2010 SP3 Management Tools on 2012

Hi!
We need to manage our Exchange 2010 SP3 from a windows 2012 member server. What are the requirements on windows 2012 to install the management tools. Do we have to install IIS first? If yes then what options of IIS?
Thanks.

Hi,
Before installation of Exchange 2010 management tool, we need to Install .NET Framework 3.5 and Windows PowerShell v2 first. After these preparations, we need to
Use the Add-WindowsFeature cmdlet to install the necessary operating system components for the Exchange 2010 SP3 roles.
On the Start screen, right-click Windows PowerShell and then click
Run as administrator. Then, run the following commands.
Import-Module ServerManager
Add-WindowsFeature NET-Framework-Features,NET-HTTP-Activation,RPC-over-HTTP-proxy,RSAT-Clustering,Web-Mgmt-Console,WAS-Process-Model,Web-Asp-Net,Web-Basic-Auth,Web-Client-Auth,Web-Digest-Auth,Web-Dir-Browsing,Web-Dyn-Compression,Web-Http-Errors,Web-Http-Logging,Web-Http-Redirect,Web-Http-Tracing,Web-ISAPI-Ext,Web-ISAPI-Filter,Web-Lgcy-Mgmt-Console,Web-Metabase,Web-Net-Ext,Web-Request-Monitor,Web-Server,Web-Static-Content,Web-Windows-Auth,Web-WMI
–Restart
Then run the Exchange 2010 setup wizard to install Exchange management tool.
Best Regards.

Similar Messages

  • Exchange Server 2010 with SP3 Management Tools

    Recently I have installed brand new Exchange Server 2010 with SP1 in my test domain. Afterwards I upgraded it to Exchange Server 2010 with SP3. On client machine (Windows 7 Pro with SP1 x64) I run setup.exe for Exchange Server 2010 with SP1 installation
    DVD to install Management Tools. All checks passed successfully but after installation was completed there was an error in EMC:
    The World Wide Web Publishing Service (W3SVC) isn't running on any Exchange servers in the site.  If you want to connect to Remote Powershell, this service must be running.  Make sure that the W3SVC is running on at least one Exchange server.
    Of course service is running. I read this has something to do with different versions of Exchange Server itself and Management Tools. Since there is no installation of Exchange Server 2010 with SP3 how to solve this? I assume if I have installation of Exchange
    Server 2010 with slipstreamed Service Pack 3, management tools installed from this installation would work.
    Also does this mean that, if I have working tools for Exchange Server and SP for it is installed later, tools will stop functioning?

    I would install SP3 on all servers and workstation as SP1 and SP2 aren't supported anymore and see how it is behaving...
    http://blogs.technet.com/b/rmilne/archive/2013/01/04/end-of-exchange-2010-sp1-support.aspx

  • [SOLVED] Can't add a node to the cluster with error (Exchange 2010 SP3 DAG Windows Server 2012)

