2013 "Disable First Run Movie", "Disable Office First Run on application boot" Enabled. Still showing "Welcome to your new Office".

As title says.
Both Disable Office First Run on application boot and
Disable Office First Run on application boot are enabled via GPO, confirmed via gpresult /h. But then when I open the application the "Welcome to your new Office" screen shows.
I have also set the following:
Automatically receive small updates to improve reliability"
Enable Customer Experience Improvement Program"
Enable Customer Experience Improvement Program
Send Office Feedback
All to disabled.
But still on first running say Word 2013 I get the "Welcome" screen...
So what am I missing?

I also have the setting 'Disable the Office Start screen for all Office applications' enabled.
This does not stop the Welcome Message.
Welcome screen:
http://blogs.technet.com/b/odsupport/archive/2012/11/14/how-to-manage-the-first-run-screens-that-appear-when-microsoft-office-2013-applications-are-first-launched.aspx
http://technet.microsoft.com/en-us/library/cc179123(v=office.15).aspx
-=-=-
Start screen:
http://www.maketecheasier.com/disable-start-screen-in-microsoft-office-2013/
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

Similar Messages

I'm trying to make some room on my iMac hard rive, which is almost full after 4 years of movies,music, pictures, etc. I bought an external hard drive and thought I moved most of the movies and pics to the ext drive, but they still show as taking up space

I recently got a message saying that my startup disk was almost full. I tried moving files on to an external drive to make some space, but the files still show as taking up room when I look at my product info storage. The files appear to have been moved and deleted off of my internal drive. I copied them from one to the other and then moved the ones on the internal to my trash and then emptied the trash folder. What else can I do. When I open iMovie, even though I moved the movies from the iMovie folder, they still load as iMovie thumbnails, which takes forever. I appreciate any suggestions. Thanks.

First of all make sure that you've definitely backed up the movies to your external hard disc.
In iMovie click on any event you don't want, go to the file menu and select 'move event to trash'. Then do the same for any unwanted projects - 'move project to trash'. Quit out of iMovie and empty the trash.
Hope that helps!

My MBP runs Yosemite but app store still shows it's to download

I wonder why app store still shows Yosemite to "download" when it's installed?

That's normal.
It means you can download it again in case you want/need to installed again at a later time
In my case, as i have two machines and I don't want to download the 5GB again, I didn't install right away, I first stowed the "Install Yosemite" application to an external disk and then installed from there. Now I can upgrade the second machine without downloading again

After upgrade to 10.10, can't send email (SMTP cert. error). On previous version running on another machine, can still send find. This new version is missing the "Usual Ports" checkbox option. Can someone please help?

I just upgraded to 10.10. On the mail program, one of my accounts is having an issue sending email. I am getting the following error message:
The certificate for this server is invalid.
Select a different outgoing mail server from the list below or click Try Later to leave the message in your Outbox until it can be sent.
But on another machine running Mavericks, I can still continue to send email. The same is try from my iPhone 5S.
On that machine running Mavericks the SMTP is configured as SSL and for "Usual Ports" (25, 465, 587) but THIS OPTION IS MISSING ON THE NEW VERSION. On the new version I have tried configuring the port to 25 and then 465 and 587 with no success. I have used the Network Utility to see if my provider is blocking me -- it is not. I have no third-party software on this machine (anti virus). I can receive email fine. On the new Yosemitie Mail there are new checkbox options of Automatically check my settings and Allow unsecure connections. I tried to uncheck SSL for SMTP but then it says it cannot send securely my passowrd and i need to check the option "Allow to send unsecurely". I did that but the same error message keeps appearing. So I have tried nearly everything I have been able to, all to no avail. Please can somebody help?

Thanks for your reply. Yes, it is a POP account. Incoming mail is fine. My port for incoming is also 110. But the outgoing port should be 587 (or 24, 465 and 587 as on Mavericks' "Usual Ports" option). I am using the same configuration across three different devices and only the machine running Yosemite is having issues. I notice in the new version of Mail there is no longer the "Usual Ports" option. I am not sure this is the culprit or not. But the fact is no matter how I configure it, it will not send mail for these particular servers. I have multiple clients and only one is affected, meaning I can send email from other email addresses (different hosting contracts) on Yosemite but on this one particular one I cannot.

