2.1.1 through 3.0EA - SQLDeveloper hangs after clicking on SQL tab of view

Hi,
the following happens consistently both on SQL Developer 2.1.1.64 and 3.0.2.83 on Mac OS X and Java 1.6.0_22-b04-307 (64bit).
1. I open a connection to an XE database
2. I navigate to the Views node
3. I select a view
4. I click on the SQL sub-tab to display the DDL statement for the view
5. As soon as i click on the tab to return to the SQL scratchpad for the open connection, the color wheel appears and SQL developer hangs and one must "force quit" the application.
As i said, this happens on both versions of SQL Developer
Flavio
http://oraclequirks.blogspot.com

Then it is clearly an issue with the TabSet component...
A couple of related postings (but not for creator) i ran into seemed to have been solved by setting jdk to 1.4.2 (and sometimes it is the ant version that seems to have been the problem):
http://swforum.sun.com/jive/thread.jspa?threadID=103854&messageID=354068
Can u try setting the server's jdk to 1.4.2 and see if the problem goes away? (btw, the error happens at server and not in the ide, right?)

Similar Messages

JDev hangs after click on event-tab in MW

Hi all,
I have problem with definition an descriptor-event in MW in JDev 10.1.2:
When I define "tab" event on descriptor (none method selected yet), save and close JDev, after opening JDev and click on this "tab" event JDev hangs.
Only Ctrl+Alt+Del works.
Any idea?
Thanks.
Jara

I am having a similar problem using the mapping workbench inside JDev 10.1.2.18.38
In one of my pojo classes I extend DescriptorEventAdapter and implement the following method.
public void postUpdate(DescriptorEvent event) {
Rebuild, refresh, click on the event tab in the mapping workbench and it hangs. Have to Ctrl+Alt+Del.

DBCA hangs after clicking finish

Hi can anyone help me please.
dbca hange after clicking finish.oracle 10.2.0.1
dbca log below
[TaskScheduler timer] [18:3:23:529] [SQLEngine.initialize:-3] Starting Reader Thread...
[TaskScheduler timer] [18:3:23:550] [SQLEngine.initialize:-3] Waiting for m_bReaderStarted to be true
[TaskScheduler timer] [18:3:23:579] [SQLEngine.reInitialize:-3] Reinitializing SQLEngine...
[TaskScheduler timer] [18:3:23:591] [SQLEngine.initialize:-3] Execing SQLPLUS/SVRMGR process...
[AWT-EventQueue-0] [18:18:33:179] [StoragePage.validate:925] StoragePage: In validate function
[AWT-EventQueue-0] [18:18:33:186] [Verifier.validateTemplate:1629] StorageType == 0
[AWT-EventQueue-0] [18:18:34:760] [DBCAWizard.onFinish:1139] m_bFinishClicked: true
[AWT-EventQueue-0] [18:18:36:271] [DBCAWizard.onFinish:1139] m_bFinishClicked: true
[AWT-EventQueue-0] [18:19:40:238] [DBCAWizard.onFinish:1139] m_bFinishClicked: true
[AWT-EventQueue-0] [18:21:55:717] [DBCAWizard.onFinish:1139] m_bFinishClicked: true
please help

Hi;
Please check thread
Re: dbua - finish button hangs
Regard
Helios

SAP BW 640-----SAINT HANGS AFTER CLICKING START

Hi Everybody,
We are on stack 9 on the source BW 640. I am trying to take the stack to 22 as a prerequirement for unicode conversion, and the upgrade to BI 7.0.
In this regard there is a dependency on PI_BASIS to be on 2005, and BI_CONT to be on 353. Currently we are on PI_BASIS 2004, and BI_CONT 352 on the source.
We have extracted the appropriate installation packages for the above components. When we run SAINT to install these components, and click START it just hangs. It does not take me to the next window.
At least SAINT used to take me to the next window after clicking start, but one change I did was to update the kernel to 221, saint was still hanging after clicking start, again updated the kernel to 274 which is the latest release for NW 2004. I also have the latest version of R3Trans, and tp. SAINT still hangs after clicking start button. No logs are getting generated in \usr\sap\trans\log. No files are getting generated in \usr\sap\trans\tmp.
I restored the database to what it was before we initiated the SAINT process. Still SAINT hangs after clicking start button.
In STMS-overviewu2014system-sap system-all the checks work fine(connection, transport directory, transport tool). Likewise in SAINT-utilities-check-transport tool----every thing looks good.
Why is SAINT hanging after clicking start button, can we downgrade the kernel to what it was before (level 155).
Any input is greatly appreciated.
Thank you.
Ramesh Srinivasan.

