15310 CE-MR-6 POS errors
I’m seeing IF,MB,SB errors on the POS side of an MR-6 interface. No errors on the Ethernet side of the mux or the router, this unit supports a CTX module with an OC48 connection, no errors on the carrier side. It’s strange the errors are only on the POS side off the MR-6, thought this was just the internal cross connection between the CTX module and the MR-6. I have multiple connections on the MR-6 card with only one taking errors. Any ideas what might be the source or how to troubleshoot these would be appreciated.
Hi
the error in the CM log is caused by the java code not being able to find the template file in the template manager. Please ensure the main and subtemplates are loaded to the instance correctly.
I think the first error is similar just a little more cryptic.
Regards
tim
Similar Messages
-
After starting my MIDP application in debug mode, I receive an error from POSE as soon as the debugger (Eclipse) connects to it:
Palm OS Emulator
JavaHQ[1.0] just read from memory location 0x00075889, causing an address
error.
An "address error" means that the application accessed a 2- or 4-byte value
at an odd (i.e. not even) memory address.
I am otherwise able to compile, preverify, and run the test application
using Eclipse and the Wireless Toolkit with no problem.
The command I use to start the program in debug mode (on Windows XP) is:
cd \wtk104\bin
emulator -Djava.compiler=NONE -Xdevice:PalmOS_Device -Xheapsize:120k -Xdebug -Xrunjdwp:transport=dt_socket,address=4200,server=y -Xdescriptor c:\MyProject\myproject.jad
Has anybody have experience with this?
Can anybody help me understand the underlying mechanism for debugging on
POSE using the Wireless Toolkit? I know that the toolkit doesn't use any of the built-in POSE debugging capabilities. Somehow the above command starts POSE, starts the JavaHQ VM (even if it is not installed on the POSE!), starts the application, and waits for a connection from the debugger. Any detailed information on how this works would be much appreciated.
Thanks,
PaulI had the same problem...
If you had sloved this problem, could you give me a hand�H
My e-mail address: [email protected]
Regard -
Multiple a/c assgt SRM PO - Error in process
Hi all,
SRM 5.0 SP 12 ecs
When I create a purchase order with mutliple a/cassignment in SRM and order it,it gets replicated to ECC with the indicators "Confirmation-Related Invoice Verification" and "Confirm Performance of Service/Goods Receipt " checked as per the vendor master.
However if I change these indicators in this PO,the PO is set to "Error in Process" and then on ECC side,I see the error "Goods receipt posted unvaluated due to multiple account assignment".
How do i process this PO further in SRM ???
Thanks.Hi ,
I have checked it intially and both are identical.
Initialy the problem was, user had entered 128 times AA line items ( added & deleted ) in the PO while in the SC it was having only 64.... Our system accepts line items till 99 , so i asked him to delete the items above 99 ..
So after that POs error has gone and it went for approval..
But after approval it again went into error in process
Sheetal -
PO Error in Process with Multiple account assignment
Hi ,
I am working with Extended Classsic scenario.
Problem is with PO with Multiple account assignement.
There is only one user who is getting problem with one particular account assignement "CCC" - Cost Center RP.. . When PO gets created with this particular AAC , it goes into "Error in process" only for one user.
In RZ20 it shows messsage as "Please enter quantity or percentage for account assignment" & "Distr. ind. and partial invoice ind. must be set f or multi acct. assgt.".
On other hand , other users are able to order the PO with the same AAC without any error.
What could be the reason behind this only for one user ?
Regards,
SheetalHi ,
I have checked it intially and both are identical.
Initialy the problem was, user had entered 128 times AA line items ( added & deleted ) in the PO while in the SC it was having only 64.... Our system accepts line items till 99 , so i asked him to delete the items above 99 ..
So after that POs error has gone and it went for approval..
But after approval it again went into error in process
Sheetal -
Error -3259 241.6 of 241.7
I have Version 9. of Itunes which can't index my large collection of music but that is a different problem. The bigger problem is I download 241.6 of the 241.7 megs. THIS IS A HUGE FILE!!!! I have made multiple attempts. When I get there, I get this POS error stating.
"There was a problem downloading the software for the iPhone "BLA BLA". The network connection timed out. Make sure your network settings are correct and you network connection is active, or try again later.
Mark
< Edited by Host >Cardguys3 wrote:
A reply to my concern was moderated out. That's just swell. What a great way to keep a customer showing genuine concern for the lack of functionality! Can anyone help with some other solution besides dropping my firewall which I have done and still I can't finish this download. The other half is I am not sure if this constitutes a breech in contract. I am unable to update my phone which is a user-end obligation.
YOUR THOUGHTS?
You do realize you're not talking to Apple here, right? We're volunteers here, and aren't obligated to help you or anyone else for that matter.
Deggie's giving you good advice--use it! Answering those questions moves us one step closer to figuring out what's going wrong.
~Lyssa -
Sequence Update not working?
Hi
I've recently set up Sequence replication.
This is what I did (I already had GG installed and everything configured)
On source and target:
SQL> @sequence.sql
Please enter the name of a schema for the GoldenGate database objects:
GGS_OWNER
Setting schema name to GGS_OWNER
UPDATE_SEQUENCE STATUS:
Line/pos Error
No errors No errors
GETSEQFLUSH
Line/pos Error
No errors No errors
SEQTRACE
Line/pos Error
No errors No errors
REPLICATE_SEQUENCE STATUS:
Line/pos Error
No errors No errors
STATUS OF SEQUENCE SUPPORT
SUCCESSFUL installation of Oracle Sequence Replication supportThen on source only:
GGSCI (something) 79> start mgr
Manager started.
