2.0.2 Contacts almost unusable.

I sync my contacts with my mobile me account.
I've noticed that the lag is STILL prevalent in 2.0.2
And the application always seems to crash when pushing the home button when in the app.

clarkkent26 wrote:
DStephenW wrote:
I have 2.0.1 and I get a serious delay when opening contacts.
Both of you try restoring. But when asked to restore from a backup. Don't. Set up as a new phone. That worked for me. Hope it helps.
Are you kidding me ?
I have setup my ******* phone as new about 3 times so far.
No joy.

Similar Messages

  • Photoshop Elements 12 runs really slow and is almost unusable.

    Photoshop (and Premiere) Elements 12 runs really slow and is almost unusable.
    All other high end software works perfectly including 3D rendering software.
    27" iMac mid 2011.
    16gb of RAM.
    Over 100gb free hdd space.
    Radeon HD card 2GB.
    3.4 GHz Intel Core i7.
    I have tested on tiny low quality images as well.
    I bought this with the bundled Premiere Elements which is also unusable even with the smallest and lowest quality video file.
    iMovie works fine as does other video editing software. I ONLY have an issue with Photoshop and Premiere Elements 12.
    Mavericks 10.9.3
    Elements 12.1

    After the latest update, Firefox is much better. Using it again.

  • My iMac is now almost unusable! Thanks Lion!!

    Upgraded to 10.7.2 Lion and now my system is so slow it's rendered itself almost unusable. On top of that my internet drops out at every gust of wind, resulting in my having to restart it every 15 minutes!! We are a retail comany ramping up big time now for Xmas printing and I can't work with this any more. On top of that, my machine has spent 4 days in the apple store being rebuilt from scratch, thanks to Lion upgrade!!
    Thanks, Apple - to whom do I complain please?!

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software -- potentially for the worse. The following procedure will help identify which such modifications you've installed. Don’t be alarmed by the complexity of these instructions -- they’re easy to carry out and won’t change anything on your Mac.
    These steps are to be taken while booted in “normal” mode, not in safe mode. If you’re now running in safe mode, reboot as usual before continuing.
    Below are four lines of text in monospaced type, which are UNIX shell commands. They’re harmless, but they must be entered exactly as given in order to work. If you have doubts about the safety of running these commands, search this site for other discussions in which they’ve been used without any report of ill effects.
    Some of the commands will line-wrap in your browser, but each one is really just a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then either copy or drag it. The headings “Step 1” and so on are not part of the commands.
    Note: If you have more than one user account, Step 2 must be taken as an administrator. Ordinarily that would be the user created automatically when you booted the system for the first time. The other steps should be taken as the user who has the problem, if different. Most personal Macs have only one user, and in that case this paragraph doesn’t apply.
    To begin, launch the Terminal application; e.g., by entering the first few letters of its name in a Spotlight search. A text window will open with a line already in it, ending either in a dollar sign (“$”) or a percent sign (“%”). If you get the percent sign, enter “sh” and press return. You should then get a new line ending in a dollar sign.
    Step 1
    Copy or drag -- do not type -- the line below into the Terminal window, then press return:
    kextstat -kl | awk ' !/com\.apple/ { print $6 $7 } '
    Post the lines of output (if any) that appear below what you just entered (the text, please, not a screenshot.)
    Step 2
    Repeat with this line:
    sudo launchctl list | sed 1d | awk ' !/0x|apple|com\.vix|edu\.|org\./ { print $3 } '
    This time, you'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. You don't need to post the warning.
    Step 3
    launchctl list | sed 1d | awk ' !/0x|apple|edu\.|org\./ { print $3 } '
    Step 4
    ls -1A {,/}Library/{Ad,Compon,Ex,Fram,In,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Sta}* 2> /dev/null
    Important: If you synchronize with a MobileMe account, your me.com email address may appear in the output of the above command. If so, change it to something like “[email protected]” before posting.
    Remember, steps 1-4 are all drag-and-drop or copy-and-paste, whichever you prefer -- no typing, except your password.
    You can then quit Terminal.

  • Updated 9.0 Beta (20111212185108) a few days ago. Now having "Not Responding" message almost everytime I use Firefox. Long delays until it responds. Almost unusable now.

