2009 Mac Pro not letting me upgrade to Mavericks nor 10.8

I have a 2009 Mac Pro with OS 10.7.5 installed, it running perfectly fine but for some reason it's not letting me update to 10.8 nor 10.9. Mavericks works totally fine from ssd card mounted on a usb dock but when I try to use the SSD inside or the hard drive the Mac Pro came with it does not boot up. I was getting a problem when trying to upgrade Mavericks from the store where Mac Pro wouldn't boot, it will just show a question mark so I reinstalled OS 10.7.5. When trying to install Mavericks from a usb drive, Mac Pro does not see none of the internal hard drives and for some reason does not even let me eject the optical bay, has this happen to anyone if yes, what you do to fix the problem.

"Image" was not a reference to the physical drive, but rather the actual bytes representing the version of Mac OS X on the drive.
• If you built Mac OS X on that drive from the Mac OS X that shipped with another Mac, it will be trouble.
• If you built the Mac OS X on that drive from a "Full Retail", "Purchased" (for $0, but it still counts as a purchase) version from the Mac App store, it has all Drivers and should work fine.

Similar Messages

Early 2009 mac pro not recognizing DVD drives

My Mac Pro 8 core since upgrading to Mavericks is not recognizing my Blu Ray drive unless I unplug it and re plug it in while hot.....what is this issue?

I think I have a similar sitch. I just bought a rMPB 15 with Mavericks and hooked it up to the same setup of my old 2009 17" MPB. I inserted the Logic Pro 9 install disk in my external LaCie DVD RW drive and the light on the front keeps flashing steadily as if the disk is being read but it never mounts on the desktop. I ejected the disk and installed the Logic Studio Audio Content 1 disk and it mounted fine. I inserted the Logic Pro 9 install disk into the drive on the old 17" and it mounted fine there as well. So I am at a loss as to what the glitch is and I can't be sure if its the DVD RW drive, the rMPB itself, Mavericks, or both or neither or....????

My Early 2009 Mac Pro won't restart after installing Mavericks

I have installed Mavericks on my Early 2009 Mac Pro and all seemed to install just fine but when I restart the Mac then it won't get past a grey screen with Apple logo. It seems that it does get reasonabley far into the startup, it gets passed the grey screen with cricling progress thingmy under the Apple logo, then it flashes very quickly and after that it is a grey screen with the Apple logo and no further.
I did try installing Mavericks when it first came out and I had this problem so I just abandoned and reinstalled Mountain Lion from my Time Machine backup. However I thought that with Mavericks now at 9.1, maybe it would work okay this time but no change. However this time I do want to get it working because the lastest Final Cut Pro X requires Mavericks and I do a lot of video editing.
Here are the things I've tried which have made no difference:
Removed all peripherals, so that now nothing is plugged in except the original Apple Keyboard, my Apple trackpad and my Eizo monitor.
I tried starting it in Safe Boot mode but this made no difference.
I started it up in Recovery mode and it will start in Recovery mode. While in Recovery mode I checked the startup hard drive with Disk Utility, the drive is fine, as and I repaired disk permisions which made no difference.
I zapped the PRAM.
I connected it to my MacBook Pro in Target Disk mode and used ProSoft's Drive Genius 3 to check over the startup hard drive again and check disk permissions and all is well.
It still will not startup
I would be most grateful if someone could assist.

Take each of these steps that you haven't already tried. Stop when the problem is resolved.
Step 1
The first step in dealing with a boot failure is to secure your data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since your last backup, you can skip this step.
There are several ways to back up a Mac that is unable to boot. You need an external hard drive to hold the backup data.
a. Boot into the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.”
b. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, boot the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
c. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
Sometimes a boot failure can be resolved by resetting the NVRAM.
Step 3
If you use a wireless keyboard, trackpad, or mouse, replace or recharge the batteries. The battery level shown in the Bluetooth menu item may not be accurate.
Step 4
If there's a built-in optical drive, a disc may be stuck in it. Follow these instructions to eject it.
Step 5
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to boot, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can boot now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
If you've booted from an external storage device, make sure that your internal boot volume is selected in the Startup Disk pane of System Preferences.
Step 6
Boot in safe mode. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
When you boot in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, your boot volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 6.
If you can boot and log in now, empty the Trash, and then open the Finder Info window on your boot volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then reboot as usual (i.e., not in safe mode.)
If the boot process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 7
Launch Disk Utility in Recovery mode (see Step 1.) Select your startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then reboot as usual.
Step 8
Reinstall the OS. If your Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Step 9
Repeat Step 6, but this time erase the boot volume in Disk Utility before installing. The system should automatically reboot into the Setup Assistant. Follow the prompts to transfer your data from a Time Machine or other backup.
Step 10
This step applies only to older Macs (not current models) that have a logic-board ("PRAM") battery. Both desktop and portable Macs used to have such a battery. The logic-board battery, if there is one, is separate from the main battery of a portable. A dead logic-board battery can cause a boot failure. Typically the failure will be preceded by loss of the settings for the startup disk and system clock. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
Step 11
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.

Mac Pro runs slow after upgrading to mavericks?

