2nd Hotsync prevented

I just got the Palm M-105 (cause I like the alkaline batteries use over rechargeable),..anyway...
I successfully did my first Hotsync and sync'd the information from the software with the M-105.
Then, I installed the software for the Palm foldable keyboard. So when I tried to Hotsync the keyboard software to the M-105, I keep getting an error message now that says,
"Unable to initiate Hotsync operation because the Serial Port is in use by another application".....
No it's not!.. Nothing is using the serial port now any different than when I first Hotsync'd successfully.
I can't figure this out. I checked all the drop-down selection to make sure all is correct, and I looked in Device manager for an exclamation mark indicating a problem, but no problem indicated there....Now I can't Hotsync... hehe...Help!
Frank
Post relates to: Palm m105

Use a paperclip or so and poke the little hole in the back.
You can find this info in your manual
Post relates to: Treo 680 (Unlocked GSM)

Similar Messages

2nd time asking.......Pureplay Poker site is being redirected, hacked by facebook, and downloading trojans, etc....can this be prevented?? in English

2nd time asking.......Pureplay Poker site is being redirected, hacked by facebook, and downloading trojans, etc....can this be prevented?? in English
== URL of affected sites ==
http://player.pureplay.com

Hello Simeon.
If a site is hacked or infected, the best course of action is to immediately stop using it. On the other hand, it seems to be working fine for me. You may be having a problem with some extension that is hindering your Firefox's normal behavior. Have you tried disabling all extension s (just to check), to see if Firefox goes back to normal?

TS2446 blocked icloud and mail 2nd time--how to prevent?

This is the 2nd time this year I have been blocked out of icloud and macmail application.
Both times the symptom was macmail asking over and over and over for the password and not accepting it.
The 1st time was Jan 4 or so, grave consequences: by the time I troubleshot it with an apple-savvy friend, I had lost a full time job interview oppty.
Have now changed password approx 15 times, a password management Nightmare.
I work a lot online, and internationally.
Have had a mac.com address professionally for 10 years or so, have used it for all job correspondence and job search.
All my professional network have it and I really do not want to switch permanently to gmail.
Is there any way to prevent this from happening again?

Thanks for suggestions, but no luck... Moving the Event and Project folders to root stops them from showing in FCP X completely.
According to the User Guide...
Final Cut Pro X - User Guide
Your Movies folder is the default location for all project and Event files:/Users/username /Movies/
http://manuals.info.apple.com/en_US/final_cut_pro_x_user_guide.pdf
So they are in the right place, but not updating at start up.
Any other thoughts?
btw.. smylink is a Symbolic link from my users folder on the System disk (which runs from SSD) to my Movies folder which is on another HDD

How do I prevent a 2nd website from nuking a 1st site?

I hope you can help me since I have not succeeded in my attempts so far. On one macbook I have a fully developed iweb website that I want to keep. When I attempted to design a 2nd site, with a new name, using iweb in my macbook pro, it simply replaced my original site. Yikes! The 1st site is www.nicholsloy.com/galleryzine. I thought I only had to use a different name say, www.nicholsloy.com/wordart to enable having 2 sites. What am I doing wrong?

When you publish more than one site to MobileMe using separate domain files its the index.html file of the first site that is overwritten by the second. The site folders should still be present and you can verify this by going to Finder/Go/iDisk/My iDisk/Web/Sites.
This means that your personal domain name will now point to the second site. To avoid this you have to upload the index.html file for the first one after publishing the second.
Note that MobileMe only allows the use of one domain name forward using Cname. Others have to use masking....
http://iwebfaq.org/site/iWeb_Domains.html
"I may receive some form of compensation, financial or otherwise, from my recommendation or link."

Extra monitor w/laptop in office, when out of office how do I prevent Firefox from displaying on the non-existant 2nd screen?

When I am out of my office using my laptop, upon launching Firefox, it displays all of the tabs from the previous session on the non-existent extra monitor which is set up as a screen extention for when I am in my office. All of the other programs that I park on the extra monitor (Outlook for example) display on the laptop's screen when the extra monitor is not attached. Is this a bug? Or, must I not save my open tabs when exiting Firefox if I am going to use the laptop w/o the monitor?

Thanks for your suggestion. I sort of came to that conclusion as I was typing the original question. However if there is anyone out there who has a solution that is not dependent on my remembering to do something before I exit Firefox, it will be welcomed.

Hotsync is preventing me from synching in Outlook Overwrites mode because of "other links" ....?!

