(-200474): Specified operation did not complete, because the specified timeout expired

What are the conditions under which this error (-200474) occurs in the NI-DAQmx driver?
I am looking for something similar to this: http://digital.ni.com/public.nsf/allkb/485201B647950BF886257537006CEB89. Also a more detailed description of this error would be nice.
I encountered this error using a PCI MIO-16E-4 board while reading from an analog input channel. I have a loop that continuously measures values. To obtain a value, I start a task, average a number of 10 000 samples, and then stop that task, and so the loop repeats itself again.

Hi Casper,
The interesting thing is that my application works fine for a number of hours (more than 5-10 h) and then at some point, I get this error.
>How fast are you trying acquire your data?
Once every second I start a task, read 10 000 individual samples, average them, and then stop the task. So I guess it's pretty intensive.
>This is error tells you there are not enough samples to read within the specified timeout.
It can be that during the starting and stoping the task, one of the DAQmxReadAnalogScalarF64 calls returns me this error at some point, because the driver doesn't have time to give me a value anymore. I will try to lower the 1Hz sampling rate a bit, but I will leave the sequential DAQmxReadAnalogScalarF64 calls running at the speed of my app.
A possible solution to my problem would be to configure the driver to average 10 000 samples for me, and then return me a single value. I would appreciate any idea of how to configure the task to do this using the NI-DAQmx API.
Could you also give me some plausible scenarios which could result in an occurrence of this error?
Regards,
Cristian

Similar Messages

  • 2.0 - 0x803d0006 - The Operation Did not complete within the time allotted

    I integrated MBAM 2.0 into ConfMgr 2012 SP1 on Srv2008R2 & SQL 2008R2 box. All MBAM components lying on the same server. Network is encrypted, using https, clients and server have certificates from inside PKI.
    - Manual encryption attempt with MBAM client fails ends with "An error has occurred". During this, there is no error codes anywhere.
    - During automatic triggering of MBAM client, 0x803d0006 comes up into event viewer.
    - Laptops are partitioned with extra Bitlocker partition as they should be
    - Laptops are able to communicate with
    MBAMRecoveryAndHardwareService/CoreService.svc
    - Group Policies are applied with necassary MBAM settings. Reporting point is disabled because ConfMgr integration takes care of that.
    - During the error on a client side, I don´t see any logs in event viewer on a server side

    I solved this By creating GPO policies only via MBAM node. Previously I had a mixup with policies, because I had configured Bitlocker Encryption policies also. With MBAM, only MBAM´s own policies should be configured.
    So this error massage is occured only because of GPO conflict. I also noticed, that you can easily mix up things with MBAM´s policies also, if configuring different encryption settings and causing conflict between them (like encryption package, keys etc).
    So if you don´t know, what you are doing (like me, hehe), leave encryption polices as default.
     

  • Error (2901) The operation did not complete successfully because of a parameter or call sequence that is not valid. (The parameter is incorrect (0x80070057))

    We are trying to convert a physical windows 2003 R2 32 bit server to a VM using VMM 2008 R2 with all updates installed. Each time when we scan the system on VMM, it gets this message: Error (2901) The operation did not complete successfully because of
    a parameter or call sequence that is not valid. (The parameter is incorrect (0x80070057)). If I use disk2vhd.exe to convert only C drive, I get parameter is incorrect. Any ideas?
    Bob Lin, MCSE & CNE Networking, Internet, Routing, VPN Networking, Internet, Routing, VPN Troubleshooting on http://www.ChicagoTech.net How to Install and Configure Windows, VMware, Virtualization and Cisco on http://www.HowToNetworking.com

    Hi Sir,
    >> If I use disk2vhd.exe to convert only C drive, I get parameter is incorrect. Any ideas?
    >> gets this message: Error (2901) The operation did not complete successfully because of a parameter or call sequence that is not valid. (The parameter is incorrect (0x80070057)
    Please refer to following article regarding this error :
    http://blogs.technet.com/b/hugofe/archive/2010/07/09/abe.aspx
    Best Regards,
    Elton Ji
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected] .