    Hi there!
    I have a problem which makes me very angry already :)
    I have two servers Exchange 2010 SP3 with MB role started on Windows Server 2012. I decided to create a DAG.
    I have created the prestaged AD object for the cluster called msc-co-exc-01c, assigned necessary permissions and disabled it. Allowed through the Windows Firewall traffic between nodes and prepared the File Share Witness server.
    Then I have tried to add nodes. The first node has been added successfully, but the second node doesn't want to be added :). Now I can add only one node to the DAG. I tried to add different servers first, but only the first one was added.
    LOGS on the second nodes: 
    Application Log
    "Failed to initialize cluster with error 0x80004005." (MSExchangeIS)
    Failover Clustering Diagnostic Log
    "[VER] Could not read version data from database for node msc-co-exc-04v (id 1)."
    CMDLET Error:
    Summary: 1 item(s). 0 succeeded, 1 failed.
    Elapsed time: 00:06:21
    MSC-CO-EXC-02V
    Failed
    Error:
    A database availability group administrative operation failed. Error: The operation failed. CreateCluster errors may result from incorrectly configured static addresses. Error: An error occurred while attempting a cluster operation. Error: Cluster API '"AddClusterNode()
    (MaxPercentage=100) failed with 0x5b4. Error: This operation returned because the timeout period expired"' failed. [Server: msc-co-exc-04v.int.krls.ru]
    An Active Manager operation failed. Error An error occurred while attempting a cluster operation. Error: Cluster API '"AddClusterNode() (MaxPercentage=100) failed with 0x5b4. Error: This operation returned because the timeout period expired"' failed..
    This operation returned because the timeout period expired
    Click here for help... http://technet.microsoft.com/en-US/library/ms.exch.err.default(EXCHG.141).aspx?v=14.3.174.1&t=exchgf1&e=ms.exch.err.ExC9C315
    Warning:
    Network name 'msc-co-exc-01c' is not online. Please check that the IP address configuration for the database availability group is correct.
    Warning:
    The operation wasn't successful because an error was encountered. You may find more details in log file "C:\ExchangeSetupLogs\DagTasks\dagtask_2014-11-17_13-54-56.543_add-databaseavailabiltygroupserver.log".
    Exchange Management Shell command attempted:
    Add-DatabaseAvailabilityGroupServer -MailboxServer 'MSC-CO-EXC-02V' -Identity 'msc-co-exc-01c'
    Elapsed Time: 00:06:21
    UPD:
    when Exchange servers ran on the same Hyper-V node, the DAG is working well, but if I move one of VM to another node, It stops working.
    I have installed Wireshark and captured trafic of cluster interface. When DAG members on the same HV-node, there is inbound and outbound traffic on the cluster interface, but if I move one of DAG member to another node, in Wireshark I see only outbound traffic
    on both nodes.
    It's confused me, because there is normal connectivity between these DAG members through the main interface.
    Please, help me if you can.

    Hi, Jared! Thank you for the reply.
    Of course I did it already :) I have new info:
    when Exchange servers ran on the same Hyper-V node, the DAG is working well, but if I move one of VM to another node, It stops working.
    I have installed Wireshark and captured trafic of cluster interface. When DAG members on the same HV-node, there is inbound and outbound traffic on the cluster interface, but if I move one of DAG member to another node, in Wireshark I see only outbound traffic
    on both nodes.
    It's confused me, because there is normal connectivity between these DAG members through the main interface.

  • Cannot upgrade Exchange 2010 SP1 Management Tools to SP2 on Win 8.1 workstation

    I have a Win 8.1 workstation that I am trying to update the Exchange Management tools on from 2010 SP1 to SP2. I get an error that says:
           Error:
           The following error was generated when "$error.Clear(); &RoleBinPath\ServiceControl.ps1 EnableServices Critical" was run: "AuthorizationManager check failed.".
    The WMI service is being disabled and not starting back up after, causing the error. I have tried the following:
    -Confirmed that the ExecutionPolicy is set to undefined/unrestricted for the localmachine
    -Confirmed no GPO exists in our domain to restrict this
    Every single time I run the install the WMI service switches to disabled and the localmachine Execution Policy is switched to RemoteSigned.
    I have tried the Google search steps except for the Setup /M:Recoverserver since I really don't know what that would do to our Exchange environment. I have seen some posts that the Exchange 2010 MGMT tools are not supported on Win 8, which I find hard to
    believe. I get no unsupported error just this incredibly frustrating error.
    Any ideas?

    What you are doing is totally unsupported:
    http://technet.microsoft.com/en-us/library/ff728623(v=exchg.150).aspx
    By the way, Exchange 2010 sp1 and SP2 are no longer supported, the minimum supported is SP3.
    http://social.technet.microsoft.com/Forums/en-US/b3085dd9-6777-454e-af30-279dfccffb8b/exchange-2010-sp1-and-sp2-are-no-longer-supported?forum=exchange2010
    Please take a moment to Vote as Helpful and/or Mark as Answer where applicable. Thanks.

