Monitor and printer colours not matching!

Hi, when I print, the colours do not match my monitor! Using CS6.

There's no easy answers here, you have to read up on color mangementnt, calibration and all that stuff. Start by reseting any color tweaks to factory defaults on your monitor and printer. Beyond that it's a topic peopel write books about and nobody can answer this in two simple sentences. Scour the print-centric forums for Illustrator, Photoshop and InDesign for some posts from the past that offer basic guidance and research the topic on a more generic level with a web search.
Mylenium

Similar Messages

Preview and print does not match image in LR

I tweaked an image in Develop and printed some 5x7s until I got it right and then went to 13x19 (first time ever using that size with my R3000). The print preview and the print were way too red. I went back to a 5x7 and it was way red as well in print preview, so I didn't print. I replaced a light magenta cart that I think ran out during the 13x19 print, and then some others that were low, and did a nozzle check and that was okay. I have spent hours looking around all of the settings (sRGB) and can find nothing that would explain what changed between my last good 5x7 print and the red 13x19. I went back to earlier versions and had the same problem. Monitor is due for recalibration, but that probably has nothing to do with it since it changed so suddenly. Any ideas of what to do? R3000, LR 4.3, Win 7, NEC PA 271w, beginner level

A print that is too red / magenta is an indication for double color management, i.e. by Lr and by the printer.
Color management must be done only by one: either by the application (Lr or Photoshop) or by the printer but never by both.
When you select a printing profile in Lr that means that now Lr is doing the color management. Consequently you have to switch off colo rmanagement in the printer dialog (printer driver).
See screen shot:
Or, you can do it the other way round: Let the printer do the color management and select <Managed by Printer> in Lr.

Print priview and print out not matching

I have a developed a script for Goods receipt.
In the Print Priveiw in MB90 all the boxes inserted by me are appearing
but in the print out some of this boxes are not appearing .
Please help its a bit urgent.

Hi
wat you are seeing in the print preview is just the place where the boxes are displayed but unless you specify the intensity or the thicknessof the lines for the box they will not appear in the print.
try giving some intesity as 10.
Regards
Zarina

Preview and print do not match photo

Please help. 4x6 size. Non photo stuff previews normally. We have iphoto 6

How don't they match? Need more info before we can suggest anything?
OT

Monitor and Printer Calibration

I am running a MacPro 4.1 (early 2009). I have older monitor and printer hardware and their related software. Unfortunately, the software will not run because the Mac will not run PPC software. The software has both PC and Mac versions on the CDs. I originally ran these on a PC before switching to Mac. It appears that the manufacturer does not have new or updated software to enable these devices to run on the MacPro, and a Google search has not revealed any other devices that will run on this machine.
My question: Is anyone aware of any new such hardware with software that will run on this Mac?

Check out the blog and topic articles index, and the sections on Lion, RAID, and other issues, plus at the top, "Cloning as Backup Strategy"
http://macperformanceguide.com/blog/2011/20110915_2-LionFullScreen.html
No Mac Pro should be without redundant systems and backup methods.
Definitely not TimeMachine alone, and definitely not when moving to a new OS.
Backup now. Clone you drive. Or just get a new system drive - you will want and need a new OS drive and a backup drive for SL TimeMachine with at minimum room partition set aside for clone.
WD Green 1.5TB $109 makes a good size for both but it is always best to have separate drives / separate backup sets.
Install OS X 10.6.3 and update.
As for "old Sl FILES" you mean your old data? other than Apple Mail and some prefs, should all be the same. And keep your data files off of and on their OWC "data media drive(s)" or something if you don't already, and that makes sense to you. OS / Apps on one, media and projects on 2-3 drives, some external backup drives.
And keep anything you download. Updates, installers, programs, whatever.
Ask Lion Community. There were/are changes in what and how TimeMachine Lion works.
I personally never really had a good warm fuzzy feel about TimeMachine, especially when it was pushed out in "1.0" form in 2007 and had so many bugs and problems even in 10.5.2.
A lack of configuration options and preferences; why do I need to use 3rd party to configure Apple's? So I stick mostly with other programs. To clone, to make backups and archives, to synch.

