1th Activity type confirmed copy value into 2th Activity type:
Hi Gurus.,
I had a problem in production order confirmed (PP-PI), COR6 transaction
I need what 1th Activity type confirmed (value) are copied in 2th Activitiy type cofirmed inside the one order production, so, both value corfimed are equal and the same time, I had customization all the parameters in resources who standard value key, Formule for processing capacity requirements in concordance with standard value key and the calculation of costs of a work center's activity type.
But in the cofirmation Activity (COR6) the user´s key put Quantity in first Activity manually and execute (enter), and this first quantity activity don´t population the second field activity type.
Insite the Resource the costs formule is:
Activity type one: ZPP001
Activity type two: ZPP001
Capacity calculation formule: ZPP001.
What happen about this fault?
Best Regards.,
Julio César Villegas
Hi,
You do not get Second Activity same as first Activity in this scenario.
When we give value in First Activity manually for say about 10 Hrs, it doesn't copy to Second Activity.
As you said Activity 1 and Activity 2 are have same activity types and formulaes then also it will take Actual Values from Master Recipe and will be displayed.
If you want to achieve your requirement you should get ABAP help to write Program. you can use Enhancement.
Thanks
Nag
Similar Messages
-
AppleScript Excel - Copy value of cells into variables
I am super new to AppleScript, so please excuse me if I am not good at explaining what I am trying to do. I have an Excel file that has 12 columns and X rows, I need to have B2/C2/D2/etc copied into variables but have the column be a variable instead of a static number so I can write a loop to get all the rows, etc. Here is what I have now, and I know this is far from being correct.
copy value of cell "B2" to varRow
I have tried something crazy like this:
copy value of column colSection of row intRow to varSection
But that just throws up an error saying the object i am trying to access does not exist. I set the ColSection to "B" and intRow to 2, so I thought it would work. Any ideas or advice I am open! Thanks!The following should give you the idea:
tell application "Microsoft Excel"
activate
make new workbook
set myCol to 3 -- the starting column
set myBgnRow to 2 -- the starting row
set myString to "Hello World" -- characters to be inserted into sheet as sample values
set myChar to 1 -- Points to first character ("H")
set myEndRow to myBgnRow + (length of myString) - 1 -- the ending row
-- Now put some values into the cells
repeat with myRow from myBgnRow to myEndRow
select (cell myCol of row myRow of active sheet)
tell cell myCol of row myRow
set value to character myChar of myString
end tell
set myChar to myChar + 1
end repeat
-- now get the values back out
-- note that this is using same myBgnRow and myEndRow as above
repeat with myRow from myBgnRow to myEndRow
select (cell myCol of row myRow of active sheet)
tell cell myCol of row myRow
set myVal to value
end tell
display dialog (myCol as text) & "," & (myRow as text) & " " & myVal
end repeat
end tell -
How to copy one column BLOB value into another column of another database.
How to copy one column BLOB value into another column of another database.
BLOB value contains word document.
I thought of copy the BLOB value into a text file and then update the new column value by the same text in textfile. Will this work?
Is there any other better way to do this?You're welcome
BLOB fields contains binary data. I don't think you can do this
Also if I view the BLOB as text. Can I copy it and insert into the new database.
I think your options are as I said. Datapump or CTAS
Best Regards -
Copying value from one cursor to another
Hi,
I have a problem while copying values from one cursor to another cursor.
The code looks like below.
PROCEDURE XYZ
TransactionResultSet OUT NOCOPY types.ref_cursor,
IS
temp_cursor types.ref_cursor;
wip_rec types.ref_cursor;
BEGIN
DECLARE
CURSOR temp_cursor IS
SELECT ...........
END;
BEGIN
FOR wip_rec IN temp_cursor
LOOP
update tinsagr set something
where {the condition}
IF SQL%ROWCOUNT = 0 THEN
dbms_output.put_line('this is test ');
Fetch wip_rec into TransactionResultSet;
END IF;
END LOOP;so basically i want to iterate the "temp_cursor" and depending on the values i get it from here i shall update a table. Actually i want to exclude few records from "temp_cursor" and add it/copy rest of the records to "TransactionResultSet"
That means say initially " temp_cursor" has 100 records and i updated 5 records in a table and same number of records should be excluded and rest should be added to the output cursor TransactionResultSet.
How do i achieve it?
while saving i am getting
(1): PLS-00456: item 'WIP_REC' is not a cursor.