I'm getting this error ... What does it mean, and what do I ned to change and how mates ...?
The handheld folder, Contacts, has the synchronization option "Outlook Overwrites Handheld". A handheld folder with this type of synchronization option can not have other links with the synchronization option "Synchronize" because conflicts will occur. When you go to synchronize at the other PCs, you must go into the settings and correct the problem by either changing the synchronization option to "Handheld Overwrites Outlook" or "Do Nothing" or deleting the links.
Cheers
Stormy
Post relates to: Treo 650 (Unlocked GSM)

So you don't touch and it moves by itself?

FDM export to HFM - 2nd export did not clear all data from 1st export?

Has anyone experienced exporting a replacement FDM file to HFM where the 2nd file did not contain an account that was present in the original file and that account/value in the 1st file then remained in the HFM trial balance and caused it to be out of balance? Does the replace export option not clear all the prior file data? The only unusual part of it might be that the problem account was derived using logic group script? Thanks.

Thanks Hensen - Sure, it was easy enough to fix once I deduced what the problem was - although my solution was just to use the data clear function and reload. The real question is how to prevent it from happening again and it sounds like I can't do much about it - other than trying to train the users to watch out for do-over files that have fewer accounts than the original load?? Am I wrong to think that HFM should try to fully clear all previous data from a load file if there is a replacement or at least try to validate whether or not all prior accounts have been repopulated?? There's plenty of good validation in the validation step of FDM. Why not during the export step? If this makes sense, I'll put in another "enhancement request" to support.

