2012 and userlib size impact

We are noticing that the startup time and stability of LabVIEW 2012 is tied to the size of the userlib - i.e. how many VI's exist there.  We have a large userlib directory that worked fine in 2011. We have gone through and mass compiled all the files with 2012f3 and all compiles.  If I remove all these files from userlib, LabVIEW 2012 starts up fast and is stable.  If I copy back it takes a long time for LabVIEW to start and stability becomes an issue (a lot of image.cpp or primsupport.cpp crashes - even when labview is not doing anything - just at opening screen).  We can always recover by temporarily removing our userlib files, starting labview and then copying back after it starts up.
Anyone experiencing something like this?
John

Hi John,
I was doing some reading on this issue, specifically the crashes you are finding. It sounds like image.cpp or primsupport.cpp crashes could be caused by mass compiling. The solution to that particular issue is to run a mass compile from the top level VI of your program, and note the files that generate the errors and try to mass compile those individually.
With the crashes, are there particular error numbers involved with it? It would be good to see what the error numbers are so I can look into this further.
Regards,
James W.
Applications Engineer
National Instruments

Similar Messages

  • Are there any differences between Server 2012 and Server 2012 R2 that might impact TFS or SQL server required for TFS?

    Hi,
    In the interest of just getting started and learning the basics of setting up TFS, I previously setup an IDE using a large workstation running Windows 8.  I set up the required servers for TFS using VM's through Hyper-V.  I am now transferring
    everything to a new and separate physical server.
    My question stems from a problem I had when I originally setup the TFS system the 1st time.  I couldn't get SQL server to work using the Server 2012 R2 download from the subscription center.  When I used Server 2012, it worked, so I proceeded that
    way just to get going.
    So now I'm setting things up anew on a new physical box, I want to ask up front, is there some difference in the R2 version that causes problems with either TFS or SQL server, or was there likely some oversight on my part when I did things the 1st time?
    As an addendum to my question, I always assumed R2 merely means the Server software has progressed to a refined state and is ready for wide distribution and easy setup.  I assumed that there are no differences between the Standard version and the R2
    version.  Is that understanding correct?
    Thanks.

    Hi Daniel,
    Thanks for your response.  That's a great link.  I don't recall seeing a page that is so clear and easy to read back when I was doing this the 1st time, but I probably just missed it.  That helps.
    I am/was using TFS2013 and VS2013.  As I recall, my problem was getting SQL Server to work, but I thought asking this question on this forum was wiser because I figured everyone using TFS would be well familiar with these issues.
    At any rate, it seems as though TFS2013 is fine with Server 2012 standard or R2.
    I was using SQL Server 2012, and it also seems as though it works on R2:
    https://msdn.microsoft.com/en-us/library/ms143506(v=sql.110).aspx
    Anyway, thanks for your support.  I'll be trying this again and we'll see.

  • I just updated my iTunes and I do not like the newer version.....can I go back to the earlier version??  This new version does not have the iTunes DJ nor does is show at the bottom as in the earlier version how many songs and the size of my library.

    I just updated my iTunes on 12-7-2012 and I do not like the newer version.....can I go back to the earlier version??  This new version does not have the iTunes DJ nor does is show at the bottom as in the earlier version how many songs and the size of my library.

    To do this in iMovie 11. use the SHARE menu. Share your project using the Share menu and choose Export Using QuickTime.
    In the Dialog box that comes up, choose Sound to AIFF, or one of the other sound options. This will create a file that you can drag into iTubes.

  • SCCM 2012 and 2012 sp1 client cache not cleaning itself

    I work on a University campus that deploys 100's of software titles to lab computers.  Since last summer, we have been using Config Man 2012 and upgraded to 2012 SP1 in early Jan.  Recently we started noticing 160GB hard drives filling up in locations
    that get most of our software.  When looking into it, the ccmcache folder has 50GB+ of data in it even though the cache size is set to 30GB.  I looked at the folders in the cache and many of them are from last summer when the apps were first
    downloaded and installed.  NONE of these apps are set to persist.  My understanding is that they should have been cleaned up automatically after 24 hours as space was needed.  Either way, shouldn't the cache folder be at or smaller than the
    cache size setting? 
    I have talked to others that have seen similar problems with 2012 of the cache folder growing beyond the max, but they don't have the software load that we do, so they are not filling their drives.  If I manually tell Confi Man client to delete the
    cache files, I free up 50GB or more, but manual intervention isn't a great option.
    Any ideas on where to troubleshoot this issue or what settings might be messed up that allows for this?
    Thanks

    How much of this is software updates?  Like in 2007 software updates are not counted against the cache size:
    "You can configure the location and amount of disk space that Windows Configuration Manager clients use to store temporary files for when they install applications and programs. Software updates also use the client cache, but software updates
    are not restricted by the configured cache size and will always attempt to download to the cache"
    https://technet.microsoft.com/en-us/library/gg712288.aspx
    http://www.sccm-tools.com http://sms-hints-tricks.blogspot.com

  • Where are the jvm min and max sizes set?