Thank you so very,very much. We are currently using a 640 gui. We tested with 710 gui and saint after clicking start does not hang.
So we are assuming that 710 gui will solve the problem.
Thanks once again. A very timely help. You bet I'll touch base with you if I run into issues.
RS

System hang after clicking "Run" to launch "SBO_Welcome.hta"

Hi,
My client encounters a pop up window "Open File - Security Warning" upon logging into SAP.
It is a message to run "SBO_Welcome.hta" which is located on "
SERVER\B1_SHR\Help\EN".
When the "Run" button is clicked to launch the above mentioned file, the system will hang.
Also, the error below will be displayed when we force shut down the above pop up window from Task Manager.
Error:[NCM Main].[Main] The RPC server is unavailable. (Exception from HRESULT: 0x8007068A)
The above issue is encountered on a specific workstation only.
Kindly suggest if anyone knows how to resolve this.
Thank you.
Yadana

Hi,
Bala is correct. this installation is corrupt. Uninstall and install with Full administrator rights and doesr the use profile have acess to the shared folders like B1_SHR, check for the firewall setting .
Regards,
Rakesh N

ESS MSS UWL Approval Step Hanging After Clicking Approve

Working on ESS MSS implementation using UWL to approve work items.
Approval task (TS17900101) is sending workitem to UWL, but when I click Approve it just hanging and gives me the processing circle forever.
Binding from the workflow looks like this:
'X' @0E\QAssign Value@ @9T\QGets data for...@ &BACK_BUTTON_VISIBLE&
&FORM_STANDARD& @0E\QAssign Value@ @9T\QGets data for...@ &FORM&
'APPROVEREQUEST' @0E\QAssign Value@ @9T\QGets data for...@ &FORM_SCENARIO_STAGE&
'X' @0E\QAssign Value@ @9T\QGets data for...@ &SAVE_DRAFT_BUTTON_VISIBLE&
'HRASRB' @0E\QAssign Value@ @9T\QGets data for...@ &PROCESSOR_ROLE&
&NOTIFY_VIA_MAIL& @0E\QAssign Value@ @9T\QGets data for...@ &NOTIFY_VIA_MAIL&
&BUSINESS_STATUS& @0E\QAssign Value@ @9T\QGets data for...@ &BUSINESS_STATUS&
'X' @0E\QAssign Value@ @9T\QGets data for...@ &FORM.SUPPRESS_SAVE&
'00000' @0E\QAssign Value@ @9T\QGets data for...@ &FORM.FORM_SCENARIO_VERSION&
Binding to to the workflow as follows:
&PROCSTATE& @9S\QReceives data from...@ @0D\QAssign Value@ &PROCSTATE&
&WORKITEM_ID& @9S\QReceives data from...@ @0D\QAssign Value@ &STEP_OBJECT.GUID&
Program exit: CL_HRASR00_POBJ_WF_EXIT is in place.
Can I please have assistance getting the Approval button to process the Approval?

Resolved - There was a role issue - testing the process with another used account worked.
Looks like it was set up correctly.

FireFox Hangs after I close multiple tabs

When ever I close more than 7 tabs Firefox will hang for a good 20-30 seconds if I close 10+ it will hang till I end task.

Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do NOT click the Reset button on the Safe mode start window or otherwise make changes.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
You can check for problems with the sessionstore.js and sessionstore.bak files in the Firefox Profile Folder that store session data.
Delete the sessionstore.js file and possible sessionstore-##.js files with a number and sessionstore.bak in the Firefox Profile Folder.
*Help > Troubleshooting Information > Profile Directory: Open Containing Folder
*http://kb.mozillazine.org/Profile_folder_-_Firefox
Deleting sessionstore.js will cause App Tabs and Tab Groups and open and closed (undo) tabs to get lost, so you will have to create them again (make a note or bookmark them).
*http://kb.mozillazine.org/Multiple_profile_files_created

