24bit/96kHz Support?

Does the iPhone support 24bit/96kHz encoded songs? I have some really great sounding jazz records that are encoded in this format but every time I try to transfer the song over, it gives me an error that says that the iPhone doesn't support it. I do not wish to convert it to another format for that will degrade the sound quality and possibly the bit depth.
Any ideas for work arounds?

Since discovering 24bit music a few months ago I've been experimenting a bit, including iPod playback. I've stumbled on this thread, and here are some thoughts:
Can an iPod play 24bit FLACs? --no, but my 2nd generation iPod Touch can play 24bit Apple Lossless files. If you have FLAC files, you can convert them using a really nice utility called X Lossless Decoder (XLD) which makes bit perfect conversions from FLAC to Apple Lossless and back again. You can download from here --> http://tmkk.hp.infoseek.co.jp/xld/index_e.html
Can an iPod play 24bit/96KHz Apple Lossless file? --no, apparently not (at least mine can't) which is something I discovered by accident. It turns out my first 24bit music had a sampling rate of 48KHz, so my iPod swallowed it and played it no problem. Then I got hold of a 24bit/96KHz file and was surprised when iTunes told me that my iPod couldn't play this type of file. The answer is to use XLD to down-sample the 96KHz file to a 48KHz file, and use that copy on your iPod. The full fat 96KHz files play fine in iTunes on your Mac, though, so don't discard them.
Why do I downsample to 48KHz and not 44.1? -- think about it: 48 is half of 96, and 44.1 is not. Half the sampling rate means that (thinking about it in movie terms) every other frame is used without any interpolation (and therefore further degredation) of the original. I have seen 24bit/88.2KHz studio master files for sale on some audiophile websites. I haven't tried one yet, so I don't know if these work on an iPod without down-sampling, but again, the answer for me will be to down-sample to 44.1KHz and not 48KHz.
Does it sound better? --oh yes! The first bit of 24bit music I got was a free download 24bit version of a CD I bought. Naturally the first thing I did was to listen to the same bits of music back to back in both losslessly ripped CD (16bit/44.1KHz) and 24bit/48KHz and the difference is astonishing. The first impression is that the 24bit version is less bright than the 16bit version, but very quickly I realised that was because the music had lost that hard digital edge I'd got used to after years of ignoring vinyl for the convenience of CDs. Then I started to notice the extra detail. In one bit of music, the CD version had a vague background huffing noise I couldn't identify except to say it was a bit of studio background noise. On the 24bit version it's unmistakably the depress-release of a piano's sustain pedal. All kinds of detail in the music has become apparent sicne then.
OK, so does it sound better on an iPod? --absolutely! 24 bit sound is vastly better than anything you've heard on an iPod but you've got to upgrade your iPod a little. The player itself is really very good and worth every penny and then some. The negative value left over is in those tinny little headphones Apple insist on supplying, which for years, and through various generations of iPod/Phone I've owned have gone in the bin without even being unwrapped. Hateful things they are -- just get rid of them! Right now I use Shure SE-530 in-ear headphones, which were very good anyway, but since my discovery of 24bit music have really come into their own. These are expensive though, at roughly twice the price of your average iPod, but there are definitely cheaper alternatives that will massively improve your listening experience. The key is to isolate as much noise as possible (isolate, not "noise-cancel" which in my experience doesn anything but that) so if you don't like stuff shoved into your ear canal, a decent quality chunky pair of retro style big ear pad headphones would serve you well I reckon.
What else have I tried? --well, I've discovered that 24bit files made from vinyl originals sould a lot like vinyl originals in both good and bad ways. The characteristic vinyl rumble and crackle is faithfully preserved in 24bit/96KHz form... Secondly, 24bit files ripped from a digital source such as SACD or DVD-A sound amazing. Thirdly, AAC (which is NOT AT ALL LOSSLESS) is far worse than a losslessly ripped CD, so STOP PAYING APPLE FULL PRICE FOR A LOSSY FILE IN THE iTUNES STORE. Whilst I love Apple, this is one area where they are pulling a fast one on all of us. Tell them it's unacceptable, and go back to buying CDs from Amazon until they at least give us the option to buy lossless versions of the music. Finally, MP3 files (God help your ears if you still have some of those) are vastly worse even than AAC files. Lossy compression is bad, and old style lossy compression is the worst of all.
What do I still want to know? --lots of stuff generally, but in relation to this, here are a some questions that still bug me:
* why don't record companies make 24bit music more widely available? Why are we confined to very obscure music offered only on specialist audiophile websites? SACDs and DVD-As are out there, and most self-respecting recording studios these days oftem make 24bit/192KHz masters. Why make the best thing generally available for us to listen to down-sampled and degraded 16bit/44.1KHz versions on a more than 3-decade old physical format? (Answers to this question that involve the word "copyright" will be redirected to /dev/null by the way, on the grounds that they are very boring indeed)
* what is the highest spec Apple Lossless file that an iPod will play? So far I know only that 24bit/44.1KHz and 24bit/48KHz work, and one of these days when I have time, I'll down-sample a 24bit/96KHz file to 24bit/72KHz and 24bit/88.2KHz and see where iTunes stops uploading it to my iPod. If and when I know, I'll let you know.
* why don't Apple publish a proper specification of what kind of Apple Lossless file any given iPod model will play? The second I see "Apple Lossless up to 24bit/96KHz" or better I'll upgrade -- Apple, that's a promise.