    Downloaded update to Firefox 9.0 Beta (20111212185108) on 12-16-11. Update status was successful. Now Firefox delays with "Not Responding" message almost every time I click on something. Browser is almost unusable.

    You are welcome. I'm glad you got it back up.
    (1) You say you did the symbolic link. I will assume this is set correctly; it's very important that it is.
    (2) I don't know what you mean by "Been feeding the [email protected] for several weeks now, 700 emails each day at least." After the initial training period, SpamAssassin doesn't learn from mail it has already processed correctly. At this point, you only need to teach SpamAssassin when it is wrong. [email protected] should only be getting spam that is being passed as clean. Likewise, [email protected] should only be getting legitimate mail that is being flagged as junk. You are redirecting mail to both [email protected] and [email protected] ... right? SpamAssassin needs both.
    (3) Next, as I said before, you need to implement those "Frontline spam defense for Mac OS X Server." Once you have that done and issue "postfix reload" you can look at your SMTP log in Server Admin and watch as Postfix blocks one piece of junk mail after another. It's kind of cool.
    (4) Add some SARE rules:
    Visit http://www.rulesemporium.com/rules.htm and download the following rules:
    70sareadult.cf
    70saregenlsubj0.cf
    70sareheader0.cf
    70sarehtml0.cf
    70sareobfu0.cf
    70sareoem.cf
    70sarespoof.cf
    70sarestocks.cf
    70sareunsub.cf
    72sare_redirectpost
    Visit http://www.rulesemporium.com/other-rules.htm and download the following rules:
    backhair.cf
    bogus-virus-warnings.cf
    chickenpox.cf
    weeds.cf
    Copy these rules to /etc/mail/spamassassin/
    Then stop and restart mail services.
    There are other things you can do, and you'll find differing opinions about such things. In general, I think implementing the "Frontline spam defense for Mac OS X Server" and adding the SARE rules will help a lot. Good luck!

  • I updated my 4s, and now the text messaging is so slow its almost unusable (type then wait 20  seconds to see characters)

    I updated my 4s, and now the text messaging is so slow its almost unusable (type then wait 20 seconds or more to see characters on the screen).  Help Please!

    It is possible that there is a problem with the files sessionstore.js and sessionstore.bak in the Firefox Profile Folder.
    Delete the sessionstore.js [2] file and possible sessionstore-##.js [3] files with a number and sessionstore.bak in the Firefox Profile Folder.
    * Help > Troubleshooting Information > Profile Directory: Open Containing Folder
    * http://kb.mozillazine.org/Profile_folder_-_Firefox
    Deleting sessionstore.js will cause App Tabs and Tab Groups and open and closed (undo) tabs to get lost, so you will have to create them again (make a note or bookmark them).
    See also:
    * [1] http://kb.mozillazine.org/Session_Restore
    * [2] http://kb.mozillazine.org/sessionstore.js
    * [3] http://kb.mozillazine.org/Multiple_profile_files_created

  • How long is a recent list stores in an iPhone in messages? I deleted a contact almost a year ago and it still comes up as a name and number?

    How long is a recent list stores in an iPhone in messages? I deleted a contact almost a year ago and it still comes up as a name and number and when you click on the I button, it says "delete from recent list"
    Hardly a recent number

    Yeah that info will certainly carry over form the backup, but once you delete it from recents, it shouldn't show up anymore.

  • Bought a new windows computer and older and newer versions of photoshop have extremely small icons/font/tools...etc., making it almost unusable.  Any suggestions?  Or, do I take my new computer back?

    bought a new windows computer and older and newer versions of photoshop have extremely small icons/font/tools...etc., making it almost unusable.  Any suggestions?  Or, do I take my new computer back?

    That's Adobe for you!
    No matter how much we request, beg and/or complain, nothing is done about the miserably small interface.
    We're still left with the three inadequate choices in preferences:
    Other than that, you can change your monitor's resolution.

  • 2010 Macbook Pro is running SUPER slow.  Almost unusable.

    My 2010 Macbook Pro is running so slow that it's almost unusable due to the buffering of data and the color wheel spinning incessantly.  I close applications, restart and nothing helps.  I have not downloaded any clean up software.  I teach and am dependent on my computer for EVERYTHING I do.
    HELP PLEASE!!