Z87-G45 hangs after clicking on OC Genie

For starters, I'm not IT techie guru, just a noob.
What happens is that after I click on the OC Genie button, the comp will hang as it boots up at the "STARTING WINDOWS" just before the 4 balls appear.
I hv set my comp to "OPTIMAL MODE" F6.
I used to have the Z77A-G43 & I just click on the OC Genie button & all was smooth.
Wonder why am I facing this issue now.
My setup
Intel i7-4770k 3.5ghz 8mb LGA1150
Z87-G45 Gaming mainboard
Windows7 Home Premium 64k
Corsair Vengeance 1600 16GB kit CL9 (2 x 8GB)
MSI GTX760 Twin Frozr Gaming 2GB GDDR5 PCI-E OC
Seasonic X-Series 750W Modular Gold PSU
Samsung 840 PRO SSD series
Appreciate if the experts here can help to guide me.
Tks & much appreciated

Quote from: Froggy Gremlin on 14-February-14, 13:45:50
Did you uncheck Auto Restart so as to get the BSOD error code? That will tell what was needed to correct it.
Yes sifu I did before I started the movie
Quote from: Froggy Gremlin on 14-February-14, 13:45:50
If the BIOS has the settting VDroop, set it to 100%. Also, enter the OC Section of the BIOS Sub Section 'CPU Features' and set all the power limits (w) to 255, Power Duration (s) to 60 or 128. Overspeed Protection set to disabled. Make sure EuP 2013 is disabled.
Ah~~~so~~~~~~ ok I will do this
Quote from: Bernhard on 14-February-14, 14:15:29
If ever you want to inspect any crashes, then do the following:3. Click on the Technical detail link and you will see something that is similar to this:
This will provide you with a host of information, including any error and BSOD codes which are needed to ascertain the cause of the crash.
Trust this can assist you in finding the data of the crashes that you have experienced.
Tks Bernhad for ur tips, now I go the reason for the crash
Description
The computer has rebooted from a bugcheck. The bugcheck was: 0x00000124 (0x0000000000000000, 0xfffffa8010e32028, 0x00000000ba000000, 0x0000000052000402). A dump was saved in: C:\Windows\MEMORY.DMP. Report Id: 021414-4009-01.
As I've mentioned in my initial post, I'm so noob at this I hv no idea wat the desc is talkin abt

Need help troubleshooting problem: Flash hangs after using Firefox (on mac) back button - works fine on all other browsers

to reproduce:
1. click on a flash button that takes you to a new html page
2. hit the back button on browser
3. flash button hangs
I've included a test page as an example below.
the bug is specific to having used the flash button and is specific to the Mac version of firefox. The PC version seems to work fine.

What is the address of the first page? The only thing that link you posted in your information was the page that says, "now hit the back button and see if flash hangs after clicking on the flash button".

Iphoto hangs after upgrading to Yosemite and latest iPhoto version

It tells me the library needs upgrading, and starts to search the library. The progress bar suggests something is happening then hangs after about 99% completion. I have had to force close twice after several hours stuck at that point and then start the whole process from scratch when I restart.

Have you followed these instructions - http://www.fatcatsoftware.com/iplm/Help/rebuilding%20a%20corrupted%20iphoto%20li brary.html
iPhoto Library Manager > Help > Rebuilding a corrupted iPhoto library
Printable help
Rebuilding a corrupted iPhoto library
If you have an iPhoto library that is corrupt and causing iPhoto to crash or otherwise be unusable, iPhoto Library Manager provides the ability to rebuild your library based on the information found in its library data files. Note that iPhoto also has a built-in rebuild function that can be sometimes be used to repair a corrupted library database. You can find instructions on how to use that on Apple's website at http://support.apple.com/kb/HT2638 (iPhoto 6 or later) or http://support.apple.com/kb/HT2042 (iPhoto 5 or earlier).
iPhoto Library Manager's rebuild works differently, in that instead of trying to repair the library in place, it creates a brand new library and tries to reimport the entire contents of the original library into the new one, including reconstructing albums, photo metadata, etc. Note that rebuilding a library has all the same limitations as other photo transfer operations as far as what can and can't be copied between libraries. Also, depending on how badly damaged the library is, iPhoto Library Manager may or may not be able to piece together some or all of the library metadata.
To start a rebuild, select the library you would like to rebuild, then choose the "Rebuild Library" item from the "Library" menu. You will be prompted to choose a location for the rebuilt library, and whether or not you want iPLM to scavenge orphaned photos it finds in the library package. Once you've made your choices, iPLM will examine the library and rebuild the library structure and photos as best it can, then display you a preview of what it was able to find. If your library is badly damaged and the preview is missing a lot of content from the original library, this can save you from going through with a rebuild that won’t end up being of much help.
Once you've had a chance to examine the preview, if you want to go forward and create the rebuilt library, click the "Rebuild" button in the upper right. iPhoto Library Manager will create a new library and start importing the contents of the original library into the new one.
Scavenging photos
In some cases, either the iPhoto library database is too damaged for iPhoto Library Manager to be able to salvage any information from it, or the library data is incomplete and there are photos that still exist inside the library package, but iPhoto has lost track of them. In these cases, you may want to check the "Scavenge orphaned photos" checkbox when choosing a location for the rebuilt library. After iPhoto Library Manager has read the library data as best it can, it will perform an additional pass through the package and locate any photos that are no longer referenced in the library database. Any additional photos that are found will be included in the rebuild, and a new "Scavenged Photos" album will be created in the rebuilt library containing any scavenged photos.
LN

