2 Documents into 1
How do I convert two separate PDF files into one file?
No way with just the free Reader. It can be done with Acrobat.
Similar Messages
-
Acrobat XI Pro Won't Convert 206 Page Word Document into PDF
Hi there
As menetioned above, Acrobat XI Pro Won't Convert my 206 Page Word Document into a PDF. The Word document was originally a PDF file that I converted to Word and it has split all the text into sections.
It sounds like converting a PDF into Word isn't the best way to edit, re-format and then save as a PDF again. I would love to hear your advice on this.
Thanks very much for your help!
FionaFirst before you recreate the PDF from the Word Document.
In word: Open Document
Next open a new Blank docment
switch back to Word click on the ¶ button
scroll to of go to very end of docment.
click just to right of the perion in the last sentence.
now go to very beginning of document
Hold down the Shift and click to the right of first letter in document.
Now choose copy.
Now switch to Blank document
Choose Paste special.
Now choose Text only.
If works all the words will be there spaced correct but with no ¶'s.
Now insert returns as desired.
Now save as a docx file under a different name.
IF you are on a Mac use the following directions:
go to File menu > Print > PDF Hold down PDF button until Context menu pops up.
Choose adobe PDF.
follow steps when the first window opens.
Save as PDF in desired location.
Now open the PDF in Acrobat. Document should be properly formatted and ready to go.
AS you've found The conversion is not seamless. Acrobat doesn't distingish between automatic end of line breaks and Returns and you have to put the pieces back again. I wish Adobe and MS would get over the jealouscy of each other and share howcode works so Thatapplications could work seamlessly together. BUt they never will. -
How do I merge more than one PDF document into one singular pdf using adobe viewer touch on a microsoft surface?
Or using the Adobe PDF Pack https://www.acrobat.com/
-
How can I paste a pdf of a Publisher document into Pages so I can edit?
I have been asked to print a document that was created in Publisher on a PC. I have been sent a pdf of the document, which is A4, printed both sides, with four A6 text boxes on each side, with the same artwork and text in each box. The trouble is, the layout is wrong so when it is cut into four the margins are not even. I have Acrobat 7.0 Standard (which is know is very old) but I haven't used it much and can't work out how to edit the pdf. At the moment all I can do is copy and paste the entire document into Pages but then I can't extract just one A6 text box from the rest. If I could do that it would be a breeze to set it up correctly in Pages so that it works when cut into four A6 pieces. When I go to Get Info it says it is not locked and I have permission to read and write.
Can anyone explain these things to a beginner, please?
Thanks!Chris
There are several ways we can go about this.
*1. In Adobe Illustrator* you can open the pdf file directly and chop out the bits you don't want and resave them individually. There maybe problems with fonts not being embedded as it comes from a PC where such things are mostly verbotten.
*2. In Acrobat* you can do some editing and avoid the fonts issue. But the procedure is a bit more involved.
If it helps, you need 2 things:
+Menu > Tools > Advanced Editing > Select Object Tool+ and
+Menu > Split Document… / Crop Pages…+
Using this you can unpick the pdf file removing the parts you don't want. Not as simple as it sounds because you need to understand why some objects select with others and why some are unselectable which has to do with grouping, masking and compounding.
*3. In Preview* cut apart the multiple pages and parts of each page. To split the multiple pages you will have to open the set and then delete the pages you don't want and save the remaining page with a new name.
To delete a page click on it in the sidebar and hit delete.
To crop a page use the +Select Tool+ in the top of the window and drag around the part of the page you want then +Menu > Tools > Crop+ and resave with a new name. Be aware this does not actually get rid of anything outside the select it just crops the view of it.
*4. Which brings us to Pages*. Having divided the pdf into individual page files you can then drag them into Shapes on your page the size of the parts you want to show.
When you click on the shape with page in it a little bar shows up underneath with +Edit Mask+. Click on the +Edit Mask+. You will see the shape, which is the mask, gets a grey dotted outline with white resizing boxes on the corners and mid points. If you need to adjust the crop or size of the shape drag on these.
Behind the shape outline is the image with the cropped parts outside shown greyed out. The greyed out part is the hidden part. If you click outside the shape but on the greyed out part of the image you select the image itself and can pull at its corners or sides to change its shape. Or if you just click on the greyed part of the image you can move it around so that it moves relative to the shape cropping it.
If you have several sections to be shown in each shape, you can move them one at a time to show each one. Say you have 4: 2 top and 2 bottom, option drag the shape with the picture in it to make 4 copies. Then in each one pull the image to reveal in turn top-left, top-right, bottom-left and bottom-right.
Do this till you have all the parts separated and rearrange them where you want.
*A bonus tip:* Cut out a step by opening Preview, next to Pages, with the multiple pages showing in the sidebar. You can drag the pages from the sidebar directly into the shape in Pages, without having to divide the .pdf.
Any further questions just ask.
Peter -
Hi there and hello everybody.
I am writing a book and have been using Libre Office and would like a better word processing package.
I have heard that Pages 5 is better than the latest one. I need to be able to put my Libre Office documents
into Pages. Anyone know how to do this please?magathon wrote:
Thanks. So would you say Word is the best processing package? And how do I choose which package 'opens' them.
