take you to your router setup page. Note the version number of your firmware (usually listed near upper right corner of screen). Exit your browser.
If you get this far without problems, try the setup disk (or setup the router manually, if you prefer), and see if you can get your router setup and working.
If you cannot get "Reply from ..." in step 9 above, your router is dead.
If you get a reply in step 9, but cannot complete step 10, then either your router is dead or the firmware is corrupt. In this case, use the Linksys tftp.exe program to try to reload your router with the latest firmware. After reloading the firmware, repeat the above procedure starting with step 1.
If you have problems, report back the results of steps 9 and 10. Also, if you get any error messages, copy them exactly and report back.
Message Edited by toomanydonuts on 04-14-200705:19 PM

Problem with Port Range Forwarding WRV54G

I have configured my WRV54G to do the following, in this order, on the Port Range Forwarding page of the router:
1. Forward port 3389 to LAN Static IP x.x.x.100, a desktop PC. I have confirmed this works, a port scan shows this port is open and I can remote desktop into x.x.x.100
2. Forward port 443 to LAN Static IP x.x.x.101. I have confirmed this works, a port scan shows this port is open I can VPN to an SSL concentrator at x.x.x.101
3. Forward port 3390 to LAN Static IP x.x.x.102, a desktop PC. THIS DOES NOT WORK. A port scan shows that this port is not open. I have configured the remote desktop host at x.x.x.102 to use port 3390. Netstat shows that x.x.x.3390 is listening on this port. I can remote desktop to x.x.x.102 from inside the LAN, no problem, so it's not an issue with the PX configuration.
So, then I switched the order of the port forwarding instructions, in this order, as follows:
1. Forward port 3389 to LAN Static IP x.x.x.100, a desktop PC. I have confirmed this works, a port scan shows this port is open and I can remote desktop into x.x.x.100
2. Forward port 3390 to LAN Static IP x.x.x.102, a desktop PC. I have confirmed this
works, a port scan shows this port is open and I can remote desktop into x.x.x.102
3. Forward port 443 to LAN Static IP x.x.x.101. THIS DOES NOT WORK. Port scan shows this port is not open.
It looks like the WRV54G is only recognizing the first two entries in the Port Range Forwarding table and IGNORING the third entry. HELP??!!
I have the latest firmware installed: v2.39.2e
Anyone have a solution? Thanks in advance!
Message Edited by crescendi on 07-19-2008 11:53 AM

Are you still using the DHCP server range of x.x.x.100 through x.x.x.149 ? If so, then your problem may be that you are using illegal fixed LAN IP addresses.
With Linksys routers, any fixed LAN IP address must be outside the DHCP server range, and it cannot end in 0, 1, or 255.
I would suggest that you fix the illegal addresses, then see if that resolves your problem.
Here is the full set of rules for using fixed LAN IP addresses:
With Linksys routers, a fixed (static) LAN IP addresses must be assigned in the device that is using the address. So you need to enter the fixed address in the computer or printer, not in the router.
When using a Linksys router, any fixed LAN IP address must be outside the DHCP server range (typically 192.168.1.100 thru 192.168.1.149), and it cannot end in 0, 1, or 255.
Therefore any fixed LAN IP address would normally need to be in the range of
192.168.1.2 thru 192.168.1.99 or
192.168.1.150 thru 192.168.1.254
assuming you are still using the default DHCP server range.
Also, in the computer, when you set up a static LAN IP address, you would need to set the "Subnet mask" to 255.255.255.0 and the "Default Gateway" to 192.168.1.1 and "DNS server" to 192.168.1.1
It is also important that no two devices on your network be set to the same static LAN IP address.