Do any one has any idea what to do in such scenario?There are options like....
SQL> CREATE OR REPLACE TYPE emp_obj AS OBJECT (ename VARCHAR2(50), dept NUMBER);
2 /
Type created.
SQL> CREATE OR REPLACE TYPE emp_tbl IS TABLE OF emp_obj;
2 /
Type created.
SQL> set serverou on
SP2-0158: unknown SET option "serverou"
SQL> set serverout on
SQL> DECLARE
2 rc sys_refcursor;
3 v_ename emp.ename%TYPE;
4 v_dept emp.deptno%TYPE;
5 ---End Of Local Varriable Declaration
6 --Procedire declaration !
7 PROCEDURE TEST_CUR(pi_out_ref_cur IN OUT sys_refcursor) IS
8 emp_rec emp_tbl;
9 BEGIN
10 /* This BULK COLLECT can be done with explicit cursor,Ref Cursor
11 with some simple modification, Here I have used implicit cursor! */
12 SELECT emp_obj(ename, deptno) --Casting as the object
13 BULK COLLECT
14 INTO emp_rec
15 FROM emp
16 WHERE deptno = 10;
17
18 dbms_output.put_line('Records selected are:');
19 FOR i in 1 .. emp_rec.COUNT LOOP
20 dbms_output.put_line(emp_rec(i).ename || '--' || emp_rec(i).dept);
21 END LOOP;
22 --Now we are filtering the record and may be doing some operation with each record.
23 FOR i in 1 .. emp_rec.COUNT LOOP
24 IF emp_rec(i).ename = 'KING' THEN
25 --You can change this IF according to your need.
26 emp_rec.DELETE(i);
27 END IF;
28 END LOOP;
29 OPEN pi_out_ref_cur FOR
30 SELECT * FROM TABLE(emp_rec); --Using the TYPE AS table.
31 END TEST_CUR;
32 /* Main execution or procedure calling section*/
33 BEGIN
34 --Actual calling
35 TEST_CUR(rc);
36 dbms_output.new_line;
37 dbms_output.put_line('Now in Ref Cursor');
38 dbms_output.put_line('****************');
39 LOOP
40 FETCH rc
41 INTO v_ename, v_dept;
42 dbms_output.put_line(v_ename || '--' || v_dept);
43 EXIT WHEN rc%NOTFOUND;
44 END LOOP;
45
46 END;
47 /
Records selected are:
CLARK--10
KING--10
MILLER--10
Now in Ref Cursor
CLARK--10
MILLER--10
MILLER--10
PL/SQL procedure successfully completed.
SQL> -
Is it not possible to paste values into the timecode window in FCPX?
I am doing a lot of manual time timecode entering - from someone wo has handed me a paper edit (in the form of an XL spreadsheet)
Has anyone had any success pasting a value into the timecode window? I can't seem to paste even itf I click it first and it turns blue. I can type it in, but I need to copy and paste values. There's a lot of them.
Thanksthank you Arthur, seems I was sleepy
-
Help with dynamic statement returning values into collection
Hi All
I am trying to use dynamic statement to return values into a collection using the returning clause. However, I get an ORA-00933 error. Here is a simple setup:
create table t(
pk number,
id_batch varchar2(30),
date_created date,
constraint t_pk primary key ( pk )
create or replace type num_ntt is table of number;
create or replace type vc2_ntt is table of varchar2(30);
create or replace
package pkg
as
type rec is record(
pk num_ntt,
id_batch vc2_ntt
procedure p(
p_count in number,
p_rt out nocopy rec
end pkg;
create or replace
package body pkg
as
procedure p(
p_count in number,
p_rt out nocopy rec
is
begin
execute immediate '
insert into t
select level, ''x'' || level, sysdate
from dual
connect by level <= :p_count
returning pk, id_batch into :pk, :id_batch'
using p_count returning bulk collect into p_rt.pk, p_rt.id_batch;
end p;
end pkg;
declare
r pkg.rec;
begin
pkg.p( 5, r );
end;
/sanjeevchauhan wrote:
but I am working with dynamic statement and returning multiple fields into a collection.And using an INSERT...SELECT statement combined with a RETURNING INTO clause still does not work. Whether it's dynamic SQL or not: it doesn't work. The link describes a workaround.
By the way, I don't see why you are using dynamic SQL here. Static SQL will do just fine. And so you can literally copy Adrian's setup.