Issue with Upgrading to 2nd Generation MotoX

Dear Verizon Wireless and Motorola Mobility,
Your 2nd Generation Moto X Upgrade program is fatally flawed and my experience highlights everything that could possibly go wrong when attempting to upgrade an existing plan.
As Verizon replied to my tweet (my twitter name is @melting_plastic), “Getting a new phone should be an exciting time.” but my experience has been everything but that.
My current phone is a Motorola Droid Razr Maxx. This was my first entry into the Android operating system and I fell in love. As a former Blackberry user, I was a bit hesitant to switch but upon receiving this phone in May of 2012, I had nothing but a great experience with it. This experience made want to continue with a Motorola phone upon my next available upgrade and I had waited to upgrade my phone until the newest Motorola phones were announced. I put off my upgrade for over 5 months waiting for the announcement of a new phone with my current phone deteriorating. The battery life has dropped to less than 2 hours and it has begun to freeze constantly with all the upgrades to software that it is unable to handle. Due to these issues, I checked every day waiting for an announcement of the new Moto X to be release and was finally happy when it was announced it would be released on September 27th for Verizon.
On the morning of Friday September 27th, I attempted to order my phone, a 32gb model, through the MotoMaker website and my first issue arose. Even though I was eligible for an upgrade, the MotoMaker website required a credit check for me to upgrade. As I am not the primary account holder, I did not feel comfortable inputting my father's information for a credit check. I also felt it was not necessary as I was paying the $149.99 by my credit card and the account has been with Verizon since the mid 1990's while it was still Bell Atlantic. As I was eligible for an upgrade and not a new account, it seemed a bit much that this credit check was needed. After searching the internet, I found many posts from the original Moto X release about this issue and the solution was to go to a Verizon Wireless store and pre-purchase the phone there and use the provided pin to order the phone at the MotoMaker website.
During my lunch break on September 27th, I visited the Wireless Zone retailer in Malvern Pennsylvania and waited for over 45 minutes to talk to an associate in an attempt to pre-purchase this phone and receive a pin for the website. This associated had no information about the ability to purchase this pin nor could he order the 32gb model directly for me. He apologized to me about the wait and his inability to fulfill my order but recommended me to go to a retail Verizon Wireless store as they may be able to help me.
After returning to work, I decided to attempt to discuss my issue using the Verizon Wireless help chat on its website. The operator suggested to call the Verizon support line and that they should be able to help me on this purchase. I proceeded to place the call, once again waiting on hold for 30 minutes, until I finally was able to talk to a representative. This representative was unable to help me but transferred me to another department that may be able to. After a brief hold, I was transferred to an individual who was finally able to help me out. He informed me that the 32gb model was not in the Verizon system but was expected to be added on October 1st. He apologized for the wait but at least he was able to provide me with valid information.
On Saturday October 4th, I visited the Verizon Retail location in King of Prussia Pennsylvania and once again waited 45 minutes before being seen by a representative. This time I was helped by an associate named Jeremy who knew exactly what I meant by purchasing a pin. After a bit of struggling to properly place the order, the order was placed with the help of a manager, at the price of $199.99 with a $50 mail-in-rebate. This became the 2nd area of disappointment. Not only did I have to wait to purchase this phone but I had to pay an increased rate up front and needed to send in for a mail-in-rebate. I thanked Jeremy for his help and headed back to my residence 15 miles away.
Once home, I attempted to place the order for my phone. As I live 100+ miles away from the primary account address, I had planned to have the phone shipped to my work as I had done when I purchased my Droid Razr Maxx. The MotoMaker website prevented me from changing the shipping address and I was once against frustrated by this process. I used the MotoMaker online support tool and they informed me that I must contact Verizon and they can adjust the shipping address as each PIN has a pre-defined shipping address attached to it.
I called Verizon's technical support line at approximately 4:30PM from my home phone. After once again waiting on hold for half an hour, I was finally connected to an associate and she was very friendly and attempted to help me with my shipping issue. She understood my frustration and placed a 3-way call between her, myself and Motorola support. During this call, she and myself became very frustrated with Motorola support staff as they refused to adjust the shipping address and stated that there was nothing that they could do. She apologized to me and suggested that I return to the King of Prussia location and attempt to sort it out there.
Begrudgingly, I returned to the Verizon location and once again waited to speak to Jeremy. He apologized for my situation and saw the only way to rectify it was to have FedEx adjust the shipment address after it had been shipped. He informed me that any charges that would be incurred to do so would be credited to my account if I returned to the store with the receipt.
I returned home and attempted to place the order again. This time I was able to adjust my shipping address and placed the order. While doing so, I received an error message and was instructed to call Motorola's support line. I called this line at around 7:45PM and spoke to a gentleman named Christian. He opened up support case 141005-006808 and informed me that because of my attempt to change the shipping address, this was why the error occurred. He instructed me to attempt to replace the order using the original supplied address and e-mail account and that I “must” use the Chrome web browser. This statement of having to use the Chrome browser was a complete fallacy and he refused to accept that any other browser could be used to properly order the phone. I installed the Chrome browser, attempted to order the phone and this time I was informed that my PIN was already used, likely during the original failed attempt. Christian informed me that he must escalate the issue and it would take an additional 24-48 hours. The simple act of creating a new PIN should not take this amount of time.
On Monday October 6th, I was finally able to get in contact with another associate from Motorola who was instantly able to create a new PIN for me. I once again placed the order and this time it went through with no issue, order number 00789348. The only disappointment was that I now had to wait until “approximately October 27th” to receive my new phone. During my waiting period, I periodically check the MotoMaker website and during that time, noticed that they offered an additional $50 discount on the Verizon Moto X which would have brought my total down to $99.99. So on top of the additional wait and disappointment, I had now paid $100 over the current price through MotoMaker .
On Tuesday, October 22nd, I finally received the e-mail stating that my phone had shipped and was due to arrive in Forked River, NJ on October 23rd. Using the FedEx website, I attempted to adjust my shipping address to my work, at the cost of $30 and a delay until Friday October 24th. I was unable to perform this action and then attempted to adjust the shipping address to the location I would be at Friday night (my sister's house) for the same delay, but only a cost of $5. Once again I was unable to perform this action and decided to call FedEx directly. After speaking to the associate at FedEx, she informed me that the only way to adjust the address was to have the shipper, Motorola Mobility adjust the address. With my previous issues with Motorola, I knew that this request would be denied. At this point, my only recourse is to have my parents ship me the phone to my work once they receive it on October 23rd. Even then, I'm unsure if FedEx will leave the phone at the location without a signature if no one is there to sign for it, which is why I attempted to ship the phone to my work.
At this point, I'm extremely dissatisfied with both Verizon and Motorola with how this whole situation has transpired. I feel a though I should have purchased an Apple iPhone 6 even though I am not a fan of the iOS platform or a different Android OS manufacturer. As a Fios account holder, I am also tempted to switch to the competition after 3+ years of being a customer. I feel that both Motorla and Verizon failed to rectify any hardship I had experienced in my attempt to purchase this phone and even now fear that I will not receive my phone in time to mail in mail-in-rebate which needs to be postmarked by November 1st.

MPerreca, This is quite a lot for you to have to go through! We surely don't want to lose your business as we appreciate your loyalty with us. I understand the challenges that can come in needing the shipping address changed on your phone orders. I'm glad to learn that the phone is now on it's way.
I'm confident that you'll be fine with submitting the rebate for your phone. If you do run into troubles with the submission, please let us know. You can also pre-submit your rebate information, here: http://bit.ly/1kKwKJK. Let us know if you have further concerns.
TanishaS1_VZW
Follow us on Twitter @VZWSupport

"Team Foundation Server" is preventing authentication for whole team !!