I'm running Firefox 35 but I still don't have the new Search section in my Options.

It wasn't working when I upgraded to 34.0.5 even though Firefox on my work laptop had it from that version. I'd hoped the upgrade today to 35 would have sorted it but my search bar is still running in the old format and that section isn't displayed at all in my Options. Can anyone help explain what might be different with this install/configuration?

Thanks very much the-edmeister. The about:config change sorted it. Not sure how that had been set to false? All working now anyway. Thanks again for your help.

I rented a movie an hour ago in my iPad and its still showing "waiting..." .what is this?any ideas?

I restarted my iPad and still shows the same. Also I think my account has been charged

Having the same problem. Watched 25 minutes of a rental and it stopped with the message"unable to load video"
Using current version IPad mini.
Ios7 is HUGH PIECE OF CRAP!!!!

AppV5 Excel/Office ProPlus 2013 Click to Run Sequencing (and include some native Addins)

Hello,
We need two native Excel 2013 Addins: PowerPivot and PowerView. Since Office 2010 is installed locally on all client machines I would like to virtualize Excel 2013 (Click to Run) with these two addins. Licensing is no issue because an
Office 365 subscription will be purchased.
So, I have successfully sequenced Excel 2013 with AppV 5.0 SP1 via the Office Deployment Tool. It all seems too easy:
First download sources (setup.exe /download configuration.xml)
Second configure sources (setup.exe <xml file>)
Last create the AppV package (setup.exe /packager <xml> <path to save .appv package>)
My Configuration.xml file looks like this:
<Configuration>
<Add SourcePath="\\serverr\share" OfficeClientEdition="32" >
<Product ID="ExcelRetail">
<Language ID="en-us" />
</Product>
</Add>
<Display Level="None" AcceptEULA="TRUE" />
<Logging Name="Office2013Setup.txt" Path="%temp%" />
<Property Name="AUTOACTIVATE" Value="1" />
</Configuration>
But I end up with an Excel 2013 AppV package that:
Doesn’t include the addins (no wonder because I didn’t sequenced it myself).
All the 'first run wizards' popup at launch (Default File Type question & Welcome to your new Office). Normally I disable these with OCT for physical installations, or configure them while sequencing.
Is there a way to disable the first run wizards in the “setup.exe /configure” step? And can I add Excel Addins during package creation? Or need I script this within the DeploymentConfig.xml/UserConfig.xml with a .reg import for example?
Thanks,
Ben

Hello,
We need two native Excel 2013 Addins: PowerPivot and PowerView. Since Office 2010 is installed locally on all client machines I would like to virtualize Excel 2013 (Click to Run) with these two addins. Licensing is no issue because an
Office 365 subscription will be purchased.
So, I have successfully sequenced Excel 2013 with AppV 5.0 SP1 via the Office Deployment Tool. It all seems too easy:
First download sources (setup.exe /download configuration.xml)
Second configure sources (setup.exe <xml file>)
Last create the AppV package (setup.exe /packager <xml> <path to save .appv package>)
My Configuration.xml file looks like this:
<Configuration>
<Add SourcePath="\\serverr\share" OfficeClientEdition="32" >
<Product ID="ExcelRetail">
<Language ID="en-us" />
</Product>
</Add>
<Display Level="None" AcceptEULA="TRUE" />
<Logging Name="Office2013Setup.txt" Path="%temp%" />
<Property Name="AUTOACTIVATE" Value="1" />
</Configuration>
But I end up with an Excel 2013 AppV package that:
Doesn’t include the addins (no wonder because I didn’t sequenced it myself).
All the 'first run wizards' popup at launch (Default File Type question & Welcome to your new Office). Normally I disable these with OCT for physical installations, or configure them while sequencing.
Is there a way to disable the first run wizards in the “setup.exe /configure” step? And can I add Excel Addins during package creation? Or need I script this within the DeploymentConfig.xml/UserConfig.xml with a .reg import for example?
Thanks,
Ben
You said you used the Office Toolkit? In this you can set Disable Opt-in Wizard on first run.
Was this used when installing on the sequencing machine?
Alternatively you could attempt to launch excel during the sequencing phase and go through those menu's to ensure they don't launch on first launch of the virtual Excel. I believe that shouldn't be a problem since.
For the Add-in's, it seems like you know they weren't included or connected in any way, that's likely the issue with those.
PLEASE MARK ANY ANSWERS TO HELP OTHERS Blog:
rorymon.com Twitter: @Rorymon

How do I keep photos and videos on an external hard drive and run the application on the macbook

I am running out of space on my Macbook and would like to move all my photos and videos to an external hard drive to free up disk space. How do I designate those drives as the destination drive when running the application (iPhoto, iMovie) on the Macbook.

