12C - No context menu in the variables iterator of pageDef
Hello everyone!!
I'm using jDev 12c and I just noticed that below behavior:
I have a .jsf page and I go to the bindings (pageDef) of the page.
In the variables iterator (Executables column) I right click in order to select "Insert inside variables -> variable" but nothing happens. No context menu appears whatsoever.
So, there's no declarative way to create a variable.
Either the menu is missing on purpose or probably has been omitted accidentally.
Just wanted to mention that...
Hi Timo.
Thanks a lot for your reply.
You are right that I can insert a variable through the structure window (unfortunatelly I hadn't read your article before). This is not a problem.
The other issue remains.
So I create a variable (via the structure window) and then I create an attributeValue pointing to the just created variable. So far so good.
By clicking on other attributeValues, operations, tree bindings etc which reside in the same pageDef, after a few clicks the attributeValue of the variable is pointing to an irrelevant iterator! It's very easy to reproduce.
Similar Messages
-
How to remove options in context menu of the task in UWL.
Hi,
How to remove options or customize the context menu of the task in UWL.
I have 4 options(Edit,Remove,Forward,Resubmit) is appearing in the context menu.
My requirement is to delete Forward option form the menu list and only 3 options
should appear in the list.
Can anybody suggest where to change?
Thanks,
VikasHi vikas,
Go to System Admin ->System Config->UWL Admin.
select your system alias.
Click on Click to Click to Administrate Item Types and View Definitions.
Select your UWL configuration.
Download DTD as well as XML file through Download Configuration.
Then you can edit the xml file using XML spy editor or anyone.
to upload go back to the same page and select the tab...Upload new configuration.
Do not forget to clear the cache after upload.
Hope this helps you.
Regards
Atul Shrivastava -
How do I create a context menu in the new CL_SALV
I like a function xx in context menu. How do I create a context menu in the CL_SALV ?
thank you!
CLASS lcl_event_handler DEFINITION.
PUBLIC SECTION.
TYPES: t_proc TYPE zmp_c00_pr_d,
tt_proc TYPE STANDARD TABLE OF t_proc,
tt_proces_subpr TYPE TABLE OF ltyp_proces_subpr.
CLASS-DATA: lr_context TYPE REF TO cl_gui_alv_grid,
r_selections TYPE REF TO cl_salv_selections,
lr_menu type ref to cl_ctmenu.
CLASS-METHODS: main CHANGING ct_zmp_c00_pr_d TYPE tt_proc
ct_proces_subpr TYPE tt_proces_subpr
cv_screen TYPE i.
PRIVATE SECTION.
CLASS-DATA lt_zmp_c00_pr_d TYPE TABLE OF zmp_c00_pr_d.
CLASS-DATA ls_process TYPE zmp_c00_pr_d.
CLASS-METHODS: handle_double_click
FOR EVENT double_click OF cl_salv_events_table
IMPORTING row column,
detail
IMPORTING l_objkey TYPE zmp_c00_pr_d-objkey.
ENDCLASS. "lcl_events DEFINITION
* CLASS lcl_event_handler IMPLEMENTATION
CLASS lcl_event_handler IMPLEMENTATION.
METHOD main.
DATA: lr_alv TYPE REF TO cl_salv_table,
lr_events TYPE REF TO cl_salv_events_table,
lr_columns TYPE REF TO cl_salv_columns,
lt_col_tab TYPE salv_t_column_ref.
FIELD-SYMBOLS <column> LIKE LINE OF lt_col_tab.
IF r_container IS INITIAL.
CREATE OBJECT r_container
EXPORTING
container_name = 'CONTAINER'
EXCEPTIONS
cntl_error = 1
cntl_system_error = 2
create_error = 3
lifetime_error = 4
lifetime_dynpro_dynpro_link = 5
OTHERS = 6.
IF sy-subrc <> 0.
MESSAGE i004(z_pm_tool).
ENDIF.
*Für Dynpro 1400
IF cv_screen = '1400'.
TRY.
CALL METHOD cl_salv_table=>factory
EXPORTING
* list_display = IF_SALV_C_BOOL_SAP=>FALSE
r_container = r_container
IMPORTING
r_salv_table = r_alv
CHANGING
t_table = ct_proces_subpr.
CATCH cx_salv_msg .
ENDTRY.
TRY.