    Back up your Mac if you have not already done so. To learn how to use Time Machine read Mac Basics: Time Machine backs up your Mac - Apple Support
    Determine if the same problems exist in "Safe Mode". Read below.
    Safe Mode or "Safe Boot" is a troubleshooting mode that bypasses all third party system extensions and loads only required system components. Read about it: Starting up in Safe Mode
    You must disable FileVault before you can start your Mac in Safe Mode.
    Starting your Mac in Safe Mode will take longer than usual, graphics will not render smoothly, audio is disabled on some Macs, and some programs (iTunes for example) may not work at all.
    Merely starting your Mac in Safe Mode is not intended to resolve the problem, it's to observe its performance without certain additional components.
    To end Safe Mode restart your Mac normally. Shutdown will take longer as well.
    If you are still experiencing problems more information will be required. If you don't know where to start, EtreCheck can help with that. Read below.
    Apple Support Communities contributor etresoft wrote a very useful app to quickly gather certain system information that may help point to a cause of this problem. Read about it here. It contains a link to download EtreCheck. Do not download it from anywhere else (such as may be found by following the results of an Internet search).
    Click Open - etresoft contributes to this forum frequently and can be considered a trustworthy developer.
    It will take a moment to run as it collects its data.
    Copy and paste its output in a reply.
    Do not be concerned about anything that says "Problem" or “failed” or anything else that may appear in red.
    EtreCheck was designed to remove any personal information (such as your computer's name and serial numbers) but if you see anything that looks like an email address or any other personal information that should not be divulged to others, please delete or obscure that information when you post the reply.
    When you are finished with EtreCheck, quit the program. It occupies very little space, and you can keep it or drag it to the Trash as you wish.

  • Update to 10.10.3 Failed Now MacPro is Almost Unusable

    The update to 10.10.3 failed -- got stuck at 99% so I powered down and after many attempts I got back to the desktop.  I am now still on 10.10.2 but my MacPro has slowed to a crawl.  I was advised that Yosemite needs more memory (I have 2GB) so I ordered 8GB more and it's on its way.  However I need to use my computer but it's almost unusable -- programs open so slow then automatically shut down.  I really don't think the memory will fix this as I've been running Yosemite for a while and just in the last few days has it been brought to it's knees.
    Is there anything else that I can check to see why it is so so so slow?
    Thanks
    Alan

    Activity Monitor - Mavericks  also Yosemite
    Activity Monitor in Mavericks has significant changes
    Performance Guide
    Why is my computer slow
    Why your Mac runs slower than it should
    Slow Mac After Mavericks
    Things you can do to resolve slowdowns  see post by Kappy
    6 Easy Tips to Speed Up OS X Yosemite on Your Mac
    Try running this program and then copy and paste the output in a reply. The program was created by Etresoft, a frequent contributor.  Please use copy and paste as screen shots can be hard to read.
    Etrecheck – System Information

  • Almost Unusable System

    For days now it has been almost impossible to use the BT system and emails.  I log in and although the email page loads it hangs there saying 'transferring data from.'.  Without it loading properly it is also impossible to sign out again.  I raised an issue of not being able to log in properly a few days ago and was told that BT was aware there was a problem, since then the system has got worse and worse.  This evening I have not been able to use the email system at all.  I don't know if this is a line speed problem or what but I am heartily sick of paying for a system which is basically unusable.  Even the BT website itself seems to take an eternity to load.  Is this a general problem or does BT have some serious issues.  I have checked for faults on my line and am told it is fine.

    Hi AlisonP
    We put up notification about outages and whatnot on our website so generally you can get updates about them here.
    If your number isn't listed here follow the link in Johns post and reply back and the community will be happy to help you out
    Cheers
    Craig
    BTCare Community Mod
    If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
    We are sorry but we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)”
    td-p/30">Ratings star on the left-hand side of the post.
    If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

  • Acrobat 9.4 now almost unusable

    I posted a question about a week ago, 31 views but sadly no suggestions.
    I've had Acrobat Pro running now for a couple of months, but over the last couple of weeks it is taking longer and longer for every action, it loads files normally but the response time for every click is more than ten seconds. It really has become practically unusable, even as a simple PDF reader.
    I have tried contacting Adobe support, but every time I try and 'send' the email I end up with an 'I'm sorry an error has occurred' etc. I've had to give up trying.
    My question is twofold, anybody got any ideas about the slowing down and anybody got any ideas about how I can contact Adobe?
    The strange thing is that it used to work perfectly, I've uninstalled and reinstalled it, and checked on FAQs, but have found no answers, just hoping somebody out there can help.
    iMac, OSX 10.6.4

    Great!!
    If your issue has been resolved you can mark this issue as answered..so that if someone else faces this issues, he knows which thread to follow.
    BTW, for the original user, just check if you have some abnormal in your User-Application Data.