  • Exchange 2010 SP3 upgrade fails at stopping services for Management tools station

    Attempting to upgrade a Windows 7 SP1 64bit virtual machine from Exchange 2010 SP2 management tools to SP3 fails with the following error:
    Summary: 11 item(s). 1 succeeded, 1 failed.
    Elapsed time: 00:15:19
    Preparing Setup
    Completed
    Elapsed Time: 00:00:00
    Stopping Services
    Failed
    Error:
    The following error was generated when "$error.Clear();
              & $RoleBinPath\ServiceControl.ps1 -Operation:DisableServices -Roles:($RoleRoles.Replace('Role','').Split(',')) -SetupScriptsDirectory:$RoleBinPath;
              & $RoleBinPath\ServiceControl.ps1 Stop $RoleRoles.Replace('Role','').Split(',')
            " was run: "Service 'NetBT' failed to reach status 'Stopped' on this server.".
    Service 'NetBT' failed to reach status 'Stopped' on this server.
    Click here for help...
    http://technet.microsoft.com/en-US/library/ms.exch.err.default(EXCHG.141).aspx?v=14.3.123.3&e=ms.exch.err.Ex88D115&l=0&cl=cp
    Elapsed Time: 00:15:19
    Here is the powershell execute policy:
    PS C:\> Get-ExecutionPolicy -list
    Scope                                            
    ExecutionPolicy
    MachinePolicy                                               
    Unrestricted
    UserPolicy                                               
    Unrestricted
    Process                                                  
    Undefined
    CurrentUser                                               
    RemoteSigned
    LocalMachine                                               
    RemoteSigned

    Hi Bad Dos,
    Any updates?
    You can also try to uninstall sp2 Management Tool first, then install SP3 directly. 
    Frank Wang
    TechNet Community Support

  • Install Exchange 2010 Sp3 on Windows 2012 R2

    Dear All,
    From Microsoft Exchange support matrix, I can tell that Exchange 2010 Sp3 is not listed on supported page. However when I run the setup, the prerequisite setup check, dose not list any warnings or issues with the setup, all check are green. Is it possible
    that the support OS matrix has not been updated? Is Exchange 2010 Sp3 supported on Windows 2012 R2?
    http://blogs.technet.com/b/rmilne/archive/2013/09/17/exchange-support-for-windows-server-2012-r2.aspx
    Thank you

    The prerequisite check is checking that the required Windows components are installed.  Exchange 2010 is still not supported on Windows Server 2012 R2.

  • Exchange Management Tools? Hybrid Exchange 2010 SP3 - Exchange 2013 (Office 365 - Exchange Online)

    When running in Hybrid mode... is there any advantage to installing the Exchange 2013 server management tools on my machine versus the Exchange 2010 management tools? 
    Any advantages/disadvantages? 
    I still do have some on premises mailboxes that need to be migrated to the cloud (Exchange Online). 
    Thoughts? Suggestions? Experiences? 

    Hi Viva,
    We don't have Exchange Management Console in Exchagne 2013 in all the web interface we used in Exchange server 2013. In Exchange 2010 we are having Exchange management console. Hence we can able to access exchange 2010 and 2013 both on the same server.
    Exchange Queries

  • Virtualise Exchange Management Tools 2010 SP3

    Good Morning,
    I hope this is a simple one to answer as I'm struggling and I can't really figure out why.
    Previously I have been able to Sequence Microsoft Exchange Management Tool SP1 and SP2 in App-V 4.6 SP1 on Windows 7 x64 Enterprise edition. My VM is a basic build, and I've manually added the pre-reqs for the management tools prior to firing up the sequencer
    (This is the IIS and .NET 3.5.1 options).
    I'm finding that with the installer for Exchange Management Tools 2001 SP3, the Setup.exe fails, but only if the Sequencer is running (I get a setupUI.exe encountered an error type message).
    Has anyone else tried to capture this a s a virtual app? Is it no longer possible or has anyone else come across this and solved this?
    Any info is welcome. Please let me know if further detail is required - I've included what I think is relevant.
    Kind regards,
    Ed

    Hello,
    What happens if you use the previous version of the App-V sequencer?
    Nicke Källén | The Knack| Twitter:
    @Znackattack

  • Unable to add File Server Resource Manager Tools on Windows Server 2012 - Errors on restart and roll back install

    Unable to install Windows Server 2012 Feature -  [Tools] File Server Resource Manager Tools.
    Installs, however when I restart the server error messages appears saying feature unable to install, windows reverting changes.
    In the Setup event logs have the following information message "Update FSRM-Infrastructure of package FSRM-All failed to be turned on. Status: 0x800f0922"
    Does anyone have any idea's on why this Feature can not be installed ??
    Scott