Similar Messages

  • Does Audigy 2 NX support 24bit+96KHz SPDIF out

    I could not find a manual for this device and I could not find a final answer here in the Forum, so I am asking the question here:
    I know the Audigy 2 NX has got SPDIF output that supports AC3 and DTS but does it also supports this with the maximum 24bit+96KHz resolution?
    Thanks for your help.
    Regards,
    MennoMessage Edited by Menno4770 on 09-30-2006 2:20 PM

    http://www.creative.com/products/product.asp?category=&subcategory=205&product=903& nav=
    If I read those pages right, only input (S/PDIF @ 24-bit/96 kHz).
    jutapaMessage Edited by jutapa on 09-30-2006 0:58 PM

  • ITunes 9 can no longer encode '24bit 96khz wav' to 'iTunes plus aac'

    In iTunes 8.2.1, on a G5 PPC running Leopard, if I try to convert a '24bit 96khz wav' file to 'iTunes plus aac' via iTunes, everything works fine.
    However, I cannot convert this same file using iTunes 9. It gives me an error saying something like 'file cannot be converted using current iTunes encoding and bit rate'. I tried a bunch of other iTunes encoding settings to see if I could encode the file with any others, and I couldn't get any to work.
    I then downgraded back to iTunes 8.2.1, and I could then encode the file as aac.
    Is this a bug, or did we lose a really cool iTunes feature when transitioning from 8.2.1 to 9?
    Thanks,
    -Clayton

    I got tired of waiting for Apple to provide support for this in iTunes 9, like they previously had in iTunes 8, so I gave up on waiting.
    I'm using Sample Manager and a bit of AppleScripting to pre-process my upsampled audio, and get it down to 16/44.1 wav, before asking iTunes to convert it to AAC and add it to my library.
    Not so happy with Apple on this one... but I get it, I'm in a small demographic... people that have upsampled audio that want an AAC copy in their iTunes library... so I'm OK with it...
    I just wish that someone from Apple would have at least acknowledged this post, and admitted that they dropped support for this when moving to 9, and that they have no intention of supporting it at the current moment...
    -Clayton

  • Exporting 24bit/96kHz audio from CS5.5 for SD DVD?