  • This item could not be crawled because the repository did not respond within the specified timeout period. Try to crawl the repository at a later time, or increase the timeout value on the Proxy and Timeout page in search administration. You might also wa

    HI,
    I got the error message in the crawl log as below after performing the Full Crawl
    This item could not be crawled because the repository did not respond within the specified timeout period. Try to crawl the repository at a later time, or increase
    the timeout value on the Proxy and Timeout page in search administration. You might also want to crawl this repository during off-peak usage times.
    To overcome the above error,many forums have suggested me to increase the time out which is under Farm level settings.But if time out gets increased,performance impacts as well.
    So please suggest me to overcome this error without increasing the timeout.Thanks in advance
    Regards,
    Sudheer
    Thanks & Regards, Sudheer

    Hi,
    I understand that you get the error message when performing a full crawl. I have seen similar cases caused by IE proxy settings. You can try to edit the Internet Options>Connections>LAN settings. Uncheck ‘Automatically detect settings’.
    For more information, please refer to this site:
    Search error: crawler could not connect to the repository:
    http://social.technet.microsoft.com/forums/en-US/sharepointadminprevious/thread/c230ab36-8d0b-4c25-bf86-33136d17642b/
    Thanks,
    Entan Ming
    Entan Ming
    TechNet Community Support

  • Error installing DS 4.0: "previous operation did not complete"

    When I try to install DS 4.0 I get the following error:
    Installer has detected that a previous operation did not complete.  Do you want to resume?
    I had previously installed Information Platform Services 4.0 but the install crashed.  Now I am unable to uninstall IPS and I can't install anything else. ( trying to uninstall IPS from Programs and Features just blinks and then doesn't do anything)
    Has anyone faced this issue?  Can someone PLEASE tell me how to uninstall IPS and/or circumvent the error so I can get DS installed?

    I had the same problem a while ago. I solved this by
    1. Go to folder C:\Program Files (x86)\SAP BusinessObjects\InstallData
    2. Under this file you'll find "InstallManifest.sqlite" file. You need to open this file through SQLite editor. You can download it https://addons.mozilla.org/en-US/firefox/addon/sqlite-manager/ as an add-on to your firefox.
    3. There are 13 tables in this database. Go to "DUTransaction" table. You will see "Committed" column change the value if there is any zero 0 value to 1.
    4. Save and close the file.
    5. Restart your installation.
    This should solve your problems.

  • Error message during copy of new version, it says the operation cannot be completed because the item foxfire is in use.

    During downloading of 7.0 Foxfire, during the copy I get an error message that says the operation cannot be completed because the item Foxfire is in use.

    If there are problems with updating or with the permissions then easiest is to download the full version and trash the currently installed version to do a clean install of the new version.
    Download a new copy of the Firefox program and save the disk image (dmg) file to the desktop
    * Firefox 7.0.x: http://www.mozilla.com/en-US/firefox/all.html
    * Trash the current Firefox application to do a clean (re-)install
    * Install the new version that you have downloaded
    Your profile data is stored elsewhere in the Firefox Profile Folder, so you won't lose your bookmarks and other personal data.
    * http://kb.mozillazine.org/Profile_folder_-_Firefox

  • HT3275 Time Machine backup not completed  because "the backup disk image ....sparsebundle already in use"

    Time Machine backup not completed because the "backup disk image"/Volumes/Data/MacBookAir.sparsebundle" is already in use. ??

    Reboot the TC.. this is most common issue since Mountain Lion.
    Look at the More Like This just on the right column.

  • The operation is not available because the grid is not editable - In PWA 2010 SP2 Project Schedule Page

    Hello,
    I am trying to edit a project via PWA (as delegate of the owner).
    When clicking "Edit" on the Project Schedule, I get a message: "The operation is not available because the grid is not editable".
    Does somebody knows what does that mean?
    Regards,
    Barak

    Hi Barak 
    What happens if you try with your session, meaning without delegation?
    Does the user you are acting delegate for has project edit permissions in PWA?
    When the user himself tries to edit the schedule, what happens?
    Hope this helps.
    Guillaume Rouyre - MBA, MCP, MCTS

  • I receive this error message "The operation cannot be completed because the original item for "backup" cannot be found.