I am getting 2 errors through the event viewer that prevents TFS 2013 authentication for local domain users, also this error started appearing after having TFS upgraded to [ 12.0.30723.0 (Tfs2013.Update3) ].
1st
Error (from administrative events):
The Execute method of job definition Microsoft.SharePoint.Administration.SPUsageImportJobDefinition (ID a51a0244-765d-433b-8502-0bb0540ad1fd) threw an exception.
More information is included below.
Access to the path 'C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\15\LOGS' is denied.
Tried so far:-
- changed the path to another folder from "Diagnostic Logging" in another drive, but still getting the same error.
2nd
Error (from application server):
DistributedCOM error
The application-specific permission settings do not grant
Local Activation permission for the COM Server application with CLSID
{000C101C-0000-0000-C000-000000000046}
and APPID
{000C101C-0000-0000-C000-000000000046}
to the user NT AUTHORITY\NETWORK SERVICE SID (S-1-5-20)
from address LocalHost (Using LRPC). This security permission can be modified using the Component Services administrative tool.
Which I already got fixed using the following steps on a thread I opened before (but still getting the same error).
https://social.technet.microsoft.com/Forums/windows/en-US/3896e35c-b99a-4d30-b662-f92d337c8d6f/windows-servers-components-services-and-regedit-permissions-are-grayed-out-for-my-admin-account?forum=winservergen
Other
Fixes I tried
- Found on another topic that it is not sharepoint that is causing the problem, but it is the generated ASP.NET web pages used for testing is causing the memory to fill up due to cashing on RAM, the fix suggested to change IIS cashing from RAM to HD to prevent
loading up using w3wp.exe from processes.
Concern
- by checking other topics for people having the same problem, it was mentioned that this error appeared after the lastest TFS update, is there is a fix for it ?

Hi Amr,
For your first error, you can change the "Diagnostic Logging" path, aslo change the path of the usage and health data connection the same with your ULS log location. Check this
blog for more detils and make sure you follow the instructions. Restart SharePoint tracing service after the operations. You can also check this
thread for more references. If you still have any other concerns about SharePoint, you can open a new thread in SharePoint forum for a better response.
About the second error, seems it's not related to TFS. You can also run TFS best practice analyzer to check if there any configuation issues on your application tier server. However, you can also refer to this
blog
to get this issue resolved. If the problem persists, you can elaborate more details about your scenario and the reproduce steps or open a new thread related forum.
Best regards,

"Sharepoint 2013" is giving error that prevents local domain users authentication for "Team Foundation Server"

I am getting 2 errors through the event viewer that prevents TFS 2013 authentication for local domain users, also this error started appearing after having TFS upgraded to [ 12.0.30723.0 (Tfs2013.Update3) ].
1st Error (from administrative events):
The Execute method of job definition Microsoft.SharePoint.Administration.SPUsageImportJobDefinition (ID a51a0244-765d-433b-8502-0bb0540ad1fd) threw an exception. More information is included below.
Access to the path 'C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\15\LOGS' is denied.
Tried so far:-
- changed the path to another folder from "Diagnostic Logging" in another drive, but still getting the same error.
2nd Error (from application server):
DistributedCOM error
The application-specific permission settings do not grant Local Activation permission for the COM Server application with CLSID
{000C101C-0000-0000-C000-000000000046}
and APPID
{000C101C-0000-0000-C000-000000000046}
to the user NT AUTHORITY\NETWORK SERVICE SID (S-1-5-20) from address LocalHost (Using LRPC). This security permission can be modified using the Component Services administrative tool.
Which I already got fixed using the following steps on a thread I opened before (but still getting the same error).
https://social.technet.microsoft.com/Forums/windows/en-US/3896e35c-b99a-4d30-b662-f92d337c8d6f/windows-servers-components-services-and-regedit-permissions-are-grayed-out-for-my-admin-account?forum=winservergen
Other Fixes I tried
- Found on another topic that it is not sharepoint that is causing the problem, but it is the generated ASP.NET web pages used for testing is causing the memory to fill up due to cashing on RAM, the fix suggested to change IIS cashing from RAM to HD to prevent
loading up using w3wp.exe from processes.
Concern
- by checking other topics for people having the same problem, it was mentioned that this error appeared after the lastest TFS update, is there is a fix for it ?

