21:9 monitor and displayport image not stretched

Hi all
I have this mid 2011 MBA and I just recently bought a new 21:9 Acer 29" LED B296CL monitor to attach to it.
The screen is hooked up with a mini displayport to displayport adapter and a displayport cable going to the monitor.
The MBA seems to give the proper resolution to the monitor (2560x1080) because the image is just fine and the
monitor reports the resolution to be 2560x1080.
However; the image does not fill the entire screen area and no matter what settings i set for the MBA I can not get it
to do so....I have approximately 5cm of black bars on the sides and 2cm on the top and bottom.....
I use the same displayport cable for my other laptop without problems (ie: the image fills the entire screen)...
Any pointers would be very much appreciated :-)

Does turning off »Use Graphics Processor« in CS6’s Performance Preferences and restarting Photoshop have any bearing on the issue?
If so it would indeed probably be related to your Graphics Display Card.
Boilerplate-text:
Are Photoshop and OS fully updated and have you performed the usual trouble-shooting routines (trashing prefs by keeping command-alt-shift/ctrl-alt-shift pressed while starting Photoshop after making sure all customized presets like Actions, Patterns, Brushes etc. have been saved and making a note of the Preferences you’ve changed, 3rd party plug-ins deactivation, system maintenance, cleaning caches, font validation, etc.)?

Similar Messages

Upload and Resize Image not inserting filename in database

I have a form that I created using the insert record form wizard. One of the fields is a file field and my form enctype is set to multipart/form-data. I then used the upload and resize image behavior and set the parameters. When testing the form the file uploads to the correct directory but no entry is made into the database for that particular field. The other fields are entered into the database just fine. If it helps, here is the code generated before the tag:
 
 <?php require_once('../../Connections/test.php'); ?>
 <?php // Load the common classes require_once('../../includes/common/KT_common.php'); // Load the tNG classes require_once('../../includes/tng/tNG.inc.php'); // Make a transaction dispatcher instance $tNGs = new tNG_dispatcher("../../"); // Make unified connection variable $conn_test = new KT_connection($test, $database_test); // Start trigger $formValidation = new tNG_FormValidation(); $tNGs->prepareValidation($formValidation); // End trigger //start Trigger_ImageUpload trigger //remove this line if you want to edit the code by hand function Trigger_ImageUpload(&$tNG) { $uploadObj = new tNG_ImageUpload($tNG); $uploadObj->setFormFieldName("picture"); $uploadObj->setDbFieldName("picture"); $uploadObj->setFolder("../images/"); $uploadObj->setResize("true", 120, 0); $uploadObj->setMaxSize(1500); $uploadObj->setAllowedExtensions("gif, jpg, jpe, jpeg, png, bmp"); $uploadObj->setRename("auto"); return $uploadObj->Execute(); } //end Trigger_ImageUpload trigger // Make an insert transaction instance $ins_team = new tNG_insert($conn_test); $tNGs->addTransaction($ins_team); // Register triggers $ins_team->registerTrigger("STARTER", "Trigger_Default_Starter", 1, "POST", "KT_Insert1"); $ins_team->registerTrigger("BEFORE", "Trigger_Default_FormValidation", 10, $formValidation); $ins_team->registerTrigger("END", "Trigger_Default_Redirect", 99, "../team.php"); $ins_team->registerTrigger("AFTER", "Trigger_ImageUpload", 97); // Add columns $ins_team->setTable("team"); $ins_team->addColumn("id", "NUMERIC_TYPE", "POST", "id"); $ins_team->addColumn("sort", "NUMERIC_TYPE", "POST", "sort"); $ins_team->addColumn("name", "STRING_TYPE", "POST", "name"); $ins_team->addColumn("title", "STRING_TYPE", "POST", "title"); $ins_team->addColumn("description", "STRING_TYPE", "POST", "description"); $ins_team->addColumn("picture", "FILE_TYPE", "FILES", "picture"); $ins_team->setPrimaryKey("id", "NUMERIC_TYPE"); // Execute all the registered transactions $tNGs->executeTransactions(); // Get the transaction recordset $rsteam = $tNGs->getRecordset("team"); $row_rsteam = mysql_fetch_assoc($rsteam); $totalRows_rsteam = mysql_num_rows($rsteam); ?>

If the reason is about memory, warning message should be happened when upload the image, because "show thumbnail" means resize at second time, how come you failed to resize the picture that system let it upload succeed at the first time by the same resize process?
upload procedure
a.jpg: 2722x1814, 1.2mb
upload condition: fixed width 330px, 1.5mb
"upload and resize" a.jpg -> file upload -> "resize engine" -> passed (but not work and no warning message)
"show thumbnail" a.jpg -> "resize engine" -> failed (not enough memory)
it doesn't make sense.
and you miss an important key point, I upload the same picture myself, and resize work, so I said it happened at random, and that's why I am so worried.