    Hi, I'm trying to export a timeline with 24bit/96kHz for encoding to SD DVD. Using AME to encode before importing assets into Encore, I see nothing but 48kHz. Ditto for BRD export. Is that normal? I do have a Matrox MXO2 mini installed which does not support 96kHz but I started a new, non-Matrox project and exported the project into that and deleted render files and re-rendered. Same thing: no 96kHz audio encode option.  Yet, even SD DVD has always supported 96kHz audio.
    It doesn't even look like AME allows exporting an "audio only" file with 96kHz that is compatible with DVD.
    DVD supports uncompressed PCM audio but alas my total exportable file size would be just under 9GB and dual layer DVD supports 8.5GB so it's too big a file to do that. And when I imported the whole timeline (vid+aud) into Encore using Bridge, it shows the Audio as "Untranscoded" which I assume means Encore will definitely transcode it. Note: I imported the timeline into Encore using Bridge and then separately imported an MPEG-2 DVD transcode done in AME and then deleted its audio file and replaced it with previously "Bridge-transferred" timeline. So, Encore timeline consists of an AME encoded video track and an uncompressed audio portion of the Premiere timeline. But again, I assume that even if the estimated resulting file size was not too big, Encore would still encode the audio track. (Encore shows the video as "Don't Transcode" because I already encoded it wity AME.
    Is there anyway on Earth to use Adobe CS5.5 suite to make a DVD with 96kHz audio?
    Thanks for any help from people who have actual experience and insight on doing this. Speculation is not what I'm after. Surely someone around here has made a DVD with 24bit/96kHz audio. I recorded a symphony orchestra with a Sound Devices 788T in BWF at above spec and my exec produder wants to hear my audio on his audiophile system with tubes and really expensive speakers. I do too. This is lame if I cannot.  
    Thanks! 

    Hi Jeff,
    Thanks for your valuable insight on all of this and your testing. I get your point re me being in the minority. However I still doubt this a case of being on the bleeding edge of technology and notwithstanding that the files are huge, it has been part of the spec. If Adobe allows 24/96 in various other encoding output options then I feel it should for DVD, and certainly should for BDR. I suspect all BDR players support it. 
    For the 15 years I've been in this biz, my work has been coprporate - as is the fundraising video I produced for the symphony. Since one rarely (if ever) gets a chance to record symphony orchestras and my 788T allowed it, I logically chose 24/96. I guess I need to research the optional Dolby Digital or MPEG encoding of audio for this kind of programming (never used or needed it since no corporate accounts ever complained about the stereo PCM audio.)
    Very interesting re i7+GPU acceleration being faster than Max encoding. Please tell me where you got that info. I assume there's been reliable testing. I know one thing: Max doesn't heat up my CPU and GPU. I currently have an i7 980 hex core with a GTX470. (as I understand it, GTX is fine for Premiere editing; Quadro isn't really needed unless doing heavy graphics in After Effects).
    Here's one for you that you may not already know: according to Adobe's own site, you need an approved GPU card with SDI out in order to take full advantage of what it calls "Graphics for Video" output (I think it's supposed to reduce latency issues with output to an external monitor.
    Nvidia now has a special plugin to properly allow Mercury Transport passthru.  BMD, for example, is now claiming that their devices allow Mercury Transmit passthru but says nothing re needing an approved card with SDI out and the special plugin to make it work. I understand that even without SDI out, one does get external monitoring without using a Matrox or other third-party i/o box. When I call Matrox or BMD they know nothing. Ditto for the NVidia guy I spoke to.
    I've been planning my new budget to include an HP Dreamcolor monitor but that doesn't have SDI in. MOTU said that their device with SDI-in does output RGB via its HDMI or component out. (Dreamcolor requires RGB signal).
    I've always used Canopus, Matrox or BMD but now I'd like to get away away from these third-party i/o solutions due to being troublesome with buggy drivers just adding more complexity and complications than they're worth. If Nvidia offers SDI out and, by nature, the output is RGB, and I find a monitor that has SDI but doesn't cost a fortune. (currently using a Sony LMD2030W production monitor), why do I need a third-party i/o solution? (other than if I want 96kHz).
    I welcome any further insights you have these third-pary devices becoming obsolete re your comment above re Max encoding not being as fast i7-GPU acceleration. As well as anything I'm positing.
    Thanks again, Jeff!
    w smith  

  • Any audiophiles in the house? 24bit 96KHz audio and up!