This is a basic computer skill you might want to learn. You can always control which application opens any document, and the steps below apply to any Mac or Windows computer you use:
Method 1: Drag the document icon on top of the application (Word, Pages, LibreOffice...) icon and release. The system will open the document in the application you dragged it to.
Method 2: Go into the application (Word, Pages, LibreOffice...) and choose File/Open. Locate and select the document, and click the Open or OK button.
Method 3: Select the document icon and choose File/Open With, then choose the application you want to open the document with.
The only time these don't work is when the application cannot open that type of document. For example, you usually can't make a photo editor open a text file. But Word, Pages, and LibreOffice all know how to open text files, RTF files, and Word files.
But if it is important that the document formatting is exactly preserved when exchanging with other Word users, you really should use Word. If you can't afford to pay the retail price for a copy, Microsoft now lets you use Office for $6.99 a month or $69.99 a year. -
How Do I combine 2 InDesign Documents into 1 (in a very particular way)
How do I combine two InDesign Documents into one in a very specific way.
Here's my problem: I have two separate InDesign CS5 files for playing cards. File one is the front. File two is the back.
The company that does my final print production needs the the cards sent as two separate PDFs. One for the card fronts, one for the card backs. Both of these InDesign (and the PDF export) files are arranged in the same way: page 1 is card #1, page 2 is card #2, etc. Nice and simple.
However, I use a different company for producing prototype versions of the decks (the production printer can't do this economically). My prototype producer needs me to send a single PDF where page 1 is Card #1 Back, page 2 is Card #1 Front, Page 3 is Card #2 back, Page 4 is Card #2 front, etc.
The decks I am building usually run 56 cards, but can be as large as 180 cards.
So, what's the easiest way to automate this process? is there a way to combine two separate indesign files by "interleaving" the pages from the two original documents into a new larger document (where I could do a new PDF export)? Or, is there a better way to do this in Acrobat Pro? At the moment I have to resort to drag and dropping each card from one PDF thumbnail pallet to the other. It's really time consuming and mind-numbingly boring. Any Ideas?This script is actually pretty straightforward, so it's a good first
challenge I think.
I would script this in InDesign -- probably because I'm more familiar
with InDesign scripting.
To start learning the InDesign scripting basics, open the ExtendScript
Toolkit (ESTK) which is almost certainly installed on your computer
already. Go to the Help menu, and you'll find an entry there called
Adobe Intro to Scripting. Read that. I think that's the best place to start.
For the script in question, you would want to:
1. make sure both InDesign documents are open. They would both have the
same number of pages. (No scripting involved here, just make sure
they're open before running the script.)
2. loop backwards through the collection of document pages of one of the
documents. (document.pages is the collection you're looking for)
3. use the move() method of a document page to move it. (myPage.move())
4. Learn about the LocationOptions enumerator so that when you move the
page you can tell InDesign if you want to move it before, or after
another page. (LocationOptions.AFTER or LocationOptions.BEFORE)
5. Get a reference to the page in the second document before (or after)
which you want to move the page in the first document.
5. that's basically it
I suggest that as you work your way through this (if you decide to take
up the challenge), you post any questions you may have on the InDesign
Scripting forum here. -
How do I bind multiple PDF Documents into one single document?
I am trying to bind multiple PDF documents into one single document can anyone please help me?
You would need Adobe Acrobat to do that. Reader doesn't have the ability.
-
How do I merge multiple pdf documents into 1 with my iPad ?
How do I merge multiple pdf documents into 1 with my iPad ? We are required by our customer 1 document that includes 4 different documents from different departments. Currently with our PC we can merge PDF files, excel or word files in to 1 PDF document. How can I do the same with our iPads and iPad minis using adobe?
blogs.adobe.com We are excited to announce that Adobe CreatePDF application is now available on iOS. With this, Adobe brings rich, high-fidelity and Acrobat-like PDF creation to the iOS devices. You can now convert all your documents on iPad, iPhone & iPod touch devices to PDF for reliable, secure sharing and viewing across PCs, tablets & Smartphones.
Robert Monsalve
[signature removed by host] -
How do I move a document into a folder in PDF reader on an iPad
How do I move a document into a file in PDF reader on my iPad
When you're looking at the list of documents, touch the Edit button at the upper-right. Then select the file you want to move by touching the check box to its left, and click the Move File icon, it's the third one from the left at the top of the screen. You'll be prompted to "Move selected document" after which the "Choose a location" dialog will appear to allow you to select a destination folder.
-
Hi there,
I am working on my thesis with several Pages documents (for the first time). And I really have searched all over the Internet to find an answer to exactly my question but I cannot find it.
First my question was: How can I import one Pages document into another one? I found the answer on that (I think) and there is nothing else than just make a new section and copy/paste it in.
But then another issue pops up: I cannot [cmd]+A my whole document including the texboxes to paste it in the other Pages document. Then the document will be paste without the textboxes (and I have quite a lot of them in that document) and the text will not be at the right place.
So please explain to me: How I can combine two Pages documents and keep them exactly the way they are? Is that even possible?
I thank you so much in advance!Hi Fruhulda,
I have already tried to mark the textboxes in line but that did not work, and besides then the text and the boxes won't be at the rigt places either. Thank you for your reply . -
How to I convert all the pages in a Pages document into simply pages, eliminating pages called "sections", so I can pick and chose specific pages to drag where I want (without dragging an entire section of pages)?