I can't figure it out..
Been a mac user sinc Macintosh then mac plus.
First time i have no explanation.
I upgraded my 2010 Dual Quad Mac Pro 96gb ram, ran so very very fast with Sonnet 4 port eSATA and MOTU PCIE 424 card.
Ever since i upgraded it is so SLLLLOOOWWW!!. I have tired re-installing, contacted all the hardware vendors and software vendors, got all the updates.
I cant figure out why it is running like a 20 year old computer?. I get the wheel, Finder hangs allot, will not relaunch. I take out ALL THE THIRD PARTY CARDS, and boot, still runs like a turtle. Adobe creative suite slow, Aperature takes hrs to update library. Tried creating a new library. Still slow. Avid Media composer, Final Cut Pro X is so slow at rendering i can drive to Santa Cruz from Santa Barbara to MAvericks surf spot go surfing and come home to find out it is 95% done. Also copying large 20 gig folders from one internal to another takes hrs. used to take minuts.
I need help! It is so unpleasent using my mac pro now, , miserable user experience. I dread booting as it takes 5 min to go. I have dual monitors. Apple NVIDA card. could it be CUDA? no updates availble. I removed all the third party cards, and nothing happens. Removed all usb, FW, etc pluged in usb mouse from Apple Factory.
What ever happend there must be a patch or fix? all of my friends with Macs all having same slow issue. Please offer some fixes.
1. Is there a way to __Un-install Mavericks? and return my computer back to previous OS? without ruining or formating HD?
It seems like the only solution. I would Purchase a new MAc Pro, but none of my studio takes thunderbolt, and it is so exspensive i am cornerd. I would be so happy if i could just remove Mavericks, instead of taping aspirine all over my Macs. Please Apple send an update that fixes this. Just google it 100,00's of users? we all love Apple, we need you to help us help you! anyone? please help.
Please help!!
Kiind Regards
B

