Sound alerts for received and sent mail not working

How can this be fixed? Using yahoo email. Did work before upgrading to os4.3

Do you have system sounds off?  Go into settings and see if you have selected Mute System Sounds or Lock Screen Orientation for the button on the right hand side of your iPad, just above the volume control.  If you have Mute System Sounds checked, simply move the button in the opposite direction.  If you have Lock Screen Orientation checked for that button, click your home button once to go to your home screen.  Then double click your home button twice and your most recently used Apps will appear on the bottom row.  On that row, with your finger, swipe those Apps to the right all the way and an icon will appear on the very left side.  It should be a mute button and by touching it, you will turn system sounds back on.  Let me know if this solves your problem. 
If neither option works, reboot your iPad.  Press and hold BOTH the power and home buttons at the SAME time for at least 10 seconds (ignore red slider) until the Apple Logo appears, then let go of both buttons and your iPad will restart.  You will not lose any data or settings.

Similar Messages

  • After i use 4.3.3 for iphone 4. the notification for facebook and yahoo do not work. what is wrong? anyone can help?

    after i use 4.3.3 for iphone 4. the notification for facebook and yahoo do not work. what is wrong? anyone can help?

    I am also on my forth hard drive on the same model.
    When I unpacked the computer, the hard drive did not include OS X either. Actually, it was completely blank. Did not even have a partition table! I have also had random problems with the machine not charging.
    I have replaced the drive myself with an SSD after figuring the Apple Certified technicians were incompetent. Now even the SSD is starting to fail
    I have bought an HP laptop and setup Ubuntu on it. Hope it turns out better than my previous four various Mac models. All have had various repeating hardware issues that Apple Certified technicians have been unable or unwilling to correct.

  • My iPad 2 started to backup iCloud and its now locked up. How do i unlock it, the button for settings and close are not working. What can I do?

    my iPad 2 started to backup iCloud and its now locked up. How do i unlock it, the button for settings and close are not working. What can I do?

    Try this.
    Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

  • Color Swatches in Toolbar for Fill and Stroke are not working properly.

    The color swatches in toolbar for fill and stroke are not functioning as they should.  When I select an object on the artboard, the swatches display fine in the toolbar for what they should be.  However, when I double-click on those swatches from within the toolbar to modify the color, the color which comes up is #000000 instead of the actual color it should be. 
    I am using 16.2.1 (cloud) for Mac OS 10.8.2
    I've submitted a bug report, but want to know if anyone else has had this issue and what they did to resolve the issue.
    Also, the eyedropper tool is buggy and occasionally places the #000000 into an object instead of the characteristics the eyedropper is selecting.  I don't have any hidden layers or weird groupings, it just randomly decides when it is going to work or not.
    I've never had these issues on previous versions of illustrator and have been proficient in all versions since 2007.

    Double click the eyedropper, and turn on appearance, is off by default.
    For your #000000 color problem that also likely is related to appearance setting. You may have for example have some with #000000 at the character level, and another color at the type level.

  • Paid for Conversion and it Does not Work

    I paid to convert files and it is not working!!!!  It keeps asking me to subscribe, when I have already subscribed and have paid!!!!  And, I need to convert this document immediately!!!!

    You have posted in the wrong forum and since the software/service is not identified I am unable to point you to the correct forum in which to post.
    Here is a link to a page that links all of the Adobe forums.  Find the one for the product your posting involves and post there:
    http://forums.adobe.com/index.jspa

  • Oracle Connector for Outlook and Sent Mail

    I'm very desperate for help with my problem. I have a customer that uses Outlook 2003 with the Oracle Connector for Outlook. When I set up the Connector, I only had it handle her Calendar. By that I mean that the only thing I wanted the Connector to do was pull her Oracle Calendar information and put it into Outlook's calendar. I used the default setting of the Connector of IMAP, but deselected the incoming and outgoing mail servers.
    The user kept having problems with Outlook going Offline so I decided to remove the Connector. I did not realize until after removing the Connector account from Outlook that her sent mail was being saved in Oracle. This is very problematic for me because I have no idea what to do. Is there a way to retrieve the sent mail? I don't even understand why the sent mail was being saved within the Oracle folder. Once I deleted the Connector account in Outlook I was then told that I had to choose another folder for new mail to go to so I chose Personal Folders.
    If I go to \Documents and Settings\User's Name\Local Settings\Application Data\Microsoft\Outlook, I find the folder for the Connector. There is one in particular that has a .dll file that is about 56MB in size. However, I have no idea if that's the sent mail and, if so, how do I retrieve it.
    I'd GREATLY appreciate any help that can be given on this. I simply would like to know if there is a way to retrieve that mail.
    The user is using an IMAP account. This is NOT an Exchange account.