Insert a Section Break at the foot of each page
or:
Toolbar > Document > Document > uncheck Document Body
This will destroy any content in your document, but I presume that is what you want.
Peter -
How do I convert a word document into a pdf and then upload it to a web site
How do I convert a word document into a pdf and then upload it to a web site so people can read it from my
site with Dreamweaver 4?. How can I do this? Can anyone please help? I'm only a newbie. Thanking you in anticipation.First you need to install a means of printing to pdf from word. I like cutepdf writer ( http://cutepdf.com/Products/CutePDF/writer.asp ). Once installed you will print the doc in word and under the printer selection you choose pdf.
Once you have the file you put it in your local site folders and upload it using Dreamweaver. Be sure to link to it from a page so users can get to it and I would recommend giving the link a target of _black so it will open in a new window (see the properties inspector in DW). -
How can I sort the words in a document into an alphabetical list?
How can I sort the words in a document into an alphabetical list? Thanks!
writer888 wrote:
How can I sort the words in a document into an alphabetical list? Thanks!
Copy the words to the Mac's clipboard (Edit menu> Copy)
Paste into TextEdit
Next open the Edit > Find > Find window in Text Edit.
Highlight a space between two words and Edit menu > copy, paste into the Find field
Next create a return in the middle of your text and copy that and paste into the Replace field
Click Replace All.
Now Edit > Select All and Edit > Copy
Open a Spreadsheet program with Sort ability and paste into the second column cell from the top
place a "a" into the top column cell, select the entire colum
Sort desending order
Now if you need it out of spreadsheet format, then your going to need to copy just the data cells (not the entire column to avoid problems) and Paste "Special" as unformatted text into a word processing program
If you need to get rid of the Returns, do the opposite you did in Text Edit, replace the Returns with Spaces
A chore, but it's rare one needs to sort words into alaphabetical order.
FYI, I used TextEdit and the free LibreOffice (Spreadsheet and Word Processing) for the above effects. -
How to insert a word document or an RTF document into RichTextEditor?
How to insert a word document or an RTF document into af:richTextEditor. I am using Apache POI for reading the Word document and getting its contents. I am able to display the whole content of the document except the table and image within the document. The data in the table is getting displayed as a string and not as a table inside the editor.
Can we insert a word/RTF document into a rich text editor?
Can we insert images into the rich text editor?
The following is the code that I used. On clicking a button the word document has to be inserted into the <af:richTextEditor>.
<af:richTextEditor id="rte1" autoSubmit="true"
immediate="true"
columns="110" rows="20">
<af:dropTarget dropListener="#{SendEmail.richTextEditorDrop}">
<af:dataFlavor flavorClass="java.lang.String"/>
</af:dropTarget>
</af:richTextEditor>
<af:commandButton text="Insert at position" id="cb2">
<af:richTextEditorInsertBehavior for="rte1" value="#{RichTextEditorUtil.docFile}"/>
</af:commandButton>
Java Code: I am using Apache POI for reading the word document.
import org.apache.poi.hwpf.HWPFDocument;
import org.apache.poi.hwpf.extractor.WordExtractor;
public String getDocFile() {
File docFile = null;
WordExtractor docExtractor = null ;
WordExtractor exprExtractor = null ;
try {
docFile = new File("C:/temp/test.doc");
//A FileInputStream obtains input bytes from a file.
FileInputStream fis=new FileInputStream(docFile.getAbsolutePath());
//A HWPFDocument used to read document file from FileInputStream
HWPFDocument doc=new HWPFDocument(fis);
docExtractor = new WordExtractor(doc);
catch(Exception exep)
System.out.println(exep.getMessage());
//This Array stores each line from the document file.
String [] docArray = docExtractor.getParagraphText();
String fileContent = "";
for(int i=0;i<docArray.length;i++)
if(docArray[i] != null)
System.out.println("Line "+ i +" : " + docArray);
fileContent += docArray[i] + "\n";
System.out.println(fileContent);
return fileContent;Hi,
images are not yet supported. Its an open enhancement request for the rich text editor.
For tables, it seems they are supported but in a basic way (just HTML 4 style) if I interpret the tag documentation correct
http://download.oracle.com/docs/cd/E15523_01/apirefs.1111/e12419/tagdoc/af_richTextEditor.html
Frank -
Error while loading valid, schema-related document into xdb
Hi Mark.
I tried to load other xml documents (ftp://ftp.tigr.org/pub/data/a_thaliana/ath1/PSEUDOCHROMOSOMES/) into the xdb.
The documents are related to the same schema as the documents i used until now.
I had to change the schema a bit. Three elements (protein_sequence, cds_sequence, transcript_sequence) are now stored as CLOB instead of VARCHAR2.
My first idea was, that the new documents are not valid, but they are.
The old documents still work. I get an ORA-00600 everytime.
I tried to get some information from the trace file but this did not help really.