    Guess I should know this. EAC, Workbench, dgraph - were are the minimum and maximum sizes of these jvms set? I don't see them set up as part of the command line arguments.
    TIA
    Edited by: EndecaJoe on Oct 24, 2012 6:59 AM

    EndecaJoe wrote:
    And this points out how I am still confused.
    I am sure you are correct, but I see this when I do "ps"
    ... <>/apps/endeca/MDEX/6.2.2/bin/dgraph ...
    which is why I say "dgraph process".
    It is a process so it shows up in a ps command (or top, etc.) but it's not a Java process. The MDEX Engine is written in C++, not Java, and it runs in its own "container" unlike something such as the EAC which runs inside of Tomcat.
    And on the first response I don't understand the differenece between PlatformServices or EAC. I always think of these as being the same.
    Probably just a semantic difference. Platform Services includes the EAC among its components (another would be Forge) and is the software package you install. EAC is a part of that and it runs inside of a Tomcat container that is installed when you install Platform Services.
    Hope that helps...
    Patrick

  • Filename and path sizes and characters

    I am failing to load 4000+ tracks to my Ipod from my XP machine using Itunes 7.50.0.20. This is an Ipod Clickwheel 20GB. I want to load 17.86GB in the now empty Ipod. However it gets so far then stops saying there is not enough space.
    I wonder if am I getting the wrong message?
    Some of my tracks have very long filenames/paths e.g 124 charactere filenames and 213 character paths. I also have some filenames with " (double quote) in.
    Could this be the reason?
    If so what characters must I avoid and what size should the filename and paths be limited to?

    Filenames and paths are irrelevant. They are renamed on the iPod anyway.
    20 GB is not really 20. It is a rounded number all HD manufacturers use. Plus you lose some space due to formatting and the iPod software. There is also meta data for the songs which takes some space.

  • Photoshop CC 2014 UI Menu Text And Icon Size?

    so i really like that adobe has added the "experimental" option to increase the ui menu text and icon size in photoshop cc 2014, it was almost unreadable on my 2560 x 1440 27" monitor with photoshop cs4 and illustrator cs4, but the lone 200% setting is too big... seems that 125%, 150%, or maybe even 175% would be much better solutions. in fact, for reasons i can't quite understand, the ui text and icon size in illustrator cc 2014 is spot on, absolutely perfect on my monitor, even tho there is no option for increased ui size as far as i can tell, it was spot on the moment i installed and launched it.
    in short, the photoshop cs4 and illustrator cs4 user interfaces were identical in size as far as i could tell, and far too small on my 2560 x 1440 27" monitor. in terms of cc 2014, the illustrator ui is perfect out of the box on my monitor, considerably larger than illustrator cs4, while the photoshop cc 2014 ui is identical to cs4, tiny, but can be enlarged 200% which makes the ui too big. why couldn't/didn't adobe just make the photoshop cc 2014 base ui the exact same size as the illustrator cc 2014 ui? it would have been perfect (for my monitor size).

    thanks... just wish illustrator cc 2014 wasn't so perfect in terms of ui size, i mean it's just great and, consequently, makes it seem as if the ball was dropped with photoshop cc 2014... i mean how can one be spot on while the other be so far off?

  • Install AD / SQL Server 2012 and SharePoint 2013 on a single server as Development Environment

    Hi All,
          I'm planning to prepare a SharePoint 2013 development environment. The current idea is to install Domain controller, SQL Server 2012 and SharePoint 2013 all on a single server. Even though this is for development purposes,
    would there be any limitations specially when it comes to SP 2013 functionalities according to your experience?
    Some articles i referred.
    http://sharepoint-tutorial.net/post/2012/07/18/install-sharepoint-2013-domain-controller.aspx
    http://social.technet.microsoft.com/Forums/en-US/f438c9a6-02e8-43d3-9963-7a0608f0b961/sharepoint2013-on-domain-controller
    Thanks,
    Dilip