Regards,
Rob. -
Authorisation - Pasting of values into AUTH fields
Hi Friends,
I am working on 4.6c version - Authorisation under PFCG (Role maintenance). Is it possible to paste >8 values into the AUTH fields of an authorisation object in a single shot?
If so, kindly share the solution.
Regards,
Vijay>
vj vijay wrote:
> Hi Friends,
>
> I am working on 4.6c version - Authorisation under PFCG (Role maintenance). Is it possible to paste >8 values into the AUTH fields of an authorisation object in a single shot?
>
> If so, kindly share the solution.
>
>
> Regards,
> Vijay
Hey Vijay,
you sound like a man on the mission - want everytihng done in a SINGLE SHOT
I am not sure if i understand your requirement correctly, but my infernce is that you want to copy data from clipboard to the object values with little / no effort........(prime criteria )
Well, have the values listed one below the other in a notepad, copy them ctrl+C and in SAP have the quick cut and paste option active.
Now go to the object values and right click - you will have 7 rows of data copied, if you want more - repeat the exercise
If you want to reach the moon, you have to pass-by some stars as well (Dumb and in-appropriate quote - I KNOW)
If my understanding of the discussion is wrong - Blame it on the Monday morning Blues...............and have fun -
IDCS3: Can't enter values into dialog boxes
I've just started using InDesign CS3 on an Intel Mac, having been using CS2 on a G5. When I try to enter a value into a dialog box, nothing happens. The dialog box refuses to accept any inputted value. If I use the up/down arrows, I can change the value but only in whole increments. I can't, for instance, place an item 10.5mm from the page edge. It has to be 10 or 11mm.
The same is true of any dialog box for any value.
Has anyone else experienced this very frustrating issue?
Thanks.I guess I need to clarify my situation. I was using the wrong terminology. When I talk about "dialog boxes" I mean the palettes like the Control Panel, Paragraph, Character, Stroke, etc. I can't type into any of them. If I put the cursor in, say, the X pos text box and hit tab (to go to the Y pos text box) all that happens is that all the palettes are hidden. It's like I can't get any focus at all in the palette text boxes.
Sorry about the confusion.
This problem isn't limited to my machine, it happens on any of our networked Macs running CS3, so I think the problem may be related to something else, possibly the Suitcase Server. But there's no way I can confirm this. I was hoping someone else had had the same problem and discovered a solution.
Cheers. -
Populate AWS_CHOICES values into LC workbench process route names
Hi All,
Sometimes we want to give your users a choice, which will affect the routes that are taken within the LiveCycle process. If we put a bit of text into the AWS_CHOICE text field, such as “Approve,Deny”, .you can see the screenshot .now my problem is i need to populate AWS_CHOICES values into LiveCycle workbench process route names .
I am following the suggestions given in the url http://www.avoka.com/blog/?cat=11 .
in the section Giving the user a choice
i was unable to find the checkbox that says “Populate Form with Routes when Assign task activity.
Any response will great appriciation.Hi ,
Thanks for the quick response.
i am using version Adobe LiveCycle Workbench ES2 Version: 9.0.0.0.20091021.2.223388 ,but i was not found for "Populate Form with Route Name" option for Assign task activity.
Please could you confirm which activity has the option "Populate Form with Route Name" .
Thanks
Anjaneyulu. -
Need to insert values into a table from a XML file
Hi,
I'm an Oracle 9i/10g DBA with quite a few years experience, but I'm new to XML and dealing with it in database terms. I've been given a project that entails pulling XML values out of a file (or 100's of them) and storing them in the database so that they are searchable by end-users. The project is classified as secret so I'm unable to upload the specific XML or any info relating to the structire of the XML or the table I will use to insert the values into - sorry!! So, I've created an XML file with a similar structure to help people understand my predicament.
The end-users only need to search on a subset of the total amount of columns from the table I'll insert data into, although the XML file has a lot more, so I dont need to store the other values - but I will need to store the name of the XML file (or a pointer to it so I know what XML file a particular set of values belong to) in another column of the table along with its associated values.
I've been using the XMLTABLE function with some degree of success, although I had better succes using the XMLSEQUENCE function. However, I found out this is deprecated in 10g and replaced with XMLTABLE, so I guess it's better if I use this in case we ever need to upgrade to 11g.