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve your problem.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. All it does is to gather information about the state of your computer. That information goes nowhere unless you choose to share it on this page. However, you should be cautious about running any kind of program (not just a shell script) at the request of a stranger on a public message board. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them.
Here's a summary of what you need to do: Copy a line of text from this web page into the window of another application. Wait for the script to run. It usually takes a couple of minutes. Then paste the results, which will have been copied automatically, back into a reply on this page. The sequence is: copy, paste, wait, paste again. Details follow.
4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply.
6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in your browser, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin; clear; Fb='%s\n\t(%s)\n'; Fm='\n%s:\n\n%s\n'; Fr='\nRAM details:\n%s\n'; Fs='\n%s: %s\n'; Fu='user %s%%, system %s%%'; PB="/usr/libexec/PlistBuddy -c Print"; A () { [[ a -eq 0 ]]; }; M () { find -L "$d" -type f | while read f; do file -b "$f" | egrep -q XML\|exec && echo $f; done; }; Pc () { o=`grep -v '^ *#' "$2"`; Pm "$1"; }; Pm () { [[ "$o" ]] && o=`sed '/^ *$/d; s/^ */ /' <<< "$o"` && printf "$Fm" "$1" "$o"; }; Pp () { o=`$PB "$2" | awk -F'= ' \/$3'/{print $2}'`; Pm "$1"; }; Ps () { o=`echo $o`; [[ ! "$o" =~ ^0?$ ]] && printf "$Fs" "$1" "$o"; }; R () { o=; [[ r -eq 0 ]]; }; SP () { system_profiler SP${1}DataType; }; id | grep -qw '80(admin)'; a=$?; A && sudo true; r=$?; t=`date +%s`; clear; { A || echo $'No admin access\n'; A && ! R && echo $'No root access\n'; SP Software | sed '8!d;s/^ *//'; o=`SP Hardware | awk '/Mem/{print $2}'`; o=$((o<4?o:0)); Ps "Total RAM (GB)"; o=`SP Memory | sed '1,5d; /[my].*:/d'`; [[ "$o" =~ s:\ [^O]|x([^08]||0[^2]8[^0]) ]] && printf "$Fr" "$o"; o=`SP Diagnostics | sed '5,6!d'`; [[ "$o" =~ Pass ]] || Pm "POST"; o=`SP USB | sed -n '1d; /:$/{s/ *:$//;x;s/\n//p;}; /V.*[(]/{s/^[^(]*/ /;H;}; /Apple/{s/.//g;h;}'`; Pm "USB"; o=`pmset -g therm | sed 's/^.*C/C/'`; [[ "$o" =~ No\ th|pms ]] && o=; Pm "Thermal conditions"; o=`pmset -g sysload | grep -v :`; [[ "$o" =~ =\ [^GO] ]] || o=; Pm "System load advisory"; o=`nvram boot-args | awk '{$1=""; print}'`; Ps "boot-args"; d=(/ ""); D=(System User); for i in 0 1; do o=`cd ${d[$i]}L*/L*/Dia* && ls | awk -F_ '!/ag$/{$NF=a[split($NF,a,".")]; print}' | tail`; Pm "${D[$i]} diagnostics"; done; o=`syslog -F bsd -k Sender kernel -k Message CReq 'GPU |hfs: Ru|I/O e|n Cause: -|NVDA\(|pagin|SATA W|ssert|timed? ?o' | tail -n25 | awk '/:/{$4=""; $5=""};1'`; Pm "Kernel messages"; o=`df -m / | awk 'NR==2 {print $4}'`; o=$((o<5120?o:0)); Ps "Free space (MiB)"; o=$(($(vm_stat | awk '/eo/{sub("\\.",""); print $2}')/256)); o=$((o>=1024?o:0)); Ps "Pageouts (MiB)"; s=( `sar -u 1 10 | sed '$!d'` ); [[ s[4] -lt 85 ]] && o=`printf "$Fu" ${s[1]} ${s[3]}` || o=; Ps "Total CPU usage" && { s=(`ps acrx -o comm,ruid,%cpu | sed '2!d'`); o=${s[2]}%; Ps "CPU usage by process \"$s\" with UID ${s[1]}"; }; s=(`top -R -l1 -n1 -o prt -stats command,uid,prt | sed '$!d'`); s[2]=${s[2]%[+-]}; o=$((s[2]>=25000?s[2]:0)); Ps "Mach ports used by process \"$s\" with UID ${s[1]}"; o=`kextstat -kl | grep -v com\\.apple | cut -c53- | cut -d\< -f1`; Pm "Loaded extrinsic kernel extensions"; R && o=`sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix\.cron)|org\.(amav|apac|calendarse|cups|dove|isc|ntp|post[fg]|x)/{print $3}'`; Pm "Extrinsic system jobs"; o=`launchctl list | sed 1d | awk '!/0x|com\.apple|org\.(x|openbsd)|\.[0-9]+$/{print $3}'`; Pm "Extrinsic agents"; o=`for d in {/,}L*/Lau*; do M; done | grep -v com\.apple\.CSConfig | while read f; do ID=$($PB\ :Label "$f") || ID="No job label"; printf "$Fb" "$f" "$ID"; done`; Pm "launchd items"; o=`for d in /{S*/,}L*/Star*; do M; done`; Pm "Startup items"; o=`find -L /S*/L*/E* {/,}L*/{A*d,Compon,Ex,In,Keyb,Mail/B,P*P,Qu*T,Scripti,Servi,Spo}* -type d -name Contents -prune | while read d; do ID=$($PB\ :CFBundleIdentifier "$d/Info.plist") || ID="No bundle ID"; [[ "$ID" =~ ^com\.apple\.[^x]|Accusys|ArcMSR|ATTO|HDPro|HighPoint|driver\.stex|hp-fax|\.hpio|JMicron|microsoft\.MDI|print|SoftRAID ]] || printf "$Fb" "${d%/Contents}" "$ID"; done`; Pm "Extrinsic loadable bundles"; o=`find -L /u*/{,*/}lib -type f | while read f; do file -b "$f" | grep -qw shared && ! codesign -v "$f" && echo $f; done`; Pm "Unsigned shared libraries"; o=`launchctl getenv DYLD_INSERT_LIBRARIES`; Pm "Inserted libraries"; o=`find -L {,/u*/lo*}/e*/periodic -type f -mtime -10d`; Pm "Modified periodic scripts"; o=`scutil --proxy | grep Prox`; Pm "Proxies"; o=`scutil --dns | awk '/r\[0\] /{if ($NF !~ /^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./) print $NF; exit}'`; Ps "DNS"; R && o=`sudo profiles -P | grep : | wc -l`; Ps "Profiles"; f=auto_master; [[ `md5 -q /etc/$f` =~ ^b166 ]] || Pc $f /etc/$f; for f in fstab sysctl.conf crontab launchd.conf; do Pc $f /etc/$f; done; Pc "hosts" <(grep -v 'host *$' /etc/hosts); Pc "User launchd" ~/.launchd*; R && Pc "Root crontab" <(sudo crontab -l); Pc "User crontab" <(crontab -l); R && o=`sudo defaults read com.apple.loginwindow LoginHook`; Pm "Login hook"; Pp "Global login items" /L*/P*/loginw* Path; Pp "User login items" L*/P*/*loginit* Name; Pp "Safari extensions" L*/Saf*/*/E*.plist Bundle | sed 's/\..*$//;s/-[1-9]$//'; o=`find ~ $TMPDIR.. $ -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $ | wc -l`; Ps "Restricted user files"; cd; o=`SP Fonts | egrep "Valid: N|Duplicate: Y" | wc -l`; Ps "Font problems"; o=`find L*/{Con,Pref}* -type f ! -size 0 -name *.plist | while read f; do plutil -s "$f" >&- || echo $f; done`; Pm "Bad plists"; d=(Desktop L*/Keyc*); n=(20 7); for i in 0 1; do o=`find "${d[$i]}" -type f -maxdepth 1 | wc -l`; o=$((o<=n[$i]?0:o)); Ps "${d[$i]##*/} file count"; done; o=$((`date +%s`-t)); Ps "Elapsed time (s)"; } 2>/dev/null | pbcopy; exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
7. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign ($) or a percent sign (%). If you get the percent sign, enter
exec sh
in the window and press return. You should then get a new line ending in a dollar sign.
Click anywhere in the Terminal window and paste (command-V). The text you pasted should vanish immediately. If it doesn't, press the return key.
If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know your password, or if you prefer not to enter it, just press return three times at the password prompt.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that takes administrator privileges.
The test may take up to a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line "[Process completed]" to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report your results. No harm will be done.
8. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
When you post the results, you might see the message, "You have included content in your post that is not permitted." It means that the forum software has misidentified something in the post as a violation of the rules. If it happens, please post the test results on Pastebin, then post a link here to the page you created.
Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Terms of Use of Apple Support Communities ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

Mac Pro never sleeps after upgrading to Mavericks

Hi Folks
Just realised that after upgrading to Mavericks from Mountain Lion, my Mac Pro never goes into sleep mode after the time set for it in System Preferences > Energy Saver.
This never happened with Mountain Lion.
Any body here having the same issue?
FYI - This is a 2012 Mac Pro having duo 6-cores, 64 GB RAM, 1 x SSD and 3 x HDD.
Thanks you for your comments.
B

