2 4404's and WCS how to add an addition 4404

We have two 4404's and WCS. The 4404's are almost maxed out. We have an addition 4404 which we would like to add to the group of 4404's. What is the best way to do this?
Thanks

If both on-line 4404 share the same configs (particulary the SSID and other stuffs) then copy the config into the new one (make sure the new one is off-line so IP addresses won't clash).
Change the IP addresses of the new 4404.
Add into WCS.

Similar Messages

  • How to add/create additional page in Crystal Report Layout SAP B1

    Hi,
    I wanna ask about How to add/create additional page in Crystal Report Layout SAP B1 ?
    I want when user print Purchase Order then on last page also print some page like Penalty Clause etc.
    Pls help me to find the solution.
    Br,
    Thomas Marsetyo

    Hi,
    In your report footer, set it to create a new page before it is printed (In 'Section Expert', select the Report Footer -> 'Paging' tab -> Check 'New Page Before' checkbox). Throw your Terms & Conditions into the Report Footer section.
    If you already have a Report Footer that you want to keep, just split the footer into two sections (Right-click the Report Footer section -> 'Insert Section Below') and follow the same procedure for the newly created section.
         Check this Link
    http://stackoverflow.com/questions/9232239/adding-an-additional-page-to-end-of-a-crystal-report
    http://www.crystalreportsbook.com/forum/forum_posts.asp?TID=18960
    Regards,
    Manish

  • Windows 8 and PSE7 and PSE11 how to add actions

    I changed over to Windows 8.  PSE 7 downloaded and opens up just fine.  I cannot seem to find any info on how to add actions to PSE7.  Windows 8 is not setup like 7.  There is no start button.  You cannot input programdata to find the hidden files.  I downloaded PSE11 trial version thinking it was just PSE 7..........same thing, downloaded no problem, opens up but how do you add actions?   I used many actions to resize the file, sharpen, and a few makeover actions by Florabella.  I would love to be able to use those again.   Thank you.

    You probably need to do some study on how Microsoft expect Windows 8 to be used, especially if you don't have a touch screen.
    Two thoughts
    1. If you don't have a touch screen, Adobe Reader Touch may not be the best choice. It is much more limited than the regular Adobe Reader. Did you pick it for a reason, or just because Microsoft encouraged you into their App Store?
    2. Try a right click, sometimes seems to substitute for a touch off the edge. I know you can't just use the mouse as if it were touch.

  • How to add an additional email account in Mail?

    Hi,
    I set up my main 'Hotmail' email address in 'Mail' about a year ago but have never used the Mail App since. I now have a 2nd email address (university) and it is hosted through 'Exchange Labs' which is basically Hotmail/MSN I think. I cannot check my emails in each one without logging out and logging in whilst openinging and closing several web pages which is a nuisance.
    I was told I could link these 2 accounts in Mail and would make life easier. However, I went to add an additional account and it's asking me for the server info - (mail.server.com) which I have no idea what Exchange Labs use. I looked at my settings for my Hotmail address and when I was setting it up I used my 'izymail' subscription to make it work. However when I go into Mail, it shows no new emails, or any of my old ones. I think i'll have to play around with it for a few hours before I figure out what's wrong but can anyone offer any advice?
    How to link an 'Exchange Lab' email account or make sure my existing hotmail account is still linked properly?
    Thanks in advance!

    Unless Hotmail is required under EU law to provide their full service free of charge, you'd have to have a paid Hotmail account to be able to send and receive email with Mail.
    As for the Exchange Labs, that's something your university is doing, so you'd need to call their student computing helpdesk for the settings to enter in Mail to setup your account for that. You can't link these two accounts, but you can have Mail send and receive messages through both accounts individually, assuming you meet the requirements and have them setup properly. It's not hard, you just need to get the necessary info from your university IT department, as well as have POP access to your Hotmail account, which they do charge for in the U.S.
    Mulder

  • How to add estimated additional charges to PO lines

    Hi all,
    As a business need I want to add estimated additional charges to PO lines like bank expenses, transportation and misc duties.
    it was available with process manufacturing inventory items by using aquisition cost window.
    But, how could it be applied with discrete inventory items??
    if anyone has a solution plz advise.
    Thanks