    Hi
    i understand this is a sandbox environment but you should be able to install everything.
    http://sharepoint-tutorial.net/post/2012/07/18/install-sharepoint-2013-domain-controller.aspx
    Hope this helps. Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

  • Hyper link of public image(hyperlink or image) can not be saved on windows server 2012 and sharepoint 2010 problem

    hyper link of public image(hyperlink or image) can not be saved on windows server 2012 and sharepoint 2010 problem, is this a bug?
    thanks for any reply.
    Rosone

    It is not a bug, you might be using IE in Windows server 2012 and and browser might be restricting your site actions to respond properly.
    Check this in a different browser or access site in a differ OS.
    Adnan Amin MCT, SharePoint Architect | If you find this post useful kindly please mark it as an answer.

  • TS2755 I am trying to find a message from 2012 and when I load previous messages it only goes back so far then the program quits and sends me to the home ( main) screen. How can I find the message and get around this?

    I am trying to access a message from early 2012. When I load previous messages It will only go back to oct 2012 and then the program stops and kicks my to the home page. Anyone know how I can get to the message? Thanks.

    Try Spotlight Search
    1. From any Home screen page of iPad, drag your finger down anywhere on the center of Home screen.
    2. Spotlight search will now appear and you can search for apps, texts, or any other content you'd like just as you did on previous versions of iOS.

  • How to change DEFAULT font and font size on new Pages document

    When I open a new Page document, it always comes in with a default font and font size. I know how to change those settings on the open document.
    I want to know how to change the ~default~ font and font size so that a new Page document always opens with those default settings.
    -Thanks for your service to the community.

    Hi Lionate
    Welcome to the forum.
    Make a document to your liking.
    Change the Body style and any other styles in :
    +Menu > Show Styles Drawer > click on the little triangle next to Body > redefine Style from Selection+
    Capture the page:
    +Menu > Format > Advanced > Capture Pages… > Name it > OK+
    +Menu > Format > Advanced > Manage Pages… > Delete other Sections/Pages > OK+
    Save as a template:
    +Menu > File > Save as Template…+
    +Menu > Pages > Preferences > General Preferences > For New Documents > click Use template: > Choose > browse to the template above+
    Peter

  • Error loading Virtual Machine Manager 2012 and Data Protection Manager 2012 modules together

    Hi.
    Very strange issue: when i try to load together Virtual Machine Manager 2012 and Data Protection Manager 2012 modules - script fails. If first loaded Virtual Machine Manager 2012 module:
    Import-Module : Cannot load Windows PowerShell snap-in C:\Program Files\Microsoft Data Protection Manager\DPM2012\bin\ObjectModelCmdlet.dll because of the following error: Unable to load one or more of the requested types. Retrieve the LoaderExceptions property
    for more information.
    Loader Exceptions:
    Could not load type 'Microsoft.Internal.EnterpriseStorage.Dls.Utils.AlertTypes.AlertEnum' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    At C:\Program Files\Microsoft Data Protection Manager\DPM2012\bin\Modules\DataProtectionManager\DataProtectionManager.psm1:2 char:14
    + Import-Module <<<<  (Join-Path $cmdletDllPath ObjectModelCmdlet.dll)
        + CategoryInfo          : ResourceUnavailable: (:) [Import-Module], PSSnapInException
        + FullyQualifiedErrorId : PSSnapInLoadFailure,Microsoft.PowerShell.Commands.ImportModuleCommand
    If first loaded DPM 2012 module::
    Import-Module : Cannot load Windows PowerShell snap-in C:\Program Files\Microsoft System Center 2012\Virtual Machine Manager\bin\Microsoft.SystemCenter.VirtualMachineManager.dll because of the following error: Unable to load one or more of the requested
    types. Retrieve the LoaderExceptions property for more information.
    Loader Exceptions:
    Could not load type 'Microsoft.VirtualManager.Utils.TypeConverterEnumHelper`1' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.TypeConverterEnumHelper`1' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.CarmineException' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Method 'get_BootOrder' in type 'Microsoft.SystemCenter.VirtualMachineManager.ClientObjectHWSettingsSourceAdapter' from assembly 'Microsoft.SystemCenter.VirtualMachineManager, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35' does not have
    an implementation.
    Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.VMComputerSystemState' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.VMComputerSystemState' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.VMComputerSystemState' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.VMComputerSystemState' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.VMComputerSystemState' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.VMComputerSystemState' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.VMComputerSystemState' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.VMComputerSystemState' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.VMComputerSystemState' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.VMComputerSystemState' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.VMComputerSystemState' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.VMComputerSystemState' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.VMComputerSystemState' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.VMStartAction' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Method 'get_BootOrder' in type 'HardwareConfigSettingsAdapter' from assembly 'Microsoft.SystemCenter.VirtualMachineManager, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35' does not have an implementation.
    Could not load type 'Microsoft.VirtualManager.Utils.VMStartAction' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.VMStartAction' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.VMStartAction' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.VMSCSIControllerType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.VMSCSIControllerType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.ServicingTypeValues' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.FabricCapabilityType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.SKUType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral,PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.VMComputerSystemState' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    At \\team\dfs\scripts\Admin\Scvmm\Move-VirtualMachine.ps1:103 char:16
    +         Import-Module <<<<  'C:\Program Files\Microsoft System Center 2012\Virtual Machine Manager\bin\psModules\virt
    ualmachinemanager\virtualmachinemanager.psd1';
        + CategoryInfo          : ResourceUnavailable: (:) [Import-Module], PSSnapInException
        + FullyQualifiedErrorId : PSSnapInLoadFailure,Microsoft.PowerShell.Commands.ImportModuleCommand