GGSCI (something) 80> start e*
Sending START request to MANAGER ...
EXTRACT EXT1 starting
GGSCI (something) 81> flush sequence schema1.*
Successfully flushed 11 sequence(s) SCHEMA1.*
GGSCI (something) 82> flush sequence schema2.*
Successfully flushed 34 sequence(s) SCHEMA2.*
GGSCI (something) 83> start *
Sending START request to MANAGER ...
EXTRACT DPUMP starting
Sending START request to MANAGER ...
EXTRACT EXT1 starting
Sending START request to MANAGER ...
REPLICAT REPSTB startingThe GG user, dblogin and everything related to GG uses the same DB user, so no grants required.
The sequences are not getting updated on the target, any idea?
Greetings,
N KThe issue was missing mapping line on pump.
D'oh. -
Recompile with -Xlint:unchecked for details???
hi friends ,
im using jdk-6-windows-i586. and apache-tomcat-5.5.26.
In development phase i got the following error while compiling
BeerExpert.java file. This is my model.
Note: BeerExpert.java uses unchecked or unsafe operations.
Note: Recompile with -Xlint:unchecked for details.
But the class file is created. Is this any type of error or just warning msg.
What is the meaning of this and what to do for it.
Then I recompile the file with javac -Xlint BeerExpert.java or javac -Xlint:unchecked BeerExpert.java
and the warning msg. appered as-
BeerExpert.java:9: warning: [unchecked] unchecked call to add(E) as a member of the raw type java.util.List
brands.add("Jack Amber");
error pos::: ^ error or warning position pointed by compiler
4 warnings
my source code is-
package com.example.model;
import java.util.*;
public class BeerExpert {
public List getBrands(String color) {
List brands = new ArrayList();
if(color.equals("amber")) {
brands.add("Jack Amber");
brands.add("Red Moose");
else {
brands.add("Jail Pale Ale");
brands.add("Gout Stout");
return(brands);
Any suggestions what to do? Please..
Thanx in advance.hi i have the same problem but my compiler is different
it says note: stream.java uses or overrides depricated API
recompile with XLINT:deprication for details
@echo off
:def
color 0F
:main
cls
title irans's Perfect Compiler
echo :::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::
echo :: Welcome to the ultimate Serverbatch!
echo ::
echo :: Choose one of the options below by entering
echo :: the corrensponding letter and pressing enter.
echo ::
echo :: Need a batch file created?
echo :: http://www.Moparscape.org/smf.
echo :::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::
echo :::: Main options:
echo :::: com = Compile your server.
echo :::: run = Run your server.
echo :::: aur = Runs your server with autorestart.
echo :::: bac = Backup your server files.
echo ::::
echo :::: Other options;
echo :::: set = Change settings.
echo :::: loc = Location list (co-ordinates)
echo :::: upd = Updates
echo :::: cmd = Command generator
echo :::: cre = Credits
echo :::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::
echo ::
set /p mainc=:: Choice:
if %mainc%==com goto com
if %mainc%==run goto run
if %mainc%==aur goto aur
if %mainc%==bac goto bac
if %mainc%==set goto set
if %mainc%==loc goto loc
if %mainc%==upd goto upd
if %mainc%==cmd goto cmd
if %mainc%==cre goto cre
if %mainc%==COM goto com
if %mainc%==RUN goto run
if %mainc%==AUR goto aur
if %mainc%==BAC goto bac
if %mainc%==SET goto set
if %mainc%==LOC goto loc
if %mainc%==UPD goto upd
if %mainc%==CMD goto cmd
if %mainc%==CRE goto cre
goto main
:com
cls
title Compiling...
echo :: Preparing for compile...
echo :: Auto-setting envriomental variables...
echo ::
goto com2
:com2
title Compiling...
echo :: Scanning for latest JDK version...
echo ::
IF EXIST "%programfiles%\JAVA\JDK1.6.0_10\BIN" (GOTO COM10)
IF EXIST "%programfiles%\JAVA\JDK1.6.0_09\BIN" (GOTO COM09)
IF EXIST "%programfiles%\JAVA\JDK1.6.0_08\BIN" (GOTO COM08)
IF EXIST "%programfiles%\JAVA\JDK1.6.0_07\BIN" (GOTO COM07)
IF EXIST "%programfiles%\JAVA\JDK1.6.0_06\BIN" (GOTO COM06)
IF EXIST "%programfiles%\JAVA\JDK1.6.0_05\BIN" (GOTO COM05)
IF EXIST "%programfiles%\JAVA\JDK1.6.0_04\BIN" (GOTO COM04)
IF EXIST "%programfiles%\JAVA\JDK1.6.0_03\BIN" (GOTO COM03)
IF EXIST "%programfiles%\JAVA\JDK1.6.0_02\BIN" (GOTO COM02)
IF EXIST "%programfiles%\JAVA\JDK1.6.0_01\BIN" (GOTO COM01)
goto comerrorxxx
:COM10
echo :: Found JDK 1.6.0_10
SET CLASSPATH=Files\Java\jdk1.6.0_10\bin;%CLASSPATH%;
SET PATH=C:\Program Files\Java\jdk1.6.0_10\bin
echo :: Results:
javac *.java
echo :: Done!