Powerbook G4 hangs after few minutes of usage

Since February 06 I have a PB G4: 1.67GHZ, model Powerbook5,8
Since this weekend it hangs after a few minutes of usage.
I tried a whole load of possible solutions, like resetting the RAM, removing the battery and holding the powerbutton for 5 seconds...I even held it once for half a minute, but that didn't help. Checking the harddrive with disk utility (tried it often, but only once did the PB work long enough to get the end result: hard drive is healthy).
Often, when it hangs, I can get it to work by simply turning it off and on again. That gives me another window of 2 minutes of usage! Handy throughout the day when I need a file, or a document: I simply boot the machine, get the file and shut it down.
Carbon copy to an external HD does not work: the system hangs a few minutes after copying.
I installed a utility named applejack, and the first time I tried it, I got an interesting error: there were errors with the USB controller or USB bus, and system hangs. I didn't make a screenshot so this is out of the top of my head.
This was interesting because when I tried to make a HD copy (and believe me: I tried lots and lots of times), the system freezes first, and then an error about not unmounting a device popped into the screen. As if the touchpad, keyboards, and all other i/o devices stop working, and the system goes on for a few seconds more.
Sometimes the system just hangs, sometimes I get that black kernel panic screen.
Just before writing this, I tried the hardware test on the install CD once more:
Held down the option key, chose the hardware test -> quick test and..
system hangs after completion of the test
A message appeared in the bottom-left corner. Several lines of information, starting with:
"ERROR, Write to location ZERO detected!!, Loc zero was originally zero
Current File: Localization/en/Scripts/enAHTscript.sc"
etc
I live on a nice island in the Caribbean, so popping into the nearest Apple store means getting on a flight to Miami first.
What -if any- are my options? Is there something I can try to do myself before shipping it to Apple? Opening the case, checking this or that?
By the way, I originally posted this in the Titanium folder, but someone mentioned that I might actually have a Aluminum PB.
see http://discussions.apple.com/message.jspa?messageID=2074854#2074854

