1st full month of no 300Gb cap, has your usage inc...

Well, it’s the first full month of the 300Gb cap being removed.
Have you found your bandwidth use has increased drastically now?
For me ,
March   283Gb (Infinity install 7/3/11)
April   296Gb
May   326Gb (with 1 day to go)
It’s nice not having to worry about it but it’s not increased by as much as I thought it might.

Hi,
I'm unable to locate on the BT website my Usage History for April. Are we able to look at our usage, if yes where is it lol.
Before Infinity I was using around 40/50GB a month with O2.
My TBB Meter Tells me this:--
5th to 30th April 78GB
May 80GB
So yes my usage have increased a small amount but thats due to me now being able to us and watch live streaming without buffering as before.
Any way still very very happy Taff
iechyd da 
sky twitter account a customer ask why sky go streams are worst then sd and yet bt and eurosports apps stream in hd. Reply from mod, oh thats easy the files for hd are some huge that sky go can't play them and no app can stream hd due to this and so when they say they are they're really sd streams, if there was any way around this we would have done it now.

Similar Messages

  • I have the latest version of Abode Reader. However, over the past month or so, my Reader has constan

    I have the latest version of Adobe Acrobat Reader. I operate on Windows 7 with Outlook as my e-mail filter. However, over the past month or so, my Reader has constantly become "not responding" whenever I open-up a pdf file that was attached to an e-mail. When trying to read the pdf file, it doesn't allow me to scroll through the document and then goes into "not responding" mode which forces me to exist and then re-open the file many times until I have been able to read the documents. This "not responding" shut down to the pdf file is constant and very annoying. What is going on and how can I fix it?
         THanks,

    Thank you for your kind and thoughtful input.
    My Adobe reader is the most current one that's out there per Adobe.
    Something like XII  or higher.
    As for my Outlook, it's MS Outlook 2003, and I believe it's Express Outlook.
    If I disable the Protected Mode, per your suggestion, maybe that will work.
    I'll try it.
    Thanks again, and if you have any other ideas, I would appreciate your
    thoughts.
    Thank you.
    Joel

  • Calendar apps:  1. That my wife and I can share.  2. That shows some of the text in the full month view.  3.  That can have "public" events and "private" events.

    Hello All,
    I am looking for a calendar app that my wife and I can share on both of our iphones.  I am new to this and haven't found an app that will do what I want.
    1. I want the full month view to show some of the text of each event:  Like Pocket Informant and Monthly Calendar Mocha do (not just a dot).
    2. That both of us can post and see each other's events.
    3. That each of us can post "private" events that the other person won't see on their phone.  Things like, "Wife's surprise party."
    4. That sync's both calendars automatically.
    I know a lot of people use Fantastical, but I don't think that would give me the text in the full month view.
    Is there an app that can do all of the above?
    Thanks in advance.
    Rick

    Sharing and syncing is a feature of the calendar database; you can have multiple calendars, and each can be private, shared with specific other iCloud users, or public. If you have a Mac you can set that up in the Calendar app; for either Mac or Windows you can set it up by logging in to iCloud.com using your Apple ID.
    The other calendar apps all use the Apple calendar database; they just have different ways of presenting the content, and can also take advantage of "hidden" features of the Apple calendar database (such as adding icons to entries).

  • I bought my macbook pro 2 months a go..it has become very slow as i don't have movies etc. should i format my mac , please advice ???

    i bought my macbook pro 2 months a go..it has become very slow as i don't have movies etc. should i format my mac , please advice ???

    Have a read here...
    http://support.apple.com/kb/HT1147
    http://www.thexlab.com/faqs/maintainingmacosx.html
    http://www.thexlab.com/faqs/performance.html

  • My mother never opened/registered her AppleCare she bought 1 year ago. I was told I can't use her AppleCare for my 4s I got this month because a newer version has been released, she can't even use it herself. Is this true? Can she get a refund?

    My mother never opened/registered her AppleCare she bought 1 year ago. I was told I can't use her AppleCare for my 4s I got this month because a newer version has been released, she can't even use it herself. Is this true? Can she get a refund?

    Only one way to find out: call AppleCare.

  • Double charge full month of Family Plan which only used for 7 days  and full month of individual plan