I don't believe this will help you but i post it anyway:
Dump file d:\oracle\admin\pdw\udump\pdw_s000_6388.trc
Mon Jan 02 09:21:36 2006
ORACLE V9.2.0.7.0 - Production vsnsta=0
vsnsql=12 vsnxtr=3
Windows 2000 Version 5.0 Service Pack 4, CPU type 586
Oracle9i Enterprise Edition Release 9.2.0.7.0 - Production
With the Partitioning, OLAP and Oracle Data Mining options
JServer Release 9.2.0.7.0 - Production
Windows 2000 Version 5.0 Service Pack 4, CPU type 586
Instance name: pdw
Redo thread mounted by this instance: 1
Oracle process number: 10
Windows thread id: 6388, image: ORACLE.EXE
*** 2006-01-02 09:21:36.218
*** SESSION ID:(23.9078) 2006-01-02 09:21:36.187
QMHD escaped text too long: dstlen=0 dstbuf=/
QMHD escaped text too long: dstlen=0 dstbuf=home
QMHD escaped text too long: dstlen=0 dstbuf=public
QMHD escaped text too long: dstlen=0 dstbuf=sys
QMHD escaped text too long: dstlen=0 dstbuf=xdbconfig.xml
QMHD escaped text too long: dstlen=0 dstbuf=/
QMHD escaped text too long: dstlen=0 dstbuf=home
QMHD escaped text too long: dstlen=0 dstbuf=public
QMHD escaped text too long: dstlen=0 dstbuf=sys
QMHD escaped text too long: dstlen=0 dstbuf=xdbconfig.xml
QMHD escaped text too long: dstlen=0 dstbuf=home
QMHD escaped text too long: dstlen=0 dstbuf=RSCHULZE
QMHD escaped text too long: dstlen=0 dstbuf=PDV70
QMHD escaped text too long: dstlen=0 dstbuf=SCOTT
QMHD escaped text too long: dstlen=0 dstbuf=SCOTT1
QMHD escaped text too long: dstlen=0 dstbuf=SCOTT2
QMHD escaped text too long: dstlen=0 dstbuf=hbachman
QMHD escaped text too long: dstlen=0 dstbuf=pdw_biowh31
QMHD escaped text too long: dstlen=0 dstbuf=pdw_stage
QMHD escaped text too long: dstlen=0 dstbuf=pdw_tigr_chromosome
QMHD escaped text too long: dstlen=0 dstbuf=uniprot
QMHD escaped text too long: dstlen=0 dstbuf=pdw_tigr_chromosome
QMHD escaped text too long: dstlen=0 dstbuf=data
QMHD escaped text too long: dstlen=0 dstbuf=xsd
QMHD escaped text too long: dstlen=0 dstbuf=data
QMHD escaped text too long: dstlen=0 dstbuf=seq1.txt
QMHD escaped text too long: dstlen=0 dstbuf=seq2.txt
QMHD escaped text too long: dstlen=0 dstbuf=seq3.txt
QMHD escaped text too long: dstlen=0 dstbuf=seq4.txt
QMHD escaped text too long: dstlen=0 dstbuf=seq5.txt
*** 2006-01-02 09:36:57.421
ksedmp: internal or fatal error
ORA-00600: internal error code, arguments: [kokbgcip1], [196609], [63], [], [], [], [], []
Current SQL statement for this session:
INSERT /*+ NO_REF_CASCADE */ INTO "PDW_TIGR_CHROMOSOME"."SYS_NT0upV7+xbRnu3KquZIaRFgQ=="("NESTED_TABLE_ID","ARRAY_INDEX","SYS_NC_ROWINFO$") VALUES(:1,:2,:3)
----- Call Stack Trace -----
calling call entry argument values in hex
location type point (? means dubious value)
ksedmp+327 CALLrel ksedst+0
ksfdmp.108+14 CALLrel ksedmp+0 3
_kgerinv+131 CALLreg 00000000 D3E4368 3
kgeasnmierr+19 CALLrel kgerinv+0 D3E4368 4BE2A94 1AF86D4 2
4B56B40
kokbgcip+343 CALLrel kgeasnmierr+0 D3E4368 4BE2A94 1AF86D4 2 4
30001 4 3F
qerocImageIterStar CALLrel kokbgcip+0
t+160
qerocStart+265 CALLrel qerocImageIterStar 237701B4 D3E41E0
t+0
_kokbint+242 CALL??? 00000000 81DFD20 1
kokbeva+338 CALLrel kokbint+0 237700B8 237700FC
..1.42_2.filter.9+1 CALLreg 00000000 D3E41E0
101
insolev.73+164 CALLrel evaopn2+0 237700B8
insbrp.73+1558 CALLrel insolev.73+0 2374A8B4 81DDFF8 1
insrow+173 CALLrel insbrp.73+0
insdrv.73+1302 CALLrel insrow+0 81DDFF8 4B584E4 0
..1.6_1.filter.73+2 CALLrel _insdrv.73+0 81DDFF8
28
..1.5_2.except.29+1 CALLrel _insexe+0 2374A8B4 4B58730