How can i fix a clip when the video and audio are not matching up?

How can i fix a clip when the video and audio are not matching up? I imported the video from a junkdrive in a .VOB format and concerted to a .mov the videos were filmed on a miniDVD recorder.

I would try detaching the audio and the dragging the audio to the left or right until it lines up.

I would like to add to the Safari toolbar on my ipad 5 IOS 6 machine. I have searched the web and find some instructions to do this but the words and pictures do not match what I can see. I am beginning to think this is not a capabilty of the ipad 5

I would like to add to the Safari toolbar on my ipad 5 IOS 6 machine. I have searched the web and find some instructions to do this but the words and pictures do not match what I can see. I am beginning to think this is not a capabilty of the ipad 5 but perhaps for a Mac computer running Safari. Does anyone know if it is possible to add tools to the toolbar on the latest version of iPad OS & Safari Browser? If so please tell me how. Thanks

You cannot customize the Safari toolbar on the iPad.
What you can do on the iPad is go to Settings>Safari>Always show Bookmarks Bar>On and that will add a bookmarks bar on to the Safari browser.

IMovie will not import or play the clips at the proper speed and the audio and video do not match up.

i have a samsung hd camcorder. it records at 40 fps, but iMovie will not play the clips at the proper speed and the audio and video do not match up. I have tried to record at standard quality to no avail. Help. thanks in advance.

samsung sc-hmx10c ntsc
im guessing that is the speed it records at due to the fact imovie puts a blue 40 at the top left corner of every clip i import.

Storage Breakdown On iTunes and iPhone Do Not Match Up

I will preface this question by providing the following information:
Computer Information
Model: MacBook Pro, mid 2009, 15 inch
Capacity: 1 TB
OS: Yosemite (10.10.1)
iTunes Version: 12.0.1.26
iPhone Information
Model: iPhone 6 Plus, purchased early 1/2015
Capacity: 128 GB
OS: iOS 8.1.2
Okay here's the problem. I was attempting to sync my iPhone 6 Plus with my iTunes library. I have about 50 GB of music which I normally carry around on my iPhone, which amounts to about half of my total storage. On my latest sync, I was told in iTunes that I do not have enough space to complete the sync. Here's what the display looked like:
As you can see:
> The total capacity for audio is displayed as being 49.67 GB (aprox. 6889 songs).
> The total capacity for photos is displayed as being 6.89 GB (aprox. 10,647 photos).
> The total capacity for apps is displayed as being 5.04 GB (aprox. 110 apps).
> The total capacity for other is displayed as being a whopping 45.08 GB.
Upon seeing this, I'm shocked that the other category is taking up so much space. I immediately go to my iPhone to begin trying to eliminate things that could possibly be taking up all this space. When I take a look at my iPhone usage, I see this:
As you can see, the photos and apps are approximately correct, but the songs are way off. In addition, the free space I have on my iPhone according to iTunes is 6.12 GB. According to my iPhone though, I have 47.1 GB (see the screenshot of my iPhone above).
Essentially the storage breakdown on my iPhone and iTunes does not match up. I'm not sure how to fix this problem without restoring the phone, which I want to avoid doing if I don't have to.
Has anyone else had this problem? If so, is anyone aware of a possible solution?
Thanks.

If it was an iOS bug I would expect to see it on the 3 devices I have upgraded to iOS 8. I don't see it on any. I would also expect there to be thousands of posts and views about it, as somewhere over 100 million users have updated. This is the only thread I have seen, and you are the only one posting about it.
Go to Settings/iCloud. Turn off Find my iPhone. Then go to Settings/general/reset - Erase all content and settings. Check your "Other". I would expect it to be minimal.