    I changed from Family Plan to Individual Plan and I got only refund back $9.99 for one line that stay with Verizon but I got charged double both Family Plan and Individual Plan for full month without any credits for 23 days of unused Family Plan. ($120-discount Family Plan + $39.99-discount Individual Plan) per 1 month (from 06/07 to 07/06).
    I am asking the credit of unused 23 days of Family Plan back into my account when I changed from Family plan to Individual plan then I got the answer like this which I do not agree at all.
    "As the previous rep stated since the numbers were ported out the bill continued to bill until the end of the current bill cycle. This is the reason why there was no credit issued for the first month in advance. Had the numbers not been ported, and instead disconnected, there would have been a refund issued for any unused portion of the service"
    I never saw any clause saying that porting numbers would not get credit issued for any unused portion of the month billed in advance.
    I expected refund 23 days credit of the Family plan from 06/06 to 07/06 back to my account since the family plan supposed to be disconnected on 06/07 but because of porting time schedule from other carrier so that all 4 lines completely disconnected the service 1 week later which is on 06/13/2012 and only 1 line(my current number) left as individual plan as it planned originally 06/07.
    Family Plan with corporate discount: $120-$16 cisco discount/month------> each day is: $104/30 days= $3.46/day
                       23 days unused of Family Plan is : $3.46 x 23= $79.58
    I still expect missing credits into my account: $79.58-$9.99= $69.59.
    At the least if you want to take away the $16 discount for the last month of Family plan, then you still owe me the refund of ($69.59-$16)= $53.59

    verizonloyal wrote:
    You left out the next important sentence ..... If it is your intention to fool all other members, please correct it.
    This is the path for the whole thing:"Customer Agreement"
    http://www.verizonwireless.com/b2c/support/customer-agreement
    I am not a Prepaid customer and I will be entitled to a refund of unused charge from an advanced month charge. Any cancellation should honor that..I called the customer representative to ask in advance what happened when I plan to keep only one line and change to individual plan ,she assured me that I will get credits for any unused of Family Plan of the advanced month, the new Individual Plan charge will take over and I would not get double charge at all.
    I am the customer with Verizon very long time, more than 5 years and I can not believe that you charged me double like that.
    Please return me back my money.
    I am NOT trying to fool anyone. As with the sentence you highlighted, if what I highlighted ONLY pertained to prepaid customers, it would have indicated it in the sentence. Since it did not, it DOES NOT. Postpaid customers are NOT mentioned at all within the section about porting numbers. Are you saying since they are not mentioned that postpaid customers CANNOT port their numbers? Didn't think so. The entire paragraph is about ALL Verizon customers EXCEPT the sentence which specifically singles out prepaid customers. You are responsible for all charges until the end of the billing cycle from the point of porting, not from when you asked to be ported. Therefore you are responsible for the charges for the "Family Plan" until the end of the billing cycle.
    Unfortunately, you only left ONE phone on the account when you ported out your numbers. Therefore the single line could NOT have been left on a Family Plan, and was therefore migrated to an Individual Plan. AT MOST, you would be entitled to a prorated refund of the $9.99 access fee FOR THAT ONE LINE, since that line was not canceled due to the porting. However, you should ONLY be responsible for Individual Plan charges from the point your single line was migrated until the end of the billing cycle, NOT for an entire month of service. Of course, your bill would show that the following month was being charged, too, since Verizon charges a month in advance.
    While Verizon may refund you more money just to placate you, according to the CUSTOMER AGREEMENT, you are not entitled to it.
    Good luck.

  • Depreciation for full month

    Hi Friends.
    My client requirement is to provide the depreciation for the full month in the year of acquisitiona as well as sale.  For example, if an asset is acquired on 10th of a month, the system should calculate depreciation for the full month though the asset is not held during the first 10 days.  Similarly at the time of sale also.
    Your answers carry more weightage with good appreciation.
    Regards.
    Srini

    Hi,
    For this you have to set up:
    2 new period controle rule's     TC OAVS
    Define Calender Assignments  TC OAVH
    Maintain Period Control Methods TC AFAMP
    You have to assign this to your depreciation key TC AFAMA (perhaps a new depreciation key)
    It the depreciation key the the follow options should not be selected:
    Dep. to the day

  • Not full month depreciation

    Dear SAP Experts,
    We have a need to calculate the fixed assets depreciation - not for the full month, but just the last 3 weeks of it.
    For example,  we post the APC as of 01/07/11. We need to depreciate our fixed assets from 01/08/11 to 01/31/11 only instead of posting the full-month depreciation amounts. The depreciation for January 2011 should be:
    monthly depreciation amount/31 days in the month * 24 days (from 01/08/11 to 01/31/11 )
    The remaining depreciation periods should be the full amount based on the depreciation key and useful life.
    This is a one-time requirement and I was wondering what the easiest and automated way of doing it in FI-AA is.
    Please advise.
    Thank you in advance,
    Inna

    Hi Shayam,
    Thank you for your prompt response.
    Our company is going public and we have to post the fair market value of fixed assets to reflect the purchase accounting entries at a date which falls on e.g. 01/07/11. That's why we need to calculate the 3/4 of the monthly depreciation rate.
    If we cannot switch from daily to monthly depreciation back and forth, is posting the depreciation for the first week of month back manually the only solution for us? Or is there any better (or more SAP standard) way of doing that?
    Please advise.
    Thank you in advance,
    Inna

  • Have not purchased music for 10 months, in the meantime card has expired, which has £1.74 in credit on it, tried to change card details to current last 4 numbers/expiry date and security code but keeps on rejecting and brings back old card details