The main problem I've been having is that some elements in the XML files have multiple values for the one record when all the other records are the same. In terms of storing this in the database, I guess it would mean inserting multiple rows in the table for each element where the value differs. Here is a dumbed down XML file similar to what I've got along with the other SQL I've used:
+<?xml version="1.0" encoding="UTF-8"?>+
+<House>+
+<Warehouse>+
+<WarehouseId>1</WarehouseId>+
+<WarehouseName>+
+<Town>Southlake</Town>+
+<State>Texas</State>+
+</WarehouseName>+
+<Building>Owned</Building>+
+<Area>25000</Area>+
+<Docks>2</Docks>+
+<DockType>Rear load</DockType>+
+<WaterAccess>true</WaterAccess>+
+<RailAccess>N</RailAccess>+
+<Parking>Street</Parking>+
+<VClearance>10</VClearance>+
+</Warehouse>+
+<Warehouse>+
+<WarehouseId>2</WarehouseId>+
+<WarehouseName>+
+<Town>Poole</Town>+
+<State>Dorset</State>+
+</WarehouseName>+
+<WarehouseName>+
+<Town>Solihull</Town>+
+<County>West Midlands</State>+
+</WarehouseName>+
+<Building>Owned</Building>+
+<Area>40000</Area>+
+<Docks>5</Docks>+
+<DockType>Rear load</DockType>+
+<WaterAccess>true</WaterAccess>+
+<RailAccess>N</RailAccess>+
+<Parking>Bay</Parking>+
+<VClearance>10</VClearance>+
+</Warehouse>+
+<Warehouse>+
+<WarehouseId>3</WarehouseId>+
+<WarehouseName>+
+<Town>Fleet</Town>+
+<County>Hampshire</County>+
+</WarehouseName>+
+<Building>Owned</Building>+
+<Area>10000</Area>+
+<Docks>1</Docks>+
+<DockType>Side load</DockType>+
+<WaterAccess>false</WaterAccess>+
+<RailAccess>N</RailAccess>+
+<Parking>Bay</Parking>+
+<VClearance>20</VClearance>+
+</Warehouse>+
+</House>+
CREATE TABLE xmltest OF XMLTYPE;
INSERT INTO xmltest
VALUES(xmltype(bfilename('XML_DIR', 'test.xml'), nls_charset_id('AL32UTF8')));
Consequently, I need to...
1) Retrieve the results from the XML file for all 3 warehouses where multiple values for the same sub-element are shown as 2 rowsthe result set. (I am guessing there will be 4 rows returned as warehouse sub-2 has 2 different elements for <WarehouseName>.
2) Build a case statement into the query so that regardless of the sub-element name (i.e State or County), it is returned into the 1 column, for instance County.
So, if I run a query similar to the following...
select y.WarehouseId, y.Town, y.County, y.Area
from xmltest x, xmltable('/House/Warehouse' .......
I would like to get results back like this...
ID Town County Area
1 Southlake Texas 25000
2 Poole Dorset 40000
2 Solihull West Midlands 40000
3 Fleet hampshire 10000
Sorry for the non-formatting but I hope this all makessense to someone out there with what I'm trying to do.
I appreciate any help whatsoever because, as i said before, I'm totally new to XML and trying to read the vast amount of information there is out there on XML is all a bit daunting.