pause
goto main
:COM09
echo :: Found JDK 1.6.0_09
SET CLASSPATH=Files\Java\jdk1.6.0_09\bin;%CLASSPATH%;
SET PATH=C:\Program Files\Java\jdk1.6.0_09\bin
echo :: Results:
javac *.java
echo :: Done!
pause
goto main
:COM08
echo :: Found JDK 1.6.0_08
SET CLASSPATH=Files\Java\jdk1.6.0_08\bin;%CLASSPATH%;
SET PATH=C:\Program Files\Java\jdk1.6.0_08\bin
echo :: Results:
javac *.java
echo :: Done!
pause
goto main
:COM07
echo :: Found JDK 1.6.0_07
SET CLASSPATH=Files\Java\jdk1.6.0_07\bin;%CLASSPATH%;
SET PATH=C:\Program Files\Java\jdk1.6.0_07\bin
echo :: Results:
javac *.java
echo :: Done!
pause
goto main
:COM06
echo :: Found JDK 1.6.0_06
SET CLASSPATH=Files\Java\jdk1.6.0_06\bin;%CLASSPATH%;
SET PATH=C:\Program Files\Java\jdk1.6.0_06\bin
echo :: Results:
javac *.java
echo :: Done!
pause
goto main
:COM05
echo :: Found JDK 1.6.0_05
SET CLASSPATH=Files\Java\jdk1.6.0_05\bin;%CLASSPATH%;
SET PATH=C:\Program Files\Java\jdk1.6.0_05\bin
echo :: Results:
javac *.java
echo :: Done!
pause
goto main
:COM04
echo :: Found JDK 1.6.0_04
SET CLASSPATH=Files\Java\jdk1.6.0_04\bin;%CLASSPATH%;
SET PATH=C:\Program Files\Java\jdk1.6.0_04\bin
echo :: Results:
javac *.java
echo :: Done!
pause
goto main
:COM03
echo :: Found JDK 1.6.0_03
SET CLASSPATH=Files\Java\jdk1.6.0_03\bin;%CLASSPATH%;
SET PATH=C:\Program Files\Java\jdk1.6.0_03\bin
echo :: Results:
javac *.java
echo :: Done!
pause
goto main
:COM2
echo :: Found JDK 1.6.0_02
SET CLASSPATH=Files\Java\jdk1.6.0_02\bin;%CLASSPATH%;
SET PATH=C:\Program Files\Java\jdk1.6.0_02\bin
echo :: Results:
javac *.java
echo :: Done!
pause
goto main
:COM01
echo :: Found JDK 1.6.0_01
SET CLASSPATH=Files\Java\jdk1.6.0_01\bin;%CLASSPATH%;
SET PATH=C:\Program Files\Java\jdk1.6.0_01\bin
echo :: Results:
javac *.java
echo :: Done!
pause
goto main
:COMERRORXXX
echo :: No version of JDK 1.6 was detected.wtf impossible
pause
goto main
:run
cls
title Running Server...
echo :: Port:
echo :: 43594
IF EXIST "%programfiles%\JAVA\JDK1.6.0_10\BIN" (GOTO RUN10)
IF EXIST "%programfiles%\JAVA\JDK1.6.0_09\BIN" (GOTO RUN09)
IF EXIST "%programfiles%\JAVA\JDK1.6.0_08\BIN" (GOTO RUN08)
IF EXIST "%programfiles%\JAVA\JDK1.6.0_07\BIN" (GOTO RUN07)
IF EXIST "%programfiles%\JAVA\JDK1.6.0_06\BIN" (GOTO RUN06)
IF EXIST "%programfiles%\JAVA\JDK1.6.0_05\BIN" (GOTO RUN05)
IF EXIST "%programfiles%\JAVA\JDK1.6.0_04\BIN" (GOTO RUN04)
IF EXIST "%programfiles%\JAVA\JDK1.6.0_03\BIN" (GOTO RUN03)
IF EXIST "%programfiles%\JAVA\JDK1.6.0_02\BIN" (GOTO RUN02)
IF EXIST "%programfiles%\JAVA\JDK1.6.0_01\BIN" (GOTO RUN01)
:RUN10
echo :: Running using JDK 1.6.0_10...
SET CLASSPATH=Files\Java\jdk1.6.0_10\bin;%CLASSPATH%;
SET PATH=C:\Program Files\Java\jdk1.6.0_10\bin
java -Xmx1024m -cp .;./jython.jar;./MySql/mysql-connector-java-3.0.17-ga-bin.jar server
echo :: Failed!
pause
goto main
:RUN09
echo :: Running using JDK 1.6.0_09...
SET CLASSPATH=Files\Java\jdk1.6.0_09\bin;%CLASSPATH%;
SET PATH=C:\Program Files\Java\jdk1.6.0_09\bin
java -Xmx1024m -cp .;./jython.jar;./MySql/mysql-connector-java-3.0.17-ga-bin.jar server
echo :: Failed!
pause
goto main
:RUN08
echo :: Running using JDK 1.6.0_08...
SET CLASSPATH=Files\Java\jdk1.6.0_08\bin;%CLASSPATH%;
SET PATH=C:\Program Files\Java\jdk1.6.0_08\bin
java -Xmx1024m -cp .;./jython.jar;./MySql/mysql-connector-java-3.0.17-ga-bin.jar server
echo :: Failed!
pause
goto main
:RUN07
echo :: Running using JDK 1.6.0_07...