Test after each of the following steps that you haven’t already tried:
Step 1
Take all the steps suggested in this support article. That's the starting point for any further effort to solve the problem. Skipping any of those steps may mean that the problem won't be solved. Note that, as stated in the article, the computerwill not sleep if Internet Sharing is enabled.
Step 2
From the menu bar, select
 ▹ System Preferences ▹ Accessibility ▹ Speakable Items: Off
Step 3
Select
 ▹ System Preferences ▹ Bluetooth ▹ Advanced...
and uncheck both boxes marked
Open Bluetooth Setup Assistant at startup if...
Step 4
Reset the SMC.
Step 5
Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled on some models, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Post for further instructions.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Safe mode is much slower to boot and run than normal. Don’t launch any applications at first. If sleep still doesn’t work properly, back up all data and reinstall the OS. After that, if you still have the issue, make a “Genius” appointment at an Apple Store to have the machine tested.
If sleep now works as expected, go on to the next step.
Step 6
Still in safe mode, launch the usual set of applications that are running when you have the problem, including your login items, one at a time, testing after each one. Some applications may not work; skip them. You might be able to identify the cause of the problem this way.
Step 7
If sleep is still working after you’ve launched all the usual applications, reboot as usual (not in safe mode) and test again. If sleep still works, you’re done, at least for the moment.
If you still have the sleep issue after booting out of safe mode, post again.

Upgrading Early 2009 Mac Pro to Yosemite

I need an upgrading for dummies tutorial I want to upgrade some applications that I use and can not do that with Mountain Lion which is currently on my Early 2009 Mac Pro. (Processor 2.66 GHz Quad-Core Intel Xeon - Memory 12 GB - Graphics NVIDIA GeForce GT 120 512 MB - OSX 10.8.5). My monitor is a NEC MultiSync P221W and I use Spectraview II to calibrate. I also have an older Dell monitor attached that I only use for palettes, etc.
I have discovered I can not upgrade to Mavericks and will need to go to Yosemite. I am nervous about the process and undecided what is the best way to tackle this. I assume I will first need to do a full backup and do have a bootable drive that I can use. Can I then just install Yosemite or is it best to do a clean install? I have heard so many negative things about installing Yosemite that I am really uncertain of the best way to tackle this. I am particularly concerned about the reports of system slow down.I have an even older MacBook Pro that is also running Mountain Lion but I have no plans to attempt an upgrade on it. It has had problems since it was fairly new and right now I use an external keyboard and a mouse because using the track pad or keyboard on the laptop cause it to lock up. (Long story and multiple rebuilds during and after Apple Care). So at this point the only machine I am concerned about is the desktop. I use it mainly for Photoshop and Lightroom and Quicken. If someone can give me some advice I would be most appreciative. I am an older gal with casual computer knowledge, living out in the sticks and really have no one available for help. Thanks in advance

Depending on how hard you push your system, size of files you work with.
You may want to look into 5,1 firmware; a W3690 or X5690 3.4GHz 6-core even to help more.
2009 Mac Pro 12-Core CPU Upgrade (Dual 3GHz Xeon X5675)
2009 8-Core Upgrade... The De-Lidded Route - MacRumors Forums
More memory, 24-32GB
OWC http://www.macsales.com is probably best place for DDR3 ECC
Macintosh Performance Guide Articles & Reviews
A faster better boot drive, and for plugins and cache. SATA II or III or PCIe-SSD blade
Samsung 850 EVO 250GB SSD your cheapest boot drive with a huge return and packs a punch in performance - booting, launching apps and large files, and saving.
A fast dedicated SSD device for Lightroom as well as something for working in Photoshop for scratch, unless you go with 500-1TB device.
SATA Express meets the '09 MacPro - Bootable NGFF PCIE SSD - Page 12 - MacRumors Forums
Samsung SM951 M.2 PCIe SSD Released StorageReview.com - Storage Reviews
SATA Express meets the '09 MacPro - Bootable NGFF PCIE SSD
SSD starts at just $80 + adapter for drive sled if talking Samsung 850 EVO (but I would get at least 250GB for a few dollars more as minimum).
A Samsung XP941 PCIe-SSD can't be beat with higher than SATA III speeds at 900MB/sec, $290 w/ adapter.
Samsung XP941 512GB M.2 80mm PCIe x4 SSD - MZHPU512HCGL
Samsung XP941 256GB PCIe 2.0 x4 M.2 SSD MZHPU256HCGL at Amazon
For graphic card, OWC can be over priced for even AMD 7950 Mac Edition or GTX 680.
MACVIDCARDS
More video memory helps of course, and a more modern card with either CUDA or better OpenCL
GeForce GTX 980 vs 9 other GPUs

TS3048 My early 2009 Mac Pro does not connect via bluetooth to my sound bar or bluetooth mini speakers. Both my wireless keyboard and mouse have no problems connecting. What do I need to do to connect to external bluetooth devices?

My early 2009 Mac Pro does not connect via bluetooth to my sound bar or bluetooth mini speakers. Both my wireless keyboard and mouse have no problems connecting. What do I need to do to connect to external bluetooth devices?

I would always have a wired keyboard and mouse on hand (need not be expensive ... any cheap wired devices will work). "Emergency recovery" procedures can activate features in random order, so the opportunity to select a recovery partition may pass before the wireless devices are recognized.
That will let you select the "turn on Bluetooth" icon.