Many thanks in advance,
Shaun.Hi again,
Thanks for keeping the post open for me. I've had a look at the post illustrating the XFileHandler package, and tried to alter it to make it fit with my XML files. To help explain things, my XML file looks like this:
<?xml version="1.0"?>
<!DOCTYPE CMF_Doc SYSTEM "CMF_Doc.dtd">
<House>
<Warehouse>
<WarehouseId>1</WarehouseId>
<WarehouseName>
<Town>Southlake</Town>
<State>Texas</State>
</WarehouseName>
<Building>Owned</Building>
<Area>25000</Area>
<Docks>2</Docks>
<DockType>Rear load</DockType>
<WaterAccess>true</WaterAccess>
<RailAccess>N</RailAccess>
<Parking>Street</Parking>
<VClearance>10</VClearance>
</Warehouse>
<Warehouse>House
<WarehouseId>2</WarehouseId>
<WarehouseName>
<Town>Poole</Town>
<State>Dorset</State>
</WarehouseName>
<WarehouseName>
<Town>Solihull</Town>
<County>West Midlands</County>
</WarehouseName>
<Building>Owned</Building>
<Area>40000</Area>
<Docks>5</Docks>
<DockType>Rear load</DockType>
<WaterAccess>true</WaterAccess>
<RailAccess>N</RailAccess>
<Parking>Bay</Parking>
<VClearance>10</VClearance>
</Warehouse>
<Warehouse>
<WarehouseId>3</WarehouseId>
<WarehouseName>
<Town>Fleet</Town>
<County>Hampshire</County>
</WarehouseName>
<Building>Owned</Building>
<Area>10000</Area>
<Docks>1</Docks>
<DockType>Side load</DockType>
<WaterAccess>false</WaterAccess>
<RailAccess>N</RailAccess>
<Parking>Bay</Parking>
<VClearance>20</VClearance>
</Warehouse>
</House>
<?xml version="1.0" encoding="UTF-8"?>
<House>
<Warehouse>
<WarehouseId>4</WarehouseId>
<WarehouseName>
<Town>Dallas</Town>
<State>Texas</State>
</WarehouseName>
<Building>Owned</Building>
<Area>25000</Area>
<Docks>2</Docks>
<DockType>Rear load</DockType>
<WaterAccess>true</WaterAccess>
<RailAccess>N</RailAccess>
<Parking>Street</Parking>
<VClearance>10</VClearance>
</Warehouse>
<Warehouse>
<WarehouseId>5</WarehouseId>
<WarehouseName>
<Town>Dorchester</Town>
<State>Dorset</State>
</WarehouseName>
<WarehouseName>
<Town>Solihull</Town>
<County>West Midlands</County>
</WarehouseName>
<Building>Owned</Building>
<Area>40000</Area>
<Docks>5</Docks>
<DockType>Rear load</DockType>
<WaterAccess>true</WaterAccess>
<RailAccess>N</RailAccess>
<Parking>Bay</Parking>
<VClearance>10</VClearance>
</Warehouse>
<Warehouse>
<WarehouseId>6</WarehouseId>
<WarehouseName>
<Town>Farnborough</Town>
<County>Hampshire</County>
</WarehouseName>
<Building>Owned</Building>
<Area>10000</Area>
<Docks>1</Docks>
<DockType>Side load</DockType>
<WaterAccess>false</WaterAccess>
<RailAccess>N</RailAccess>
<Parking>Bay</Parking>
<VClearance>20</VClearance>
</Warehouse>
</House>
<?xml version="1.0" encoding="UTF-8"?>
<House>
<Warehouse>
<WarehouseId>7</WarehouseId>
<WarehouseName>
<Town>Southlake</Town>
<State>Texas</State>
</WarehouseName>
<Building>Owned</Building>
<Area>25000</Area>
<Docks>2</Docks>
<DockType>Rear load</DockType>
<WaterAccess>true</WaterAccess>
<RailAccess>N</RailAccess>
<Parking>Street</Parking>
<VClearance>10</VClearance>
</Warehouse>
<Warehouse>
<WarehouseId>8</WarehouseId>
<WarehouseName>
<Town>Bournemouth</Town>
<State>Dorset</State>
</WarehouseName>
<WarehouseName>
<Town>Shirley</Town>
<County>West Midlands</County>
</WarehouseName>
<Building>Owned</Building>
<Area>30000</Area>
<Docks>5</Docks>
<DockType>Rear load</DockType>
<WaterAccess>true</WaterAccess>
<RailAccess>N</RailAccess>
<Parking>Bay</Parking>
<VClearance>10</VClearance>
</Warehouse>
<Warehouse>
<WarehouseId>9</WarehouseId>
<WarehouseName>
<Town>Clapham</Town>
<County>London</County>
</WarehouseName>
<Building>Owned</Building>
<Area>10000</Area>
<Docks>1</Docks>
<DockType>Side load</DockType>
<WaterAccess>false</WaterAccess>
<RailAccess>N</RailAccess>
<Parking>Bay</Parking>
<VClearance>20</VClearance>
</Warehouse>
</House>And the XFilehandler package looks like this (I'm just trying to do a simple select only on WarehouseId & WaterAccess for the time being to keep things simple):
create or replace package XFileHandler as
TYPE TRECORD IS RECORD (
WID NUMBER(2)
, WACCESS VARCHAR2(5)
type TRecordTable is table of TRecord;
function getRows (p_directory in varchar2, p_filename in varchar2) return TRecordTable pipelined;
end;
create or replace package body XFileHandler is
function getRows (p_directory in varchar2, p_filename in varchar2)
return TRecordTable pipelined
is
nb_rec number := 1;
tmp_xml clob;