SET CLASSPATH=Files\Java\jdk1.6.0_07\bin;%CLASSPATH%;
SET PATH=C:\Program Files\Java\jdk1.6.0_07\bin
java -Xmx1024m -cp .;./jython.jar;./MySql/mysql-connector-java-3.0.17-ga-bin.jar server
echo :: Failed!
pause
goto main
:RUN06
echo :: Running using JDK 1.6.0_06...
SET CLASSPATH=Files\Java\jdk1.6.0_06\bin;%CLASSPATH%;
SET PATH=C:\Program Files\Java\jdk1.6.0_06\bin
java -Xmx1024m -cp .;./jython.jar;./MySql/mysql-connector-java-3.0.17-ga-bin.jar server
echo :: Failed!
pause
goto main
:RUN05
echo :: Running using JDK 1.6.0_05...
SET CLASSPATH=Files\Java\jdk1.6.0_05\bin;%CLASSPATH%;
SET PATH=C:\Program Files\Java\jdk1.6.0_05\bin
java -Xmx1024m -cp .;./jython.jar;./MySql/mysql-connector-java-3.0.17-ga-bin.jar server
echo :: Failed!
pause
goto main
:RUN04
echo :: Running using JDK 1.6.0_04...
SET CLASSPATH=Files\Java\jdk1.6.0_04\bin;%CLASSPATH%;
SET PATH=C:\Program Files\Java\jdk1.6.0_04\bin
java -Xmx1024m -cp .;./jython.jar;./MySql/mysql-connector-java-3.0.17-ga-bin.jar server
echo :: Failed!
pause
goto main
:RUN03
echo :: Running using JDK 1.6.0_03...
SET CLASSPATH=Files\Java\jdk1.6.0_03\bin;%CLASSPATH%;
SET PATH=C:\Program Files\Java\jdk1.6.0_03\bin
java -Xmx1024m -cp .;./jython.jar;./MySql/mysql-connector-java-3.0.17-ga-bin.jar server
echo :: Failed!
pause
goto main
:RUN02
echo :: Running using JDK 1.6.0_02...
SET CLASSPATH=Files\Java\jdk1.6.0_03\bin;%CLASSPATH%;
SET PATH=C:\Program Files\Java\jdk1.6.0_03\bin
java -Xmx1024m -cp .;./jython.jar;./MySql/mysql-connector-java-3.0.17-ga-bin.jar server
echo :: Failed!
pause
goto main
:RUN01
echo :: Running using JDK 1.6.0_01...
SET CLASSPATH=Files\Java\jdk1.6.0_03\bin;%CLASSPATH%;
SET PATH=C:\Program Files\Java\jdk1.6.0_03\bin
java -Xmx1024m -cp .;./jython.jar;./MySql/mysql-connector-java-3.0.17-ga-bin.jar server
echo :: Failed! Need JDK 1.6.0_xx
pause
cls
goto main
:bac
:backup
cls
title Backing up files...
echo :: Backing up files...
if not exist Backup mkdir Backup
if not exist Backup\characters mkdir Backup\characters
if not exist Backup\connectedFrom mkdir Backup\connectedFrom
if not exist Backup\data mkdir Backup\data
if not exist Backup\flagged mkdir Backup\flagged
if not exist Backup\logs mkdir Backup\logs
if not exist Backup\moreinfo mkdir Backup\moreinfo
if not exist Backup\savedGames mkdir Backup\savedGames
Echo Starting Backup Copy
copy /V /Y /A *.txt .\Backup\
copy /V /Y /A *.java .\Backup\
copy /V /Y /A *.class .\Backup\
copy /V /Y /A *.cfg .\Backup\
copy /V /Y /A *.bat .\Backup\
copy /V /Y /A bans .\Backup\bans
copy /V /Y /A characters .\Backup\characters
copy /V /Y /A characters .\Backup\characters
copy /V /Y /A connectedFrom .\Backup\connectedFrom
copy /V /Y /A data .\Backup\data
copy /V /Y /A flagged .\Backup\flagged
copy /V /Y /A logs .\Backup\logs
copy /V /Y /A moreinfo .\Backup\moreinfo
copy /V /Y /A savedGames .\Backup\savedGames
echo :: Done.
pause
cls
goto main
:set
cls
echo :: Enter one of the following to change background colour.
echo :: B0 = Black
echo :: B1 = Blue
echo :: B2 = Green
echo :: B3 = Cyan
echo :: B4 = Red
echo :: B5 = Purple
echo :: B6 = Yellow
echo :: B7 = White
echo.
echo :: Enter one of the following to change text colour.
echo :: T0 = Black
echo :: T1 = Blue
echo :: T2 = Green
echo :: T3 = Cyan
echo :: T4 = Red
echo :: T5 = Purple
echo :: T6 = Yellow
echo :: T7 = White
set /p s=:: Choice:
if %s%== B0 (set b=0)
if %s%== B1 (set b=1)
if %s%== B2 (set b=2)
if %s%== B3 (set b=3)
if %s%== B4 (set b=4)
if %s%== B5 (set b=5)
if %s%== B6 (set b=6)
if %s%== B7 (set b=F)
if %s%== T0 (set t=0)
if %s%== T1 (set t=1)
if %s%== T2 (set t=2)
if %s%== T3 (set t=3)
if %s%== T4 (set t=4)
if %s%== T5 (set t=5)
if %s%== T6 (set t=6)
if %s%== T7 (set t=F)
color %b%%t%
pause
cls
goto main
:loc
cls
echo :: Below is a list of locations with their coordinates.