Hi Kpdn,
Thanks for your post.
All your participation and support are very important to build such harmonious/ pleasant / learning environment for MSDN community.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

July 2nd Release

Cristinel Anastasoaie
July release - New admin user interface updates, additional customer reports and bug fixes
We are announcing a new Business Catalyst release, scheduled to go live on Monday, July 2nd.
With this release, we have focused on improving the new user interface and make it ready for prime time, added additional reports and continued updating the new file manager. Additionally, we started to deliver on a series of fixes and product improvements that have been requested by our partners during the last few months.
Infrastructure updates
To ensure the highest security and performance levels for our services, we're applying a software update on all our database servers. For more details about the update, read our Business Catalyst Service Maintenance, June 2012 - Updated blog post.
Features and enhancements
New admin interface is now the default interface for new users
With this release, the new admin user interface will become the default interface for new users and customers, regardless of when the website has been created. To ensure a smooth transition to the new interface, we will continue to allow customers use the interface of their choice and the system will remember their selection the next time they login to admin.
Customers and secure zones report
Secure zones are a great way of creating membership websites which were lacking some basic reporting features that would have enabled customers to view detailed information about their subscribers or send them email campaigns related to their subscription.
With this release, we are enhancing our reporting system by allowing customers to create and save reports of customers and secure zone subscriptions. This report will automate many of the manual tasks a site owner has to do today to extract actionable reports for customers subscribed to secure zones. Additionally, once such a report is created it can be used in the email marketing system to send email campaigns to these customers.
For the next release we are looking into exposing the opt-in status so that customers can view their subscribers communication preferences and act based on this information.
Redirect system domain and URLs to default domain for better SEO performance
Starting with this release, we are allowing users to redirect system domains and URLs to the default site domain or corresponding URL using 301 redirects. This will help customers achieve better SEO performance and avoid duplicate content penalties from search engines. To enable this redirect, users will have to edit the system domain and check the Redirect to default domain check box.
With the July release, we are going to enable the same functionality for secure URL as well, with the exception of payment pages and POST requests, which will remain on the secure domain.
Note: when admin user is logged in admin using the system domain, the system will not redirect front-end pages while session is still active; user must log out of admin for the redirect to work.
User interface consistency for renamed modules
The new admin user interface has been updated to consistently use new names for these modules:
Media downloads (former Literature)
News (former Announcements)
Events (former Bookings)
There are still two areas where the old naming is being used:
Module & tag names (e.g. { module_announcement }, { tag_announcementurl_value })
FTP folder names (e.g. /Layouts/Announcement)
These will take a significant engineering effort to update, as we need to support existing sites that could be already checked out to local file systems, or replicating existing sites. Together with some of the partners that are using this features intensively, we decided to leave these areas with the old naming for now, and redirect the engineering effort in two larger projects currently under way: handling partner enhancement requests and a better web apps engine.
Offline payment security improvements
The security of the current offline payment workflow has been improved in order to meet international security standards for offline payments:
A new, additional “Offline payment password” must be set, and updated every 90 days
Pass phrases are now unique to each order. You can no longer use the one pass phrase to access every secure PDF
This will help transactions be more secure and protect business owners from potential attacks. Here's a more detailed view of this feature.
Delete paid and Creative Cloud sites from the Admin Console
We moved the "Delete Site" functionality to the Admin Console of the website in order to help Creative Cloud users and beginners cancel an existing paid website that they don't need anymore. Here's a snapshot of this new feature.
Other changes
Invite Partner user: starting with the release, partners can add other partners as site admins through the Site Details screen in the Partner Portal. This functionality has been moved from the User Management interface and it is enabling partners to collaborate on developing a site without impacting the site admin limit
File Manager alpha: drag'n'drop can be used to move one file at a time between different folders
File Manager alpha: expired sessions will prompt you to re-enter your password and resume your work on already opened files
Billing Settings admin menu is hidden for all users of trial or Creative Cloud redeemed sites
MetaWeblogAPI switch to https - Starting with this release, we will push a security update for the MetaWeblogAPI of Business Catalyst to disallow use of an unsecured connection (http) as that sends login credentials in plain text.
Updated time zone for CRM entities: we have updated several CRM screens so that they display entities based on site's time zone instead of the Asia Pacific datacenter time. The following lists have been updated: Customers, Orders, Cases, Event Bookings, Opportunities and Modules>Comments
Updated free trial sign-up: Free trial sign up with an existing Business Catalyst or Adobe ID user now creates an additional trial site and places it under the user's partner portal
Deprecated functionality
CRM User Passwords will no longer be exposed through API and custom reports - with this release we are completing our security policy update for CRM passwords and will stop delivering CRM user passwords through API and Custom Reports. For more details about the security update, read our Important Security Policy Updates for CRM Users - Effective February 8th announcement
Blog trackbacks, not present in new user interface, have been removed from the new sites templates as well. While existing trackbacks will continue to work, we recommend to remove them from your sites due to spam issues, and use instead social modules for significantly more effective content sharing
Triangle Dreamweaver extension for versions CS3 and CS4 will stop functioning after July 30th. Please use these newer alternatives.
Separate menu visibility setting has been dropped from the new admin user interface and replaced with a more granular permission system that also control the menu visibility. More details about the new permissions system on our February release notes blog post