6740
..1.2_1.filter.25+3 CALLrel _opiexe+0 4 3 4B58B24
347
opikpr+512 CALLrel opiall0+0 65 22 4B58D20 0 0 4B58DB8 9C
20 0 0 0 0 0
..1.1_1.filter.34+1 CALLreg 00000000 65 14 4B59980
356
rpidrus.43+167 CALLrel opiodr+0 65 14 4B59980 0
_skgmstack+113 CALLreg 00000000 4B590A0
rpidru+109 CALLrel skgmstack+0 4B590B8 D3E41F0 F618 59941C
4B590A0
_rpiswu2+839 CALLreg 00000000 4B59498
kprball+1537 CALLrel rpiswu2+0 1EA8DD18 102 4B59414 4
1E833D34 102 4B59414 0 59932C
5991DC 4B59498 8
kokbint+1766 CALLrel kprball+0 4B59980 500
kokbeva+338 CALLrel kokbint+0 2374E498 2374E4DC
..1.42_2.filter.9+1 CALLreg 00000000 D3E41E0
101
insolev.73+164 CALLrel evaopn2+0 2374E498
insbrp.73+1558 CALLrel insolev.73+0 25EC7468 7D0BD90 1
insrow+173 CALLrel insbrp.73+0
insdrv.73+1302 CALLrel insrow+0 7D0BD90 4B5AD78 0
..1.6_1.filter.73+2 CALLrel _insdrv.73+0 7D0BD90
28
..1.5_2.except.29+1 CALLrel _insexe+0 25EC7468 4B5AFC4
6740
..1.2_1.filter.25+3 CALLrel _opiexe+0 4 3 4B5B3B8
347
opikpr+512 CALLrel opiall0+0 65 22 4B5B5B4 0 0 4B5B64C 77
20 0 0 0 0 0
..1.1_1.filter.34+1 CALLreg 00000000 65 14 4B5BE70
356
rpidrus.43+167 CALLrel opiodr+0 65 14 4B5BE70 0
_skgmstack+113 CALLreg 00000000 4B5B934
rpidru+109 CALLrel skgmstack+0 4B5B94C D3E41F0 F618 59941C
4B5B934
_rpiswu2+839 CALLreg 00000000 4B5BD2C
kprball+1537 CALLrel rpiswu2+0 1EA8DD18 102 1EA891BC 4
1E833D34 102 1EA8923C 0
59932C 5991DC 4B5BD2C 9
qmskInsertXmlType+ CALLrel kprball+0 4B5BE70 180
1203
qmskStoreXobWithIm CALLrel qmskInsertXmlType+
age+526 0
qmskStoreXob+16 CALLrel qmskStoreXobWithIm
age+0
qmskFlushXob+22 CALLrel qmskStoreXob+0 4BFCFCC 4BE6698 0
_qmeSaveContents+44 CALLreg 00000000
6
qmePreSave+2417 CALLrel qmeSaveContents+0 4BFE790 2 1
_qmtEventFire+259 CALLreg 00000000 D3E4368 3 4BFE8B0
qmxiWriteXobToImag CALLrel qmtEventFire+0 D3E4368 3 4BFE8B0
eInternal+60
qmxiWriteXobToImag CALLrel qmxiWriteXobToImag D3E4368 4B5D418 0 4BFE8B0
eWithHeap+82 eInternal+0 700ECBC 4B5D398 4B5D364
4B5D384 60A09FC 4B5C37C 0 6
D3E4368 C 4B5D418
qmxtgGetOpqImageFr CALLrel qmxiWriteXobToImag D3E4368 4B5D418 0 4BFE8B0
omXob+430 eWithHeap+0 700ECBC 4B5D398 4B5D364
4B5D384 4B5D470 C 6 700ECF8
4B5D418
qmskStoreXobWithIm CALLrel qmxtgGetOpqImageFr
age+370 omXob+0
qmskStoreXob+16 CALLrel qmskStoreXobWithIm
age+0
qmskFlushXob+22 CALLrel qmskStoreXob+0 4BFE8B0 4BFF740 4B5D6FC
_qmeInsertResRow+22 CALLreg 00000000
5
qmeInsertRes+1831 CALLrel qmeInsertResRow+0
qmeLinkInternal+47 CALLrel qmeInsertRes+0
12
qmeCreOrBindRes+33 CALLrel qmeLinkInternal+0 4BFE790 60A5D14 1DFE0323 1D 0
1 1 0 4B5D7A0 4B5D85C 0 0
qmeCreateRes+115 CALLrel qmeCreOrBindRes+0 4BFE790 60A5D14 1DFE0304 1F
1DFE0323 1D 0 1 0 4B5D85C 0 0
4B5D85C 0
qmeuCreateOrUpdate CALLrel qmeCreateRes+0 4BFE790 1DFE0304 1F 1DFE0323
Res+2232 1D 0 0 0
qmhput+393 CALLrel _qmeuCreateOrUpdate
Res+0
_qmhProcessRequestD CALLreg 00000000 1DFE4398
ata+2576
qmpsrun+1220 CALL??? 00000000
opitsk+838 CALLrel qmps_run+0 D3E4368
opiino+698 CALLrel opitsk+0 0 0 D3EA5C8 278A650 3 0
..1.1_1.filter.34+1 CALLreg 00000000 3C 4 4B5F448
356
opirip+662 CALLrel opiodr+0 3C 4 4B5F448 0
opidrv+654 CALLrel opirip+0 32 0 0
sou2o+25 CALLrel opidrv+0
opimai+336 CALLrel sou2o+0 4B5FE1C 32 0 0
BackgroundThreadSt CALLrel opimai+0
art@4+356
77E7B385 CALLreg 00000000
--------------------- Binary Stack Dump ---------------------
========== FRAME [1] (_ksedmp+327 -> _ksedst+0) ==========
Dump of memory from 0x04B56A68 to 0x04B56AE0
4B56A60 04B56AE0 00522AC8 [.j...*R.]