    1. Yes, OCFO is only for comunication with Oracle Calendar
    2. Yes, you can see any mail stored on the Oracle IMAP server without OCFO. Just subscribe to IMAP folders you want ...

  • Mail and .mac mail not working

    Well, I've sent 3 emails to customer service to no avail, so hopefully someone else on these inter-tubes is having the same problem. 3 days ago my mail stopped working. Mail on my Mac continually says my password has been rejected. OK, Mail sometimes is flaky. I can live with that (for now), but I also can't get email from a web browser. I can log in just fine and dandy. Bookmarks? Check. iWeb web sites? Check. iDisk, iCards, iCal? Check, check, and check. Mail? "Your information could not be displayed. Click here to try again." I've clicked "here" more times than Steve Jobs says "Amazing" at a keynote. I've tried on several different computers all with the same results. If anyone can help I'd be eternally grateful. Thanks! FYI, I have had this account since iTools.
    Allen

    Try recovering/changing your password. Take a look at theses sites which may help you:
    http://myinfo.apple.com
    http://iforgot.apple.com

  • Preview and Mac Mail not working after upgraded to 10.4.11

    Hello,
    I just upgraded to 10.4 everything works fine, after I upgraded to 10.4.11, I find funny noice on my hard drive and preview, mac mail is not working. Trashing the preference is not working.
    Urgent help please.
    Thank you
    Benny