    Hi Shaun
    Tried both of your suggestions, however neither strategy worked.
    Strategy 1
    Tried installing via powershell - "install-windowsfeature -name fs-resource-manager -includemanagementtools"   
    Feature un-installed itself during the restart.
    Attempted to use the command "DISM /online /remove-feature /featurename:FSRM-Infrastructure-Services".  However
    this did work because one the Service was'nt installed or two because there was no command option for "/remove-feature"
    PACKAGE SERVICING COMMANDS:
      /Add-Package            - Adds packages to the image.
      /Remove-Package         - Removes packages from the image.
      /Enable-Feature         - Enables a specific feature in the image.
      /Disable-Feature        - Disables a specific feature in the image.
      /Get-Packages           - Displays information about all packages in the image.
      /Get-PackageInfo        - Displays information about a specific package.
      /Get-Features           - Displays information about all features in a package.
      /Get-FeatureInfo        - Displays information about a specific feature.
      /Cleanup-Image          - Performs cleanup and recovery operations on the image.
    Strategy 2
    Tried installing via powershell, using the following command DISM
    /online /enable-feature /featurename:FSRM-Infrastructure-Services, however got the same result, the install backed out during the restart.
    All up back to where I started?

  • Exchange 2010 SP3 - Can DAG member be on OS 2012 R2 STD?

    Hi guys.
    We have Exchange 2010 SP3 on 2008 r2 enterprise.
    now we are thinking about having DAG. I know that recommendations is to have the same OS on 2nd Exchange server but still is it possible to make DAG between: Exchange 2010 SP3 on 2008 r2 enterprise and on other side Exchange 2010 SP3 on 2012 R2 STD?
    with best regards,
    bostjanc

    Hi guys.
    We have Exchange 2010 SP3 on 2008 r2 enterprise.
    now we are thinking about having DAG. I know that recommendations is to have the same OS on 2nd Exchange server but still is it possible to make DAG between: Exchange 2010 SP3 on 2008 r2 enterprise and on other side Exchange 2010 SP3 on 2012 R2 STD?
    with best regards,
    bostjanc
    No. It wont let you do that. 
    http://technet.microsoft.com/en-us/library/dd638104(v=exchg.141).aspx
    DAGs are available in both Exchange 2010 Standard Edition and Exchange 2010 Enterprise Edition. In addition, a DAG can contain a mix of servers running Exchange 2010 Standard Edition and Exchange 2010 Enterprise Edition.
    Each member of the DAG must also be running the same operating system. Exchange 2010 is supported on both the Windows Server 2008 and Windows Server 2008 R2 operating systems. All members of a DAG must run either Windows Server 2008 or Windows Server 2008
    R2. They can't contain a combination of both Windows Server 2008 and Windows Server 2008 R2.
    In addition to meeting the prerequisites for installing Exchange 2010, there are operating system requirements that must be met. DAGs use Windows Failover Clustering technology, and as a result, they require the Enterprise version of Windows.
    Twitter!: Please Note: My Posts are provided “AS IS” without warranty of any kind, either expressed or implied.

  • NPS Management tools missing after server 2012 r2 upgrade

    it appears that my nps management tools are gone! I've verified that Network Policy and Access Services is installed and running. but i'm not able to manage it.   I can not find the console anywhere, it's not in the admin tools and I cannot at
    it through mmc.  I just noticed this since ip upgrade to 2012 r2, since it is already configured can I just add the management tools?
    thanks

    Hi，
    Good to hear that and thanks for your feedback.
    Best regards,
    Susie
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

  • SCOM 2012 R2 & Exchange Server 2010 SP3 - Mailbox services not monitored

    Having done everything depicted in Exchange Server 2010 MP I still have trouble with some Exchange services - they are in not monitored state (five days passed):
    Mailbox All Database Services - Default-First-Site-Name
    Mailbox Database Service - Management - test.local
    Mailbox Database Service - PublicFolders - test.local
    Mailbox Database Service - Users - test.local
    Mailbox Many Database Service - Default-First-Site-Name
    OfflineAddressBook Service - Default-First-Site-Name
    Why is this happening? Since monitoring exchange mailbox databases is one of the most important tasks SCOM should be doing I assume something wrong is going on here. However there are no errors or alerts in SCOM console nor in OpsMgr
    log on Exchange server itself.