4B56A70 00000000 00000000 00000000 00000000 [................]
4B56A80 FFFFFFFF 0000003F 0D3E4444 01AF86D4 [....?...DD>.....]
4B56A90 0D3E444C 04B56ADC 0283676E 0D3E4444 [LD>..j..ng..DD>.]
4B56AA0 0D3E444C 00000000 00000000 01AF86D4 [LD>.............]
4B56AB0 00000002 00000009 0D3E4368 04BE2A94 [........hC>..*..]
4B56AC0 01A89F00 0D3E41E0 04B56A74 0D3E4368 [.....A>.tj..hC>.]
4B56AD0 04B571F8 015DDE00 02775F44 FFFFFFFF [.q....].D_w.....]
========== FRAME [2] (_ksfdmp.108+14 -> _ksedmp+0) ==========
Dump of memory from 0x04B56AE0 to 0x04B56AEC
4B56AE0 04B56AEC 0078468B 00000003 [.j...Fx.....]
========== FRAME [3] (_kgerinv+131 -> 00000000) ==========
Dump of memory from 0x04B56AEC to 0x04B56B0C
4B56AE0 04B56B0C [.k..]
4B56AF0 02836849 0D3E4368 00000003 081B3444 [Ih..hC>.....D4..]
4B56B00 0D3E41E0 081B3444 081B3444 [.A>.D4..D4..]
========== FRAME [4] (_kgeasnmierr+19 -> _kgerinv+0) ==========
Dump of memory from 0x04B56B0C to 0x04B56B28I have a new problem:
Due to the changes of the schema ( transcript_sequence ... stored as clob) i got an error in a view.
ORA-00932 : incosistent datatypes
The error occurs in V007 in the following rows
extractValue(value(tu),'/TU/TRANSCRIPT_SEQUENCE'),
extractValue(value(model),'/MODEL/CDS_SEQUENCE'),
extractValue(value(model),'/MODEL/PROTEIN_SEQUENCE')
But in V005 there is no error althought there is the row extractValue(value(tu),'/TU/TRANSCRIPT_SEQUENCE'),
the views
create or replace view V007_MODEL(FEAT_NAME,
GENE_SYNONYM,
GENE_SYNONYM_SYN_TYPE,
CHROMO_LINK,
TU_DATE,
TU_COORDSET_END5,
TU_COORDSET_END3,
TRANSCRIPT_SEQUENCE,
URL,
URL_URLNAME,
CURATED,
MODEL_COMMENT,
MODEL_FEAT_NAME,
PUB_LOCUS,
CDNA_SUPPORT_ACCESSION,
CDNA_SUPPORT_ACCESSION_DBXREF,
CDNA_SUPPORT_ACCESSION_IS_FLI,
CDNA_SA_UNIQUE_TO_ISOFORM,
CDNA_SA_ANNOT_INCORP,
MODEL_GENE_SYNONYM,
MODEL_GENE_SYNONYM_SYN_TYPE,
MODEL_CHROMO_LINK,
MODEL_DATE,
MODEL_COORDSET_END5,
MODEL_COORDSET_END3,
MA_AT_METHOD,
MA_AT_ATT_SCORE,
MA_AT_ATT_SCORE_DESC)
CDS_SEQUENCE,
PROTEIN_SEQUENCE)
as
select
distinct
extractValue(value(tu) ,'/TU/FEAT_NAME'),
extractValue(value(tu_gene_synonym) ,'/GENE_SYNONYM/text()'),
extractValue(value(tu_gene_synonym) ,'/GENE_SYNONYM/@SYN_TYPE'),
extractValue(value(tu_chromo_link) ,'/CHROMO_LINK/text()'),
extractValue(value(tu) ,'/TU/DATE'),
extractValue(value(tu) ,'/TU/COORDSET/END5'),
extractValue(value(tu) ,'/TU/COORDSET/END3'),
extractValue(value(tu) ,'/TU/TRANSCRIPT_SEQUENCE'),
extractValue(value(url) ,'/URL/text()'),
extractValue(value(url) ,'/URL/@URLNAME'),
extractValue(value(model) ,'/MODEL/@CURATED'),
extractValue(value(model) ,'/MODEL/@COMMENT'),
extractValue(value(model) ,'/MODEL/FEAT_NAME'),
extractValue(value(model) ,'/MODEL/PUB_LOCUS'),
extractValue(value(accession) ,'/ACCESSION/text()'),
extractValue(value(accession) ,'/ACCESSION/@DBXREF'),
extractValue(value(accession) ,'/ACCESSION/@IS_FLI'),
extractValue(value(accession) ,'/ACCESSION/@UNIQUE_TO_ISOFORM'),
extractValue(value(accession) ,'/ACCESSION/@ANNOT_INCORP'),
extractValue(value(model_gene_synonym),'/GENE_SYNONYM/text()'),
extractValue(value(model_gene_synonym),'/GENE_SYNONYM/@SYN_TYPE'),
extractValue(value(model_chromo_link) ,'/CHROMO_LINK/text()'),
extractValue(value(model) ,'/MODEL/DATE'),
extractValue(value(model) ,'/MODEL/COORDSET/END5'),
extractValue(value(model) ,'/MODEL/COORDSET/END3'),
extractValue(value(attribute_type) ,'/ATTRIBUTE_TYPE/@METHOD'),
extractValue(value(att_score) ,'/ATT_SCORE/text()'),
extractValue(value(att_score) ,'/ATT_SCORE/@DESC')--,
extractValue(value(model) ,'/MODEL/CDS_SEQUENCE'),
extractValue(value(model) ,'/MODEL/PROTEIN_SEQUENCE')
from TIGR t,
table(xmlsequence(extract(value(t) ,'/TIGR/PSEUDOCHROMOSOME'))) p,
table(xmlsequence(extract(value(p) ,'/PSEUDOCHROMOSOME/ASSEMBLY/GENE_LIST/PROTEIN_CODING/TU'))) tu,