Web pages and/or images not loading

This problem started a few weeks ago once every few days or so, then got more and ore frequent where now it is happening multiple times each day.
I am using Safari 6.1 on an iMac running OS 10.7.5
Random web pages (some way more than others) will not load when I go to them. Sometimes, the text of the pages will load, but no images. Sometimes the URL progress bar will go across about an inch and the screen will go to blank white (this is most often) and it will just sit there. If I leave it alone, usually the web page will finally load about 4-10 minutes later on its own.
I have talked with my ISP and we have tried the following fixes, with no positive results:
When the problem happens, I try pinging the website {using Network utilities) and it always pings just fine.
When the problem happens, I run Traceroute (using Network utilities) and email him a screen shot of the results.
I have changed my DNS numbers to OpenDNS, per his comments.
I have removed the router and plugged in direct.
I have replaced all my Cat5 cables with new Cat6 cables.
While the problem is happening, he can ping me just fine from his end.
When the problem happens, I open Firefox and go to the same site, and have the same blank results in Firefox.
When the problem happens, I can open a new Safari window and go to other sites just fine.
This morning, I had the same issues, so I left it to clear on its own. I then went to Outlook to check my email and I had two emails where the images would not load at all, just like the web pages. So I left it alone for over 20 minutes and still no loading. Then I quit Outlook, re-opened it and the images came in just fine. During that 20 minutes, the web pages loaded in Safari in the background.
I found and read a discussion about this issue ( https://discussions.apple.com/message/22125235#22125235 ) and per that conversation, I created a GUEST user account, closed out of my account and logged in as a GUEST. I then used Safari to browse the web ans while it was faster, eventually after about 30 minutes, I found a page that would not load (one of my usual suspect pages). I then sat back and let it go and after 5 minutes, the page loaded just fine.
HELP!!!!!
John

Interesting side note . . .
After writing this (above), I clicked on the SUBMIT button at the bottom of the page and the screen went blank white and it sat there for more than five minutes, when it finally went through. SO, i had my problem occur while submitting my question about the problem!
Awesome!

Monitor and printer colours not matching!

Hi, when I print, the colours do not match my monitor! Using CS6.

There's no easy answers here, you have to read up on color mangementnt, calibration and all that stuff. Start by reseting any color tweaks to factory defaults on your monitor and printer. Beyond that it's a topic peopel write books about and nobody can answer this in two simple sentences. Scour the print-centric forums for Illustrator, Photoshop and InDesign for some posts from the past that offer basic guidance and research the topic on a more generic level with a web search.
Mylenium

Likely bug with external editing (in CS5 not CS6 beta) and edited image not showing back up in LR

I have come across something strange today that I've not seen before. I'm running LR 4.0 under Win7 64-bit. I usually use Photoshop CS6 beta as my external editor, but invoke CS5 when I have to use some tools that don't support the beta. Here is the scenario:
* I have CS5 open
* I externally edit an image in CS5 and Save it from CS5 when I'm done
* The edited image does not show up in LR
* I close LR and reopen it
* There is the edited image!
I have duplicated this many times this evening. I don't think I've seen it when I've used CS6 beta.

Something strange is going on because I had the behavior reported of edited image not showing up after using another filter, Nik Silver Efex Pro 2.