hi joeuu,
I have 1.5GB mem: one 512 stick and one 1GB and I already tried the sticks one at a time: it hangs with the original 512, it hangs with the 1GB and it hangs with them together in both possible slot settings.
I managed to copy the panic.log in /Library/Logs/ and here it is:
Fri Apr 7 15:27:21 2006
panic(cpu 0 caller 0x000A8D00): Uncorrectable machine check: pc = 00000000000AF340, msr = 0000000000141020, dsisr = 42000000, dar = 000000000280C200
AsyncSrc = 0000000000000000, CoreFIR = 0000000000000000
L2FIR = 0000000000000000, BusFir = 0000000000000000
Latest stack backtrace for cpu 0:
Backtrace:
0x00095698 0x00095BB0 0x0002683C 0x000A8D00 0x000A7F90 0x000ABC80
Proceeding back via exception chain:
Exception state (sv=0x41381A00)
PC=0x000AF340; MSR=0x00141020; DAR=0x0280C200; DSISR=0x42000000; LR=0x000AF158; R1=0x2211B8E0; XCP=0x00000008 (0x200 - Machine check)
Backtrace:
0x404E9F24 0x404E1F6C 0x404E7B2C 0x002CEFB8 0x41C3F2C8 0x002BC0E8
0x002CDA70 0x002BC690 0x002BBB4C 0x002BBA5C 0x404E3954 0x404E3B98 0x002CE900 0x002CD7C8
0x000A9814
Kernel loadable modules in backtrace (with dependencies):
com.apple.driver.AppleUSBTrackpad(1.3.0f1)@0x41c3d000
dependency: com.apple.iokit.IOUSBFamily(2.2.5)@0x404aa000
dependency: com.apple.iokit.IOHIDFamily(1.4.3)@0x32671000
com.apple.driver.AppleUSBOHCI(2.2.5)@0x404df000
dependency: com.apple.iokit.IOUSBFamily(2.2.5)@0x404aa000
dependency: com.apple.iokit.IOPCIFamily(1.7)@0x323bf000
Exception state (sv=0x402ABA00)
PC=0x00000000; MSR=0x0000D030; DAR=0x00000000; DSISR=0x00000000; LR=0x00000000; R1=0x00000000; XCP=0x00000000 (Unknown)
Kernel version:
Darwin Kernel Version 8.2.2: Mon Aug 22 18:43:11 PDT 2005; root:xnu-792.5.11.obj~1/RELEASE_PPC
Now what can we read from this?
I see in here "AppleUSBTrackpad" and "AppleUSBOHCI".
Referring to my original post: I have seen an error (a few days ago, when working with applejack) that also mentioned USB.
I'm very afraid that this is a hardware issue. Reading through some other posts, I saw something about a ribbon that gave problems. What are your thoughts?

Problem in reading data from serial port continuously- application hangs after sometimes

I need to read data from two COM port and order of data appearance from COM port is not fixed.
I have used small timeout and reading data in while loop continously . If my application is steady for sometime it gets hangs and afterwards it doesnt receive any data again.
Then I need to restart my application again to make it work.
I am attaching VI. Let me know any issue.
Kudos are always welcome if you got solution to some extent.
I need my difficulties because they are necessary to enjoy my success.
--Ranjeet
Attachments:
Scanning.vi ‏39 KB

billko wrote:
Ranjeet_Singh wrote:
I need to read data from two COM port and order of data appearance from COM port is not fixed.
I have used small timeout and reading data in while loop continously . If my application is steady for sometime it gets hangs and afterwards it doesnt receive any data again.
Then I need to restart my application again to make it work.
I am attaching VI. Let me know any issue.
What do you mean, "not fixed?" If there is no termination character, no start/stop character(s) or even a consistent data length, then how can you really be sure when the data starts and stops?
I probably misunderstood you though. Assuming the last case is not ture - there is a certain length to the data - then you should use the bytes at port, like in the otherwise disastrous serial port read example. In this case, it's NOT disastrous. You have to make sure that you read all the data that came through. Right now you have no idea how much data you just read. Also, if this is streaming data, you might want to break it out into a producer/consumer design pattern.
Not fixed means order is not fixed, data from any com port can come anytime. lenght is fixed, one com port have 14 byte and other 8 byte fixed..
Reading data is not an issue for me as it works nice but I have a query that why my application hangs after sometime and stops reading data from COM PORT.
Kudos are always welcome if you got solution to some extent.
I need my difficulties because they are necessary to enjoy my success.
--Ranjeet