    Have not purchased music for 10 months, in the meantime card has expired, which has £1.74 in credit on it, tried to change card details to current last 4 numbers/expiry date and security code but keeps on rejecting and brings back old card details

    Try here >  iTunes Store: My credit card's security code or zip code does not match my bank's records

  • Next full month function

    Post Author: kimiko
    CA Forum: Formula
    Hi,
    I am new to Crystal, so I hope this question makes sense...
    I am trying to use a function to select the next full month based on the current date. The 'lastfullmonth' function works for me, but I need to obtain the next full month rather than last month. The 'next30days' function will not work because it does not include a full month. For example, today is November 27, and I need to view all of December. If I use 'next30days,' I will see the end of November and it will not reach to the end of December. Is there a function or formula to view the next full month?
    Thanks in advance!!!

    Post Author: yangster
    CA Forum: Formula
    this issue becomes a lot easier if you add the custom function cdlastdayofmonth and cdfirstdayofmonth from the repositorydatetimevar begin_date := cdfirstdayofmonth(dateadd("m", 1, currentdatetime);datetimevar end_date := cdlastdayofmonth(dateadd("m", 1, currentdatetime);your_date_field in begin_date to end_datesimply log into your repository, navigate to the date formulas and right click to add to report and you will be able to use the custom functionsthis can also be done with some manual date manipulations but its rather messy

  • I am having problems with the month of October.  When I have the full month view, the synced items from google calendars won't show.  But they do for all the other months.

    I am having problems with the month of October.  When I have the full month view, the synced items from google calendars won't show.  But they do for all the other months.  There is definitely a glitch somewhere because if I am on day view and try to click on day 15 of October, it will not let me.  It totally is acting weird.

    Free fonts, fonts from a reliable foundry?
    Have you tried removing them temporarily?
    Do you still have problems if you create a new Windows user account and log in with that? How about if you start in Safe Mode?
    And I would run a memory checker and see Troubleshoot font problems | Windows

  • Substruct 2 Dates and get full month difference

    HI,
    I have a start Date coming from a DB like 3/10/2006
    and I have the Date of today like 5/20/2006.
    I need to find the difference in full months between this 2
    dates???
    return should be like >TimeUsed.text = "3";
    Can someone help please?
    Thankyou

    Flash already knows the current date, so you could use
    something like:
    aDate="3/10/2006";
    TimeUsed.text = monthsBetween(toDate(aDate),new Date()));
    //followed by attached code
    If you are given both dates, from database....
    aDate="3/10/2006";
    bDate="5/20/2006";
    TimeUsed.text = monthsBetween(toDate(aDate),toDate(bDate));
    //followed by attached code

  • Getting Number of days full month in a selected period

    Now I want to know the Total number days full months in a selected time period.
    select period 1/02/2014 to 15/03/2014 ->28+31=59
    count
    (Descendants(
    [Время].[Год-Месяц-День].CurrentMember,
    [Время].[Год-Месяц-День].[Дата])) ->YMD-> 2014-365, 02-28,03-31
    How to achieve aggregation of the year
    59 days?

    VBA!DATEDIFF("d",[Time].[Y-M-D].CurrentMember,[Time].[Y-M-D].[date].membervalue)
    Does not work, gives an error
    CellOrdinal 0
    VALUE Error Number Query (3,
    1) Function MEMBERVALUE waits for
    argument 1 expression element.
    Expression levels were used.
    Query (1, 32) Runtime Error managed stored
    procedures DATEDIFF: Microsoft :: AnalysisServices :: AdomdServer :: AdomdException.
    FORMATTED_VALUE Error Number Query (3, 1)
    function waits for the argument MEMBERVALUE
    1 expression element. Expression
    levels were used. Query (1, 32) Runtime Error
    managed stored procedures DATEDIFF: Microsoft :: AnalysisServices :: AdomdServer :: AdomdException.
    DATEDIFF used VBA function?

  • My Macbook Pro is 3 months old and recently it has been making quite a loud fan noise whenever i play music/video or even turning up the volume. I haven't been playing music/ video for ages. Is there any solution?

    My Macbook Pro is 3 months old and recently it has been making quite a loud fan noise whenever i play music/video or even turning up the volume. I haven't been playing music/ video for ages. Is there any solution?

    Try resetting the SMC  http://support.apple.com/kb/HT3964

  • My brother-in-law was killed at work about 2 months ago. His wife has several voicemails from him on her iPhone 3GS  is there any way to save those voicemails as a sound file?  Preferably not using a handheld recorder.

    My brother-in-law was killed at work about 2 months ago. His wife has several voicemails from him on her iPhone 3GS  is there any way to save those voicemails as a sound file?  Preferably not using a handheld recorder.  Any help would be greatly appreciated!

    I offer my condolences, and this: Save Voicemails
    I have not used it but the manufacturer claims it will do what you want.

Maybe you are looking for