* zeige die Daten
r_alv->display( ).
IF sy-subrc NE 0.
MESSAGE i001(z_pm_tool).
ENDIF.
CATCH cx_salv_msg.
ENDTRY.
ENDIF.
* Für Dynpro 1100
TRY.
CALL METHOD cl_salv_table=>factory
EXPORTING
* list_display = IF_SALV_C_BOOL_SAP=>FALSE
r_container = r_container
IMPORTING
r_salv_table = r_alv
CHANGING
t_table = ct_zmp_c00_pr_d .
CATCH cx_salv_msg .
ENDTRY.
TRY.
* zeige die Daten
r_alv->display( ).
IF sy-subrc NE 0.
MESSAGE i001(z_pm_tool).
ENDIF.
CATCH cx_salv_msg.
ENDTRY.
*Ereignisobjekt holen
lr_events = r_alv->get_event( ).
** get the SELECTIONS object
*r_selections = r_alv->get_selections( ).
* Interne-Tabelle füllen und an die Methode handle_double_click übergeben
LOOP AT ct_zmp_c00_pr_d INTO ls_process.
APPEND ls_process TO lt_zmp_c00_pr_d.
ENDLOOP.
* Zeiger auf Container für Kontexmenu
CREATE OBJECT lr_context
EXPORTING
i_parent = r_container.
DATA: lt_events TYPE cntl_simple_events.
CALL METHOD lr_context->set_registered_events
EXPORTING
events = lt_events
EXCEPTIONS
cntl_error = 1
cntl_system_error = 2
illegal_event_combination = 3
OTHERS = 4.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
* Interne-Tabelle füllen und an die Methode handle_double_click übergeben
LOOP AT ct_zmp_c00_pr_d INTO ls_process.
APPEND ls_process TO lt_zmp_c00_pr_d.
ENDLOOP.
* Event: Add Function
SET HANDLER: on_added_function FOR lr_events.
* Event: Kontexmenu
* SET HANDLER: on_context_menu_request FOR lr_context.
* Event: Doppelklick
SET HANDLER handle_double_click FOR lr_events.
* get the SELECTIONS object
r_selections = r_alv->get_selections( ).
* Einzelne Spalte holen
lr_columns = r_alv->get_columns( ).
* Doppelklick funktioniert nur auf das Feld OBJKEY
LOOP AT lt_col_tab ASSIGNING <column>.
<column>-r_column->set_output_length( 20 ).
IF <column>-columnname = 'OBJKEY'.
<column>-r_column->set_visible( 'X' ).
ELSE.
<column>-r_column->set_visible( ' ' ).
ENDIF.
ENDLOOP.
IF lt_col_tab IS NOT INITIAL AND sy-subrc <> 0.
MESSAGE i002(z_pm_tool).
ENDIF.
ENDIF.
ENDMETHOD. "main
METHOD handle_double_click.
FIELD-SYMBOLS <fs_zmp_c00_pr_d> TYPE zmp_c00_pr_d.
READ TABLE lt_zmp_c00_pr_d INDEX row ASSIGNING <fs_zmp_c00_pr_d>. " vor dem Changing Parameter der Klasse
* READ TABLE ct_zmp_c00_pr_d INDEX row ASSIGNING <fs_zmp_c00_pr_d>.
IF sy-subrc <> 0.
RETURN.
ENDIF.
IF column = 'OBJKEY'.
lcl_event_handler=>detail( <fs_zmp_c00_pr_d>-zz_slotid_a ).
ENDIF.
ENDMETHOD. "handle_double_click
METHOD detail.
DATA: lr_alv TYPE REF TO cl_salv_table,
lt_alv_tab TYPE TABLE OF zmp_p00_sp_d.
* Subprozess holen
SELECT * FROM zmp_p00_sp_d INTO TABLE lt_alv_tab
WHERE objkey = l_objkey.
IF sy-subrc <> 0.
MESSAGE i003(z_pm_tool).
ENDIF.
TRY.
* Neu erzeugte Instanz für ALV-Tabellenobjekt holen
cl_salv_table=>factory( IMPORTING r_salv_table = lr_alv
CHANGING t_table = lt_alv_tab ).
* Ausgabe Fenster für SubScreens
lr_alv->set_screen_popup( start_column = 1
end_column = 130
start_line = 1
end_line = 10 ).
