2009 Mini freezes sometimes when left idle.

Does anyone else get this problem?
This is the second Mac mini as the first one had the same problem!
Only does this two or three times a day. The mouse icon will still move but nothing reacts to it. I have to re-boot to get it going again.
It is connected to a standard Mac wired keyboard and Mac wired mouse.
Connected to the internet via Ethernet cable to a cable modem NTL box.
I haven't yet loaded any extra software, it only has what it came with as standard.
Hope someone can help.

Same problem here. It freezes from time to time for 5 seconds or so, then everything is ok again. Even when playing music in iTunes, it becomes silent and then the music starts again. I changed the ram (and the hd as well), do you think this could be the cause?
Bruno
Message was edited by: aphextw

Similar Messages

  • Repeated Freezing When Left Idle.

    Since updating my PowerMac G5 to Leopard back when it came out, I've had a serious problem where everything will freeze up when left idle. My machine is configured to just shut the display off after 10 minutes of inactivity and I leave it on constantly. Each time the machine is left alone for several hours I move the mouse or hit a key to turn the display back on nothing happens. This was never a problem with 10.3 or 10.4 and started the day I installed 10.5. I can still ping the machine from other locations on my network but I cannot get any other type of network connectivity. The only way to bring it back to life is to hard power it down.
    I have been checking the logs to see if there is anything in there that can be an indication of what's going on and I constantly see errors relating to the USB subsystem. They look similar to this...
    USBF: xxx.xxx OHCI driver:
    OHCIRootHubResetResetChange bit not sticking.
    Retrying.
    I've unplugged all of my USB devices to see if anything would change but it does nothing. The one thing I can't modify are the USB ports on my display. I have an older 17" display with an ADC connection. The ports on that display have been acting up for years and I do not use them but I have no means to disconnect them as it all flows over the ADC connection.
    I'm running out of ideas on how to troubleshoot this.
    Thanks,
    Jeff.

    Did you get tis fixed? I have an imac G5 that is doing the same thing.

  • Safari spontaneously quits (auto-quits) when left idle (not in use) with no Safari-window open

    Safari 6.0.5 on Mac with OS X 10.8.4 (Mountain Lion) on Mac mini (October 2012) 1TB Fusion Dive (700 GB free) 16GB RAM (8GB free) spontaneously quits (auto-quits) when left idle  (not being used use) with no Safari-window is open.
    Console says nothing. No error message. Safari shows open on the Dock, and after a while it os not there. It has quitted itself!
    How to fix it?

    That sounds normal :
    Automatic Termination

  • Macbook pro logs out of network when left idle and then I need to turn off the router and all computers in the house to reset the system.

    I have a macbook pro running 10.6.8.  Since I got it over a year ago it will disconnect from the network when left idle and then not be able to reconnect.  All computers in the house have to be shut down and the router turned off in order to reconnect again.   My son just updated his macbook using my os disc and now his computer is doing the same thing.  What can we do?

    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    iOS: Wrong passcode results in red disabled screen                         
    If recovery mode does not work try DFU mode.                        
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings        
    For how to restore:
    iTunes: Restoring iOS software
    To restore from backup see:
    iOS: How to back up     
    If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
    You can redownload most iTunes purchases by:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store        
    Also
    If you have Find My iPhone enabled, you can use Remote Wipe to erase the contents of your device. If you have been using iCloud to back up, you may be able to restore the most recent backup to reset the passcode after the device has been erased.

  • My trackpad loses connection when left idle

    My trackpad loses connectivity when left idle - anyone know why this is happening & how I can rectify? Grateful for any advice.

    Nothing else I can think of to try.
    You might want to take everything in for testing.
    Barry

  • Mouse loses Bluetooth connection when left idle

    I am suddenly having an issue where the bluetooth mouse which works off the preinstalled Toshiba bluetooth stack,
    loses its connection when left idle for a little while.
    This was not happening before.
    What could cause this?
    I just changed the batteries in the mouse so that is not the issue.
    Any ideas?

    That doesn't matter. If you can get a newer version for your band then use it.
    If not, install the Toshiba one and see if it works. Afterwards install your old one again,
    but ensure during the uninstallation that you do not remove the old Bluetooth setup configurations (The uninstaller asks for it).
    In this case the newer driver remain on your system. Maybe it solves your problem.