Accounts and entities do not match in application ownership

Hi all,
I'm working on NW 7.5 SP07 (upgrading in SP09 isn't an option at the moment) and when running Consolidation i am getting the error "Accounts and entities do not match in application ownership".
I am very familiar with Consolidation and created consol appsets numerous times, so I am confident I have set up the dimensions correctly (with all the right properties), appset and app web parameters all look ok, business rules are good, ownership and rate data is all in correct place...but no matter what i do i still get this error.
FX, carry-forward and calc accounts all work ok, so it is simply something wrong with the ownership app or with how finance is talking to it.
There was only 1 thread I could find where others had this issue - many people had the same problem and there was never a clear solution to it ..... [Accounts and entities do not match data in application OWNERSHIP;
Any ideas besides upgrading to SP09?
Tom.

Hi Tom
Thank you for answer. I found some missing data in my ownership cube and now 'Accounts and entities do not match in application ownership' gone but new error appears after validate script in se38 'GETWA_NOT_ASSIGNED'. Have you ever had this kind of error?
SAP sent me some tasks list but it seems to me that I have all settings they sent in that document.
I have a couple of questions and will be very appreciate if you can answer me.
Are additional members in O_Acct necessary? If I use only METHOD PCON PGROUP POWN in my input schedules.
METHOD_SYS
PCON_SYS
PCTRL
PCTRL_SYS
POWN_SYS
POWND
POWND_SYS
Are you using those above for your consolidation process?
Are you using dynamic hierarchy editor or input schedules to maintain your ownership data?
Regards!
Justyna

Username and password do not match

I can no longer authenticate. I get "Username and password do not match".
Is there a file I can edit to reset the username and password?
Thanks in advance,
Mike Britton

We should take a look at the log files to see what's really going on but if you haven't done anything with the installation yet then "reinstalling" is very easy.
In the directory where you launched the jar file, you should find a directory named "crx-quickstart". Simply rename this directory to "crx-quickstart.old" and restart the jar file. Your new environment will be ready in a couple of minutes. Keep the old directory and look into the [your directory]\crx-quickstart\logs directory for details on your original problem.

RUN LOGIC:Accounts and entities do not match data in application Ownership (BPC10.0 NW)

Hello Experts,
During execution of the legal consolidation package we get the following error: "Accounts and entities do not match data in application OWNERSHIP"
We have entered the ownership and transaction data.
Could you, please, help us to solve the problem?
Thanks.

Hi
The Ownership has accounts like Percentage consolidation etc. Please check if you have selected the correct ones, marked as use in consolidation process and loaded Ownership data aganst those .
Regards
Surabhi

Sound and picture did not match?

After recording the presentation it was OK and I could show it. But the fourth time I would show the presentation the sound and animation did not match the pictures? t.i. Keynote did not move to next picture (e.g. I was in picture No. 3 and it shoud move to next picture 4 but it doesn't - and the voice to the next picture No. 4 started continued in picture 3)
Why does this happened? Is Keynote not reliable?

If sound files and images are placed on the slide and timed using Inspector > Builds they will maintain the timing.
I have suggested to do that instead of using the recording feature built in to Keynote which has proven to be unreliable with large numbers of slides and longer voice overs.
Switching to using builds will eliminate these errors.

HT1551 sound and picture do not match

Certain movies on Netflix, when played, the sound and picture do not match. It looks like a voice over. You see lips move to the wrong voice.

various. I have some of my dvds that i converted plus numerous others bought off itunes store. the problem seems fairly reccurrrent over all videos?

Accounts and entities do not match data in application OWNERSHIP

Dear experts,
During execution of the legal consolidation package we get the following error:
"Accounts and entities do not match data in application OWNERSHIP"
We have entered the ownership and transaction data.
Could you, please, help us to solve the problem?
Thanks.
Mila