Issues fixed by May release
Updated caching engine to refresh cache when resizing images under 52 KB
Added single sign-on between Creative Could and Business Catalyst
Dreamweaver: the free partner site for standard and premium partners appears in sites listing
Issue 3085538 - Fixed an issue that caused a blank page to be displayed when trying to download a literature item that does not have a physical file on the disk
Issue 3186843 - Fixed an issue that was causing changes to the template to not propagate to the pages
Issue 3188096 - fixed an incorrect logic in template caching mechanism causing preventing users from seeing the changes in the template
Issue 3189902 - Updated the system limit recipients list to remove the email only users
Issue 3192349 - Removed search/new case from old PP support
Issue 3192268 - Updated the "Syndicate this Blog RSS" option tooltip from the Blog details page to specify that only new blog post will be added to the feed once the setting is activated
Issue 3201622 - Fixed a Creative Cloud integration problem forcing users to purchase an website when they still had available entitlement sites
Issue 3199468 - Fixed an issue preventing new business owner users that on sites created by free partners to post cases
Issue 3120761 - Fixed a bug causing 'An error occurred' message to be displayed when trying to add a Hyperlink in a Message from a Case
Issue 2991429 - Fixed a bug causing deleted field in a Web Form from a Template site to be carried on a new site when replicating sites from a template site
Different internationalization small bugs for French and Japanese
Business Catalyst new admin interface updates
Removed Advertising Group permission from user roles permission selection screen
Updated permissions to stop requiring Administer system permission for creating email accounts
Changed the corresponding permissions for import screens so that users can import entities if they have permissions to edit or delete
Updated the CRM>Customers>Customer Detail>Subscriptions screen stop displaying an "ERROR: You do not have any catalogs. Please create one." error message when site has no catalogs
Updated the generate the XML feed screen behavior to display the resulting URL clearly and allow users to copy and paste it
Updated invite user email content to include links to the site admin so that invited users can use the email to retrieve the admin URL
Fixed a push site live issue resulting in a crash when used by admin users that were also partners
Updated the edit web app item screen to have a single default action
Fixed an issue causing a Java Script error when trying to open link manager from within radTree link picker
Fixed an issue preventing users from resending the invitation email for an email account right after adding it as admin user
Fixed an issue causing the "Lost your password" link to open the "Retrieve Password" dialog with in the old interface when used in a "Sign-In" dialog triggered by 401 exception
Added e-commerce & website reports in the recent items menu
Fixed an issue causing the CRM search results to be displayed over the search field
Fixed an issue preventing users from adding catalogs using the quick actions menu, right after adding another catalog
Fixed an issue preventing users from adding web apps using the quick actions menu, right after adding another web app
Fixed an issue preventing users from creating or updating blog posts when the interface language wasn't set to English
Removed delete action for system and secure domains
Updated email campaign wizard to open the email preview in the new browser window
Updated an error message displayed in the domain management user interfaces when trying to add a domain that exists on another site
Added workflow approval process link in page details
Removed sales quota from forecast report
Updated "Add Domain" link behavior in webBasics sites to display the "Push Site Live" button when trying to add a domain on a trial site
Updated the new File Manager to prevent users from removing the "{tag_pagecontent}" from a template; starting with this release, the system will display an warning and will not save the template
Fixed a bug preventing the system from saving a web app when users were selecting a template and moved to the next step
Fixed a a bug causing web app fields to not be saved when creating a new web app
Fixed an issue causing the left navigation menu to break when switching between the File Manager and the admin dashboard
Fixed a bug in the client site validation in the "My Details" screen that was generating a Java Script error
Fixed the scrolling in email marketing reports on the Mac OSX/Safari configuration
Fixed an issue causing the link manager to stop working when loaded in a pop-up window
Fixed an icon rendering issue on the recent items menu
Fixed several issues generating Java Script errors when managing users and email accounts
Fixed an issue in the File Manager making the "[See Details]" buttons to open the image manager in the old admin interface
Fixed an issue on Internet Explorer causing the admin interface to remain in a loading state after downloading the import template
Fixed an issue causing quick actions menu to stop working when trying to add a page after editing and saving a page
Fixed an issue making the breadcrumb info to change in the current displayed page after subsequent clicks on a selected web app entry in the menu
Updated the Websites Report interface to correct a design issue
Updated the Customer Reports>New Customer Report>Fields interface behavior to stop forcing users to select a data field when trying to go back to report type selection step
Fixed a bug generating a error when trying to insert an image with the Image Manager when editing a page
Fixed an issue in website reports causing an error when trying to export as PDF
Added the "Upgrade" button for sites under consolidated billing
Updated error messages for TOU management, billing management, sign-in dialogs, API errors
Fixed an issue causing the system to send the password recovery email when pressing ENTER in the "Edit Admin" user screen
Fixed a Java Script error preventing users to access the File Manager
Fixed a rendering issue with the File Manager on Internet Explorer 9
Updated File Manager to allow customers upload files in site root
Increased the indentation depth level to enable file list indenting to work for level 4+ folders; we should increase the depth level of indentation
Fixed several issues causing interface to freeze or crash after moving files or folders
What's next
Setting page and template properties from new File Manager (mockups)
Consistent Save & related action buttons in the new user interface (mockups)
Redirect secure domain to default domain
Other smaller improvements including use of absolute links in the email marketing editor, display email address in events subscribers list, random display web app items by category
For up to date and more detailed information about near term improvements, join us in one of our June Partner Townhall meetings.
Thank you,
Cristinel Anastasoaie
Adobe Business Catalyst Product Manager