    There are no guarantees, but following this procedure when installing updates and upgrades on your Mac, or even re-installing them, will go a long way towards avoiding unpleasant after effects and ‘post-update stress disorder’.
    It is also worth noting that it is an extreme rarity for updates to cause upsets to your system, as they have all been extensively beta-tested, but they may well reveal pre-existing ones, particularly those of which you may have been unaware. If you are actually aware of any glitches, make sure they are fixed before proceeding further.
    So before you do anything else:
    If you can, make a full backup first.
    Turn off sleep mode for both screen and hard disk.
    Disconnect all peripherals except your keyboard and mouse.
    1. Repair Permissions (in Disk Utility)
    2. Verify the state of your hard disk using Disk Utility. If any faults are reported, restart from your install disk (holding down the C key), go to Disk Utility, and repair your startup disk. Restart again to get back to your startup disk.
    At least you can now be reasonably certain that your system does not contain any obvious faults that might cause an update/upgrade to fail.
    3. Download the correct version of the COMBO update from the Apple download site. If your car runs on gasoline you would not want to fill the tank with diesel, so don’t try to install the PPC updater on an Intel Mac!
    The 10.4.11 Combo Updater for PPC Macs is here: http://support.apple.com/downloads/MacOS_X_10_4_11_Combo_Update__PPC
    And for Intel Macs: http://www.apple.com/downloads/macosx/apple/macosx_updates/macosx10411comboupdat eintel.html
    If you prefer to download updates via Software Update in the Apple menu (which would ensure that the correct version for your Mac was being downloaded), it is not recommended to allow SU to install major (or even minor) updates automatically. Set Software Update to just download the updater without immediately installing it. There is always the possibility that the combined download and install (which can be a lengthy process) might be interrupted by a power outage or your cat walking across the keyboard, and an interrupted install will almost certainly cause havoc. Once it is downloaded, you can install at a time that suits you. You should make a backup copy of the updater on a CD in case you ever need a reinstall.
    Full details about the 10.4.11 update here: http://support.apple.com/kb/TA24901?viewlocale=en_US
    More information on using Software Updater here:
    http://support.apple.com/kb/TA24901?viewlocale=en_US
    Using the Combo updater ensures that all system files changed since the original 10.4.0 are included, and any that may have been missed out or subsequently damaged will be repaired. The Delta updater, although a temptingly smaller download, only takes you from the previous version to the new one, i.e. for example from 10.4.10 to 10.4.11. Software Update will generally download the Delta updater only. The preferable Combo updater needs to be downloaded from Apple's download site.
    Now proceed as follows:
    4. Close all applications.
    5. Unplug all peripherals except your keyboard and mouse.
    6. Install the update/upgrade. Do not under any circumstances interrupt this procedure. Do not do anything else on your computer while it is installing. Be patient.
    7. When it ask for a restart to complete the installation, click restart. This can take longer than normal, there are probably thousands of files to overwrite and place in the correct location. Do nothing while this is going on.
    8. Once your Mac is awake, repair permissions again, and you should be good to go!
    If your Mac seems slightly sluggish or ‘different’, perform a second restart. It can’t hurt and is sometimes efficacious!
    9. Open a few of your most used applications and check that all is OK. In this connection please remember that not all manufacturers of third party applications and plug-ins, add-ons, haxies etc, will have had time to do any necessary rewrites to their software to make them compliant with the latest version of your operating system. Give them a weeks or two while you regularly check their websites for updates. This applies particularly to plug-ins for Safari 3.
    N.B. Do not attempt to install two different updates at the same time as each may have different routines and requirements. Follow the above recommendations for each update in turn.
    Lastly, Apple's own article on the subject of Software Update may also be useful reading:
    http://docs.info.apple.com/article.html?artnum=106695
    If you are updating Safari (or just have):
    Input Managers from third parties can do as much harm as good. They use a security loophole to reach right into your applications' code and change that code as the application starts up. If you have installed an OS update and Safari is crashing, the very first thing to do is clear out your InputManagers folders (both in your own Library and in the top-level /Library), log out and log back in, and try again.
    So, disable all third party add-ons before updating Safari, as they may not have been updated yet for the new version. Add them back one by one. If something goes awry, remove it again and check on the software manufacturer's website for news of an update to match your version of Safari. Remember: Tiger up to 10.4.10 used Safari 2.0.4 or, if you downloaded it, Safari 3.0.3 beta. Safari 10.4.11 used Safari 3.0.4 which was not a beta. If Safari 3.1.2 on 10.4.11 is not the fastest browser you have ever used, then something is wrong!
    Moreover, trying to revert to Safari 3.0.4 (or worse still, version 2) when running 10.4.11 or 10.5 can have repercussions, as Safari 3.1.1 uses a completely different webkit on which other applications like iChat, Mail and Dashboard Widgets etc also rely, and may entail you having to reinstall an earlier operating system.
    Most errors reported here after an update are due to an unrepaired or undetected inherent fault in the system, and/or a third party ad-on. Two such add-on that have been frequently mentioned here for causing such problems are Piclens and Pithhelmet. If you have them, trash them.
    Additional tips on software installation here:
    http://docs.info.apple.com/article.html?artnum=106692
    To reiterate, Input Managers reach right into an application and alter its code. This puts the behavior of the affected application outside the control and responsibility of its developers: a recipe for problems. That's not to say that issues absolutely will ensue as a result of Input Managers, but you, as a user, must decide. If the functionality of a specific Input Manager or set thereof is really important to you, you may well choose to assume the associated risk.
    Again, the advice is to remove all Input Managers from the following directories:
    • /Library/InputManagers
    • ~/Library/InputManagers
    especially prior to system updates (they can always be added back one-by-one later).

  • IMAP and Apple Mail - not working properly

    Hi all,
    I am using Apple Mail and want to use my GMX account with IMAP and are facing 2 issues:
    (1)
    While all changes I make directly at www.gmx.ch are being made in Apple Mail on my MacBook Pro, the changes I make in Apple Mail (like moving mails to subfolders, deleting mails, etc.) are not reflected on the GMX server.
    (2)
    Sent emails are often put in the Drafts folder AND Sent folder. They are sent, but still appear in the draft folder as they were not sent.
    Any idea how to solve these issues?
    Thanks a lot & best regards!

    You aren't giving us all the relevant information, are you? I bet you access your Gmail account from more than one computer, don't you?