    Dear Walid,
    There is no standard functionality available in Oracle to capture the Estimated Additional Charges. You have to create a custom component for this....
    Regards
    Merlin Rajesh

  • Show and Share: How to add thumbnail for uploaded by URL

    Hi all,
    I upload video by URL in Show and Share. Can I manually add thumbnail for video? and how to?
    Thank you very much.
    Bintasan Mokkamakkul

    As per docs, the default behavior for show and share is to assign a
    thumbnail based on the length of the video:
    Check out:
    http://www.cisco.com/en/US/docs/video/digital_media_systems/5_x/5_3/showandshare/user/guide/edit-delete.html#wp1079137
    TABLE:  Please match the # for each section:
    If your video is ... 
    1. less than 3 seconds long
    2. Between 3 and 8 seconds long
    3. 8 seconds or longer
    It uses this frame for the thumbnail...
    1. 0 seconds
    2. 4 seconds
    3. 8 seconds
    If you have a video that is longer than 8 seconds, but the title shot only lasts for 5 seconds, the automatically generated thumbnail may not contain your video title. Or, if you recorded a message, the system may have captured an unflattering facial expression for the thumbnail. Use this procedure to correct the situation.
    http://www.cisco.com/en/US/docs/video/digital_media_systems/5_x/5_3/showandshare/user/guide/edit-delete.html#wp1079137
    The procedure to modify the thumbnail is listed in the link above. You
    need to go to your uploaded videos and click "Edit Video" then follow
    the instructions above to move the slider where you want the thumbnail
    to be.
    Please keep in mind that video editing is only possible for some video
    formats:
    Table 6-1 Video Format Editing Support
    http://www.cisco.com/en/US/docs/video/digital_media_systems/5_x/5_3/showandshare/user/guide/edit-delete.html#wp1080725
    I hope this helps!
    Cheers!
    T.

  • Aperture Library-referenced and managed-how to add to...

    I'm trying to put all my images in one library. 
    Right now, I have a library that contains some referenced images, and some managed images. 
    I want to make the entire library referenced.  That is, I want all of th original images stored seperatley from the Aperture Library. 
    Should I reconnect (consolidate) the images that are currently referenced and then proceed to make all of them referenced, or can I select the images that aren't referenced and add them to the same folder where my other originals currently stored?
    Thanks

    For the ones currently managed: File -> Relocate Masters. or Relocate Original
    Regards
    TD

  • Altering existing column as notnull and then how to add primarykey

    Msg 5074, Level 16, State 1, Line 2
    The object 'UQ__customer__B61ED7F40D668B7F' is dependent on column 'customerid'.
    Msg 4922, Level 16, State 9, Line 2
    ALTER TABLE ALTER COLUMN customerid failed because one or more objects access this column.

    Can you try this one 
    CREATE TABLE [dbo].[Customer]([S.No] [int] NOT NULL,[Customer_id] [int] NOT NULL,
    CONSTRAINT [UK_customerid] unique CLUSTERED ([S.No],[Customer_id]))
    alter table [Customer] alter column [Customer_id] varchar(50)
    Error:
    Msg 5074, Level 16, State 1, Line 1
    The object 'UK_customerid' is dependent on column 'Customer_id'.
    Msg 4922, Level 16, State 9, Line 1
    ALTER TABLE ALTER COLUMN Customer_id failed because one or more objects access this column.
    Alter table [Customer]
    drop CONSTRAINT [UK_customerid]
    alter table [Customer] alter column [Customer_id] varchar(50)
    Please Mark This As Answer if it helps to solve the issue

  • How to add 2 Additional Monitor into my iMAC using ONE Thunderbolt

    1. I would like to attach 2 units of Samsung 27" which supports maximum resolution of 1920 by 1080 into a single Thunderbolt. How should I do that?
    2. As my other Thunderbolt is kept for Storage purpose and my Firewire is used to plugin my external sound card.
    Any good suggestions
    and please suggest me that, whether the performance quality of the picture on the both Samsung 27" will be compromised or not?? Will I have exact quality as in my iMac or different?
    What kind of cable should I buy.
    My Samsung monitor supports HDMI and DVI Input.
    All together I will be having 3 monitors (iMac, Samsung , Samsung)

    DanStan, Welcome to the discussion area!
    FYI, this is the discussion area for the iMac G4.
    The iMac G4 does not have a mini-DVI output.