echo ::
echo :: Varrock - 3210 3424
echo :: Falador - 2964 3378
echo :: Lumbridge - 3222 3218
echo :: Camelot - 2757 3477
echo :: East Ardougne 2662 3305
echo :: West Ardougne 2529 3307
echo :: Al Kharid 3293 3174
echo :: Khalphite Lair 3226 3107
echo :: Yannille 2606 3093
echo :: Tutorial Island 3094 3107
echo :: Barbarian Village 3082 3420
echo :: Entrana 2834 3335
echo :: Heroes Guild 2902 3510
echo :: Rangers Guild 2658 3439
echo :: Catherby 2813 3447
echo :: Seers Village 2708 3492
echo :: Fishing Guild 2603 3414
echo :: Isafdar 2241 3238
pause
cls
goto main
:upd
cls
echo :::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::
echo :: Latest updates:
echo ::
echo :: 1) Added Location list.
echo :: 2) Fixed backup commands.
echo :: 3) Added settings option.
echo :: 4) Fixed backup to cover more file types.
echo :: 5) Added autorestarter. This was incredibly difficult for me to do.
echo :: 6) Added command generator.
echo :: 7) Auto-sets enviromental variables when compiling.
echo :: 8) Released On Mopar Forums
echo :::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::
pause
cls
goto main
:cmd
:Star
Set /p CmdName=Command Input?
Set /p RUSure=Are you sure you want the commands input: %CmdName%(yes,no)?
If %RUSure%==no GOTO Star
If not Exist CommandsFolder MD Commands Folder
Echo else if(command.equalsignorecase("%CmdName%")) >> ".\Commands\%CmdName% Command.txt"
Echo { >> ".\Commands\%CmdName% Command.txt"
cls
set /p AY=addItem(yes,no)?
If %AY%==YES Goto addItem
If %AY%==yes Goto addItem
If %AY%==no Goto endCode
If %AY%==NO Goto endCode
:addItem
cls
set /p ID=ItemID?
cls
set /p Amount=Amount Of that Item?
cls
echo addItem(%ID%,%Amount%); >> ".\Commands\%CmdName% Command.txt"
Set /P AT=Add item, add tele or finish command.(AI,T,End)
If %AT%==ai GOTO addItem
If %AT%==Ai GOTO addItem
If %AT%==AI GOTO addItem
If %AT%==aI GOTO addItem
If %AT%==T GOTO Tele
If %AT%==t GOTO Tele
If %AT%==end GOTO endCode
If %AT%==END GOTO endCode
If %AT%==EnD GOTO endCode
If %AT%==eNd GOTO endCode
If %AT%==ENd GOTO endCode
If %AT%==enD GOTO endCode
if %AT%==End Goto endcode
if %type%==* goto error
echo.
goto error
:error
cls
echo Commands invalid. Only use commands from the menu.
pause
goto menu
:endCode
cls
Echo } >> ".\Commands\%CmdName% Command.txt"
Set /p Again=Make Another (yes, No)?
If %Again%==yes GOTO Star
If %Again%==no goto fin
If %Again%==YES GOTO Star
If %Again%==NO goto fin
:Tele
cls
Set /P X=XCoord Tele?
Set /P Y=YCoord Tele?
Echo teleportToX = %X% >> ".\Commands\%CmdName% Command.txt"
Echo teleportToY = %Y% >> ".\Commands\%CmdName% Command.txt"
Set /P AT=addItem Or Another Tele(not Used In Same Command Usually(AI,T,End)
If %AT%==ai GOTO addItem
If %AT%==Ai GOTO addItem
If %AT%==AI GOTO addItem
If %AT%==aI GOTO addItem
If %AT%==T GOTO Tele
If %AT%==t GOTO Tele
If %AT%==end GOTO endCode
If %AT%==END GOTO endCode
If %AT%==EnD GOTO endCode
If %AT%==eNd GOTO endCode
If %AT%==ENd GOTO endCode
If %AT%==enD GOTO endCode
if %AT%==End Goto endcode
:fin
echo Command creation complete. Find it in the commands folder.
pause
cls
goto main
:aur
cls
echo :: Have you already set up your autorestarter? (Y/N)
set /p ans=:: Answer:
if %ans%==y goto ansyes
if %ans%==n goto ansno
goto main
:ansyes
cls
call autorestart.bat
echo Not Found!
pause
goto main
:ansno
cls
echo :: How long between auto restarts?