    Vote if you have same problem:
    https://connect.microsoft.com/PowerShell/feedback/details/873348/scvmm-and-scdpm-powershell-modules-cant-work-together

  • Drag and Drop and Image Size

    I need to be able to drag and drop images but I need them to be a certain size when I drag them out of an Aperture project. For various reasons, I don't want to use the export function. Only drag and drop will be efficient for the workflow that I"m planning. Problem is, the pixel dimension is not wide enough when I test it by pulling an image on to the desktop.
    My ultimate goal is drag them, sized and ready to go, and drop them onto a web browser upload page. I don't want to fumble with the extra steps of exporting them to another folder on the desktop and then upload the images from that folder to the browser.
    So does anybody know how or if it's possible to control the drag and drop SIZE /DIMENSION of an image?

    The drag and drop size is determined by your preview settings. What actually gets "dragged & dropped" is the preview, not the master file. You can control the quality and size of the preview in the Aperture preferences.

  • Hey, for some reason i turned on my macbook pro 2012 and it says i have no internet access. I then found out that it also says that my self assigned ip address will not connect to the internet. How is this and how can i fix it?

    hey, for some reason i turned on my macbook pro 2012 and it says i have no internet access. I then found out that it also says that my self assigned ip address will not connect to the internet. How is this and how can i fix it?

    Reset your modem.

  • I have many photos with file extension of .PDD and that Photo Deluxe 4 no longer will operate in Win 7. How can I open?  Next in Elements 11, how do I load and print different pictures and different sizes options on the same page?

    I have many photos with file extension of .PDD and that Photo Deluxe 4 no longer will operate in Win 7. How can I open?  Next in Elements 11, how do I load and print different pictures and different sizes options on the same page?
    Thanks,
    Shir

    sbmgrams wrote:
    I have many photos with file extension of .PDD and that Photo Deluxe 4 no longer will operate in Win 7. How can I open?
    See here:
    Reading PhotoDeluxe PDD Files

Maybe you are looking for

  • WIndows not recognizing my ipod shuffle ?!?

    I've downloaded itunes, tried researching and troubleshooting til I'm blue! I plug in the ipod and the only thing my device manager shows is USB mass storage device. By the way, my ipod did NOT come with an installation disc. And yes it's fully charg

  • SALES INVOICE PLD

    SAP Gurus, In my Scenario at One of Our Warehouse there are two types of Invoices 1) TAX Invoice 2) Retail Invoice We have hard coded 'TAX Invoice' and 'RETAIL Invoice' on two seprate PLD Layouts. I have assigned PLD's  by default to BP as per requir

  • My iPad2 does not show it's position on a map when using find my iPad on mobile me

    Installed find my iPhone on my iPad2 and my iPhone 4 however the iPad will not show up on a map whereas the iPhone does. iPad is wifi only and is connected to my wireless network. I have registered and even sent test notification to the iPad which al

  • Is this even possible with itunes

    Hi everybody, Just wondering if it were possible to see the album artwork change in itunes after you play the next song -- currently I have to reclick on the screen to see the album art work... thanks a million

  • I did my iphone update an i lost my memos, how can i do to recover it?

    I did my iphone update an i lost my memos, how can i do to recover it? IOS 5 to 6