  • How to add an additional fields in VAR Service Desk?

    Dear ALL,
    I work in VAR company and we use SAP VAR Service Desk. Our Customer has his own HP Service Desk system. When they creates ticket in SAP VAR Service Desk they are allways creates internal Service Desk number in their HP Service Desk. Now they ask us to create the new field named as "Customer SD number". I searched for the invisible fields but nothing found. And I think it should be like:
    1) Field named as "Customer SD number" and the input field for the Customers HP Service Desk Number
    2) Field on the main scrren of Service Desk where is all tickets.
    But this only my assumption, I didn't made like this work before.
    May be there is standard schema? I read the integration, but I can not do this because we have other customers with their own Service Desk systems.
    Please help.

    Dear Ahsan Rizvi
    you have take ABPER help
    Documentation of the FM BAPI_PO_CHANGE says:
    Function module BAPI_PO_CHANGE enables you to change purchase orders. The Change method uses the technology behind the online transaction ME22N.
    As we can insert a new item in the ME22N, it will allow us to insert a new PO Line using this FM.
    Regards,
    shankar

  • How to add new additional field in my selection screen?

    Hi,
    In the BEx ,I have key and name in my report.While seeing the report, heading for  customer number is coming and heading not coming for customer description.I need to have it in my report.
    I.e
    Customer     !     (This heading is missing)
       7     GABRIEL CHEMIE GMBH - AUSTRIA
       9     BERGER PAINTS BANGLADESH LTD.
    Any tips?  Points will be given.
    Regards,Jaheer

    Hi Jaheer ,
                     If you talking Abuot heading in out put screen then use TOP-OF-PAGE
    or Else you use "Write:/ " Statement in you program...So that when first line is complete it will go to next line...
    What I understand from your Question....
    Souman

  • How to add 15 days to the current date

    Hi everyone,
    I have the following doubt.
    I stored the current system date in to a variable.Now I want to store the date which is 15 days after the current date in to a new variable.
    ie current date:1-aug-09
    later date:1-aug-09 + 15 days ie 16-aug-09.
    Plz help me in solving this problem.
    Thanks & Regards,
    srinivas

    jaligamasrinivas wrote:
    I used String variable to store the current Date.
    Now in new string variable i want to store the date after 15 days from current dateSee reply #2. String is not the right type, to be doing date arithmetic, just like it wouldn't be the right type to do numeric arithmetic. You wouldn't store integer values as strings and ask how to add them up, would you?

  • How to add other 2 control files at ASM in linux RAC

    Hi Experts,
    I am new for RAC .
    the vendor build a RAC for us. I found there are only one control file in system.
    we use oracle 10.2.0.4 at ASM with RAC in redhat linux 5.
    how to add 2 additional control file to ASM for RAC ?
    Please provide a procedur in detail.
    Thanks
    Jim