set /p hlb=:: (10min, 12min, 14min, 16min, 18min, 20min):
if %hlb%==10min goto min10
if %hlb%==12min goto min12
if %hlb%==14min goto min14
if %hlb%==16min goto min16
if %hlb%==18min goto min18
if %hlb%==20min goto min20
:min10
del ProcessKiller.bat
del Autorestart.bat
del Runner.bat
echo :start >> ProcessKiller.bat
echo PING 1.1.1.1 -n 1 -w 600000 >> ProcessKiller.bat
echo tskill java >> ProcessKiller.bat
echo start call runner >> ProcessKiller.bat
echo goto start >> ProcessKiller.bat
echo java -Xmx1024m -cp .;./jython.jar;./MySql/mysql-connector-java-3.0.17-ga-bin.jar server >> Runner.bat
echo exit >> Runner.bat
echo @echo off >> Autorestart.bat
echo :start >> Autorestart.bat
echo Start call "Runner.bat" >> Autorestart.bat
echo call "ProcessKiller.bat" >> Autorestart.bat
echo pause >> Autorestart.bat
echo goto start >> Autorestart.bat
goto donexd
:min12
del ProcessKiller.bat
del Autorestart.bat
del Runner.bat
echo :start >> ProcessKiller.bat
echo PING 1.1.1.1 -n 1 -w 720000 >> ProcessKiller.bat
echo tskill java >> ProcessKiller.bat
echo start call runner >> ProcessKiller.bat
echo goto start >> ProcessKiller.bat
echo java -Xmx1024m -cp .;./jython.jar;./MySql/mysql-connector-java-3.0.17-ga-bin.jar server >> Runner.bat
echo exit >> Runner.bat
echo @echo off >> Autorestart.bat
echo :start >> Autorestart.bat
echo Start call "Runner.bat" >> Autorestart.bat
echo call "ProcessKiller.bat" >> Autorestart.bat
echo pause >> Autorestart.bat
echo goto start >> Autorestart.bat
goto donexd
:min14
del ProcessKiller.bat
del Autorestart.bat
del Runner.bat
echo :start >> ProcessKiller.bat
echo PING 1.1.1.1 -n 1 -w 840000 >> ProcessKiller.bat
echo tskill java >> ProcessKiller.bat
echo start call runner >> ProcessKiller.bat
echo goto start >> ProcessKiller.bat
echo java -Xmx1024m -cp .;./jython.jar;./MySql/mysql-connector-java-3.0.17-ga-bin.jar server >> Runner.bat
echo exit >> Runner.bat
echo @echo off >> Autorestart.bat
echo :start >> Autorestart.bat
echo Start call "Runner.bat" >> Autorestart.bat
echo call "ProcessKiller.bat" >> Autorestart.bat
echo pause >> Autorestart.bat
echo goto start >> Autorestart.bat
goto donexd
:min16
del ProcessKiller.bat
del Autorestart.bat
del Runner.bat
echo :start >> ProcessKiller.bat
echo PING 1.1.1.1 -n 1 -w 960000 >> ProcessKiller.bat
echo tskill java >> ProcessKiller.bat
echo start call runner >> ProcessKiller.bat
echo goto start >> ProcessKiller.bat
echo java -Xmx1024m -cp .;./jython.jar;./MySql/mysql-connector-java-3.0.17-ga-bin.jar server >> Runner.bat
echo exit >> Runner.bat
echo @echo off >> Autorestart.bat
echo :start >> Autorestart.bat
echo Start call "Runner.bat" >> Autorestart.bat
echo call "ProcessKiller.bat" >> Autorestart.bat
echo pause >> Autorestart.bat
echo goto start >> Autorestart.bat
goto donexd
:min18
del ProcessKiller.bat
del Autorestart.bat
del Runner.bat
echo :start >> ProcessKiller.bat
echo PING 1.1.1.1 -n 1 -w 1080000 >> ProcessKiller.bat
echo tskill java >> ProcessKiller.bat
echo start call runner >> ProcessKiller.bat
echo goto start >> ProcessKiller.bat
echo java -Xmx1024m -cp .;./jython.jar;./MySql/mysql-connector-java-3.0.17-ga-bin.jar server >> Runner.bat
echo exit >> Runner.bat
echo @echo off >> Autorestart.bat
echo :start >> Autorestart.bat
echo Start call "Runner.bat" >> Autorestart.bat
echo call "ProcessKiller.bat" >> Autorestart.bat
echo pause >> Autorestart.bat
echo goto start >> Autorestart.bat
goto donexd
:min20
del ProcessKiller.bat
del Autorestart.bat
del Runner.bat
echo :start >> ProcessKiller.bat
echo PING 1.1.1.1 -n 1 -w 1200000 >> ProcessKiller.bat
echo tskill java >> ProcessKiller.bat
echo start call runner >> ProcessKiller.bat
echo goto start >> ProcessKiller.bat
echo java -Xmx1024m -cp .;./jython.jar;./MySql/mysql-connector-java-3.0.17-ga-bin.jar server >> Runner.bat
echo exit >> Runner.bat
echo @echo off >> Autorestart.bat
echo :start >> Autorestart.bat
echo Start call "Runner.bat" >> Autorestart.bat
echo call "ProcessKiller.bat" >> Autorestart.bat
echo pause >> Autorestart.bat
echo goto start >> Autorestart.bat
goto donexd
:donexd
echo :: Autorestart configuration is complete. Choose 'y' at the menu.
pause
cls
goto aur
goto main
:cre
cls
echo :::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::
echo :: Thanks you for using irans's ultimate Serverbatch!
echo ::
echo :: Thanks to:
echo :: iran4life
echo ::
echo :: And you, if you have decided to use this
echo :: instead of a different serverbatch (compiler).
echo :::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::
pause
cls
goto main
for some reason when i compile it says note: stream.java uses or overrides depricated API
recompile with XLINT:deprication for details
is there any errors ?
help plz ive been trying for weeks and i went to ur link and still couldnt find...