  • 11.1.1.6.4 Repository variables for DSN and USER do not work after upgrade

    Hi,
    The Repository Variables OLAP_DSN and OLAP_USER no longer work after upgrading to 11.1.1.6.4 i.e they return a connection error when trying to import metadata but the connection is correct if explicitly set without the variable used.
    I have tried the following resolution:
    - From command line execute commands to set variable properties via admintool.exe /command vartext.txt
    Open rpdname user password
    SetProperty "Variable" "OLAP_DSN" Initializer "'ORCL.GLOBAL'"
    Save
    Close
    Exit
    This script works fine as demonstrated by commenting out Save, Close, Exit and running. But it does not resolve the problem.
    The issue is consistent as in the OLAP_USER variable does not work if DNS for connection pool set to ORCL.GLOBAL.
    Is this a bug?
    Thanks in advance
    Edited by: 983325 on 26-Feb-2013 02:35

    There is a 3.1.0.5 client. First thing I would try is the newest client.
    Sent from Cisco Technical Support iPad App

  • E-Recruitment,Syncronization for Employee and Business Partner not working?

    hi there,
    i itend to create a business partner for employee in SAP E RECRUITMENT but when i run the report HRALXSYNC for an employee, the result i am getting is total blank. I suppose there should be some errors if it is not working properly, but the the screen after running the report is total blank.
    are any prior settings must me meet before the business partners can be created using HRALXSYNC?
    thanks you

    HI Ravi
    Requirements to use the report are the activation of the integration for buisness partner. You could get details from sap note  550055.
    You have to switch on the following keys in table T77S0  with  SM30:
    Group    Sem. ID
    HRALX   HRAC           to  'X' for global HR-Integration
    HRALX   OBPON        to "ON"  for activate the integration between organization object  and business partner 
    HRALX   PBPON         "ON"  for activation the integration between central perosn and business partner
    Hope this helps.
    Regards
    Bernd

  • All sound effects for AIM in iChat do not work

    I tried to see if anything was muted in System Prefrences, and everything seemed OK. When I test the sounds in iChat preferences, they seem to work fine, but when I am instant messaging they do not work. Any assistance would be appreciated.
    iMac g5   Mac OS X (10.4.7)  

    Hi Parker244,
    Welcome to the Apple Discussions
    Do you have Developer Tools installed ?
    This would let you look at the .plists with Property List Editor and you could see if the sounds were set in com.apple.ichat.plist
    If not delete it anyway and restart iChat.
    It is in Users/(Your Mac account)/Library/preferences
    9:28 PM Sunday; August 6, 2006

  • Ios6 update for iphone 4, yahoo mail not working

    i updated my I phone 4 with IOS6 today. after the updation, i am unable to access Yahoo mail. i am getting the message that Server could not be contacted.
    please advise. i switched off and turned on the Phone, but still not working.
    please urgently help.

    Then you need to contact China Mobile. BTW, China Mobile is NOT an official iPhone supporter.

  • "Save for Web and Devices" button not working anymore

    I can't use the Save for Web and Devices button anymore. Is there a reason for that, I didn't pay 500$ for a software that won't work.

    Hi Mylenium,
    I use Windows 7 Professional 64-bit.
    As for what I did for it not to work anymore, I did nothing at all. This happen in two steps from what I remember, first the button was working but it was not opening the usual window with 4 different file types you can save the image as, it was giving me an error window that said something in the lines of "Could not initialize". Afterwards, the "Save for Web and Devices" link just became greyed out, and was just un-usable. It's not making sence that I did nothing and the software just does not work properly, I'm wondering if any of the other software in the suit that I purchased do the same thing, and is there a way to fix this.

  • 8.1 icloud drive for Document and Data is not working well

    On my iPad Air 2 and iPhone 6 (both on ios 8.1), every other day my apps would stop syncing with icloud.  I noticed this with a few apps such as 1Password and Drafts 4.
    icloud for default calenders and reminders were still working during this down time, just the Document and Data not syncing with icloud.
    Remedy action:
    (1) I need to off icloud drive
    (2) press on home bottom and On/off bottom simultaneously to re-start the device
    (3) then switch on the icloud drive again to make the Document and Data sync with icloud again.
    This is really irritating and how can I think of a PC-less future when icloud is not reliable?
    I am supposed to gain synergy for using 2 ios devices but I am certainly not feeling it at the moment.
    Please can Apple fix this soon?

    Page and Numbers are having the same problem.  It gets so irritating that I have turned off the icloud drive for both apps.

Maybe you are looking for