  • PS CS4 almost unusable with snow leopard

    Installed Snow Leopard.  Ran the adobe uninstall for CS3 then did a fresh install of CS4.  Downloaded all the updates.  When I open Photoshop I get a constant stream of the same error message that reads "Could not complete your request because of a program error" screen shot attached.  It makes Photoshop pretty much unusable.  I'm not having the same problems with Illustrator.  I'm working on a MacBook Pro w/ 1.83 GHz Intel Processor and 1.5 GB 667 Mhz Memory.  If anyone could help me suss out the problem I'd be eternally grateful.
    Cheers,
    Bummersville

    I have run CS4 with Snow Leopard installed by three different methods:
    1. Default Upgrade method to my Leopard volume
    2. Erase and install SL then migrate everything from my Leopard volume.
    3. Erase and install SL, install fresh CS4, no migration, no other software installed
    All three crash Bridge and Photoshop frequently, especially while using the output module to make PDF contact sheets (crashes while entering the settings).
    1 and 2 also crash on quitting the prog, (but my Leopard has spells of doing that too)
    Machine is Mac Pro 4 x 2.66 ver 1,1 with 8Gb RAM
    Did all the standard stuff before and after installs, permissions, DU etc plus PRAM, SMC. Also trashed the prefs in Bridge and CS4.
    The fact that the "erase/install/CS4 only" method crashes tells me that there is something hardware related in my machine (and probably other peoples too) which SL + CS4 doesn't like, and that there is no point in chasing software solutions.
    I would be grateful if anyone who is having no problems with CS4 and Snow Leopard could spend a few minutes making contact sheets with the output module...use all the options. I have successfully done several contact sheets, but also had most crashes while entering the settings.
    Thanks

  • When Add-ons download, it slows my laptop down til it is almost unusable. Do I need them and if not, how do I stop them?

    I am not really sure what these Add-ons do and do not know if I need them. When they download (automatically), they slow my laptop down to the point of almost being unusable. If I don't absolutely need them, how do I keep them from automatically downloading and slowing down my computer?

    send an email to the iTS customer service using this form and ask the folks there to help you sort it out.

  • ICal almost unusable

    It takes a few seconds (sometimes almost a minute) before I can actually enter anything even changing the views from "List" to "Day" to "Month". When I enter an event I see the sync indicator and it looked like it's syncing it somewhere. I have iOS 5 and I'm not connected to iCloud or Mobile Me
    Thank you in advance for any help.

    Yes, it does sound like a corrupt file somewhere. What are you syncing your calendar to on the computer? Do you have so many calendar events that you cannot look at them individually? Sometimes a recurring event can cause this problem. Did you add a recurring event around the same time that you upgraded?
    If you have your calendar and contacts and other data saved to the computer, have you thought of restoring the phone as a new device and then syncing data back to the phone rather then restoring from a backup?
    Those are the only thoughts that I have on it right now.

  • Phone freezing and almost unusable since software update - Help!

    I am hoping someone can help. I have a Blackberry Q10 (work phone) and yesterday i downloaded the software update. I didnt notice any issues but when it rebooted it just froze on the home screen (i can see the time /wallpaper etc but cannot make any swipe gestures to move from this screen) I have tried re-booting/taking the battery out etc. I left the battery out last night and this morning plugged the phone into my laptop- that did occasionally free up the swipe function and i can occasionally get into BBM and Text (which are both working) but I can no longer view my email (i can see them in the hub but not read the actual message) and i cannot access my contacts or make or receive any calls. The phone still keeps freezing on the home page (it seems to free up momentarily if i connect to my laptop). the battery is draining very fast also. I am not very tech savvy at all, can anyone help me? (my phone provider is BT) Thanks N

    Anyone? Battery has now completely drained and will only work if plugged into my laptop (it was charging yesterday)

Maybe you are looking for