    I don't mean you twiddle knobs either...  :wink:
    I've been looking into replacing my CD player and in fact my whole hi-fi system. My wife says it is ugly (because it's all racked, black, bachelor pad stuff). It will break my heart to get rid of my fabulous Audiolab amp and my AE109 speakers but the CD player is barely used and the tuner has already been removed...
    Anyway, I've been investigating high resolution audio files. These are higher bitrate and higher sample rate than CDs and as such offer the prospect of higher quality sound. As an experiment I downloaded an album I already own on CD at 24bit 96Khz then ripped the CD into iTunes as an Apple Lossless file. Because iTunes doesn't support FLAC files I had to use XLD to convert them into Apple Lossless files and then imported these into iTunes.
    So playing them back-to-back in iTunes there is a massive difference in sound quality.
    Since then I have learnt that iTunes won't play anything higher quality than 16 bit 44.1KHz and automatically downsamples anything higher. To get around this the settings can be adjusted for high resolution using Audio MIDI Setup. I have now done this and reimported the two pairs of files. Now the sound quality is even better.
    However, it is all let down by the speakers I use with my iMac. These are Harmon Kardon Soundsticks and the matching sub-woofer. These are connected via USB. Fortunately the iMac has a digital output so I could use a Toslink cable to connect these to some powered speakers such as these...
    http://www.avihifi.co.uk/adm9.html
    However they are mega bucks and really too big for my desk. Then I started thinking these could work in my lounge on suitable stands and if I could find a way of playing my hi-res files downstairs then I could lose the whole hi-fi system and replace it just with these powered speakers.
    That opens another can of worms. Up to now I've used an Apple TV downstairs wired to my hi-fi to play digital files. I transfer them from the iMac via ethernet using a pair of those adaptor things that distribute internet using the mains circuit. That all works well except the Apple TV does not output files of higher quality than - you guessed it - 16 bit 44.1KHz.
    So I have two questions...
    Does anyone know of any good quality, low-cost, Toslink enabled active speakers for use with my iMac and second, is there a way of transferring and playing the high res files through a Toslink enabled, Mac compatible server. If so which one?
    And finally has anyone got the AVI active speakers I provided the link to and if so what do you think of them?
    Thanks,
    Rich

    The ATV supports 24bit 48kHz, which sounds MUCH better than 16/44. Unless you have a very serious—deep-6-figure-cost—listening room, the bit depth is what's going to make the difference.
    I'd consider myself an extraordinarily picky audiophile, but in the theater—and especially in the living room—the difference between 96khz and 48khz (or 88.2 and 44.1) on 24bit files is negligable.
    Try 24/48 files on the ATV...the bit depth is the key to the quality...very few speakers in the sub-5-figure range are responsive/detailed enough to get anything out of 96k samples they're not getting out of 48k when they're already working with 24bit information.

  • Can Itunes Import & play 24bit 96khz music files?

    Hi there if i imported some 24bit 96khz music files into Itunes will the files remain this format or will Itunes compress them?
    Also is my Ipad/Iphone able to play 24bit 96khz files or not?

    With the Apple Lightning CCK and iPhone 5 /IOS6 it seems to be okay to play flac format with soft Ampliflac.
    However with IOS7 Apple has blocked the way ! it's terrible, Apple Lightning CCK doesn't work, see
    http://www.pricegrabber.com/electronics/portable-device-accessories++flystone-fl ystone-lightning-8-pin-2-in-1-cf-card-reader-camera-connect/m-1246673114/#_produ ct_details
    Regarding iTunes, it can play your slamping, in case you put the setting in the right one
    I can't understand Apple that block these right slampings under powerful devices like 5S... I know they can't sell very heavy files in density buisness but it's always nice to be free to play what we naturaly like !

  • HT1515 Is it possible to stream music in 24bit 96kHz or does it only support 16bit 44.1kHz ?

    I would like to know what is the maximum capbilities of "airtune" to steam music via Airport Express.
    What kind of DAC is inside Aiport Express? Is the optical output able to steam music in 24bit?

    Hockeyfanatic wrote:
    Does anyone know how or if it's possible to stream my music from the iPhone to iTunes via bluetooth or wifi? Essentially I want to share the iPhone's library with iTunes (I know one can go the other way).
    Here's why: I'd like to stream my music at work to my computer's speakers without taking the phone out of my pocket. I obviously don't have my home music collection on my company computer. And I figure if I place the phone on my desk to plug it in and play through iTunes, I could easily walk off without the phone. That would be bad (out of contact) and potentially sad (stolen).
    It seems right now the only bluetooth connection to a computer is for the remote application.
    Wait until November. Airplay/Airtunes iOS 4.2 announced for iPhone to iTunes/iTV. If you want a BT audio stream now, you can add a dongle to the PC for headset streaming.
    As far as WiFi file transfer iPhone to iTunes, you can't. There's talks on it but nothing concrete. Except JB.