table(xmlsequence(extract(value(tu) ,'/TU/GENE_SYNONYM'))) (+) tu_gene_synonym,
table(xmlsequence(extract(value(tu) ,'/TU/CHROMO_LINK'))) (+) tu_chromo_link,
table(xmlsequence(extract(value(tu) ,'/TU/URL'))) (+) url,
table(xmlsequence(extract(value(tu) ,'/TU/MODEL'))) model,
table(xmlsequence(extract(value(model) ,'/MODEL/CDNA_SUPPORT/ACCESSION'))) (+) accession,
table(xmlsequence(extract(value(model) ,'/MODEL/GENE_SYNONYM'))) (+) model_gene_synonym,
table(xmlsequence(extract(value(model) ,'/MODEL/CHROMO_LINK'))) (+) model_chromo_link,
table(xmlsequence(extract(value(model) ,'/MODEL/MODEL_ATTRIBUTE/ATTRIBUTE_TYPE'))) (+) attribute_type,
table(xmlsequence(extract(value(attribute_type),'/ATTRIBUTE_TYPE/ATT_SCORE'))) (+) att_score,
table(xmlsequence(extract(value(model) ,'/MODEL/EXON'))) exon
create or replace view V005_GENE_INFO(FEAT_NAME,
GENE_SYNONYM,
GENE_SYNONYM_SYN_TYPE,
CHROMO_LINK,
TU_DATE,
TU_COORDSET_END5,
TU_COORDSET_END3,
TRANSCRIPT_SEQUENCE,
URL,
URL_URLNAME,
LOCUS,
ALT_LOCUS,
PUB_LOCUS,
GENE_NAME,
GENE_NAME_IS_PRIMARY,
COM_NAME,
COM_NAME_CURATED,
COM_NAME_IS_PRIMARY,
GENE_INFO_COMMENT,
PUB_COMMENT,
EC_NUM,
EC_NUM_IS_PRIMARY,
GENE_SYM,
GENE_SYM_IS_PRIMARY,
IS_PSEUDOGENE,
FUNCT_ANNOT_EVIDENCE_TYPE,
FAE_ASSIGN_ACC,
FAE_ASSIGN_ACC_ASSIGN_METHOD,
GENE_INFO_DATE)
as
select
extractValue(value(tu) ,'/TU/FEAT_NAME'),
extractValue(value(gene_synonym) ,'/GENE_SYNONYM/text()'),
extractValue(value(gene_synonym) ,'/GENE_SYNONYM/@SYN_TYPE'),
extractValue(value(chromo_link) ,'/CHROMO_LINK/text()'),
extractValue(value(tu) ,'/TU/DATE'),
extractValue(value(tu) ,'/TU/COORDSET/END5'),
extractValue(value(tu) ,'/TU/COORDSET/END3'),
extractValue(value(tu) ,'/TU/TRANSCRIPT_SEQUENCE'),
extractValue(value(url) ,'/URL/text()'),
extractValue(value(url) ,'/URL/@URLNAME'),
extractValue(value(tu) ,'/TU/GENE_INFO/LOCUS'),
extractValue(value(alt_locus) ,'/ALT_LOCUS/text()'),
extractValue(value(tu) ,'/TU/GENE_INFO/PUB_LOCUS'),
extractValue(value(gene_name) ,'/GENE_NAME/text()'),
extractValue(value(gene_name) ,'/GENE_NAME/@IS_PRIMARY'),
extractValue(value(com_name) ,'/COM_NAME/text()'),
extractValue(value(com_name) ,'/COM_NAME/@CURATED'),
extractValue(value(com_name) ,'/COM_NAME/@IS_PRIMARY'),
extractValue(value(tu) ,'/TU/GENE_INFO/COMMENT'),
extractValue(value(tu) ,'/TU/GENE_INFO/PUB_COMMENT'),
extractValue(value(ec_num) ,'/EC_NUM/text()'),
extractValue(value(ec_num) ,'/EC_NUM/@IS_PRIMARY'),
extractValue(value(gene_sym) ,'/GENE_SYM/text()'),
extractValue(value(gene_sym) ,'/GENE_SYM/@IS_PRIMARY'),
extractValue(value(tu) ,'/TU/GENE_INFO/IS_PSEUDOGENE'),
extractValue(value(funct_annot_evidence),'/FUNCT_ANNOT_EVIDENCE/@TYPE'),
extractValue(value(assign_acc) ,'/ASSIGN_ACC/text()'),
extractValue(value(assign_acc) ,'/ASSIGN_ACC/@ASSIGN_METHOD'),
extractValue(value(tu) ,'/TU/GENE_INFO/DATE')
from TIGR t,
table(xmlsequence(extract(value(t) ,'/TIGR/PSEUDOCHROMOSOME'))) p,
table(xmlsequence(extract(value(p) ,'/PSEUDOCHROMOSOME/ASSEMBLY/GENE_LIST/PROTEIN_CODING/TU'))) tu,
table(xmlsequence(extract(value(tu) ,'/TU/GENE_SYNONYM'))) (+) gene_synonym,
table(xmlsequence(extract(value(tu) ,'/TU/CHROMO_LINK'))) (+) chromo_link,
table(xmlsequence(extract(value(tu) ,'/TU/URL'))) (+) url,
table(xmlsequence(extract(value(tu) ,'/TU/GENE_INFO/ALT_LOCUS'))) (+) alt_locus,
table(xmlsequence(extract(value(tu) ,'/TU/GENE_INFO/GENE_NAME'))) (+) gene_name,
table(xmlsequence(extract(value(tu) ,'/TU/GENE_INFO/COM_NAME'))) com_name,
table(xmlsequence(extract(value(tu) ,'/TU/GENE_INFO/EC_NUM'))) (+) ec_num,
table(xmlsequence(extract(value(tu) ,'/TU/GENE_INFO/GENE_SYM'))) (+) gene_sym,
table(xmlsequence(extract(value(tu) ,'/TU/GENE_INFO/FUNCT_ANNOT_EVIDENCE'))) (+) funct_annot_evidence,
table(xmlsequence(extract(value(funct_annot_evidence),'/FUNCT_ANNOT_EVIDENCE/ASSIGN_ACC'))) (+) assign_acc