ok mate, first off please, layoff the pissed off giant block of text posting style, it makes it hard to read your post lol.
second, the flexijack only supports line in, microphone in and optical out on this card thats why the option was greyed out/ removed
its not needed with this card.
and, just to make sure, you are pluging your mic into the white jack with red light coming out right?
after that, you are selecting microphone as your audio input on the recording settings of windows volume control right?

FF connects to several IP addresses on start-up, how to prevent it from happening?

Hi, I am wondering how I can turn Firefox off from connecting to several IP addresses when it starts up?
I have set Firefox to remember my visited web pages/tabs, but to not load until the tab is chosen.
I have also gone through the advices on the following page:
http://support.mozilla.org/en-US/kb/how-stop-firefox-automatically-making-connections
and have followed it carefully and disabled everything but to no avail.
Also in the about:config I have renamed all Google http(s) links to see if it prevents FF from connecting as some of the IP addresses leads to Google (173.194.32.*), but no success.
A search here on Mozilla or Google gives very little on this particular matter.
I have also disabled all addons but doesn't help.
The only way to prevent FF from connecting with internet is to delete "prefs.js" and "sessionstore.js", but then I loose all history.
I have also used a clean FF installation and taken the "prefs.js" and "sessionstore.js" so to not loose history, but it doesn't help.
Can anyone help me out, thanks!

Ok, I have now installed an original version of Firefox 13.0.1, set it up with a basic set of few add-ons for safe browsing being as follow:
* NoScript
* RequestPolicy
* BetterPrivacy
* HTTPS Everywhere
In all cases described below, I browsed to a few pages, afterwards I go to an empty page/tab (about:newtab) before I close the browser, and is set to: "browser.newtabpage.enabled;false" in the hope also a newtab should be empty.
I also followed the instructions under the following link: https://support.mozilla.org/en-US/kb/how-stop-firefox-automatically-making-connections
* further on I have disabled a few other things under about:config to stop this "leak", such as webGL, telemetry, rename all google links, etc.
1st test
* I did restart in Off-line mode as described under the link given by jscher2000, when restarting the firewall shows no sign of connection to the internet, not even when I toggle from off-line to on-line.
2nd test
* with all add-ons enabled, I got the following result, see below for the list of IP numbers/info:
* 212.121.101.7 Server Location: Netherlands ISP: Routit BV
* 173.194.32.0 Server Location: Mountain View, CA in United States ISP: Google
* 173.194.32.4 Server Location: Mountain View, CA in United States ISP: Google
* 95.100.4.61 Server Location: Europe ISP: Akamai International B.V.
* 192.150.19.49 Server Location: San Jose, CA in United States ISP: Adobe Systems
* 78.129.207.59 Server Location: United Kingdom ISP: Iomart Hosting Limited
* 69.50.232.54 Server Location: San Jose, CA in United States ISP: Silicon Valley Web Hosting
* 82.103.140.42 Server Location: Denmark ISP: EasySpeedy ApS
3rd test
* I disabled all add-ons and closed browser, and started again, same result as in 2nd test, except that 212.121.101.7 was replaced by
* 37.0.87.7 Server Location: Netherlands ISP: Routit BV .
As this behavior has apparently nothing to do whether it's portable or non-portable version of Firefox, one can assume it has always been like this as at least between all versions from 13.0.1 to 19.0.2, as the portable version 19.0.2 behaves the same way.
Let us not forget another user have experienced apparently the same issue under the following link: http://support.mozilla.org/en-US/questions/930187
Any more ideas how the browser user can take control over this behavior, or any suggestions what could be wrong?