  • Freezes sometimes when connecting to iTunes and an error

    Sometimes when I connect my Classic to the PC sometimes my iPod freezes and I have to do a hard restart on it, this happens like 50 percent of the time.
    It's still under warranty so should I just get it fixed or is it something I can do in the firmware?
    Also I'm fixing the album art issue and I read to uncheck sync and then recheck sync the Display album artwork on my ipod, but then it doesn't go too far until I hit an error. (-50) what does that mean?
    Message was edited by: Panji Brotoisworo

    +Also I'm fixing the album art issue and I read to uncheck sync and then recheck sync the Display album artwork on my ipod, but then it doesn't go too far until I hit an error. (-50) what does that mean?+
    In that particular context, a -50 can sometimes be indicating a corrupt piece of album artwork.
    Does the 50 always get thrown on the same song? If so, does deleting the artwork from that track allow the display artwork to sync through properly?

  • Premiere CS 5.5 freezes sometimes when I press File Save  Why?

    When I am working in Premiere Pro CS 5.5, sometimes when I press save, the save box comes up and then it freezes. I have to fotce quit Premiere Pro and re-open it again.
    Why does this happen?
    Most of the time it works fine and is does not freeze.
    It's just frustrating when it does.
    How can I fix this little problem?
    Thanks in advance

    OK Here is all the info.
    I am working in Premiere Pro Cs 5.5
    I am working with a Power Mac Intel Xeon
    OS x - Mountain Lion
    10 GB RAM
    It only freezes sometimes. Most of the time it saves fine.
    What do you mean by "System Instability?"
    Thanks in advance

  • Macbook Pro 15" i7 2.66Ghz restarts when left idle

    I think there is a problem when I have the Energy Saver option for Automatic Graphics Switching enabled and my machine is left idle, upon leaving for a meeting several times yesterday I came back to have my machine restarted at the login screen. This is a 3 day old fully updated machine running Snow Leopard 10.6.3. Anyone else experiencing this issue. After switching this off it has not restarted for over 18 hours now.

    I've figured out the problem, Under Security there is an idle logout setting that somehow got switched on when I upgraded to Snow Leopard. My old machine did not have this setting on and thus it was timing out due to inactivity and looked like a restart but was actually a logout. If Phone support had gone through this setting the logic board would not have needed to be replaced. At least It's resolved.

  • Why does biobench freeze sometimes when starting to accuire data?

    Sometimes when I try to start logging data it will not display any data and the time axis will not advance. If I hit the "Stop" button, it will stop after a short delay. The only way to get it to work again is to reboot the computer. Any suggestions?

    Sometimes when I try to start logging data it will not display any data and the time axis will not advance. If I hit the "Stop" button, it will stop after a short delay. The only way to get it to work again is to reboot the computer. Any suggestions?

  • Keyboard and trackpad freeze when left idle after installing hard drive

    Installed a Samsung HM640jj hard drive in my Macbook Pro. Since then the keyboard and trackpad freeze if not in use. As long as I keep scrolling around on the pad everything works fine but as soon as I stop they both freeze. On startup the freezes only last a few seconds but the longer my mac is on the longer the freezes last. I've tried a lot of tricks from other posts but no luck. Not sure if its a glitch with the drive or if I should wipe it and reinstall from OS disk to see if that works. Any ideas? Thanks

    Any chance that something was damaged or loosened while you were replacing the drive?
    What other tricks have you tried? Did you reset the PRAM and/or SMC?

  • Droid X freezes sometimes when I go to look @ pics I have taken

    I received my droid on the 16th and for the past week or so when I go to look at a picture I just took or in my gallery the screen turns black. I have fixed it by resetting the phone but it is a pain and definitely not good when friends see it happen. At least not for the phones appeal. Please let me know if you have experienced this. My system is up to date so I already know that is not the issue.

    This really isn't so much as a problem but a resource design, since the device saves photos on the SD Card when the photo album has to scan folders for image changes that sometime can take a minute to render the images, especially  if there are a large number of images to scan, some application create a cache file to speed this option up but I am unsure if the default album uses this configuration.  Please remember that the album can not access the cards images when unit is mounted to pc and this causes the application to rescan the card upon dismount to reflect any new files that may have been added during the storage card mounted process.
    My suggestion that should cut down on access time is to use the .nomedia fix to hide any images not needed to be shown in album, its preatty simple to do...
    1. Open up a new Notepad through start menu shortcut. Always open a notepad not just create a new Notepad by clicking desktop because it wont work that way.
    2. Leave blank and click File Save As.
    3. Name file".nomedia" (HAVE TO HAVE DOT AT BEGINNING)
    4. Change "Save as Type" as All Files (*.*)
    5. Save File
    6. Now just copy this file to any folders that you want to hide from album, when placed in top folder will hide all images that are also contained in sub folders of the folder.
    7. Reboot... All images you hide are now removed and album (but you can still access the files through any file browsers) and now album will usually load the other images faster that will minimize the lag or freezing during this process.
    Hope this helps.