2009 Mac Pro upgrading graphics card to GTX 680 mac. What is the best version of AE and PP and OSX to have?

Hello,
I have a 2009 Mac Pro 4.1
Mac OSX version 10.6.8
Processor - 2 x 2.26 GHz Quad-Core Intel Xeon
Memory - 24GB
Graphics Card - ATI Radeon HD 4870
I use After Effects and Premiere Pro daily for my work. I am not too technically minded. I want to update and improve my machine as much as possible and am thinking of buying an SSD drive to replace my current start up disk. I also am thinking about getting the GTX 680 mac version graphics card. I have read many online discussions regarding OpenCL and CUDA, many discussions with mixed feelings about the improvements the 680 gives an older Mac Pro - some people say it is amazing others say the improvements seem minimal or worse.
What I want to know is if I purchase the SSD and 680 graphics card what is the optimal OSX - 10.8 or 10.9? and what is the optimal versions of AE and PP to have - CS6 or CC? Also what settings and what additional drivers would I need to consider?
I contacted an independent authorised mac reseller and he thought it was a bad idea to put a new graphics card and get the latest OSX in an old machine and tried to sell me a used 2010 Mac Pro, but I think it would be more cost effective to get the SSD and 680 instead, it's just I read the occasional horror story on a forum and I worry about making the wrong choice, I rely on my Mac Pro to make a living!
Thanks in advance

Thank you for the valuable information Eric, I think I will go with the 680 but I understand that it wont be fully utilised on my old Mac Pro.
Perhaps I will replace my startup/applications hard drive with a 480GB SSD. My other 3 bays are full with 3 x 2TB Hard drives that have media on them so I have no spare room for a dedicated SSD drive for AE cache. But could I put a 250GB SSD into one of the PCI-E slots using something like - SSD SuperSpeed Upgrade Kit for Apple Mac Pro 2008 2009 2010 2012 | eBay
Would this be my best solution? Is it a relatively simple installation, does anyone have any experience of a similar setup?
cc_merchant, thank you for the reply, I am aware you have to pay monthly payments for CC, that is no problem.

2009 Mac Pro upgrade to Yosemite failed

Hi,
Seven days in and my 2009 Mac Pro is still dead. Very frustrated. It had a 4x3TB AppleRAID array in RAID1+0 giving 6TB. I initially did an upgrade to Yosemite and it got stuck at the half-way point after the restart. Yes, I did patiently wait ... but gave up after 12 hours (left it overnight). I assume the upgrade was supposed to finish sooner than that?
Found one stripe in the RAID array was 'degraded' - replaced that disk (seems they had 11000 hours on them) but it was impossible (for me) to see how to get the new disk back into the RAID scheme under Disk Utility (booted up using an upgraded MacBook). Once all the disks were removed from the array, Disk Utility gave no option to create a new RAID scheme, so I downloaded SoftRAID - yay, my RAID array was back (seems Apple gave up on their software RAID in 2009?).
However, still no joy. Created a Yosemite install USB drive - seems to run but then fails at the end ... "couldn't bless installation disk: /Volumes/Image Volume".
Okay, so downloaded the Mavericks installer and created an install USB drive - same as Yosemite ... can't bless the installation disk.
What else can I try? The Yosemite upgrade seems to have well and truly screwed my poor Mac Pro. I'd already successfully upgraded two of our four Macs successfully to Yosemite (one upgrade and one clean install) so thought it was okay.
I might try booting off one of the Macs again, with the Mac Pro in target disk mode, and try to run the installer to install Mavericks or Yosemite onto the Mac Pro's RAID array as an external disk ...
Otherwise ... ?