Edited by: imascape on Nov 5, 2008 8:18 PM -
?I never thought I'd experience the dreaded "POS" error with a Creative product, but after a mere ONE WEEK with my new GB Stone, the thing has apparently failed irretrievably [hope not!]. I was listening to tunes on a full charge when? the player suddenly stopped. I turned it back on and it stopped again after 30 seconds or so. This is definitely NOT a battery life issue, a fact confirmed by the green flashing LED during several attempted restarts [and my own memory of having just finished charging the thing]. I tried the RESET button, which only made things worse. Now, the player will not play at all. You can turn it on, but it never starts playing, and the only way to power off is to hit RESET. This is quite annoying. I never d-loaded any drivers or apps, since WinXP had no initial problems seeing the unit [even listed it as ZEN STONE in Explorer]. As I said, I'd been copying files to it and enjoying the player for a week before this error state was encountered. Is there a way to flash this thing back to its original state? I don't care about the files on it--they can always be recopied.
I like the fact that the Stone only cost 40 bucks, but that's a bit steep for a one-week only disposable....Message Edited by zoroastr on 07-07-200707:58 PM
Message Edited by zoroastr on 07-07-200707:58 PMhey guys...finally i'm glad to see ppl widsimilar issue...
well i am facin d same problem and my computer is not able to read d files in my craeti've zen stone,,,and says d files r
corrupted...
so i read bout..recovery...but anybody readin dis will plz guide me how do i go bout doin dis...
thanxx... -
Error while activating POS - Message /SAPAPO/TSM154
Hi,
We have installed SCM 2007 in our landscape recently. We are facing problem in Activating the standard POS objects like 9ADPBAS, 9ASNPBAS etc., we get error as " Planning Object Structure is invalid".
We tried to create a new MPOS in the system, but can not activate the same. We get error message /SAPAPO/TSM154. In Service Marketplace we have a note 1152453 for this kind of error, but while implementing we again get error stating "Cannot be implemented". Diagonsis states " SAP Note does not contain valid correction instructions".
Have anyone faced similar problems? Please help us out.
Thanks,
Rajesh ManoharanHi,
Thanks for the reply.
I tried to use the report "/SAPAPO/TS_PSTRU_GEN" to check, but it gives Generation Error when I run it. No diagonsis attached to that error.
When I tried to use the transaction and check for inconsistency, it says the POS is not active.
Please give me more pointers to check.
Regards,
Rajesh Manoharan -
"Error in Process" for POs after changing Tax codes and Vendor address
All,
We are in extended classic scenario and we have 2 POs with status "Error in Process"
PO 1:
The PO was ordered with 3 line items, Confirmed, Inovoiced. Later our accoutnig team realized there should not be tax for one of the line item in the PO. So they created Credit memo and asked our purchasing dept. to change PO from Taxable to Tax except.
Now the porblem is, when PO chages to tax except in SRM, it is going to "Error in Process".
What could be the reason?
PO 2:
The PO have 10 line items and Confirmed, No invoice is generated.
Now the Purchsing want to change vendor address in the PO, they changed the vendor address in the PO.
Now the porblem is, when PO changes in SRM, it is going to "Error in Process".
I checked the RZ20 Traansaction in SRM, both POs have same errors:
Backend application errors "Indicator for GR-based invoice verification used not allowed"*
We removed 'Confirm Performance of Service/Goods Receipt' tick mark for the PO in SRM under follow on documents and it is throwing error saying it must be checked.
Did any one got this error, what i need to check for this errors?. any help?
Thanks
RamsHi,
Once the PO is created . Confirmation made and invoice .Tax change will not be allowed.
First reverse the Invoice.
Cancel the confirmation
then change in the P.O
Do the Confirmation and invoice it will allow
Regards
G.Ganesh Kumar -
Delivery Date error while creating/uploading POs using LSMW
Hi,
I am facing problem in creating POs using LSMW. I am using direct input method with standard object 0085 for PO upload. But I am facing problem because of delivery date in the PO. There are basically two errors that I am getting:
1) When the delivery date format is DDMMYYYY in the fileto be uploaded, the error that i get is "Please enter a valid delivery date"(Message No..ME 077)
2) When the delivery date format is YYYYMMDD in the file to be uploaded, the error that i get isFor the K4 fiscal year variant, no period is defined for . .(Mesage no. F5 275)
Please let me know how to rectify these errors.
Thanks in advance.....Hi,
You need to rectify the issue by applying attached corrections in SAP Note 1094336 - Error message F5 275 if requirement date is deleted.
Summary
Symptom
The "Requirement date" field (EBAN-BADAT) was set to changeable in the the field selection. If the "Requirement date" field is deleted for a purchase requisition item, the system issues error message F5275 "For the xxx fiscal year variant, no period is defined for 00.00.0000".
You can leave the process only with /n.
Other terms
BADAT, requirement date, F5 275, EF5275, E F5 275
Reason and Prerequisites
Usability
Solution
Implement the program corrections.
Regards,
Sandesh Sawant -
Calling BAPI_PO_CHANGE in a loop, correct POs after faulty PO erroring out
Hello Gurus!
I have an issue while calling BAPI_PO_CHANGE.