I have a second question.
Usually I use WEBDAV or FTP to load the xml documents.
There are 5 documents for TIGR Arabidopsis. Now it works to load the documents into the xdb. I usually use WEBDAV. But when I load the first document I get an error. Nevertheless the document is shredded. Because the WEBDAV error message is not meaningful, I used PL/SQL.
I tried it like this
insert into TIGR values (xmltype(bfilename(USER,'/home/pdw_tigr_chromosome/data/CHR1.R5v01212004wos.xml'),nls_charset_id('AL32UTF8')))
( I deleted the expressions " xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="tigrxml.xsd" " in the document before).
But this didn't work.
So I tried
insert into TIGR values (xmltype(xdbURIType('/home/pdw_tigr_chromosome/data/CHR1.R5v01212004wos.xml').getClob(),'tigrxml.xsd',1,1))
and it worked. But it seemed to need more time than per WEBDAV or FTP ( but probably I err ). It took 1h 48m for a 74MB file.
When I load the documents with PL/SQL the document is not shredded. At least the document has its original size when i have a look at the repository per WEBDAV and not the usual 0 bytes. But the data is correctly stored in the xmltype table TIGR
Message was edited by:
Nick_MD -
Error while release Billing document into Accounting -Help me
Hi,
While releasing SD billing document into Accounting,i am getting the blow error.Please advice me
Valuation with material cost estimate: error with product "000AA696"
Message no. KE350
Diagnosis
In Profitability Analysis (CO-PA), the system tried to valuate a line item using the current standard cost estimate.
In order to determine the current plan period, the system needs to read the valuation segment of the material master.
The system has found that the current plan period is not filled forproduct "000AA696" in plant "OB01".
Display material (View: Costing)
The system looked for the material cost estimate using costing key "YG3", as defined in the Customizing settings for CO-PA.
System Response
The document cannot be processed.
Procedure
Contact your system administrator.
Thanks
SunithaHi Sunitha,
Please check your settings in KEPC. Check which costing key you have assigned to your plant. Also check which rule you have set for the costing key. For example if you have assigned "current standard cost estimate acc. to entry in mat. master" then check here is no current standard cost estimate for material.
Regards,
Abhisek
Maybe you are looking for
-
Help, How to configure cisco ASA5505 to permit access to internal LAN
Hi everyone, Once more I am stuck into another dilemma , I have configured a Cisco ASA 5505 to allow VPN access from outside to my LAN using Cisco VPN Client software. The connection is establishing properly with the ip address from my VPNPool. From
-
In addtion to that, when i connect my phone to my computer it states that "USB is not recognized".......does this mean something could be wrong with my cord? Also it also states that "Device can not be installed", why is that? Your Help is much appr
-
Lion Server VPN Service/Class C IPs/Bonjour
In order to deploy Lion Server's VPN service, you obviously are required to enter an IP range to assign. We are running a standard class C network here, with systems running on 192.168.1.x. The problem is that if a user is accessing the VPN from a re
-
Bought photoshop on the adobe online however lost the serial number
so this time last year i bought the photoshop lightroom online and updated my macbook and lost the serial number help!
-
Can't see created Software Component in CMS
Hi I have created a software component in the SLD (NW 2004s SP2). Now i want to develop it. But when i try to add this software component to my track in the CMS, i can't find it. I suggested in an another forum post, i try to push the "refresh" butto