Booted the Mac Pro from the MacBook Air running Yosemite in target disk mode. Ran the Yosemite installer on the MBA to install on the Mac Pro's SoftRAID array "Hollie" - when the installer tells me it's going to restart I see the final logs written at 04:50 below:
Nov 1 04:45:19 192-168-1-11.tpgi.com.au InstallAssistant[721]: @(#)PROGRAM:Install PROJECT:Install-920
Nov 1 04:45:19 192-168-1-11.tpgi.com.au InstallAssistant[721]: @(#)PROGRAM:IA PROJECT:InstallAssistant-532
Nov 1 04:45:19 192-168-1-11.tpgi.com.au InstallAssistant[721]: Hardware: MacPro4,1 @ 2.66 GHz (x 16), 24576 MB RAM
Nov 1 04:45:19 192-168-1-11.tpgi.com.au InstallAssistant[721]: Running OS Build: Mac OS X 10.10 (14A389)
Nov 1 04:45:19 192-168-1-11.tpgi.com.au InstallAssistant[721]: Env: PATH=/usr/bin:/bin:/usr/sbin:/sbin
Nov 1 04:45:19 192-168-1-11.tpgi.com.au InstallAssistant[721]: Env: USER=brett
Nov 1 04:45:19 192-168-1-11.tpgi.com.au InstallAssistant[721]: Env: PATH=/usr/bin:/bin:/usr/sbin:/sbin
Nov 1 04:45:19 192-168-1-11.tpgi.com.au InstallAssistant[721]: Env: LOGNAME=brett
Nov 1 04:45:19 192-168-1-11.tpgi.com.au InstallAssistant[721]: Env: SSH_AUTH_SOCK=/private/tmp/com.apple.launchd.AzaK6cdqED/Listeners
Nov 1 04:45:19 192-168-1-11.tpgi.com.au InstallAssistant[721]: Env: Apple_PubSub_Socket_Render=/private/tmp/com.apple.launchd.o7DsCKSkcX/Render
Nov 1 04:45:19 192-168-1-11.tpgi.com.au InstallAssistant[721]: Env: HOME=/Users/brett
Nov 1 04:45:19 192-168-1-11.tpgi.com.au InstallAssistant[721]: Env: SHELL=/bin/bash
Nov 1 04:45:19 192-168-1-11.tpgi.com.au InstallAssistant[721]: Env: __CF_USER_TEXT_ENCODING=0x1F5:0x0:0x0
Nov 1 04:45:19 192-168-1-11.tpgi.com.au InstallAssistant[721]: Env: TMPDIR=/var/folders/r9/vckptcb10fxgj44jppfcg04h0000gn/T/
Nov 1 04:45:19 192-168-1-11.tpgi.com.au InstallAssistant[721]: Env: XPC_SERVICE_NAME=com.apple.InstallAssistant.Yosemite.158788
Nov 1 04:45:19 192-168-1-11.tpgi.com.au InstallAssistant[721]: Env: SSH_AUTH_SOCK=/private/tmp/com.apple.launchd.AzaK6cdqED/Listeners
Nov 1 04:45:19 192-168-1-11.tpgi.com.au InstallAssistant[721]: Env: Apple_PubSub_Socket_Render=/private/tmp/com.apple.launchd.o7DsCKSkcX/Render
Nov 1 04:45:19 192-168-1-11.tpgi.com.au InstallAssistant[721]: Env: XPC_FLAGS=0x0
Nov 1 04:45:19 192-168-1-11.tpgi.com.au InstallAssistant[721]: Env: LOGNAME=brett
Nov 1 04:45:19 192-168-1-11.tpgi.com.au InstallAssistant[721]: Env: USER=brett
Nov 1 04:45:19 192-168-1-11.tpgi.com.au InstallAssistant[721]: Env: HOME=/Users/brett
Nov 1 04:45:19 192-168-1-11.tpgi.com.au InstallAssistant[721]: Env: SHELL=/bin/bash
Nov 1 04:45:19 192-168-1-11.tpgi.com.au InstallAssistant[721]: Env: TMPDIR=/var/folders/r9/vckptcb10fxgj44jppfcg04h0000gn/T/
Nov 1 04:45:20 192-168-1-11.tpgi.com.au InstallAssistant[721]: Using distribution archive from /Users/brett/Desktop/Install OS X Yosemite.app/Contents/SharedSupport/OSInstall.mpkg
Nov 1 04:45:21 192-168-1-11.tpgi.com.au InstallAssistant[721]: Configuring products from SharedSupport folder
Nov 1 04:45:21 192-168-1-11.tpgi.com.au InstallAssistant[721]: Install is double-dmg. Not adding chunklist to download list.
Nov 1 04:45:21 192-168-1-11.tpgi.com.au InstallAssistant[721]: Using product <OSInstallDVDProduct> based on media at /Users/brett/Desktop/Install OS X Yosemite.app/Contents/SharedSupport at distance 5
Nov 1 04:45:21 192-168-1-11.tpgi.com.au InstallAssistant[721]: Using product <OSInstallESDProduct> based on distribution at /Users/brett/Desktop/Install OS X Yosemite.app/Contents/SharedSupport/OSInstall.mpkg at distance 5
Nov 1 04:45:21 192-168-1-11.tpgi.com.au InstallAssistant[721]: Checking Software Update catalog URL https://swscan.apple.com/content/catalogs/others/index-10.10-10.9-mountainlion-l ion-snowleopard-leopard.merged-1.sucatalog
Nov 1 04:45:21 192-168-1-11.tpgi.com.au InstallAssistant[721]: No available package ref for compatibility update. Ignoring.
Nov 1 04:45:21 192-168-1-11.tpgi.com.au InstallAssistant[721]: No available package ref for compatibility update. Ignoring.
Nov 1 04:45:23 192-168-1-11.tpgi.com.au InstallAssistant[721]: Using product <OSSoftwareUpdateCatalogProduct> from product keys (null) at distance 25
Nov 1 04:45:30 192-168-1-11.tpgi.com.au InstallAssistant[721]: LSExceptions [0x6300000bee40] unloaded
Nov 1 04:49:16 192-168-1-11.tpgi.com.au InstallAssistant[721]: IATool launched
Nov 1 04:49:16 192-168-1-11.tpgi.com.au InstallAssistant[721]: Connected to IATool 26fa80
Nov 1 04:49:17 192-168-1-11.tpgi.com.au InstallAssistant[721]: Preventing machine sleep.
Nov 1 04:49:17 192-168-1-11.tpgi.com.au InstallAssistant[721]: Using product IA_PKSecureNetEnabledProduct <file:///Volumes/Hollie/OS%20X%20Install%20Data/> at distance 5
Nov 1 04:49:17 192-168-1-11.tpgi.com.au InstallAssistantTool[738]: Using existing boot files dir at /.IABootFiles
Nov 1 04:49:17 192-168-1-11.tpgi.com.au InstallAssistant[721]: Using mutable product path: /Volumes/Hollie/OS X Install Data
Nov 1 04:49:17 192-168-1-11.tpgi.com.au InstallAssistant[721]: Using boot files path: /.IABootFiles
Nov 1 04:49:17 192-168-1-11.tpgi.com.au InstallAssistant[721]: Retrieving 1 packages (0.000 GB)
Nov 1 04:49:19 192-168-1-11.tpgi.com.au InstallAssistant[721]: Retrieved package com.apple.pkg.CompatibilityUpdate (http://swcdn.apple.com/content/downloads/14/57/031-11010/vhdn34frx9suyfcrslj0xyx n3t0dafhkn8/OSX_10_10_IncompatibleAppList.pkg)
Nov 1 04:49:19 192-168-1-11.tpgi.com.au InstallAssistant[721]: Verifying InstallMacOSX.pkg/InstallESD.dmg
Nov 1 04:49:33 192-168-1-11.tpgi.com.au InstallAssistant[721]: Finished operation queue
Nov 1 04:50:10 192-168-1-11.tpgi.com.au InstallAssistantTool[738]: Failed to set prev-lang:kbd
Nov 1 04:50:10 192-168-1-11.tpgi.com.au InstallAssistantTool[738]: hdiejectd already disabled.
Nov 1 04:50:12 192-168-1-11.tpgi.com.au InstallAssistantTool[738]: Failed to prep /Volumes/OS X Install ESD for brtool
Nov 1 04:50:12 192-168-1-11.tpgi.com.au InstallAssistantTool[738]: Failed to prep /Volumes/OS X Base System for brtool
Nov 1 04:50:13 192-168-1-11.tpgi.com.au InstallAssistant[721]: Failed to write mutable product url to NVRAM