tmp_file clob;
rec TRecord;
begin
DBMS_LOB.CREATETEMPORARY(TMP_FILE, TRUE);
tmp_file := dbms_xslprocessor.read2clob(p_directory, p_filename);
LOOP
tmp_xml := regexp_substr(tmp_file, '<\?xml[^?]+\?>\s*<([^>]+)>.*?</\1>', 1, nb_rec, 'n');
exit when length(tmp_xml) = 0;
--dbms_output.put_line(tmp_rec);
nb_rec := nb_rec + 1;
select y.WID, y.WACCESS
into rec.WID, rec.WACCESS
from xmltable('/House' passing xmltype(tmp_xml)
columns WID NUMBER(2) PATH 'Warehouse/WarehouseId',
WACCESS VARCHAR2(5) PATH 'WaterAccess') y;
pipe row ( rec );
end loop;
dbms_lob.freetemporary(tmp_file);
return;
end;
end;Now, when I run the query:
select * from table(XFileHandler.getRows('XML_DIR', 'XFileHandler_test.xml'));I get the error: ORA-00600: internal error code, arguments: [17285], [0x5CFE8DC8], [4], [0x45ABE1C8], [], [], [], []
I had a look in the dump file for anything obvious, but nothing really stands out. Is there anything obvious in my code that I'm missing or something else which you may think could be causing this error, e.g in the regular expression regexp_substr?
Many thanks,
Shaun. -
Inserting a Value into otherTable using an App. Proc. from a Date Picker
I'm trying to call an Application Process that will insert an Attribute of a Row, into another table, after selecting a date from a Date Picker cell.
I don't know why this shouldn't be possible. I think I've got all of my "Ducks in a Row", so to speak,
but the Value that is being inserted into the other table is this:.. [object HTMLTableCellElement]
(Ultimately, I'd like my Application Process to include Page element values with the insert as well, but I'm trying to handle one problem at a time)
Here's a list of all the steps I've covered:
1. I've Created an Application Process, (popDevices). The Process Point is "On-Demand". The Type is "PL/SQL Anonymous Block".
The Process is defined as such:
BEGIN
Insert into P_DEVICES
NAME,
IP_ADDRESS,
MODEL
) values
'Unassigned',
'Unassigned',
:P153_MODEL
COMMIT;
END;
2. I've Included the Javascript in the Page HTML Header.
The Javascript is written as such: (minus the tags)
function popDevices(PART_NO)
var get = new htmldb_Get(null,$x('pFlowId').value,'APPLICATION_PROCESS=popDevices',0);
get.add('P153_MODEL',PART_NO);
gReturn = get.get();
get = null;
3. I've included the following in the "Element Attributes" field of the Date-Picker Item (Date_Delivered).
The Region Type is "SQL Query (Updatable Report)"
onChange="javascript:popDevices(PART_NO);"
THE RESULTS
A. A row does get inserted into the other (P_Devices) table,
But the value of the Attribute from the Page Region is not valid.
The Inserted value is this: [object HTMLTableCellElement]
B. I have tried Every conceivable combination of characters in the "Element Attributes" field, such as:
...(PART_NO), (#PART_NO#), (||PART_NO||), (+PART_NO+)
C. The Javascript in the Page HTML Header appears to be correct, since I have written it this same way for other applications without any problems.
D. If this simply cannot be done by referencing the "onChange" Javascript from the "Element Attributes" field,
Then can you help me to write the code into the Select statement of the region.
Thanks for any help you can give me.
-GaryThis may not be the most direct approach to the solution. But, none the less, it is a solution.
For those other novices, like myself, I hope this can be useful at some point in your development:
MY DESIRED RESULT:
A. To Insert into another tablle values derived from both; Page Item (i.e. P153_x) and Attributes of a Row in an Updatable Report from which I have selected the Date-Picker.
B. I want the insert to occur automatically after the user Selects the date from the Date-Picker.
SOLUTIONS:
1. I usea Javascript prompt window to prompt for information and store the information in Pre-Created Page Items.
This is the Javascript as I've entered it into the Page HTML Header region: (Minus the Tags)
function received_javaprompt () {
var Serial_Number = prompt("Enter the Serial Number");
var Bldg_Id = prompt("Enter the Bldg_Id");
var Clst_Id = prompt("Enter the Clst_Id");
$x('P153_SERIAL_NO').value = Serial_Number;
$x('P153_BLDG_ID').value = Bldg_Id;
$x('P153_CLST_ID').value = Clst_Id;
2. I needed to identify the (Manufacturer and Part_No) Column Attribute in the Row from which I selected the Date-Picker.