* Anzeige der Daten
lr_alv->display( ).
IF sy-subrc <> 0.
MESSAGE i001(z_pm_tool).
ENDIF.
CATCH cx_salv_msg.
ENDTRY.
ENDMETHOD. "detail
ENDCLASS."lcl_event_handler IMPLEMENTATION
Edited by: polaris1 on Dec 15, 2010 12:18 PMCan't read that jumble, but suggest you look at the excellent SALV tutorials by Rich Heilman by searching for SALV tutorial on SCN. You'll find working code and how-to for adding your own functions to SALV.
-
Firefox 3 has a context menu for the drop down list of
the Location Bar. One option on this menu I used often
is "Open Link in New Tab" -- quite convenient.
This context menu has disappeared in Firefox 4.
Can I get it back?See also:
*Tools > Options > Privacy > History: "Remember search and form history"
*https://support.mozilla.org/kb/Form+autocomplete
The "Use custom settings for history" setting allows to see the current history and cookie settings, but selecting that setting doesn't make any changes to history and cookie settings.<br />
Firefox shows the "Use custom settings for history" setting as an indication that at least one of the history and cookie settings is not the default to make you aware that changes were made.<br />
If all History settings are default then the custom settings are hidden and you see "Firefox will: (Never) Remember History".<br /> -
Context Menu on the right click of af:tree node
Hi Experts,
I am using drag and drop functionality in af:tree.In that i used one tree for drag source and another one tree for drop target,and it is working as expected.
Now I want to bring one additional option in the context menu of the target tree node that is ,when i right click on any of the target tree node in addition to the default menu options like "Collapse","Expand" i want to add one more option .For this i added "contextMenu" facet after the "nodeStamp" facet inside the tree.
*<f:facet name="contextMenu">*
*<af:popup id="p1">*
*<af:menu text="Delete" id="m1">*
*<af:commandMenuItem text="Delete" id="cmi1"*
*action="#{myWorkflow.deleteWorkflowNode}"/>*
*</af:menu>*
*</af:popup>*
*</f:facet*>
Now the problem is : before using drag and drop the context menu workes without any problem .But after using drag and drop the context menu is not popped up.
can anybody help me to resolve this?
Thanks,
Priya.Hi Frank,
1. I am using JDeveloper 11.1.1.3 version
2. Drop target tree is having the context menu.
3. Yes . In Drop event am calling a backing bean method with return type DnDAction and i return the value as DnDAction.MOVE to reflect the changes in the database table to the target tree.
Regards,
Priya. -
Remove Resubmit option in context menu of the task in UWL EP7
Hi All
In EP7, the behaviour of the tasks has changed a lot.
when the task appeared in UWL,Clicking on the work items, the form is not getting opened up instead it is showing "Resubmit" option in context menu of the task.
For each task i need the corresponding iView to get opened up. This is how I have configured our uwl.webflow.<system_alias>.xml
How can we remove the Resubmit button and open the form for manager to submit?
I need to revert back to original functionality.
Points will be rewarded
Regards
Sonal Mangla
Message was edited by:
Sonal ManglaHave you looked at this:
http://help.sap.com/saphelp_nw2004s/helpdata/en/09/6d6b17b29b4eef83a553acaa52f668/frameset.htm
Paul -
Context menu in the Universal Worklist
Hello all,
I'm migrating from Portal 7.0 to 7.3, and right now, I'm trying to migrate the UWL configuration.
I created the Universal Worklist Systems, I uploaded all the .xml configurations, I re-registered the system, I configurated the UWL iView... everything was done like in the Portal 7.0... BUT it doesn't works like before. I'm having problems with the "context menu" of each workitem.
In Portal 7.0, when all the "List of UWL Actions to exclude" are typed, the context menu of each workitem dissapears, and I can do a "click" over the workitem and a webdynpro app. is launched.
In Portal 7.3, when all the "List of UWL Actions to exclude" are typed, the context menu of the selected row dissapears, but still remains in the other unselected lines; and the most important thing, when a workitem row is selected, I can't do a "click" over it, it doesn't do anything... If I leave "launchWenDynPro" value into "List of UWL Actions to exclude", I can do a "click" over the workitems, and the webdynpro app. is launched, but the context menu appears...
How can I do to make dissapear the context menu?