  • How to create a wav file from 24bit 96Khz sampling rate data

    Hi
    I am trying to make an VI which will play sound while acquiring data from PXI 4472 DAQ card.
    My sampling rate is 96Khz and PXI 4472 card is a 24bit card.
    Wave files are in 8 or 16 bit and the sampling rate is 8000, 11025, 22050 and 44100. How will I be able to play the data which I am acquiring.
    How would i normalize the data into the required format needed for most of the sound cards to play.
    Or are there any codec available in Windows XP which i call to play a 96KHz 24 bit sample
    Does anybody ever encountered this type of problem.
    Thanks in advance
    Nitin

    Whilst the 'standard' RIFF format specification usually accomodates 16 bit data, there is of course no reason that you can not create your own extension. It just won't be playable by Media player using the 'standard' installed drivers or codec. This may not be a problem....
    WAV files can and do support other formats, you just need to know how to handle them......
    There is howerver a 4GB limit (related to the pointer size in the WAV specification) which with higher bit depths on the sampling does start to become a bit of a problem.
    To give you a few samples of other types of wav files check out the following site here
    http://www-mmsp.ece.mcgill.ca/Documents/AudioFormats/WAVE/Samples.html
    The following definitions for WAV audio formats may also be of interest here
    http://www-mmsp.ece.mcgill.ca/Documents/AudioFormats/WAVE/WAVE.html
    Good luck with 24 bits.

  • Does the SB Live! 24bit External support AC3 and DTS pass-throuht on its SPDIF interfac

    I know this card does not support hardware decode of AC3 & DTS, but does it has the capability to pass throuht the AC3/DTS signal to a external home theatre system ? Or only support PCM signal on it ?
    Thanks,

    Thannks for your reply. The problem occurs when trying to play DTS audio CD, not DVD Audio. I've tried to play DTS audio both from the original DTS audio CD and from saved to the hard disk DTS audio tracks. In both cases the players ( Media Player Classic, WinDVD6, PowerDVD, JetAudio ) are configured to use S/PDIF, and the result is either noise or silence. When a player able to decode DTS is configured to play through soundcard's speakers then the sound is decoded and sent to the receiver as PCM and played as stereo. I would like to use the AV-Recei'ver as decoder and amplifier ( not only amplifier ), because of two reasons:. The?signal sent to the receiver as DTS audio is decoded and played as 5. channel audio. This is? exactly the same as playing DTS audio CD on the conventional DVD Player, connected to the AV receiver?through?the digital output. 2. The quality of the AV-Recei'ver is greater than the quality of the SondBlaster Li've! 24bit External, so it's much better to send digital signal to the receiver and leave it to decode, convert to analog and amplify the sound signal. The most interesting thing is that the same configuration containing?the software player, the SB Li've! and the AV Recei'ver connected through the S/PDIF recognizes, decodes and plays correctly the DTS/DD sound of DVD-Video titles played on the computer ... !?! :smileysurprised:

  • How to Create a Custom Color Chooser/Palette with 16 or 24bit Color Support

    Hi All,
    I need some help on how to create a color palette/chooser with 16 bit or 24 bit color options available
    First setting up the context:
    I am developing an application which allows designing some GUI screens by adding various controls.
    Now these GUI Screens developed are compiled and downloaded into a series of display devices with each device having a different color support (For e.g. 256 colors, 16 bit, 24 bit and 32 bit).
    Now according to the selected device i would need to provide the "Color Chooser" with only those colors that are supported by the device. SO I need to design a Color Palette(s)/Chooser(s) with 16 bit, 24 bit or 32 bit color options
    Could anyone help me out on how to create such palette? A piece of sample code would be a great help
    Best Regards

    It is not that simple... reason I almost never use those old captions anymore but replaced them by shapes (much easier to format).
    Have a look at the available captions: for each caption you'll need a bmp and a fcm file, and follow naming conventions. See:
    http://helpx.adobe.com/captivate/using/text-captions.html#creating_custom_text_caption_sty les