Monitoring and recording feature not working in UCCX

Hi,
The recording and monitoring option is not working in the new UCCX setup I have installed.I have configured following things for desktop monitoring as per the document
1)Checked that IP Phones are diasy chained and speakers of Supervisor's PC is working,NIC card of agent's and supervisor desktops are compatible
2)In web CDA P phones to be monitored have been configured
3)In CCM configured the phone for "Span to PC port" as enabled also configured "Advertise G.722 codec" as disabled
4)Ran postinstall.exe on agents system and checked if correct NIC adapter is being used for monitoring
5)Checked the NIC binding order in UCCX server and that is correct
I noticed one thing that "services" in both CAD and CSD are showing as "partial services" and they are monitoring and recording services only.Hence is this problem related to these services? How do i correct the recording and monitoring issue?
Regards
Amit

/* Style Definitions */
table.MsoNormalTable
{mso-style-name:"Table Normal";
mso-tstyle-rowband-size:0;
mso-tstyle-colband-size:0;
mso-style-noshow:yes;
mso-style-priority:99;
mso-style-qformat:yes;
mso-style-parent:"";
mso-padding-alt:0in 5.4pt 0in 5.4pt;
mso-para-margin-top:0in;
mso-para-margin-right:0in;
mso-para-margin-bottom:10.0pt;
mso-para-margin-left:0in;
line-height:115%;
mso-pagination:widow-orphan;
font-size:11.0pt;
font-family:"Calibri","sans-serif";
mso-ascii-font-family:Calibri;
mso-ascii-theme-font:minor-latin;
mso-fareast-font-family:"Times New Roman";
mso-fareast-theme-font:minor-fareast;
mso-hansi-font-family:Calibri;
mso-hansi-theme-font:minor-latin;}
I would first recycle the VOIP Monitoring Service on both node if this is HA. This will not affect calls or call processing.
In addition, you stated you ran post install on the clients desktop but have you ran post install on the server itself?
In the desktop Administrator, what server is selected to be the default VOIP Monitor server?
Jason M. Hutchinson

Ringtones and background images not available after call manager upgrade

Hi,
We have upgraded our call manager from version 8.5 to 10.5. Once after the upgrade we lost all the Ringtones and background images except the two default ringtone and background images. we got 8945 sccp phones(running 9-3-1 firmware) and 9951 sip phones(running 9-4-1 firmware). Both these phones lost these list. However the ringlist.xml is available in the tftp server with all the ringtones and the phones are pointed to the right tftp servers. I tried to restart the tftp servers and tried again, however that didn't help. we are using call manager 10.5 and h323 voice gateway. Could anyone please help on this.
Thanks
Barry

Hi Tony,
I can see the ringtone files in the call manager (osadmin>tftp file mgmt), i have also restarted the tftp services, but it didn't help. I believe you advised to re-upload the ringlist file (Ringlist.xml) and try again. I will try this and update you. Please let me know if you have any other suggestions.
Thanks
Barry

Canon Pixma MG5250 scans and prints images wrongly stretched/contracted

hi!
i have a problem with my pixma 5250 which is an all in one. When i scan an image, what i get on my screen is an image with the correct width, but with a shorter height.
see this image:
i have tried two different programs to print, tried updating the driver, fiddled with scanning settings on the printer, tried several different scanning settings in the software, tried different images, but to no avail.
When i try to print, however, it seems that the effect goes the other way round: now the images i want to print are strechted along the vertical axis, but still of the same width.
see this image:
Anyone got an idea what could cause this problem? Is it a hardware thing? A driver malfunction? Maybe my OS (Win XP)? I must add that i have issues with my hard drive, and with my usb drives (i connect with my printer via wifi btw) .
Anyone has a clue? I'd be grateful.

Hi thom36,
Regarding the scanning issue, I suspect what is happening is that the scanner is incorrectly detecting the end of the image at the top, causing it to crop incorrectly. Assuming you are using the MP Navigator software to scan, you should see a checkbox in the scan window for "Scan with Scanner Driver. If you put a checkmark in the box, then press Scan it will open Scangear. Within Scangear, press Preview to preview the entire image, then drag a box around the part that you want to include. Press Scan to finish scanning. Everything within the box should now be included in the final scan.
Regarding the picture you are printing, the dimensions of the original don't match the dimensions of the printed picture, so I suspect what is happening there is that it's stretching the picture to fill the whole paper. This can occur when you select borderless printing. If you print the picture without using borderless printing it will give you a true reproduction of the image. One thing to note when you do this is to make sure that the size of the picture matches the size of the paper you are using. For example, if you are printing on 4x6 paper, which I am guessing is the case in the example you provided, make sure that the picture size is no larger than 4x6, or else the entire picture will not fit onto the paper when you print it bordered.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Can I use iPhoto to view and edit images not stored in the iPhoto Library