    I performed a clean install of Lion, then upgraded to Yosemite. Now, i am trying to restore files and programs from my backup in my time capsule but when i connect to the backup folder i receive this error message "The operation cannot be completed because the original item for "backup" cannot be found.
    I previously had mavericks installed and was able to backup and restore just fine. I do believe that within the time since i last performed a backup or restore there was an update for the time capsule that i ran using my iPhone. I need a solution to this issue.

    Yosemite can take a very long time to index the backup.. and it seems to be impossible in my own testing to get back beyond the latest one.
    If you cannot manage a migration.. which I guess is what you are trying to do.. see if you can do a full restore to a USB drive plugged into your computer.

  • The embedded controller (EC) did not respond within the specified timeout period - Flex 15D

    Hello,
    I have an IdeaPad Flex 15D, and I have had several problems (mostly processor-related) in the time I have been using it. I contacted Customer Support twice, and finally did a system reset a few days ago after being told by Lenovo Support that my choices for fixing the problem were 1) Reset, or 2) Pay for a premium service to diagnose the problem. Needless to say (again), I went with option 1. So far I have not had any noticible problems with the processors, but there is a certain error showing up in the Event Viewer that I am concerned about. Lenovo Support has been next-to-useless troubleshooting my problems thus far, so I'm taking them here. The error is as follows:
    (Event ID 13)
    The embedded controller (EC) did not respond within the specified timeout period. This may indicate that there is an error in the EC hardware or firmware or that the BIOS is accessing the EC incorrectly. You should check with your computer manufacturer for an upgraded BIOS. In some situations, this error may cause the computer to function incorrectly.
    Sounds like the BIOS needs an update, right? Well, I went straight to the Flex 15D drivers page, and guess what? I quote the drivers page: Bios update is not required for this product. Not required? So, Lenovo ships a broken BIOS and then refuses to support it? I don't know if Lenovo employees ever read this forum, so this might not be the best way to get their attention, but I am so fed up with Customer Support and I want this issue to be known to more than just a few unhelpful 'tech support' people. The Flex 15D isn't one of the more popular laptops out there, so I can't expect anyone reading this to be able to duplicate this problem or really provide any support, but if you have any suggestions whatsover, please reply to this thread. Like I said, I want people to know, and hopefully we can get Lenovo's attention so they can fix this problem.
    Best regards,
    Owen Dugmore

    Hi,
    I understand that you get the error message when performing a full crawl. I have seen similar cases caused by IE proxy settings. You can try to edit the Internet Options>Connections>LAN settings. Uncheck ‘Automatically detect settings’.
    For more information, please refer to this site:
    Search error: crawler could not connect to the repository:
    http://social.technet.microsoft.com/forums/en-US/sharepointadminprevious/thread/c230ab36-8d0b-4c25-bf86-33136d17642b/
    Thanks,
    Entan Ming
    Entan Ming
    TechNet Community Support

  • I have a license of the PSE 11, recently expired, to find out what was going on I have PSE 11 uninstalled. Reinstall does not work because the license has expired. Can I purchase the upgrade version of PSE 12 now or should I buy a full program?

    I have a license of the PARTY 11, recently expired, to find out what was going on I have PSE 11 uninstalled. Reinstall does not work because the license has expired. Can I purchase the upgrade version of PSE 12 now or should I buy a full program?

    Ok thank you, I better can wait then.
    Greetings, Evert Annen
    Op 8 sep. 2014 19:45 schreef "Peru Bob" <[email protected]>:
        I have a license of the PSE 11, recently expired, to find out what
    was going on I have PSE 11 uninstalled. Reinstall does not work because the
    license has expired. Can I purchase the upgrade version of PSE 12 now or
    should I buy a full program?  created by Peru Bob
    <https://forums.adobe.com/people/Peru+Bob> in Photoshop Elements - View
    the full discussion <https://forums.adobe.com/message/6711348#6711348>

  • Tried to upgrading ipad 1 from itunes and l guess it did not complete because all I have showing on the ipad is the itunes logo with the usb cable. when l try to connect it to my system, it resquest that a driver be used to install the device. Pls help

    Tried to upgrading ipad 1 from itunes and l guess it did not complete the process because all I have showing on the ipad is the itunes logo with the usb cable. When l try to connect it to my system, it resquest that a driver be used to install the device. Please help! How do I restore?