Moving your iTunes Music folder   http://support.apple.com/kb/HT1449
Moving your iPhoto library    http://support.apple.com/kb/HT1229
Moving iMovie footage to another drive    http://support.apple.com/kb/HT1026

Help: How can my user run my Application

Group,
I created a user "test1" as developer, user "test2" as end user at the same workspace TT. Then I created the application testapp1 as "test1".
Then I login to my website http://localhost:7777/htmldb/htmldb_login as
workspace: TT
username: test2
password: temppassword
But after I login as test2, there is only one item "administrative", I do not see any applications that test1 just creaetd. How couild I make the application created by "test1" seen by "test2"? How can "test2" run the application "testapp1"?
Thanks very much for your help.

I think if you read the thread carefully, you'll find that it's not suggesting you give out your developer password. It's suggesting that you give your users a URL that takes users directly to the application rather than the development environment (workspace), e.g.
http://www.myurl.com/pls/dad/f?p=101:1
Where 101 is the application ID and 1 the page where you'd like the user to start. If authentication is required, the user will be presented with a login page. If you want a menu of applications, you'll have to create a static page with links to each application. You could also implement a menu using a public HTML DB application with a list of links.
Sergio

Why do my videos still show in my movie icon once they are expired

Once I've watched a rental movie on my ipad and it's expired it still shows in my video icon. I can't delete the. How can I get them out of my videos list?

You are only seeing the History only. It does not take any space on iPad.
Settings>iTune and App Store>SHOW ALL>Videos>Off
Message was edited by: Diavonex

Office 2013 click to run: configure specific options like in /admin setup

Hi,
In an Office 2013 click-to-run install, how can we set f.e. the Exchange server, disable Junk mail protection (we have a seperate system for that), disable RSS, username to be used in Outlook (%username%) etc?
We have that when using the office 2013 setup.exe /admin but not in the click to run.
I don't find these options in the config.xml reference: http://technet.microsoft.com/en-us/library/cc179195%28v=office.15%29.aspx
Please advise.
J.
Jan Hoedt

Hi Jan,
Click-To-Run version of Office 2013 does not contain the Office Configuration Tool (OCT). And the
Config.xml file mentioned above is used to customize Windows Installer-based Office 2013 installations, not for Click-To-Run version of Office.
To configure these specific options for Click-To-Run version of Office 2013, you can use
Group Policy Administrative Template files (ADMX, ADML). The policy settings apply to both Windows Installer-based (MSI) and Click-to-Run version of Office 2013.
Download link for the Group Policy Administrative Template files (ADMX, ADML):
http://www.microsoft.com/en-us/download/details.aspx?id=35554
Here is the reference you'll need:
http://technet.microsoft.com/en-us/library/cc178992(v=office.15).aspx
Regards,
Ethan Hua
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

Office Web Apps - how to disable office web apps features for one web application

ENV: Sharepoint 2010 farm with office web apps + fast search
I have the requirement for one web application to open all its documents in client applications - I can enable feature "OpenInClient". This web application uses team site template and other web application also uses team site template. ( feature
stapling ruled out) Now I can run powershell cmdlet to enable this feature on all the currently existing site collections. But the requirement is to enable this feature for all the future site collections. This web applications has 60 k site collections
and atleast more than 10 site collections get created each day and they dont like the option to run a powershell script each day to activate this solution.
Is there any other way to by default activate new site collections on this WA to open in client applications by default (can we disable this office webapps features only on one web app)?
VM

I have learnt from this forum that it is not possible to turn off Office web apps on single web application. The line of control lies at farm level and then at site collection.
Disable
Office Web Apps on web application
VM

Disable Office Integration?

Is there a clean way to disable Office integration in
Contribute 4? Our web people don't need it, and in fact insist that
it not be used. We have experienced some of the same problems
described in other threads -- it causes MS Word to crash. We've
used the suggested workarounds, but we'd rather not have it
contaminating our MS Word installations, period.