Hi folks,
I'm a newbie to Mac after 20+ years on PC...just switched 2 weeks ago....wish I'd done it years ago. Everythings so easy and fast...e.g. setup wireless broadband in 25 mins with no probs....and I have never done anything like that.
Here's my Q.
I have a load of images, downloads and scans, of old manuscripts, authors etc. which I don't really want in my iPhoto library (which I would like to keep for actual photos. Is it possible to point iPhoto to another location (say in Documents) where it will let me view and edit these images without importing them into the library.
Alternatively can I view images as thumbnails in this other locations, and not as default file type icons.
Hope this is plain,
JP_MAC
Imac G5 17" 1.9Ghz Mac OS X (10.4.3)

Hi jp-mac,
iPhoto 5 imports all images into it's own database. (this has changed with iPhoto 6 so you might want to check out iLife 6)
The other files you want to view but not have in the library...are they image files?
If so, you can view that folder as icons and then make the icons larger so you can see what they are.
To do this open the folder in question. click the first icon on top of View in the toolbar. This will make that folder contents view as icons
Now go all the way to the top of your screen and click on View>show view options.
Slide the icon size slider all the way to the right to view them larger. Also make sure you have the "show icon preview" checked.
This will work most of the time, but sometimes if you edit images in other applications they might not make icon previews, so check their preferences to make sure you have that checked.
There is also a little third party program that will do it for you.
One is called Pic2Icon
Pic2Icon
Another one is a contextual menu item called QuickImageCM.
QuickImageCM
check out that page because there are some other useful contextual menu items that I use all the time.

Hard Drive and Disk Image not mounting

Hey everyone,
I'm running a G5 Dual 2Ghz. with OSX 10.5.8 I'm having problems with a back up hard drive. It is an external Western Digital My Book 1.5TB SATA drive. After using it for a few months, it suddenly did not mount anymore.
*1) It also would not appear in Disk Utility.*
a) Disk Warrior couldn't find the drive (I think because it's formatted with FAT32)
*2) I then took the drive out of the enclosure and put it in the spare bay in the G5.*
a) It didn't mount
b) It did show up in Disk Utility
c) In Disk Utility it wouldn't give me the option to Repair Disk Permissions or Repair Disk
d) In Disk Utility is says under Partition Scheme: Unformatted
e) In Disk Utility I don't have the option to mount/eject only gives me the "info" option
f) Tech Tool did find the drive and it passed all tests
g) Disk Warrior still did not find the drive
h) TestDisk finds the drive, but does not find any partitions
*3) I then created a disk image of the drive in Disk Utility onto an external hard drive. The image comes back at 320GB, which seems to be about right I think.*
a) The disk image would not mount with Disk Image Mounter. It would say there is an Unrecognized File System
b) In Disk Utility - I don't have the option to Repair Disk Permissions
c) In Disk Utility - When trying to Repair Disk - I get the error: Repairing Disk failed with error Unrecognized FileSystem
d) In Disk Utility - If I click Open - The Log file says:
+Attach Image+
Initializing...
Verifying...
Finishing...
+Image of "disk0.dmg" attached successfully+
+Mount of "disk0.dmg" succeeded+
-But it is no where to be found
e) Disk Warrior can not find the Disk Image
f) I took the new external drive with the Disk Image to 3 other mac computers but the image would not mount
*4. Other things I've tried when opening the Disk Image for the new external drive.*
a) in Terminal - hdiutil attach -nomount "volumes/untitled/disk0.dmg"
b) in Terminal - sudo hdiutil attach -nomount "volumes/untitled/disk0.dmg"
c) Deleting files System/Library/Extensions.kextcache
System/Library/Caches/com.apple.kernalcaches
ALL UNSUCCESSFUL
I'm running very low on ideas. I know I could just erase the drive and reformat it, but the files on it are very important and must be recovered.
Any help or suggestions would be very helpful. I will not have time until after the weekend to try more things. Thanks in advance if you do not hear back from me until after this weekend.

Yes, it will. But if DU says the disk is unformatted then it is also not accessible. If you have files you don't wish to lose then you will need to try recovery software:
Basics of File Recovery
General File Recovery
If you stop using the drive it's possible to recover deleted files that have not been overwritten by using recovery software such as Data Rescue II, File Salvage or TechTool Pro. Each of the preceding come on bootable CDs to enable usage without risk of writing more data to the hard drive.
The longer the hard drive remains in use and data are written to it, the greater the risk your deleted files will be overwritten.
Also visit The XLab FAQs and read the FAQ on Data Recovery.

