2nd gen A TV I can hear but not see when trying to stream from the iPad2, 2nd gen A TV I can hear but not see when trying to stream from the iPad2
2nd gen A TV I can hear but not see on the TV when trying to stream TV from the iPad
What are you trying to stream? Some websites have not enabled the video part of airplay... BBC iplayer for example.
Similar Messages
-
I notice that my new IPad (3rd generation) will not stay connected to the power cord at all, I'm not exagerating, if I plug it in and browse the Internet without fail it will become unplugged and I will have to push the plug back in (Ba-beep). Ive actually grown to despise that sound when you plug your iPhone or iPad in because it reminds me of how much money I spent on something that PHYSICALLY will not charge while I'm using it.
I know the problem with it holding a charge while in use, I get it, the screen is amazing and it takes a lot to run the display, however, it is unacceptable to me that I can't even keep the thing plugged in while I'm using it. I can not even leave it on my Cal King bed overnight because I will wake up in the morning to find that the plug has been jiggled loose in a corner, so it's still attached but not making a connection thus not being charged.
I love the 4GLTE from Verizon and I love the iPad, but I'm actually using my 1st generation IPad while I am at home so I can leave my new $900 iPad on a table to charge free of incident so I can use the 4G while I'm away from wifi during the day. I have been getting more upset about this because I can not even use the Griffin extended cord to charge the iPad and be far from the plug because only the original apple sync/charge cord will have a better shot at staying in. Absolutely none of my non apple cables will stay in the iPad 3 while having it in my hands.
The plug is at an angle, unlike the first iPad, not sure about the iPad 2. Please let me know if they have same issue.
If anyone else is having this problem with the Gen 3 iPad please let me know because I'm tempted to do something about it with apple and I'm hoping that I just for some reason have a bad cable receiver or something and maybe I can get a replacement and enjoy the iPad as I had expected to. There is no reason why I should be even using my first iPad and I have friends that want to buy it but I am not selling it because I'm unable to sell it because I can't handle the new iPad while it's plugged in, that is ridiculous if it's a common issue so please let me know!Thanks for the swift reply, I have been looking online and a loose plug seems to be somewhat of an issue with many, I hope mine is actually a problem and not what others are experiencing. It's taken me this long to even reach out for the simple fact I HATE being a complainer but this is just horrible.
Do you have an iPad 3 as well? And is yours not experiencing any issues close to mine?
Thanks again! -
I get the feeling some has asked a question "like" this but not exactly that question which makes it really hard for find answers fast to the above question. Therefore, I decided to ask it anyway. Hopefully someone has a good solution that will work.
Background on the question:
- I had to erase and reupload song on my ipod 1st gen to my new computer. Apparently the ipod could not be read by the iTunes in my new computer because the playlist cannot be opened in more than one iTunes or in another computer or something like that (this makes no sense). All this was to try and charge my ipod that does not seem to want to charge. It connects perfectly to the computer and I can see the initial blinking yellow lights on the back and front, but won't charge. I am currently working on this problem from other community discussion topics.Sync works the same way it always has, connect the device, select the content desired to sync and sync.
All the media should be in iTunes already, iDevices are not and have never been backup devices.
If this is a new computer, move the content from the old computer to the new computer. -
Hi, I’ve recently bought an iPad2 and can’t get connected with AppStore or iTunes, when I tap on these icons a grey page pops up saying is loading but never opens the page, no failure message is displayed, it just keep saying is loading.
Apparently it is not an issue with wifi since Safari, You Tube and Maps work well, I’ve tried some of the tips, e.g. log off/on my Id, change password but no one worked.
Your help will be highly appreciated.
Thank you.
Luis.Try a reset. Hold the Sleep and Home button down for about 10 seconds until you see the Apple logo. Ignore the red slider.
-
Im trying to use my apple TV to see a movie from my iphone. Since i select the airplay icon on my phone, i can only hear the voice of the movie on my screen but i cant see the movie, can anybody help me pls? Tks
Is this a movie from iTunes? If so is it a rental or one you've purchased?