If you have already installed Contribute 4 and want to remove
the installed toolbars, you are able to do this by following the
following instructions:
Choose Start > Run, type appwiz.cpl in the Open text box,
and then click OK to open the Add or Remove Programs dialog box
Locate and select Adobe Contribute 4 and click Change.
When the Wizard appears, click Next.
Select Modify and click Next again.
Uncheck the plugins you want to remove and click Next.
Click next and then click Install.
The programs selected should now open up with the Contribute
toolbar removed.
**If do not want to install Toolbars during the intial
installation - Do not chose the default installation and instead
choose Customize the installer, and uncheck MS Office when you go
through the wizard.

Lync 2013 disabled user can still login.

Ok. so we have this weird behavior and it's been driving us crazy for over a week. We have a lync 2013 deployment on a forest with several child domains.<o:p></o:p>
In the middle of the deployment, we noticed that our changes to the user characteristics were not being updated. Eg: we enable or disable
enterprise voice, no changes. We change the sip URI, log out, login, nothing, no changes. And we noticed that if we disable the user from Lync server (from the lync controlpanel), the user can still login. We assumed some lag on AD replication, but no, a user
can still login after a week!<o:p></o:p>
The deployment is a standard Lync 2013, single FE, with a single Edge server. We have enabled Enterprise voice, changes to the enterprise voice routes are
working, if we enable or disable a route we can see it on the client, but changes on the dialplan are not reflected.<o:p></o:p>
I can’t find any reference to this behavior. I know if I disable a user from the AD he can still signing into Lync, but this is different, we are disabling
the user from Lync server. We even removed the user completely from Lync and he can still use it as normal.<o:p></o:p>
We checked the user using adsiedit and the msrtcsip-userenabled is set to false, we even voided the certificate via lync console. Still able to use it.
Suggestions?
Thanks in advance.
Fabio Ricci.

Hi,
Please check if there is any error message on FE Server when the issue happen.
It seems to be the issue of CMS replication.
Please check CMS replication status by running Get-CsManagementStoreReplicationStatus.
If CMS replication not update to the latest version, run Invoke-CsManagementStoreReplication.
If the issue persists, please check Lync Server update, make sure Lync Server update to the latest version, and then test again.
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support

Office 2013 ODT The operating system is not presently configured to run this application

hi!
We have RDS 2012 R2 setup up and running with session host, connection broker, rd gateway and rd web. AS office 2013 can be deployed using APP-V 5 SP2, we have created .appv pkg using ODT as mentioned in this
guide . It was working fine for 2 days and then suddenly we started to get error popup window saying
"The operating system is not presently configured to run this application" . We are receiving this error on Session host server(win 2k12 r2) which is App-V 5 sp2 client, when we try to open any office 2013 app.
And If check on App-v server which is also a publishing server. In event viewer i see this log entry.
Log Name:      Microsoft-AppV-Server-Publishing/Admin
Source:        Microsoft-AppV-Server-Publishing
Event ID:      215
Level:         Error
Description:
The request URL doesn't contain the query string for the client OS.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Microsoft-AppV-Server-Publishing" Guid="{825C7963-9E32-4E3B-B74A-DF2CC3B6822B}" />
    <Execution ProcessID="3092" ThreadID="5176" />
    <Channel>Microsoft-AppV-Server-Publishing/Admin</Channel>
</Event>
SaM

We have the same issue. All other applications seem to work fine.
App-V 5.0 SP1 with hotfix package 2 installed on the App-V Management/Publishing server. We only use Windows Server 2012 RDS instead of R2. On the RDS servers, App-V 5.0 SP2 is installed. We use User Profile Disks and also used the ODT for Office
2013.
I our case it worked for a few hours. We didn't change anything (no updates of other things) other than having a few users try to login with different accounts to test the application. Reinstalling the client doesn't work and we also tried to removed
all AppVClientPackages and then clear the cache from locations like:
%LOCALAPPDATA%\Microsoft\AppV\Client\VFS
%APPDATA%\Microsoft\AppV\Client\VFS
C:\ProgramData\App-V
I'll post a solution if I find one.

2013 "Disable First Run Movie", "Disable Office First Run on application boot" Enabled. Still showing "Welcome to your new Office".

Similar Messages

Maybe you are looking for