    Hi There,
    Did you install the Microsoft Exchange monitoring correletion service while importing the Exchange 2010 management pack ?
    Does your MS have RMS Emulator role ? As many alerts in the Exchange 2010 MP are targetted to Root management server class.
    Also did you configure Test mailboxex and stuff post Exchange 2010 Import ?
    Did you analyse the Ops manager Event logs in the MS and Agent ? Can you post the critical and Warnign events here.
    Also is Agent proxy enabled ?
    Also is the Action account of the Agents System or Domain account ?
    Also refer: http://blogs.catapultsystems.com/jcowan/archive/2013/03/26/opsmgr-2012-and-2007-exchange-server-2010-monitoring-management-pack-how-to-perform-the-optional-configurations-for-synthetic-transactions-and-kerberos-authentication.aspx
    Gautam.75801

  • Error when trying to install MS Exchange 2010 Management Tools Windows 7 x64 SP1

    When I try to install Exchange 2010 Management Tools on my Windows 7 Pro x64. I get the message ExSetupUI.exe has stopped working? Has anybody else gotten this message?  It doesn't even load into the install screen. It is stopping before then.

    Hi
    Have you installed the admin tools for windows 7 and all the prerequisites? Try running the setup from an elevated prompt or "as Administrator"
    for ref:
    http://social.technet.microsoft.com/Forums/en-US/63880f4e-6b6e-4ea9-b3b6-8a535657288f/installing-exchange-management-tools-on-a-win-7-x64-box-getting-error-on-readiness-checks?forum=exchange2010

  • Exchange 2013 management tools installation on windows 2012 standard edition gives error.

    Exchange 2013 management tools installation on windows 2012 standard edition gives following error.
    Does anyone observed this issue ?
    Error:
    The Exchange management tools are supported on servers running Windows Server 2012 and Windows Server 2008 R2 SP1 or later, and also on Windows 8 and Windows 7 client computers.
    For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.ValidOSVersionForAdminTools.aspx
    My Test lab is having
    Exchange 2013 installed (xyz.local) domain and working fine.
    Now i am installing Exchange Management tools on server which is member of (xyz.local) Domain  (base OS : Windows 2012 standard edition : Windows updated)
    Best Regards
    sameer Prabhune

    Hi Sprabhune,
    It should work.
    Did you install the tool by GUI or cmd?
    Please select "Automatically install Windows Server roles and features that are required to install Exchange Server" to have the Setup wizard install required Windows prerequisites.
    If possible, please try to install the tool on Windows 7/8 client to test.
    Exchange 2013 Prerequisites
    http://technet.microsoft.com/en-us/library/bb691354.aspx
    Frank Wang
    TechNet Community Support

  • Silent Install Exchange 2010 SP2 RU7 Management Tools On Windows 7?

    We already have Exchange 2010 SP2 RU7 running on a server. We would like to automate deploying the management tools to the Windows 7 workstations of admins that use the console.
    Would a batch file with these commands work when run on a Windows 7 SP1 workstation?
    dism /online /enable-feature /featurename:IIS-WebServerRole
    dism /online /enable-feature /featurename:IIS-WebServerManagementTools
    dism /online /enable-feature /featurename:IIS-IIS6ManagementCompatibility
    dism /online /enable-feature /featurename:IIS-Metabase
    dism /online /enable-feature /featurename:IIS-LegacySnapIn
    Setup /r:MT
    How can we deploy the management tools to the workstations with SP2 and RU7 already installed so we don't have to do a separate step of installing the service pack and rollup after doing the base install?

    Hi,
    First, please make sure the Windows 7 version is 64-bit version. When you create a batch file, you should specify the shared Exchange setup file, you can refer to the following thread.
    http://social.technet.microsoft.com/Forums/en-US/e3023a7f-dd70-44c5-94c8-528d8eb1a8a1/silent-install-of-exchange-2010-mangement-tools-sp2?forum=mdt
    After you have installed Exchange Management Tool on Windows 7, please always ensure you install any Exchange Service Pack which is the same with Exchange server on the PC running EMC.
    Best regards,
    Belinda
    Belinda Ma
    TechNet Community Support

Maybe you are looking for