-
My iMac won't start up, or wake from sleep. I've tried everything, except for reinstalling the SO-DIMM memory modules. Still, my iMac will not wake up. Turning it on, you can hear the fan run, but the display stays dark. Any ideas what to do? Thanks!
Mac doesn't boot
Can you hear the fans and hard drive and see the white boot screen? Flashing question mark? The circle just runs and nothing happens? Only black screen and nothing else? These can be very helpful to diagnose the source of the problem. [1]
Flashing question mark [2]: This is usually a sign of a failed hard drive. This indicates that boot up volume can not be found.
Black screen: This is usually a sign of a failed logic board. There is no single reason for this and this may be caused by failed GPU, screen, CPU or RAM.
Circle of death/no circle/blue screen: This is usually a sign of a hard drive failure. This may NOT be a dead hard drive, just broken permissions or something
Gray screen/Apple logo/spinning gear or globe/prohibitory sign/folder with flashing question mark [3]: This could be a sign of faulty hardware but more likely a software issue, i.e. broken permissions, failed software update, etc.
[edit]
What to do
First, hold down the option key (also known as the alt key) just after you've pressed the power button. This should show all the available options to boot from, so if you have Windows installed through Bootcamp or a disk in your SuperDrive, you should be able to see them along with your OS X drive/partition. Select the OS X partition with arrow keys and press enter. Startup key combinations
If that doesn't help continue doing the steps from below:
1. SMC reset [4]. Shut down and unplug all cables including power cord for at least 30 seconds and then plug in power cord and keyboard/mouse.
2. PRAM reset [5]. Hold down option, command, P and R while booting. Start it when you hear the sound and don't let go before it reboots.
3. Safe boot [6]. Hold down shift while booting to boot into safe mode. If this works, open Disk Utility from Utilities and repair your permissions and verify the disk
4. Hardware test [7]. Insert the install disk (disk 1 in Mac which shipped with OS X 10.5.4 or earlier, disk 2 if shipped with OS X 10.5.5 or newer) and hold down "D" before the grey boot screen opens. Follow on screen instructions
5. Boot from install disk. Boot from the disk that came with your Mac. Hold C while booting. Select Disk Utility from top bar and repair permissions and verify the disk. Reboot normally and see if it works now.
6. Boot from another Mac (Firewire target disk mode). Connect the machines with a Firewire cable. Power on your Mac and press T. Select the other Mac's hard drive. Download the current OS X combo update. Run the combo update installer and select the drive that won't boot as the destination.
7. "Repair" OS X. Boot from the install disk as in point 5. and reinstall OS X. This should NOT erase any data, just replaces the system files which may have caused your booting problem. Now install the latest combo update for OS X and repair permissions on your drive with Disk Utility.
7.1. Install OS X into an external hard drive and then boot from it [8] and try to copy your data from the hard drive before proceeding. If you have done a backup recently, you don't have to do this.
8. Restore OS X from Time Machine backup. Boot from the disk that came with your Mac and choose the Time Machine restore option. This step will lose any changes made since your last backup but the system and your data will be put back to exactly as it was on that date.
8.1 Reinstall OS X. Boot from the install disk as in point 5. and select Disk Utility again. Now erase the whole hard drive and install OS X again. If you had a Time Machine backup and step 7 worked you don't have to do this. -
all data and messaging works on my note 4, but last night the cellular phone service just went dead. I can call people but the line is just silent, and people can call me, it rings, but I can't hear them. ????? What is wrong with it???? How do I fix it????
You aren't attached to a bluetooth headset or other device for some strange reason? Or even an automobile bluetooth, I have a friend that has this issue with his Prius because even when it is not running the bluetooth is still active and connects to his phone.
-
Just tried to place a call with my new iPhone. I can hear the person I'm calling but they cannot hear me. There is a line across the microphone icon, which I took to mean muted but nothing changes when I tap it. What am I doing - or not doing?
is your mute switch turned on (above the volume) ? remove case and screen protecter.
is volume turned up?
if so do this
account security
Please call apple @ 1-800-692-7753 in USA
ask for the account security team
you may want to add a credit card to your iTunes account before calling; so they will have a way to verify your identity.