I'm looping on BAPI_PO_CHANGE with Purchase Orders one by one, and adding articles to the existing POs. It works fine if additional articles are correct
The issue is, if one PO returns with error from BAPI_PO_CHANGE, because of say '0' quantity or 'Discontinued' status of an article, the remaining POs after faulty PO error out too. The remaining POs are correct and update correctly if executed separately.
I'm refreshing all required iTabs and program works fine in case the newly added articles are valid.
I'm calling BAPI_TRANSACTION_COMMIT in case BAPI returns with successful PO change. In case of faulty BAPI returning with error, I've tried using BAPI_TRANSACTION_ROLLBACK. But it doesn't work.
Here is the u2018error messageu2019 log:
Faulty PO:
Error processing PO: 60045904
Instance 60045904 of object type PurchaseOrder could not be changed
Purchase order still contains faulty items
Status "Discontinued" of article 1000182864 does not allow external procurement
Enter rate CAD / rate type M for 07/15/2011 in the system settings
Correct PO but gets erroru2019d out too:
Error processing PO: 60045909
Instance 60045909 of object type PurchaseOrder could not be changed
Enter rate CAD / rate type M for 07/15/2011 in the system settings
I'd appreciate any help.
Thank you,
FarooqHello Anuradha,
yes, I used the BAPI Commit command but it did not work.
Kind regards,
Erkan -
RedScreen!​!! – Factory Processing Error Occurred - HP rp5700 POS
Good day all,
Hope all is wel and that you can assist with this critical problem.
My HP rp5700 QuickBooks POS System completly crashed recently which HP kindly assisted with by sending new Recovery, Win 7 OS, WinDV Corel and Language CDs for re-installation.
Now that I'm trying to actually install (tried numerous times) all goes well until the very end when I get the following arror:
"RedScreen!!! – Factory Processing Error Occurred
FBI Error!
Summary: Failure spawning
C:\MICROSOFT_2009_MILESTONE3_FAILED.EXE
UIAInfo: 946, FBI PostOS processing error.
You must power down the system and restart the order."
Have anyone had a symilar exprerience and/or have had positive solution for this error please?
Would appreciate any input you can provide.
Regards,
Georges.If a supplemental disc is part of your restore set, don't use it. When you launch your restore one of the first questions you should be asked by the restore process is do you have a supplemental disc, answer that question NO. The reimage should then proceed and finish without the red screen error.
I was having the same issue when working on a machine for a customer and this is what fixed the issue for me.
Hopefully this works out well for other people running into this red screen!!
I am employed by HP
*** If my post helped you...click the KUDOS on the left to say THANKS! *** -
Error for ERS settlement of frieght POs
Hello All
We have an issue where user is trying to settle Automated Freight POs with search criteria as (company code US20) and GR posting date (From- Blank/ To - till date) through MRRL transaction.
Errors:
1.Posting date is initial for few of them
2."External system returned different number of lines than received" for remaining ones.
I tried the same in testing client by settling them in batches say for a month and then it did not give an error and were settled as desired.
Could anyone please help me on both errors. There is no long text available for the same.
Best Regardscan anyone please help or share knowledge on above errors?
-
12.1.1 PO Output for Communication errors all POs created after upgrade
Hi All -
We are in the middle of upgrade testing and have encountered a critical issue with "PO Output for Communication (POXPOPDF)." All POs created after the upgrade are completing with error. We are able to generate pdf output for POs generated in 11.5.10.2 before the upgrade. This error is occurring even with seeded "PO_STANDARD_XSLFO.xsl" template as well.
The log file has the following message towards the end.
getArchiveOn(): APPROVE
getArchiveOn()=APPROVE m_viewOrCommunicate=Communicate
getArchiveOn(): APPROVE
After calling genDocThu Jan 28 12:51:47 EST 2010
Adding the blob to vector
java.lang.NullPointerException
rolling back the complete program
PO is getting archived properly, so it is definitely an issue with document generation. We have had a SR logged for over three weeks, but there has been not much progress on this. Support has logged a new bug for this. We are unable to view bug transcript, so I am not certain as who is working this bug.
Any help or pointers will be much appreciated.
Thanks
AbhishekPl see if MOS Doc 433600.1 (PO Output for Communication Fails When Item Description Contains Special Characters) is relevant in your case. The error message is similar to your case.
HTH
Srini
Maybe you are looking for
-
Oracle Application Server 10g Cloning
Hi All, Could anyone please advice on How we can create a cloned copy of 10g AS(including infra DB) for DR purpose.Any document or guideline will be highly appreciated. Regards,
-
Dear All, As per current layout already printing / display below information . Name Already Printing Street/House Already Printing District Already Printing City Already Printing Regio
-
Problem in getting remote address?
Hi, I have a procedure on my login page, which reads user's IP address and stores it in a log file. I am using the following statement to get the IP address of remote user: select owa_util.get_cgi_env('REMOTE_ADDR') from dual; It is running fine on m
-
How to activate WWAN on Satellite T210
Hi! i have recently purchased TOSHIBA Satellite T210 and as i checked on the battery, i saw a SIM card slot..and i search it is a WWAN card slot. I want to know more about t and how to activate it... should i install another app to activate it? Becau
-
Installing Codfusion Mx 7 on windows XP
Hello, I have install the trial version of Coldfusion Mx 7.0. There is no error in the installation log file. The only options available to lauch programs in "All Programs\Macromedia\Coldfusion Mx7\" are to: 1- Start the Administrator page 2- Getting