    Restoration is relatively simplistic. Here's whatcha do. Plug your ipad in, open itunes, now if itunes doesn't recognize it then you may have a problem, anywho, click on the ipad in the devices interface and go to the info tab, click restore, and it'll be just like it was when it left the factory. To get you data back, it should ask if you would like to use a backup, just select the backup you want and you'll be good to go. That is if you regularly backed up your iPad.

  • CS6 CS5  "operation can not complete because there isn't enough memory (RAM) available"

    Hi,
    I told the client (rather foolishly it seems) that I could open a DXF in Illustrator CS6.  I get the message shown even though I have 8g of ram
    any ideas??
    It refuses to open in cs5 as well
    file is 4.2mb
    thanks
    G
    iMac 27" 2.88 i5
    OSX 10.6.8
    8g ram
    CS6
    CS5

    A .dxf of 4.2Mb seems large, must be something else in there than a die line. Did they send you a .pdf with this so you know what this looks like. Also if they did not put dimensions on there that can be a hassle as often you have to try every unit you figure out what units the operator was wiring in.
    If you can post the file (hightail has a free trial), I have 32gb and can try this for you.

  • Installer has detected that a previous operation did not complete with another user

    Hi experts,
    I actually have a SAP Business Objects 4.0 SP4 and I try to upgrade to 4.1 SP2.
    The documents I found on the topic clearly let me understand that it could be totally and easily achieved.
    However, I keep having this error message :
    In the CMC, I successfully disabled all the servers (except the CMS) then I restarted the SIA in order to kill all the active sessions.
    Could you please give me some counsels?
    Thanks a lot!

    That's OK, I finally found the solution :
    SAP BO 4.0 SP02 update to SP05 "Incomplete Operation Detected"
    Thanks!

  • Event Log Error: Microsoft.ResourceManagement: System.Data: System.InvalidOperationException: The requested operation cannot be completed because the connection has been broken. at System.Data.SqlClient.SqlInternalConnectionTds.ExecuteTransaction

    Has anyone ever seen this? Any Clues?

    I had set up a clean environment some weeks ago, and just today I started configuring MA's. When I got to the FIM MA I wanted to do an import, sync and export, and when I got to the export it seemed to run endless. In the eventlog I got the same errors as
    you did.
    Didn't find any real hints in SQL or in the FIM requests history... After doing a good old reboot it just started working...
    http://setspn.blogspot.com

Maybe you are looking for

  • Looking for help in making my computer good enough to play games

    I bought a computer from Best Buy right after Christmas. It's a HPE-410y. I'm pretty happy with it in terms of speed and ease of use. I'm glad to be finally done with freaking Vista and blue screens of death. Anyho, a buddy of mine wants me to play B

  • Email with HTML (content/type). Is it possible?

    Hello! I have this script to send e-mail form my PDF form: event.target.submitForm({cURL :"mailto: "+ vEmail +"?subject=" + vSubject +"&body=" + vBody,cSubmitAs:"PDF",cCharset:"utf-8"}); I would like to send e-mail with content/type HTML. Is it possi

  • Create a custom multiple selection on screen - not selection-screen block

    Dear expert, I created a text field on screen for input selection, e.g field bname for USR02-BNAME. How can i create a CUSTOMIZE multiple selection plus a paste (from clipboard) feature on this screen (e.g. SCREEN 0002) like standard selection-screen

  • 5g Ipod.  Problem with Firmware 1.2.1

    Like many out there, I upgraded my iTunes software to ver. 7 and subsequently the iPod firmware to ver. 1.2.1. This resulted in the iPod "freezing" problem many others have reported. I've gone through the exercise (twice) of uninstalling iTunes 7, in

  • VISUALIZER in a new window

    Hello, sorry for my very bad english! I want to ask if it is possible to open a further itunes windows to display visual effects. Because i want to connect a beamer with my notebook and want to display the visual effects on the beamer and on the Disp