A. To do this, I enumerated the Columns in the order they were listed in the Select Statement of the region (Click on the Region Definition Tab).
B. Then (Click on the Report Attributes Tab). Count, In the numerical order which these columns are selected, ONLY the columns that are Editable.
C. When I counted down as far as the Column I wanted to capture the value of, Then I made a mental note of that number and used it in the following (2) Javascripts (findMaker and findModel).
3. findMaker (Minus the tags)
function findMaker (pThis) {
var vRow = pThis.id.substr(pThis.id.indexOf('_')+1);
var Maker = html_GetElement('f15_'+vRow).value
$x('P153_MAKER').value = Maker;
4. findModel (Minus the tags)
function findModel (pThis) {
var vRow = pThis.id.substr(pThis.id.indexOf('_')+1);
var Model = html_GetElement('f16_'+vRow).value
$x('P153_MODEL').value = Model;
5. I added one more Javascript, to the Page HTML Header, that references the Application Process which will Insert the values into the "Other" table:
function popDevices(P153_SERIAL_NO,P153_BLDG_ID,P153_CLST_ID,P153_MAKER,P153_MODEL)
var get = new htmldb_Get(null,$x('pFlowId').value,'APPLICATION_PROCESS=popDevices',0);
get.add('P153_SERIAL_NO',P153_SERIAL_NO);
get.add('P153_BLDG_ID',P153_BLDG_ID);
get.add('P153_CLST_ID',P153_CLST_ID);
get.add('P153_MAKER',P153_MAKER);
get.add('P153_MODEL',P153_MODEL);
gReturn = get.get();
get = null;
6. I added the "onChange" process to the Element Attributes field of the Table item which utilizes the Date-Picker:
A. Click on the Report Attributes Tab of the Region.
B. Click on the Edit icon of the column which utilized the Date-Picker
C. I added this "onChange" reference to the Element Attributes field, which is found in the Tabular Form section.
onChange="javascript:received_javaprompt();findModel(this);findMaker(this);popDevices((P153_SERIAL_NO).value,(P153_BLDG_ID).value,(P153_CLST_ID).value,(P153_MAKER).value,(P153_MODEL).value);"
7. The Application Process which inserts the collected data into the table is as follows:
(Name= popDevices: Process Point= On-Demand: Type= PL/SQL Anonymous Block)
BEGIN
Insert into P_DEVICES
BLDG_ID,
CLST_ID,
NAME,
IP_ADDRESS,
SERIAL_NO,
MAKER,
MODEL
) values
:P153_BLDG_ID,
:P153_CLST_ID,
'Unassigned',
'Unassigned',
:P153_SERIAL_NO,
:P153_MAKER,
:P153_MODEL
COMMIT;
END;
Well, I hope this may help someone else like me.
I usually arrive at my solutions by getting help here on the Discussion Forum and also Google. Google inevitably points me to a previous Apex Discussion Forum session.
Edited by: garyNboston on Mar 15, 2010 10:55 AM -
Copy & Paste into Google Maps no longer works after 4.2 update
Anyone else seem to be getting this problem? Copy and paste into Google maps was extremely useful. Now this doesn't seem to work for me after updating to 4.2.
1. Copy something into the clipboard (doesn't matter what it is)
2. Open Google maps
3. Try to paste into the search bar. You don't get the paste option.
4. Try to type something into the search bar then attempt to copy what you just typed. No options appear to copy what was just typed in.
This used to work prior to the 4.2 update. Very useful when receiving incomplete addresses via text message or from a web page. -
Problem in Showing multiple values into one text box.
Hi all,
How can show i multiple row values into one text box. here text box is multi line type.
i have one table it has content column, it has number of rows. i need to show those data into one text box in form. how can i solve it?
my sample code here,
egin
--:block3.txt_to := :parameter.p_current_user||''||':'||:block3.txt_From;
-- go_item('txt_from');
insert into chat(fromid,toid,content)values(:block3.fromid,:block3.toid,:block3.txt_From);
:block3.txt_From:= null;
commit;
:block3.txt_to := :parameter.p_current_user||''||':'||:block3.txt_From;
go_item('txt_from');
declare
cursor c4 is select content from chat where toid = :block3.fromid;
rec1 c4%rowtype;
begin
open c4;
loop
fetch c4 into rec1;
exit when c4%notfound;
null;
end loop;
end;
--select content into :block3.txt_to from chat where toid= :block3.fromid;
end;
please give me some tips to solve it.
thanks
gurusHi,
Try giving CHR(10) for line feed.