2009 Mac Pro will not boot up under Windows

I have an Early 2009 Mac Pro system (Mac Pro 4,1) and I've had this system for 3 years already and have been working under OS X with this system ever since I purchased it.
However, when I tried to boot off my Windows disk, something very interesting happens. The Mac Pro WILL NOT boot up off the Windows disk or a known working Windows partition if two monitors are connected. Upon holding down the option key and selecting the Windows partition, I will get a black screen on one monitor (the one connected via Mini Displayport) and the other screen receives no signal and will enter standby and the system is halted. It does not respond to keystrokes, there is no hard drive activity, no measured power increase on the UPS, no apparent network activity, nothing. The only way to exit this scenario (from what I can tell) is to power off the machine, disconnect the display on DVI, power on the machine again, select the Windows partition wait for the system to reach the login window and reconnect the DVI monitor (at which time Windows recognizes it immediately and the system works fine again).
My question to the community is, does anybody know why this is happening and is there a known fix for this? Quite frankly, having to disconnect a monitor just to restart is very tedious and frustrating.
I have two Samsung P2350 monitors attached to an ATI Radeon HD 4870 (512MB, from Apple). One is monitor is connected via directly DVI and the other is using a Mini Displayport to DVI adapter. Both monitors work fine under OS X with no issue. At first, I thought that this may be a driver issue on the Windows side and after installing all the latest updates and drivers the issue is still apparent. From what I can tell, this doesn't seem like a software issue but rather a firmware or EFI issue as this happens before Windows even loads.
If anyone knows of a fix or what to do in this situation, or if you are also having this issue, I would love to hear your input!
Thank you!
For the record, I am running all the latest software builds on the OS X side (10.7.4, not that it would really matter at this point). I have also disconnected all unnecessary equipment in a trial and error scenario but the results are still the same.
The system passes all ASD testing.
The full specification of the computer and all connected equipment are as follows:
2009 Mac Pro (4,1) 8-Core
2x Intel Xeon Nehalem 2.66GHz Quad-Core CPUs
16GB DDR3 ECC 1066MHz RAM (Apple Branded)
Two OWC 120GB SSDs (One for OS X, the other for Windows 7 x64) - These are in place of my optical drives.
4x 2TB WD Black Hard drives for storage.
Two Samsung P2350 Monitors connected via DVI. (One using a Mini Displayport to DVI adapter).

In Windows I am using the latest (12.4) Catalyst Software Suite, 64 bit of course, downloaded directly from AMD's site after installing the drivers from Boot Camp.
As for installing Windows I used an original (not burned) installation media (Disk is in a pristine condition). And yes, Windows is fine, the problem just seems to be getting the system to boot up Windows with that second monitor. However if the "problem monitor" is disconnected the system boots fine 100% of the time and connecting it later after booting the system will still operate properly.
For the sake of arguement I swapped monitor cables and connected the "second" monitor to the mini displayport adapter to verify that it wasn't a cabling issue and I'm still yielding the same issues.
As for GPU testing, I've played games (Crysis, Grand Theft Auto IV, Battlefield 3, etc.) and I've had no issues with the card or stability.
You would think that Apple would try to find a fix for this, especially considering the caliber of this machine.

2009 Mac Pro will not sleep from set prefs

Hi all:
I've got a 1 YO Quad, 2.93 Nehelam that wont sleep on set schedule. It has been doing this sense last week. I get the P-RAM, unplugged everything (even power), re-plugged everything, repaired my drive with disc utility, erased start up items, everything.
It WILL sleep on Q but not on a schedule in energy saver prefs. The only thing thats different lately is that Installed CS5 Master suite and Apple's latest audio update (which fixed my audio by the way...)
Any idea's.
Thanks---Seattle

Is this question in the correct discussion? I thought this was the discussion for Mac Pro (previous to 2009). This could be a problem that appeared in the 2009 Mac Pro line ... or it could be related to the OS you are running.

Upgrade 2009 Mac Pro Hard Disk to a larger Hard Disk

Hi there, I am looking to upgrade my 2009 Mac Pro 1TB HDD to a 3TB HDD. I have a successfull Time Machine Backup, If I swap the HDDS, boot into OS Snow Leopard, format the new 3TB then restore from a TM backup, will it account for the new extra space? E.g, will I see a full 3TB (or there abouts) as usuable or will I see a kind of 1TB Partition with the same free space I had before, requiring the use of something like Disk Utility to Extend it? Any help would be appreciated! Many Thanks!
Ash

Still on Snow Leopard so yes.
My advise: use two drives: leaving your current as is.
One for system, second for data.
Also invest in Carbon Copy Cloner and you can also make a bootable copy, and selectively copy system and user or just system etc. and have it for doing quick smart backups and use for data volumes as well.
Many 3TB drives are slower than 7.2K desktop or enterprise and "green" which can be useful for backups.
3TB might be better for a new TimeMachine backup drive.
Yes DU will present full 3TB (you aren't doing a sector copy)
I aim to use 50% of a drive.
If you can, then invest into a small fast SSD like Samsung 840: $89 120GB is fine for most everyone, or 250GB. Then use some WD Black 2TB or larger for media.
you could leave the 1TB drive for system, remove all the media files taking up space, too and put those on the 3TB. I prefer to leave as is and have a safety net. At least for a month. Then turn the 1TB into a backup clone or something especially if you go ahead and get an SSD, which will run faster and perform better all around.
All depends on what you use your mac for.