Problem with port

Hi,
I've created a port with transction "idx1" in the client 100.
But this port does not display in transaction "we 20"(Partner profiles)in the client "100" but it displayes in the client 000.
Can anybody help me please?
Thanks for your help.
Regards
Stefan

Hi Stefan,
if you want to send idocs to XI
you don't need ports in WE20
idx1 is all you need
R/3 sends/receives idocs directly to/from idoc adapter
so no data in WE20 is needed
I believe there's a way to send idocs to XI
in a standard way (with WE20) - with SP14
but this is not the standard way and that's not how
XI uses idoc's interfaces
BTW
Remember your XI is an <b>Integration server</b>(TCODE - SXMB_ADM) not an application server
Regards,
michal
Message was edited by: Michal Krawczyk

Oracle 10g - Problem with Date Ranges using Between

I am keeping track of patients who have not been contacted during a date range. if a nurse adds an event or note and the note is type 1,3,4 then this is a contact. The following works but if the event or note was made on the same day as the report is run, the current contact is not printed. Any help to improve the query and identify the problem would be appreciated. Also, if you add '1' to' n.created_date_time BETWEEN '10-Jan-2010' AND TRUNC(SYSDATE)' so it is ' n.created_date_time BETWEEN '10-Jan-2010' AND TRUNC(SYSDATE) + 1'. It works. What is wrong?
SELECT upper(symptom_text),
COUNT(UNIQUE(c.patient_id)) ,
COUNT(UNIQUE(
CASE
    WHEN e.eventdate BETWEEN '10-Jan-2010' AND TRUNC(SYSDATE)
    OR (n.created_date_time BETWEEN '10-Jan-2010' AND TRUNC(SYSDATE)
    AND n.note_type_id                                             IN (1,3,4))
    THEN c.patient_id
    ELSE 0
END)) - 1
FROM patient c,
cust_info ci,
event e,
note n
WHERE c.physician_id = 74
AND c.patient_id      = ci.patient_id
AND ci.info_type_id    = 32
AND ci.symptom_text      IS NOT NULL
AND c.patient_id      = e.patient_id(+)
AND c.patient_id      = n.pk_id(+)
AND n.table_name(+)    = 'patient'
GROUP BY upper(symptom_text)
ORDER BY DECODE(upper(symptom_text), 'A+', 1, 'A', 2, 'B', 3, 'C', 4, 'D', 5, 99)I suspect the end date is not inclusive. Fields are Date data types. Thanks for any help.

Hi,
achtung wrote:
Understood. Frank was correct. Do you mean about the dates? Is that issue solved now?
It would help a lot if you posted some sample data (CREATE TABLE and INSERT statements) and the results you want from that data. Simplify as much as possible. For example, if everything involving the e and n tables is working correctly, forget about them for now. Post a question that only invloves the c and ci tables.
But, additionally, when a record in the cust_info doesn't exist my contact count is inaccurate. How can you explain this conceptually. I understand the query path is checking for this record due to the predicate. Perhaps the query should be redesigned. Thanks for your input!Again, you can see the results, and you know what they should be. Nobody else has that information. Please post some sample data and the results you want from that data.
In your earlier message you said
Could there be a problem if a record does not exist in the ci table?The condition:
AND ci.symptom_text IS NOT NULL
filters for this right? Maybe this could be part of the problem. why I'm not seeing records when a note is added to a patient's doc. How would this be technically be explained? You're doing a inner join between c and ci:
    AND c.patient_id      = ci.patient_id
    AND ci.info_type_id   = 32
    AND ci.symptom_text   IS NOT NULL ...Rows from c will be included only if there is a row in ci with the same patiend_id: even more, that matching row in ci must also have info_type_id=32 in a non-NULL symptom_text, otherwise, the row from c will be ignored.
If you want rows from c to be included even if there is no matching row in ci, then do an outer join, like you're already doing with the e and n tables:
WHERE c.physician_id = 74
    AND c.patient_id         = ci.patient_id (+)
    AND ci.info_type_id (+) = 32
    AND ci.symptom_text (+) IS NOT NULL
    AND c.patient_id         = e.patient_id(+)
    AND c.patient_id         = n.pk_id(+)
    AND n.table_name(+)      = 'patient'

10g problem with ports

Similar Messages

Maybe you are looking for