DECLARE
CURSOR C4 IS SELECT CONTENT FROM CHAT WHERE TOID = :BLOCK3.FROMID;
Str_Temp VARCHAR2(20);
BEGIN
:BLOCK3.TXT_TO := '';
OPEN C4;
LOOP
FETCH C4 INTO Str_Temp;
EXIT WHEN C4%NOTFOUND;
:BLOCK3.TXT_TO := :BLOCK3.TXT_TO || CHR(10) || Str_Temp;
END LOOP;
CLOSE C4;
END;Regards,
Manu.
If this answer is helpful or correct, please mark it. Thanks. -
How to populate value into textboxes
Hi,
I'm working with oracle forms for portlet and need help populating a certain value into textboxes. There are 40 textboxes, 40 checkboxes, and a textbox for a user to enter a value. When a user checks the preferred checkboxes then enters the value into the textbox, I want this value to be populated into those 40 textboxes.
Please help...
Thx in advance,
Thuly2Hi Adi
If ZVal is your value node then,
DATA: lref_entity TYPE REF TO cl_bsp_wd_value_node,
lref_bo_coll TYPE REF TO if_bol_bo_col,
lref_data TYPE REF TO <<your ZStructure>>,
ls_data type <<your ZStructure>>.
ls_data-<<field1>> = 'XYZ'
ls_data-<<field2>> = 'XYZ'
CREATE OBJECT lref_bo_coll TYPE cl_crm_bol_bo_col.
CREATE DATA lref_data.
CREATE OBJECT lref_entity
EXPORTING
iv_data_ref = lref_data.
lref_entity->set_properties( ls_data ).
lref_bo_coll->add( lref_entity ).
typed_context->ZVal->set_collection( lref_bo_coll ).
Hope this was helpful.
Best Regards,
Lakshminarayana -
How to get the section value into configurator developer page
Hi,
I am working on configurator developer, Can I get the section value into the configurator developer page by any setup. If possible means please help me on that.
Thanks advance,
GopiI thought the same.Thanks for confirming...I tried with loop approach.but i am unable to get decimal part...
eg if my values are 12.25 and 123.12....my below code ignores decimal points..i know since i am using Number, it is happening..but could you please let me know how can i get decimal values also..
OAViewObject vo = (OAViewObject) am.findViewObject("XXXXInvDistributionsVO1");
vo.first();
Number grossamount = 0;
for (int i=0;i< vo.getRowCount();i++) {
// BigDecimal grossamount1 = new BigDecimal((vo.getRowAtRangeIndex(i).getAttribute("Amount")));
grossamount = ((oracle.jbo.domain.Number)vo.getRowAtRangeIndex(i).getAttribute("Amount")).intValue();
System.out.println("grossamount "+grossamount); // it ignores and prints decimal points
BigDecimal grossamount1 = new BigDecimal(grossamount.intValue());
System.out.println("grossamount1 "+grossamount1); // it ignores and prints decimal points
vo.next();
Thanks
Raj
Maybe you are looking for
-
Ihave an HP Pavilion running Windows 7 Home Premium and an HP Officejet 4500 510g all-in-one. I suddenly cannot scan from the Solution Center or from the front panel of my printer. The Solution Center first gave me an error: 8,[(8,101,0)]. I reboo
-
hi, i am not able to get the print preview for delivery output, i have checked delivery output has got determined, when i goto vl02n, and issue out put then i am able to get the delivery output type, when i select the output type and click on the pri
-
Enable / disable classification fields in material master?
Hi experts We hope to assign one group who could change the matieral master fields on classification. Like one gropu who could change the classification fields- date, on mateiral master . others only could display Is that possible to modify the progr
-
I am trying to reinstall itunes and it won't install because my computer says it has a virus. Anybody had this problem and what did you do?
-
Times moves really fast EFFECT in Final Cut Pro
I want to know how to do the effect used in Paranormal Activity. Like this (http://www.youtube.com/watch?v=F_UxLEqd074) at 0:40 seconds. This time moves really fast, implying that time is going by really fast. How do you do this?