Built-in restore session hangs/freezes with too many tabs in Fx 29

Hi, I've used the Session Manager add on for awhile, ever since a previous 'upgrade' to Firefox tended to not save sessions after a crash.
The upgrade to version 29 has rendered Session Manager unusable, as documented here:
https://support.mozilla.org/en-US/questions/1000544?esab=a&as=aaq
However I've determined that this seems to be not a problem with Session Manager, but with Firefox's built-in restore functionality. This is because though Session Manager no longer shows at startup, Firefox's native session restore does, and Session Manager can still be accessed through the "Tools" menu. It simply crashes with even a couple hundred tabs, let alone the 1-3k tab sessions I normally use.
Experimentation has demonstrated several things. (Both session restore and Session Manager work the same way, which tells me that Session Manager is probably built on the session restore function, simply adding support for multiple sessions and better autosaving.)
1. If I try to restore a large session, even if I remove almost all of my tabs from the restore, it will start to open everything, then (apparently) hang without loading any of the default tabs, and then freeze if I try to do anything at all, including clicking on the search box, trying to scroll, or clicking on another tab.
2. If I try to open a session with one window and one tab, it will open.
Not sure if this is relevant, but if I clicked on another tab before it froze, when I do a session restore from the old session it will open with that one that I clicked as the default tab.
It used to be that Firefox would only load the last tab I was on for each window, and then load others when I clicked on them. I kind of suspect that the upgrade has Firefox now trying to either load all tabs at once (rather than only when I clicked on them, as previously), or at the very least trying to get the metadata from all the pages.
I know that the sensible solution is to not have more than a few dozen tabs at any one time. But I'm not really a sensible person I've spent the past three hours trying to downgrade. I'm dedicated enough to my silly and obsolescent browsing method that I imagine I will keep trying to downgrade, security and time wastage be damned, until the issue is fixed.
On the other hand, it occurs that there may already be a patch or new add-on which addresses this issue, and that would be a lot easier than downgrading, which Mozilla quite intentionally makes painfully difficult. Is there an easier way to get my multi-k tab sessions back?
Thanks,
LK
PS: OS is Ubuntu 12.10. I have automatic updates disabled but periodically upgrade my whole system from the Terminal. My last system-wide upgrade was yesterday, the penultimate one was sometime in April, which is why I think the problem starts with Fx 29.

Hi, I'm a Tab junky...and I'm not changing. I have this issue also. After 2 weeks of utter frustration, not liking any of the roll backs, etc, I dove into other browsers....and found Comodo IceDragon, which is based of Firefox 26.0.... but better. I can't even describe how stable it is, even compared to FF26.
The only glitches were bringing in my history and passwords. I had to use Password exporter to deal with passwords and had to export my bookmarks and history to Chrome, then into IceDragon because it could not do it directly. But Comodo tech support was fast and very helpful!!
Give it a roll. It's like old home week, but better.

Firefox 8 hangs after posting updates to wordpress site

After upgrading to Firefox 8 (then 8.0.1) I can browse the internet fine, but when I edit a post on my wordpress blog, and click update, it hangs and spins. When I check the site on my phone I see the site took the update but I can't access it anymore through the computer. Only after rebooting can I access the site once more. I'm running Windows 7 on a PC

Your Firewall does not recognize the new version of Firefox and is blocking it from connecting. Clear all instances of Firefox from your Firewall programs list. Let your Firewall re-detect the new version of Firefox and give Firefox the necessary permissions in your Firewall. See:
http://support.mozilla.com/en-US/kb/Cannot+connect+after+upgrading+Firefox
http://support.mozilla.com/en-US/kb/Firewalls

I have 10.8.3 installed. I use Cisco VPN but this hangs after 57 minutes and 35 seconds. I disconnect but can't reconnect straight away but have to wait about 10 minutes then have another 57 minutes

I use a mac with 10.8.3 installed. I use Cisco VPN & citrix receiver to connect to work via my home wireless which connects & works brilliantly but then hangs after 57 minutes and about 35 seconds. I disconnect but can't reconnect straight away although it goes through the motions but doesn't find a connection. I have to wait about 10 minutes (or restart the MAC) then it connects fine again and I have another 57 minutes. I previously used 10.6 for a while without any problems and then the VPN just stopped connecting? after trying to resolve without success I upgraded the OS hoping that this might fix the issue which it has but created this other problem! I can live with it but thought there may be some way to correct this surely. I'm not heavily technically minded and have read reports about the racoon service may be causing this but not sure how you do this very simply step by step
Thank you for any ideas you can give

I use a mac with 10.8.3 installed. I use Cisco VPN & citrix receiver to connect to work via my home wireless which connects & works brilliantly but then hangs after 57 minutes and about 35 seconds. I disconnect but can't reconnect straight away although it goes through the motions but doesn't find a connection. I have to wait about 10 minutes (or restart the MAC) then it connects fine again and I have another 57 minutes. I previously used 10.6 for a while without any problems and then the VPN just stopped connecting? after trying to resolve without success I upgraded the OS hoping that this might fix the issue which it has but created this other problem! I can live with it but thought there may be some way to correct this surely. I'm not heavily technically minded and have read reports about the racoon service may be causing this but not sure how you do this very simply step by step
Thank you for any ideas you can give

2.1.1 through 3.0EA - SQLDeveloper hangs after clicking on SQL tab of view

Similar Messages

Maybe you are looking for