Looking to upgrade graphics card on early 2009 Mac Pro

I'm a Final Cut Pro, Motion user looking to upgrade from the standard NVIDIA GeForce GT 120 on my early 2009 2 x 2.26 GHz Quad-Core Intel Xeon Mac Pro.
Between the ATI Radeon 5770 and 5870 which card is preferable for video work? Is the 5870 worth the extra money for what I do? Are both of these cards compatible with my machine?
Thanks.

In my usage experience, the current generation of Final cut studio doesn't benefit much from the jump from a 5770 to a 5870. Barefeats.com benchmarks back this up more or less.
I think in the long run, with GPGPU and push towards openCL, the 5870 is worth the extra $200 if buying a new mac pro -
if you are upgrading an old mac pro, you'd have to decide.
The 5770 will be so much faster than the GT120 running Motion, I know you would be content with that.

Why is my Mac book pro not letting me on my home page

Why is my Mac book pro not letting me on my home page

Keep it charging for a while.
If you can, do not use the computer for a while.
Let it charge.
Best.

Boot Camp, Vista Ultimate x64 SP1, 2009 Mac Pro Quad 2.93, ATI 4870 HD

Hello All,
I’ve run into a problem installing Boot Camp with Vista Ultimate x64 SP1 on my early 2009 Mac Pro Quad 2.93 with Apple’s ATI Radeon 4870 HD (the one with one DVI and one mini-display). I followed the instructions from the Boot Camp Installation and Setup Guide, and everything was going great until I hit page 12 of the Guide (Step 3). The Boot Camp drivers installed without error, and prompted me to reboot. Upon rebooting onto the newly installed Vista x64 partition, the screen went black after the chkdsk screen appeared. I can boot into Vista safe mode, but booting into Vista normally results in the black screen. On a hunch, while in safe mode, I uninstalled the ATI video drivers installed by Boot Camp. I was then able to boot Vista normally, but only with the standard VGA adapter. Then I tried installing the latest 9.4 ATI drivers from the chipset vendor, AMD, http://game.amd.com/us-en/drivers_catalyst.aspx. Booting normally after the ATI chipset drivers were installed left me with a mostly black screen, and a few swizzles of horizontal color, but not enough to make out any sort of image. Once again, I was able to boot normally by first booting into safe mode and then uninstalling the ATI driver, leaving me with the standard VGA driver.
The displays I have tried so far are 1) Apple Cinema HD 23”, and 2) Apple Cinema 20”. Also, I have tried all 6 permutations with the ports on the Apple version of the ATI Radeon 4870 HD with both displays (using the mini-display to DVI adapter), 2 permutations with both displays, and 4 permutations with single displays. All permutations result in the same black screen after installing Boot Camp drivers.
Am I missing something? It seems to me that there is a display driver that needs to come from Apple that will work with the Apple version of the ATI Radeon 4870 HD in Vista Ultimate x64 SP1 attached to an Apple display. I’ve installed Vista Ultimate x64 SP1 and many other operating systems in the past 27 years of working with computers, and typically with video cards I’ve had to get the drivers from the vendor that shipped the card, not the chipset vendor. Sure, occasionally the opposite is true, and I don’t mind spending a few days to figure out what works best for me as long as I believe I am making progress.
Has anyone else run into this problem with his or her early 2009 Mac Pro Quad 2.93 with Apple’s ATI Radeon 4870 HD? I’m posting this in the Boot Camp forum as I think this problem is rooted in the Boot Camp drivers, specifically for the Apple ATI Radeon 4870 HD. Please let me know if I should post elsewhere.

You are the second person I think I've seen with trouble using Mac Pro and ATI drivers (other was on Mac Pro forum).
When updating graphics, there are extra steps that insure you get the best working drivers.
I've always found Apple to be behind the curve on Windows support. Drivers that come with a card from the vendor ususally means ATI or Nvidia, and even then, you go to the web and download and install the latest tested / beta / qualified drivers. Some people try a variety of driver versions to find the one that works best.
Apple has not been updating Boot Camp drivers for Late 2008 and on Macs. Boot Camp 2.1 is now over a year old. What is on your OEM Leopard DVD is the only drivers I would use - if at all! try without is what some do, and then see if you can selectively install. Under Windows 7, I don't need or install, and now with the RC/7077 version of 7, Microsoft 'blocks' installing Apple Boot Camp drivers as known to cause problems.
If it ain't broke, don't fix it. Unistall the various Apple services, drivers, startup items that you can live without or until you narrow it down. iTunes 8.1+ in Windows can break and prevent ability to even use optical drives and devices for instance.
Some tips for upgrading drivers, one from eVGA forum but should translate.
http://www.evga.com/forums/tm.asp?m=396474
http://game.amd.com/us-en/drivers_catalyst.aspx
http://downloads.guru3d.com/download.php?det=1655

2009 Mac Pro not letting me upgrade to Mavericks nor 10.8

Similar Messages

Maybe you are looking for