Disk Utility Crashing and Disk Images Not Opening Properly?

Hi,
I got a new G-Tech 500GB external drive that I've got into three partitions. All of them have Tiger on them but the main one I'm using is giving me problems. I have Stuffit Expander 11 on here and when I try to open a disk image it looks like it's opening but doesn't. Also I try and open Disk Utility and it crashes on me. I did a repair disk permissions a few hours ago after restarting up again and it seemed to be fine but now the problem is back.
The other problem I have on and off is that out of the three partitions I'm supposed to put them in the trash before shutting down and sometimes the two not in use won't go in the trash.
Any ideas? The two other partitions I have right now I'm using for recovery stuff from my internal drive.
S.

Its the improper unmount of the firewire drive which is the problem. Try to reset all.
1. Shut-down your Mac, and unplug the power cord
2. Turn the power off on your external FireWire devices
3. Unplug the FireWire devices from the Mac
4. Wait for 5 min.
5. Plug the power cord to your Mac only
6. Restart the Mac while holding the Option-Apple-O-F, and keep holding until you get the ">" prompt, then release the keys
7. At the ">" prompt type:
      reset-nvram and hit the Return key
      set-defaults and hit the Return key
      reset-all and hit the Return key
the last command will restart your mac
8. Shut down your Mac
9. Connect all your FireWire devices to the Mac and turn them on
10. Restart your Mac.
All your FireWire devices should reapear, if not repeat the procedure
How to avoid the issue :
The only really proven way to avoid burning up a FireWire port is to connect all devices and to turn them on PRIOR turning on the Mac. Likely, one must unplug them and turn them off AFTER the Mac has been turned off. If you need to connect another device, then you're on for a shutdown of your machine...  It's a tad annoying but it guarantees that the FW ports won't be damaged.  Be careful when using self powered devices such as webcams, iPods, hard drives or hubs, as they can destroy the port pretty easily. Another thing is to avoid daisy-chaining hard drives.
When the FW port doesn't respond anymore :
In this case, peripherals won't be mounted upon plugging, and won't be displayed in Apple's System Profiler. The self powered devices will still be fed by the port, but won't respond either.  It happens that the PHY just hangs after a surge or a random problem. Once hung, the port will not respond any longer, it is possible to reset the component by going through the following steps :
1° boot the mac in Open Firmware by holding [ Apple key - Option - O - F ] after the startup chime.  2° you'll get to a command prompt. the keyboard mapping will be QWERTY, so pay attention when you type the following :  RESET-NVRAM (enter)  RESET-ALL (enter)  3° Now the mac should restart itself and the port should function properly again.  If it still doesn't work, then it means that the PHY is damaged.
http://www.hardmac.com/articles/16/

Backup disk and Disk Images not mounting

*Intial Disk Utility problem:* Recently my trusty 6 year old PowerBook G4 died from hard-drive failure, with most of my data backed up on external drives. Before migrating data over to my new iMac, I performed "First Aid" in "Disk Utility" on the external backup drive. One of the drives (500GB iomega drive) that backed up my PowerBook and my PC had 5 partitions (4 were FAT32, and 1 was NTFS), somehow got erased in Disk Utility. Even though I was just verifying one of the partitions the whole drive was cleared and renamed: disk2s4 (28kb) and disk2s10 (372.5GB). This didn't take much time, so I knew all the data hadn't been cleared, and checked the Security Options for Erase, and its set to "Don't Erase Data."
*Disk Warrior attempt:* At this point, having a sorta wrecked backup drive that still apparently had data, I bought Disk Warrior and gave that a try. It read the drive the first time, but couldn't recover any of the directory information. Hoping to not overwrite anything, at that point, I didn't proceed with the "rebuild" option. Now when I try Disk Warrior, it just says:
Directory Cannot be rebuilt due to disk hardware failure (-50,447)
- This disk appears to be a MacOS standard sik
- This disk does not appear on the desktop
- This disk is 372.49 GB in size
- Disk ID: disk2s10
- File system: HFS (standard) +even though most of the drives had been fat32+
Now Disk Warrior doesn't even give the option to scan the drive.
*Disk Imaging attempt:* Disk Warrior is claiming a hardware problem (which isn't really the case), so I tried making a disk image in Disk Utility of both disk2s10 and disk2s4. I tried opening disk2s10.dmg in Finder and in Disk Utility, and get the message: "No mountable file systems." In the past when confronted with unmountable disk images, I've used VLC media player. So, I pull up VLC read disk2s10.dmg and music starts playing!!! At first I freak out, then I realize that its the first song listed in my iTunes library -- the data is there, can be retrieved, but I'm not sure how to get it!
*Next attempts:* the only other thing I can think of is to try daemon tools or something on my PC, or bring the drives into the the school IT guys.
Please let me know what you think would work that I haven't already tried. Though I have redundancy in the backups, I haven't been able to recover some data for my PhD thesis due in a month, and therefore haven't given up on reviving this disk yet.