    Hi damorgan & Friends,
    I could not find some infomration to add control into ASM . I can do this job( see below procedure) in no ASM .
    My question, our database locates at ASM and control file with a system auto-number ( fully qualified filename ) as
    +DATA1/SALE/controlfile/current.256.690290159
    How do I physical copy and rename other 2 contril file in directory and modify location in pfile?
    I saw some paper to use request as an alias (such as +dgroup2/control/ctl.f). i can not image to copy/rename control.
    Please help me!!
    Thanks
    Jim
    ========added control file for no ASM database and works=====================
    1)
    SQL> create pfile from spfile;
    File created.
    2)
    SQL> show parameter control_file
    NAME TYPE VALUE
    control_file_record_keep_time integer 7
    control_files string C:\ORADATA\ORCL\CONTROL01.CTL
    3)
    SQL> shutdown immediate
    Database closed.
    Database dismounted.
    ORACLE instance shut down.
    4) modify pfile add additional control file2/3 as
    control_files='C:\Oradata\ORCL\control01.ctl','C:\Oradata\ORCL\control02.ctl','C:\Oradata\ORCL\control03.ctl'
    and physical copy control01.ctl and raname as control02.ctl,control03.ctl
    5)
    SQL> startup pfile='C:\oracle\product\10.2.0\db_2\database\initORCL.ora';
    ORACLE instance started.
    Total System Global Area 167772160 bytes
    Fixed Size 1247900 bytes
    Variable Size 62915940 bytes
    Database Buffers 100663296 bytes
    Redo Buffers 2945024 bytes
    Database mounted.
    Database opened.er database mount;
    6)
    SQL> Create spfile from pfile='C:\oracle\product\10.2.0\db_2\database\initORCL.ora';
    File created.
    7) check control file info under pfile environment
    SQL> show parameter control_file
    NAME TYPE VALUE
    control_file_record_keep_time integer 7
    control_files string C:\ORADATA\ORCL\CONTROL01.CTL,
    C:\ORADATA\ORCL\CONTROL02.CTL
    , C:\ORADATA\ORCL\CONTROL03.CT
    L
    8)SQL> shutdown immediate
    Database closed.
    Database dismounted.
    ORACLE instance shut down.
    9) startup as spfile environment.
    SQL> startup
    ORACLE instance started.
    Total System Global Area 167772160 bytes
    Fixed Size 1247900 bytes
    Variable Size 62915940 bytes
    Database Buffers 100663296 bytes
    Redo Buffers 2945024 bytes
    Database mounted.
    Database opened.
    10) check control info for spfile environment
    SQL> show parameter spfile
    NAME TYPE VALUE
    spfile string C:\ORACLE\PRODUCT\10.2.0\DB_2\
    DATABASE\SPFILEORCL.ORA
    SQL> show parameter control_file
    NAME TYPE VALUE
    control_file_record_keep_time integer 7
    control_files string C:\ORADATA\ORCL\CONTROL01.CTL,
    C:\ORADATA\ORCL\CONTROL02.CTL
    , C:\ORADATA\ORCL\CONTROL03.CT
    L

  • How to add a property to BasicPersistence SDK example.

    Hi,
    I see in the BasicPersistence example that it creates a property call BPIData and persists this in the IDML.  I would like to add another property call MyProperty.  Do you know how to add an additional property to the example which is persisted in the IDML, so now it would persist 2 properties? 
    Thanks,
    Dave

    for example:
    javax.jcr.Session session = resourceResolver.adaptTo(Session.class);
    String parentPath = "/content/blah"; // or whatever your parent path is
    String nodetype = "nt:unstructured"; // or whatever other node type you require
    Calendar calendar = Calendar.getInstance(); // or whatever date
    Node node = session.getNode(parentPath).addNode("nodename", nodetype);
    node.setProperty("myproperty", calendar);
    session.save();

  • How to add reports to menu

    hi all,
    i want to add report that i have made in my menu, i m using oracle developer 6i forms and reports
    how to add ??
    Regards
    Abhi.

    As i understood...
    i have just designed menu in form build 6iBy this you mean that you want to call report from drop down menu.
    when user select particular report it should open up and yes there are parameters in my reports
    well i m passing the parameters to my query in data modelBy this i can understand that you are passing parameter to query data model etc. By how user will pass the parameters values to the reports. Is there any pre-designed form for report calling or you want to use report's default parameter form?
    Anyway there is standard code for calling reports through forms in 6i like...
    DECLARE
      vParamList PARAMLIST;
    BEGIN
      vParamList:=GET_PARAMETER_LIST('TEMP');
      IF NOT ID_NULL(vParamList) THEN
        DESTROY_PARAMETER_LIST(vParamList);
      END IF;
      vParamList:=CREATE_PARAMETER_LIST('TEMP');
      ADD_PARAMETER(vParamList,'PARAMETER_NAME',TEXT_PARAMETER,'PARAMETER_VALUE');
      ... ADD THE ABOVE LINES ACCORDING TO YOU NUMBER OF PARAMETERS...
      Run_Product(REPORTS, 'REPORT_PATH\REPORT_NAME.REP',ASYNCHRONOUS,RUNTIME,FILESYSTEM,vParamList,NULL);
    END;-Ammad

Maybe you are looking for