  • Trackpad "Selects" when left Idle

    I've noticed that if I leave my mouse cursor idle, without touching the trackpad, for a short period of time, it will act as if I've pressed and held down the mouse button. For example, if I leave my cursor over text in a webpage, then leave the cursor idle (i.e. i don't touch the trackpad) for 30 seconds or so, when I return and move the cursor it will highlight all the text it moves over as if I've pressed and held the mouse button.
    In another case, I was using iTunes and left the cursor over the title bar of the program where you would normally click and hold if you wanted to move the program around on your screen. I left the cursor there for about 30 seconds and when i returned to move the cursor it acted as if I had selected and held the iTunes program, moving it wherever I moved the mouse cursor.
    What's going on and how can I fix that? Has anyone else reported a similar problem? Thanks for any help!!

    What you could try is going to System Preferences, then clicking on Keyboard & Mouse, then going to the Trackpad tab at the top and seeing if it says that dragging is enabled. If it is, uncheck it and see if that helps.

  • Firefox freezes sometimes when I try to open a web site in a new window.

    For the past few weeks I am having an intermittent problem with firefox freezing. It happens when I try to open a site in a new window. Most of the time I have to go to task manager to close it and re-start. And almost always when I re-start it freezes for a second time and then I have to open it a third time. Usually if I try to restore a session it will happen over and over again so I have to start a new session. I have windows 7 and the latest version of firefox.

    '''''"Is there some way to turn this off so I can open up the second tab using the same address from the drop down?"'''''
    You can install this Add-on: https://addons.mozilla.org/en-US/firefox/addon/switch-to-tab-no-more/
    '''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''
    Not related to your question, but...
    You need to update some plug-ins:
    *Plug-in check: https://www-trunk.stage.mozilla.com/en-US/plugincheck/
    *Adobe Shockwave for Director Netscape plug-in: [https://support.mozilla.com/en-US/kb/Using%20the%20Shockwave%20plugin%20with%20Firefox#w_installing-shockwave Installing ('''''or Updating''''') the Shockwave plugin with Firefox]
    *Next Generation Java Plug-in for Mozilla browsers: [https://support.mozilla.com/en-US/kb/Using%20the%20Java%20plugin%20with%20Firefox#w_installing-or-updating-java Installing or Updating Java in Firefox]

  • MacBook (Early 2009) - Screen freezes (hang) when playing music or video

    Hi,
    I have an strange problem with MacBook (Early 2009). Whenever I play music using ITunes or DVD with IDVD or even watch a video on youtube, my macbook will hang suddenly and a strange sound will come out.
    To recover from this problem, i have to power off the system and power on the system again.
    Initially, I thought it is related to iTunes but the same problem occurs even i use other alternatives (e.g. songbird) for playing of songs.
    Please kindly advice me.
    Thank you.
    Michael.

    I have a similar problem since the last update 10,5,7.
    Always when I connect my iPod80GB the computer hangs, the problem only exist when running Mac OS X. It won't happen while running windows.
    The same problem when I connect an external hard drive the computer hangs aswell (Mac OS X) (not in windows).
    My personal feeling is that there are serious bugs in the last program update.

Maybe you are looking for

  • Error 1330 (Invalid digital signature in data1.cab) installing 1.6.0_11

    I cannot install jre6 update 10 or 11. Both attempts (from full download) result in: <img src="file:///C:/Users/Graham/AppData/Local/Temp/moz-screenshot.jpg" alt="" /> If I try the online install (update 11), the download runs to completion, then the

  • System is showing some Incorrect Header text in Display Bank account Pharse

    Dear all, I am having an issue with the client. The client says some incorrect text ( Header text ) is deternined for one billing delivery invoice number in VF03, the text type for this Invoice number is bank account phrase. But the text maintained i

  • How to start service as specific user!!!

    Hi all, I need to create an apache service script. All is fine with this and I've imported etc but its running as root and I want to run as apache. Is there an easy way of doing this other than an su -c??? Cheers

  • Too many photos slowing my mac- what do i do?

    i have backed to an external harddrive but when i access this it just lists 1000's of photos in jpeg format- not very user friendly. Also before i cloud came along i already had 100's of pictures in my iphoto library. What do I do? I need to delete s

  • Index management in TREX

    Hello all, We have a webshop running and are using TREX for the product catalog. The catalog is replicated from ECC using program ISA_CATALOG_REPLICATION. Something seems to have gone wrong since there are a lot of indexes on TREX where there should