I read the following link, but my Portal 7.3 doesn't works like this...
http://wiki.sdn.sap.com/wiki/display/BPX/ContextMenuBehaviourhaschangedinrelease7.10andhigheroftheUniversal+Worklist
Thanks!
Miguel.Hi Miguel,
Thanks for your post. It would be great if you can let me know the complete version of the UWLJWF component from NWA. To get this please do the following:
To get this, please do the following:
Open NWA -> Configuration management -> System info ->
press Components info tab, and for software components
Search for UWLJWF and you will find the component information. Could you please post it here? Is it possible that you can provide a link to some screenshots of what you are seeing as well?
Along with this, have you checked the standard iview from the PCD - if so is this giving the same result?
Regards,
Beth
EP - Senior Support Consultant II
SAP Active Global Support
Global Support Centre Ireland
**SDN Forum Moderator:
http://forums.sdn.sap.com/forum.jspa?forumID=495&start=0
**SDN Universal Worklist Wiki:
http://wiki.sdn.sap.com/wiki/x/ehU -
Hiding Context menu from the UWL header
Hi Experts,
This is Raji. i would like to hide the Context menu (hover menu)from the UWL header table .
Context menu is the one (small icon resides at the right most side of the UWLheader table.The objects availble in the menu are " personalize, refresh etc.."
appriciate your views regarding this.
Raji.Hi ,
I am also trying to acheive the same [Get rid of the menu icon in UWL] , Can you please share the solution?
Thanks,
Smita -
Our team is using VS2013 and TFS 2013, and in our daily work we often open a TFS query, then we need to open a work item, and we often need to copy the ID, for example, to the email.
But currently the field is read only, and we often manually copy it.
So is there any convenient way to solve this? Any built in ways?
If no, is it possible to create such a plugin?
Regards,
Lei Yang
from MotorolasolutionsHi Lei Yang
You can try the following work around to copy work item ID
for VS 2013:
Right click on work item tab header in VS 2013 and click 'Copy Full Path' from context menu
When you paste it on notepad/email you will get work item ID at the end of the path:
http://sumiran-dev:8080/tfs/web/wi.aspx?pcguid=d855bc22-69a8-45a5-b6fc-25f096ade8f5&id=46
For Web Portal:
Right click on work item link at top and click 'Copy shortcut' from the context menu
When you paste it on notepad/email you will get work item ID at the end of the shortcut:
http://sumiran-dev:8080/tfs/DefaultCollection/TFS%20Scrum%20Demo/_workitems/edit/46
Thanks
Sumiran -
Hi,
Does anyone know how to create a context menu (right click on line or field) in the new ALV object model (class CL_SALV_TABLE)?
Thanks in advance
Keld Gregersen
PS: In the past we could use event CONTEXT_MENU_REQUEST in class CL_GUI_ALV_GRID, so it must be possibleI don't think there's "any such animal" in the new class. I'm not 100% certain however but the new class is only useful for fairly simple display only type grids.
There's no edit capability either.
I'd stick with cl_gui_alv_grid until there's some decent extra functionality in the cl_salv_table class.
It's fine for quick "bog standard" displays as it doesn't need a field catalog or any screens to be created by the user or developer - but you pay a price for that in limited fnctionality.
Cheers
jimbo -
Blank labels in the context menu in the process designer window
Hi,
I am using Windows 7 and a livecycle workbench version:
Adobe LiveCycle Workbench ES2
Version: 9.5.0.0.20100908.1.247189
The context menu is blank in the process designer window . I can see that there should be menu items but without text labels, so I can't work with a process because I don't know which is which. I added "-Dosgi.nl=en" to workbench.ini and set local regional setting (from control Panel) to English but it didn't help. There are no exceptions in the .metadata/.log.
Any ideas?I know that this issue is connected to non-English version of Windows 7. I added en-US as my first language in my browser(Internet options).
There are also correct values in the Workbench's Configuration Details:
osgi.nl=en
osgi.nl.user=en
Does anyone have similar problem? On the LiveCycle Start Page I can see that Adobe Flash Player's Settings are still non-English. -
How to change the context menu on the desktop?
I tried it with Automator with the "in every app" but it won´t appear there
Thx for helping
LotharI tried it with Automator with the "in every app" but it won´t appear there
Thx for helping
Lothar -
Remove context menu for the taskbar
Good afternoon,
It is possible to restrict only one program to be executed by the taskbar?