I've downloaded the DataRescue and FileSalvage trials, and am currently scanning with DataRescue which will take another few hours. Thanks for those recommendations, its so useful to have a trial scan before buying.
*General Question:* I noticed through these various attempts that reformatting extra drives in the current version of Disk Utility has become a little more dangerous than before. For example, I was reformatting a spare disk from FAT32 to HFS+ and the drive became unmountable. This never happened to me in earlier versions of OSX, and now it seems to happen every time, and partly why my partitions got all screwy. Any thoughts?

Gallery title text cut off and cover image not updating

Hello,
I've been struggling with this for a couple of weeks now, and it's driving me mad. I've been making a book in iBook Author on my iMac (10.10.2). When I preview it in iBooks on the mac it all looks fine, but when I send it to my iPad2 (iOS 8.2), which I do via dropbox, the front cover image reverts to the default for the template I choose, and gallery and interactive widget title text gets cut off (see attached pic) regardless of the size I make it, or the indent I specify.
I've tried deleting the book several times, restarted the iPad, and whatever I do it still appears the same.
I'd be grateful for any suggestions.
Cheers,
Kev.

Hi Christine,
When you say " It's not there when viewed outside of Cp/swf. Using v5.5.l", does that mean this problem only occurs in a specific output?
Try this -- Go to preferences-- SWF Size and Quality and under customer, uncheck Advance Project Compression, republish the course and check the results.
Thanks,
Anjaneai

SP 2010 Publishing - Rollup and Page Images not visible when entering page edit mode

All:
Hello, I have an odd issue recently appearing after installation of FEB 2013 CU install. When users select to Edit a Publishing Page the Rollup Image and also Page Image(Article Page Layout) are not visible. Only the "Click here to insert Image from
SharePoint" link is visible.
The issue has be confirmed in 5 servers across two farms
DEV, QA, and PROD on client recently updated
DEV and PROD in a completely separate client farm
I have confirmed the issue does not exist in two separate farms running April 2012 CU. In both of those environments the image appears with issue even in Edit page mode.
In the farms where the issue exists you can click the insert image link and simply hit OK to see the image again. An easy enough work around for tech savvy but my client's content admins are very confused/frustrated by.
Is this a bug? I have confirmed in two separate farms including brand new web applications using out of the box publishing site templates.