  • Audigy 2 ZS 24-bit/96kHz Recording support

    Hi
    According to Creative's website,on Feb 2004,
    only SBAudigy2Plat.Pro had --> ASIO 2.0 Low Latency Multi-Track Recording Support (24-bit/96kHz)
    See http://web.archi've.org/web/2004028023909/http://www.soundblaster.com/products/Audigy2ZS_platinum_pro/compare.asp
    But now, after Audigy4's release, the website's comparision chart shows all the members of the Audigy2 family can do 24bit/96kHz ASIO 2.0 Recording.
    See:
    http://www.soundblaster.com/products/Audigy2ZS_platinum_pro/compare.asp
    Please clarify this ?
    Were any new driver released by Creative to add support for 'ASIO 2.0 Low Latency Multi-Track Recording(24-bit/96kHz)'
    for Audigy 2 ZS, as well as Audigy 2 ZS Platinum ?

    -Q,
    This has been added to the drivers. Make sure you are running the latest drivers and this should update you to ASIO 2.
    Jeremy

  • Soundblaster LIve! 24bit card, weak output to existing speakers with lots of hi

    Moved a working Card and speaker pair from an older Dell to an HP Pavilion xt963 and installed the drivers and plugged the speakers in. Using windows Media Player, all I get is hiss and very faint music out the speakers
    Windows version XT with SP2. Tried driver from CD and downloads from m Creative.
    I have performed all the standard diagnostics and checks I have been told to do in the support software. NADA, zilch, bupkes!

    leekh wrote:
    hi! is it true that the sound blaster li've 24bit can only output high resolution 24bit/96khz audio via spdif whereas the analog output is only limited to 6bit/48khz? :smileysurprised:
    Li've! 24-bit has been reported to have problems to record 24-bit/96 kHz (as it should be able).
    Can't answer your quesion but here are Li've! 24-bit tech. specs:
    Creative wrote:
    High Definition Audio Quality
    * 64 audio channel playback with independent sample rates
    * 24-bit Analog-to-Digital conversion of analog inputs at 96kHz sample rate
    * 24-bit Digital-to-Analog conversion of digital sources at 96kHz to analog 5. speaker output
    * 6-bit and 24-bit recording with sampling rates of 8, .025, 6, 22.05, 24, 32, 44., 48 and 96kHz
    * SPDIF output up to 24-bit resolution at selectable sampling rate of 44., 48 or 96kHz
    EAX? ADVANCED HD? Audio Technology
    * User-selectable EAX ADVANCED HD MUSIC presets, pre-configurable DSP modes simulating various acoustic environments
    * Optimized settings for headphones, stereo, 4., 5., 6. or 7. speakers
    * Creative Multi-Speaker Surround? (CMSS?) technology transforms all stereo audio into 7. multi-channel playback
    jutapa

  • Bit Depth & Sample Rate: 24 bit 96kHz? 192kHz?

    I am using the Apogee Duet for Mac and iOS on my Mac and I love it - I'm thinking about getting an iPad for mobile recording (voice overs, mostly) and I wonder if Garage Band can manage 24 bit audio at 96 kHz or 192 kHz? I know that the Auria app can, so if nothing else I can just buy that, but since all I would use the iPad for is Voice Overs to edit later in a computer, a $50 app feels like overkill. Comments? Thoughts? Specs?

    Well, I am new to high-end sound cards, and I may be misinterpreting the terminology, but the sound card is supposed to be a 24bit/96kHz card.
    I am under the impression that one should be able to set the output quality of the card to 24bits of depth and a 96kHz sample rate, despite the speaker setting that one may be using, to decode good quality audio streams (say an audio cd or the dolby digital audio of a dvd movie.) I can currently achieve this only on 2. speaker systems (or when i set the speaker setting of the card to 2.) Otherwise the maximum bit depth/sample rate I can set the card output to is a sample rate of 48kHz and a bit depth of 6bits.
    Am I mistaken in thinking that if I am playing a good quality audio stream I should be able to raise the output quality of the card to that which it is advertised and claims to have?
    Thnx