Peace, Clyde
check # for your country
http://support.apple.com/kb/HE57
<Edited by Host> -
Today , I submitted my subscription to PC Magazine with one-month subcription by my ipad2 . The purchase has done & show the bill in my itune. But I always can't download content . I tried to unistall PC magazine APP and reinstall it , Reboot my iPad2 ...etc. But the issue is still happened . How can I let PC magazine refund my subscription fee ? Does anyone have such download problem ? I think it should be a problem with PC magazine's APP .
B.R. Tommy
[email protected]
Cell : +886-919-205830I'm so stupid... I should've thought about iptables... I'm reconfiguring them now, thank you very much!
-
I am trying to update my billing detail on my IPAD2. However it keep on saying that the country need at least 3 characters long. But the country field is a dropdown list with Malaysia's states all with 2 characters long only! I can't make any purchase now because I can't verify the billing detail because it just doesn't work! Very frustrating now.
Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact -
I was told I could sync my music on my pc with my ipad2 by an apple agent. I hooked my ipad2 up to my pc and did so, but now I can not open any of my apps on my ipad2. when I try it just flickers and does not open. Can anyone help?
On you iPad, force close all the Apps in the multitask window.
Follow these steps to force an app to close:
From the Home screen, click the Home button twice.
Tap and hold on the app.
When it starts to jiggle, tap the to close it on by one until all cleared
Now do a Soft reset of your iPad:
Hold both Home and Sleep button for around 10secs until you see the Apple logo then release. After it returns to Home screen, try your Apps again and see if this resolves the issue. -
when I'm watching a You Tube Video, i go to full screen on the video , and it scrambled.. I hear the music, but loose the video..can someone help me???
== URL of affected sites ==
http://www.youtube.com/John0618. Did you ever get a response or solution to problem? I have the same problem (starting about three months ago).
-
when trying to make calls the timer starts counting as if i am connected but i can't hear anything and my speaker button has turned blue
Did you use the latest backup after setting it up "as new device"? If yes, try again, this time without using the backup, maybe it contains damaged data causing your problem.
If this does not bring any change, you should get it serviced. -
Hi i have an iphone 4 ive replaced the earpiece as i thought it might be that but its no different. If i ring a friend they can hear me but i cant hear them unless i put my fone on loudspeaker please help
Assuming you mean that you opened the phone and replaced something inside, there's not much anyone here can recommend.
Find a competent repair shop or buy a new phone. Apple won't touch that one now. -
when watching a slideshow I could always access music from my iTunes folder. Suddenly today I can only hear music under the 'theme' tab. I can see my music in iTunes but when I double click on it nothing happens!
In iTunes go File -> Library -> Organise Library -> Reorganise Library.
Then quit and restart iPhoto.
Credit to user keysandfood who figured that one out. -
When I put my headphones in it gets all crackly and I can't hear the singing but when there's no headphones in it works perfectly fine
It could be bad headphones. Try another pair. It could be gunk in the headphone jack. Try cleaning it out. It could be a bad headphone jack. Make an appointment at the Genius Bar at your local Apple Store.
Maybe you are looking for
-
Whats the best way to do a clean new install
Funny thing is I have always only had Macs and never used this board to post. There has been some bad Apple < LOL > machines in the past that had serious problems. Like the old G4 mirror door. I have gone from a G5 Dual 2.33 ( best Mac I ever had! )
-
I have about 40 pictures that i would like to set up in DW like: Maybe a thumbnail page and then open pics to larger format when clicked.... Is there some kind of prewritten code / wizard that can help set this up?
-
Unable to open InfoPath forms with large attachments in browser
We have been running a infopath solution on SharePoint 2010 for a couple of years now. The form is rendered in the browser, but when the attachments are large in size (seems like a ~10MB limit for the form), the system would not allow the user to edi
-
IMessage in Mavericks - the screen goes black
the screen goes black if I am not using it. Messages works fine, but it's annoying to have to click on the window to get the screen from black to text
-
I have an ipod touch and my computer is all of the sudden not recognising it. I cannot upload a playlist because when I plug device in. It shows up as a whole other ipod. Thank you Teresa