Hi.
We have been facing the same issue in a 2013-environment (SP1), but in this case an upgraded 2010 Solution, which still runs in 2010-mode. Because of this, SharePoint still use resource-files in the 14-hive (as we have not performed an upgrade of Master
Pages etc.) The problem is also reproduced on a clean 2010 Site Collection in the same 2013-environment.
I have managed to find the cause of the problem (at least in our environment), and that is that as long as the selected picture/image has
not defined an "AltText"/"Alternate Text" the problem seems to occur.
In other words, try to define an Alternate Text and click OK in the "Edit Image Properties" Dialog.
I don't know if this may be the case for everyone else, but give it a try.
From this, I've further discovered (after hours of js-debugging) that there is a minor change (from 2010 to 2013) in a js-file called "SelectorControls.js" which is responsible for updating the various controls used in Page Layouts etc.
The problem exist in a method called ASO_UpdateButtonsAndPanels(), which checks whether the Image Control in question has content or not (Url). The local variable "hasContent" is then determined of an if statement, if(this.AssetData.ManageLinkDisplayText)
which in 2010 (14-hive) seems to be "true" regardless whether the Control is of type Image or Hyperlink. Further the code checks for AssetText (Alternate Text) which on an Image may be left empty.
In 2013 (15-hive) however, this if statement has been changed to, if(this.SelectorType==ConstLinkSelectorType), which clearly states "Image" or "Link" depending on the type of control.
I don't know if this is the cause of the problem in 2013, but in 2010 it seems to be exactly that.
Pending a solution from Microsoft, we have modified SelectorControls.js to overcome this issue until the customer decides to do a Visual Upgrade to 2013.
This is by all means not a supported nor a a permanent solution to the problem, as future Hotfixes, Service Pack etc. may "reset" our fix.
Below is a copy of the working solution:
function ASO_UpdateButtonsAndPanels()
{ULSuBa:;
var hasContent=!!this.AssetData.AssetUrl;
//SharePoint 2010: ManageLinkDisplayText is always "True"
//var hasContent=!!this.AssetData.AssetUrl;
//if(this.AssetData.ManageLinkDisplayText)
//hasContent=hasContent && !!this.AssetData.AssetText;
//SharePoint 2013
//var a=!!this.AssetData.AssetUrl;
//if(this.SelectorType==ConstLinkSelectorType) a = a && !!this.AssetData.AssetText;
//Fix for preventing existing selected image to disappear when saving page and/or editing a page with existing image.
if(this.SelectorType!=ConstImageSelectorType)
if(this.AssetData.ManageLinkDisplayText)
hasContent=hasContent && !!this.AssetData.AssetText;
if( hasContent )
if (this.ClearAssetButton !=null)
this.ClearAssetButton.EnableButton();
this.GetAssetSelectedPanel().style.display="inline";
this.GetEmptyPanel().style.display="none";
else
if (this.ClearAssetButton !=null)
this.ClearAssetButton.DisableButton();
this.GetAssetSelectedPanel().style.display="none";
this.GetEmptyPanel().style.display="inline";
I hope this helps anyone else struggling with the same problem.
Thanks!
Øyvind

Rollovers and swap images not working

since i've upgraded to Dreamweaver CS3 i've not been able to create rollovers.. i need to now
is there a bug? a patch that i need? what is going on? I need help please - been able to make do with flash buttons & text until this job.
Running Mac OS10 - if it helps.. these pages were originally designed in go-live and redesigned since - / i wonder if i'm holding my tongue in the correct position. be gentle with your answers - i'm a graphic designer not a web guru

here is the code to three of the rollovers.. it's tabs
i even thought that if i went ahead and uploaded it might work online.. no such luck
<td height="38" colspan="2" align="center" valign="middle"><spacer type="block" width="1" height="379">
 <spacer type="block" width="1" height="1">
 <a href="index.html" onMouseOut="MM_swapImgRestore()" onMouseOver="MM_swapImage('home','','images/tabs/rimtymehomeover.jpg',1)"><img src="images/tabs/rimtymehome.jpg" alt="Home Page" name="home" width="154" height="38" border="0"></a></td>
 </tr>
 <tr height="38">
 <td height="38" colspan="2" align="center" valign="middle"><a href="malone.html" onMouseOut="MM_swapImgRestore()" onMouseOver="MM_swapImage('aboutus','','images/tabs/rimtyme_about_over.jpg',1)"><img src="images/tabs/rimtyme_about.jpg" alt="About us page" name="aboutus" width="154" height="38" border="0"></a></td>
 </tr>
 <tr height="38">
 <td height="38" colspan="2" align="center" valign="middle"><a href="storephotos.html" onMouseOut="MM_swapImgRestore()" onMouseOver="MM_swapImage('storegallery','','images/tabs/rimtyme_storephotos.jpg',1)"><im g src="images/tabs/rimtyme_storephotos_over.jpg" alt="Click here for images of each of our locations!" name="storegallery" width="154" height="38" border="0"></a></td>
 </tr>
 <tr height="38">
 <td height="38" colspan="2" align="center" valign="middle"><a href="credit.html"><img src="images/tabs/rimtyme_getstarted.jpg" alt="GETTING STARTED" width="154" height="38" border="0"></a></td>
 </tr>
 <tr height="38">

21:9 monitor and displayport image not stretched

Similar Messages

Maybe you are looking for