  • 24BIT AUDIO NOISE QUIRK IN PREMIERE

    Hi to All!
    For quite some while we struggle with a strange audio problem in Premiere CS 3 - 6.
    What we experience is that when we export a 24 or 32 bit (48 / 96 kHz) clean audio track from (Avid)/Protools then we suddenly hear audible noise in the audio track in Premiere. It is not drastic but still noticeable.
    So:
    Protools (24bit/96kHz)     =>     Premiere CS3-6     =     noise
    Premiere CS3-6 (audio track)     =>     Protools       =      okay
    When we look on internet then nobody seems to pick up on this. Which is strange because we get this on several videosets. As a result we stopped working with 24 bit files towards Premiere.
    When we do an export the noise is part of the exported file.
    OUR EQUIPMENT:
    What have all our sets in common.
    We always use MasterCollection 3 - 6 (recently only 6)
    We have i7 processors Windows 7 machines, with current updates from the OS and Adobe.
    We have current updates from Quicktime.
    All machines have Blackmagic hardware types (varies from Video shuttle  to a  3D Card)
    All machines have Protools hardware (varies from Mbox - Digi002)
    We experience the noise while using the Blackmagic hardware. The noise is comparable with the effect when you would use an old tapemachine without Dolby and play it back from the tape. (SR noise ratio +- 60dB). The noise that you hear is very comparable with the effect what we experience on our machines when playing back 24bit files. It is very noticeable on voice only. When using music files this normally masks the problem.
    I hope someone identifies with this quirk. I would very much apreciate this.
    Regards,
    Kai

    Figured it out!
    The sequence settings were'nt set up in a XDCam Format.
    Audio sounds clean now.
    Cheers.

  • Aud 2 NX - Cant Select 96Khz Sampling Rate/Dolby Digital Light doesn't Illuminate when playing DV

    Hi,
    I'm running a Audigy 2 NX (USB) on a Toshiba 240-504 Notebook through the rear USB port, the speakers I am running are Logitech X530's (A bargain if you can get them, but that's beside the point =])
    I cannot select 24Bit/96Khz from the Device Control applet, I should be able to. All I can select is 24bit/48Khz.
    Also, when I'm playing Dolby Digital content such as a DVD through PowerDVD, the Dolby Digital light on the card does not illuminate, is this expected behaviour? The light Illuminates if I use the product showcase demo cd though, by the way. Also, slightly off topic, does anyone know what settings I should be using for PowerDVD? Is CLMEI-2 ok?
    I will post anymore information you need to know at request. Thanks very much for your time reading this.

    th0r0n,
    Are your notebook using USB2.0 as those options are only available if you are using USB2.0. There's a chart in the manual also that shows these. Also, the Audigy 2 NX dolby indicator will only light up if it's decoding AC3 material. If you are using PowerDVD, you will need to config PowerDVD to use SPDIF and passthrough the AC3 signal to the sound card for decoding.
    Jason

Maybe you are looking for

  • Windows Update fails on Server 2012 R2 Virtual Machine

    I have set up a virtual network with two virtual machines. The first VM is Server 2008 R2 and is set up as a domain controller. The second VM is Server 2012 R2, and has been joined to the domain.  The DC (TestVM1) is also set up as a DNS server.  Fro

  • Waves 5.9.7- Finally Working in FCP!

    The folks at Waves must have finally got their act together. The age old problem of Waves Audio Units not working in FCP seems to be over. After installing the update, I crossed my fingers and launched FCP 6.0.1 and voila, no crash! It's not that I e

  • Switching from pc format to mac format

    i recently bought a macbook and started using my video ipod on the mac. wheni downloaded movies from the itunes store it said that the vio could not be put on my ipod because it needed to be updated. when i tried to update it it said only macintosh f

  • Radeon X800XT...problem

    I've had this card for a few months. When I first installed it, there were some problems with the image on the monitor: one of my monitors is too dark (I had to raise the brightness up all the way and it's still too dark), and the colors on both moni

  • My Skype used to have surround sound and now it do...

    I was talking to my mate on skype when suddenly my computer switched off. When i turned it back on and called my mate on skype his voice wasn't surround sound anymore.  I checked everything. Everything else is surround sound but only his voice isn't,