The aim is to be able to open all programs by the taskbar by right click, with the exception of one.
Cmpts,Hi hugo,
I am quite sure about your exact need .
The programs opened should not be combined ?
Check this setting :
If this is not what you want ,please explain your needs more detailed .All the settings about the taskbar are listed in the properties. You can have a look at these settings to find out the exact options to meet your need .
Best regards -
Right click on the mail list doesn't open the context menu any more.
Hi everybody,
Thunderbird stoped to show the context menu on the mail list recently. Right click just prints the crossing line. What the problem could it be?
Thanks anyone for any help.
Win 8.1 64
Thun 31.3.0''Nick532 [[#question-1037921|said]]''
<blockquote>
Hi everybody,
Thunderbird stoped to show the context menu on the mail list recently. Right click just prints the crossing line. What the problem could it be?
Thanks anyone for any help.
Win 8.1 64
Thun 31.3.0
</blockquote>
''Toad-Hall [[#answer-668503|said]]''
<blockquote>
Very odd.
Right click on email in list should open a drop down selection.
Usually a crossed line through something denotes that it is marked as deleted in an imap mail account.
* http://kb.mozillazine.org/Deleting_messages_in_IMAP_accounts
See if there is a conflict with an addon.
Restart Thunderbird in safe mode.
Help > Restart with addons disabled.
then perform the same test; right click on email in list.
Do you get the drop down, if yes, then one of your addons is causing the conflict.
You would have to disbale each in turn to locate which one is the problem.
Maybe the addon needs updating.
Report back on results.
</blockquote>
I have the same problem too. When i restarted with addons disablem problem dissapeared but when i switch to normal mode and disable all off the plugins and addons the problem still remains.
Please help. -
The Right click context menu, and menu butons are all yellow?
The right click context menu, and the Drop down menus for the tool bar, all have Yellow Text.
Everything else is working normally, and the Yellow text is un related to windows itself, as Windows still has the standard coloring for the menus and Right click context. im stumped.
Adblock Plus 2.0.3
Easy YouTube Video Downloader 5.9
EPUB Reader 1.4.1.1
FoxTab 1.4.4
Ghostery 2.7.2
IMVU Toolbar 3.10.0.1
.Net Framework
Personas 1.6.2 [have had same persona for ages so its not that]
Roomy Bookmarks 1.3.3
Smoothwheel 0.45.6.20100202.1
Tab scope 1.1.4
Turn off the lights 2.0.0.71
Yontoo Layers 1.20.00
i have latest version of firefox. 11
no virus detected with Malwarbytes, or Avast.
setting check through windows shows no carry over from a botched windows theme setting.
its cosmetic issue mostly, not harmful.Hmmm, that shouldn't happen. It's difficult to change the text colors in the interface without installing a theme or an add-on that lets you tweak the menus.
Can you try switching between the default theme and your current theme?
Do any of those extensions let you change display settings?
Maybe you are looking for
-
Team Foundation Server 2013.2 - SharePoint 2013 SP1 - Missing Server Side Dependencies
Environment: TFS 2013.2 (update 2) on Windows Server 2012 R2, with MS SQL Server 2014 on the same machine; SharePoint 2013 SP1 (with April 2014 update) on Windows Server 2012 R2 MS SQL Server 2014 on Windows Server 2012 R2 (Used by SharePoint) Title
-
when i put a new hard drive in my macbook i had to reinstall OS X. It seems the software updates didn't get backed up with time machine meaning that I have outdated software for safari and especially itunes. I used time machine to transfer all my fil
-
Business Process Set up - Begineer Questtion
In our company we are planning to implement business process and monitoring in coming months. I am from the basis admin group and would like to know from the system side what need to be done to implement the Business process in SLM. What my understa
-
Clarification about SAP CRM 5.0, SAPPHONE
Hi Buddies, Long time no see. Curently we are considering integrating SAP with our telephony system AVAYA. According to our vendor, there are 2 approaches: SAPPHONE or ICI connectors. It is clear that ICI connector will be based on latest version of
-
How remove files from hard drive, retain on iPod?
Does all music have to be permanently stored on my computer, to have it on my iPod? I have purchased CDs in the past, I still have the CDs and they work fine. I have imported them into iTunes, synched them to my iPod. That all works. Question: I want