This problem occurs when your Legal application is not in synch with your Ownership.
See below what you have to do to fix this problem.
I am considering you are using BPC for NETWEAVER.
If you are using BPC for Windows, then you gonna have to check some other properties too. ok?
Here we go.
LEGAL APPLICATION parameters must be setup in web, as follows:
ORG_ACCOUNTLIST = METHOD,PCON,POWN
ORG_ACCOUNTOWN = PGROUP
ORG_INTCO = I_NONE
ORG_OWNERSHIPCUBE = OWNERSHIP (or the name of your ownership InfoCube)
ORG_PARENTPROPERTY = PARENT_GROUP
OWNERSHIP_APP = OWNERSHIP (or the name of your ownership application)
USELIM = 1 (if you gonna use US elimination)
VALIDATIONS = 1 (if you gonna use "online" validations entered in Netweaver)
OWNERSHIP APPLICATION parameters must be setup in web, as follows:
ORG_ACCOUNTLIST = METHOD,PCON,POWN
ORG_ACCOUNTOWN = PGROUP
ORG_INTCO = I_NONE
ORG_OWNERSHIPCUBE = OWNERSHIP (or the name of your ownership InfoCube)
ORG_PARENTPROPERTY = PARENT_GROUP
OWNERSHIP_APP = OWNERSHIP (or the name of your ownership application)
After setup web parameters, go to BPC console and check the following dimensions:
(I am mentioning just the ones you need to setup for the consolidation)
C_ACCT
This is your account, and if you are using SAP ECC it should be equal to 0050 accounts of your GL (for example)
In this dimension, you must check the following properties:
ID - NEVER, I repeat NEVER, use lower case letters since BPC is case sensitive.
     ALWAYS USE UPPER CASE, FOR EXAMPLE, MY ACCOUNT ID'S ARE:   VLD_PL_INV,   VLD_PR_INV and so on.....
     This is valid for all dimensions or any other ID you gonna create in BPC.
RATETYPE - must setup and must be the ones you gonna use in your RATE application
DIMLIST2 - must use to GROUP your accounts for eliminations or any other automatic adjustment
C_CATEGORY
This is your consolidation categories used to link data you gonna load to your Legal InfoCube.
You must have C_100 for example, for your Actual Version.
You can use the ones that comes with APSHELL C_CATEGORY. It is fine.
C_DATASRC
This is just to TRACK your entries.
Create as many data sources you need and you gonna use.
You can use the ones that comes with APSHELL C_DATASRC. It is fine.
ATTENTION for the following properties:
DATASRC_TYPE - I for input (all the entries, transaction data from txt or ECC) and A for automatic adjustments
IS_CONSOL - Y means that ALL entries in the Legal infocube must be considered for consolidation
IS_CONVERTED - Y means that ALL entries in the Legal infocube must be converted to the GROUP for consolidation
DATASRC_STAGE = Y (allways Y)
ENTITY
ID and PARENTH1 must be entered and must reflect your company hierarchy.
INTCO - inform the associated Inter Company.
CURRENCY - You must inform the currency of the company otherwise IT IS NOT GONNA WORK.
           This currency ID must be setup IN ALL the currency dimensions.
In this entity you must enter:
1-All the companies
2-ALL TECHNICAL COMPANIES for the consolidation to work
3-ALL TECHNICAL COMPANIES for VALIDATIONS (if you gonna do you validations thru script logic to
have better control of accounts and values).
ATTENTION:
JUST FOR THE TECHNICAL COMPANIES FOR CONSOLIDATION YOU MUST INFORM Y   TO THE ELIM PROPERTY.
Leave it blank for all the other companies.
FLOW - you can use the one that comes with APSHELL
GROUPS
If your version of BPC is 7.0 than this dimension has two objectives.
First Objective - store all the currencies.
All you company data must be loaded with LC currency i.e. in the Legal InfoCube, you gonna see LC in the GROUPS column.
This is you Local Currency, so NEVER delete it.
These currencies must have the following properties setup:
REPORTING - Y for any other currency you insert, X for LC currency, X for Transction Currency.
CURRENCY_TYPE - R for reporting, L just for LC currency, T for the transaction Currency
Leave all the other properties blank!!!!
Edited by: JADIRM on Nov 7, 2010 3:23 AM

Monitor and printer colours not matching!

Similar Messages

Maybe you are looking for