Firefox will not start; new profile fixes it for 1 time, then 2nd time its back to broken

Windows 7 x64, ff3.6.8
ff3 will not run, clicking on .exe will not begin any app in taskmanager. the most i get is when clicking ff3 from the taskbar in win7 it will flash as if it is trying to do something, but nothing happens and the flashing stops.
uninstalled ff3.6.5; reinstalled 3.6.8, still same issue.
i created a new profile and started ff3, ff3 started & i got to a generic home page. i closed ff3, copied my bookmark file from the default profile to the new profile, restarted ff3, same problem as in the beginning.
i created a new profile & again it starts up, but when i close out, even without copying the bookmarks over (i was assuming that was the corrupted file), it will not run the 2nd time.
i have done this for 7 profiles and all of them work the first time, but none will work after that even without copying any profile information from the original default profile.
in addition i cut all the profiles out of the profile folder and cc'd to another location on another drive thinking that'd prevent the default from corrupting the other files, nothing.
brief history(sorry for the long post)
I ran a windows update prior to leaving on vacation, shut the PC down & when I came back the pc wouldnt boot. reset my bios to default and finally got back into windows & it finished the update.
when i got back in, ff3 was giving me problems and kept hanging up for some reason. so i hard reset & tried to implement my OC profile in bios. i was not able to get back into windows w/ my OC profile again, so i again went back to default bios.
ever since then ff3 will not work. ie8 works fine, no viruses reported thru mse, i cant figure it out!
any help would be greatly appreciated, thanks.

well i kinda fixed it i spose...
i deleted everything in appdata under mozilla & macromedia and deleted the plugins folder from my installation folder for ff3. uninstalled ff3, reinstalled ff3. now everything works fine. just have to redo my bookmarks & settings.
sorry to waste anyone's time...but hopefully if someone else has the problem, now they can fix it. peace.

How do I set up a guest account using the AirPort Express 2nd Generation?

I Just purchased a new 2nd Generation AirPort Express. The features list and the set-up guide says that I should be able to set up a guest account, but nowhere have I found how to do this. I am running AirPort Utility 5.6 on my MacBook Air under Lion and I even get a message that I should not make updates using version 5.6 because it is not the appropriate version for the 2nd generation AirPort Express. Software Update says there's nothing new for me. When I search the Apple support site there is not even a version of AirPort Utility 5.6.1 for Lion though there is one for Snow Leopard. Even when I installed that version on my Mac Mini running Snow Leopard, I could see no way to create a guest account.
I came across a YouTube video describing a demonstrating how to set up the guest account on Time Capsule and the AirPort Exteme. There it's quite obvious because in the General section there is a tab for setting up the guest account. There is no such tab in either version 5.6 of the AirPort Utility I'm running under Lion or version 5.6.1 running under Snow Leopard.
What am I missing?
-Bill

Apple assumes that you are connecting the AirPort Express to a simple modem....not a modem/router or gateway type of device......that provides both modem and router functions in one enclosure.
If you have the AirPort Express connected to a gateway device, the Express is detecting that another router is present on the network, so the Express operates in Bridge Mode to prevent the conflicts that would normally occur when two routers are on the same network.
Open AirPort Utility 5.6, select the AirPort Express and click Manual Setup
Click the Internet icon, then click the Internet Connection tab
If the Connection Sharing setting is currently configured to "Off (Bridge Mode)", the Guest Network cannot be enabled with the type of "modem" that you have without breaking some basic networking rules.

How do I prevent a user from opening multiple instances on the same computer?

On the site oldnavyweekly.com there is a .swf that prevents users from opening multiple instances of the site at the same time on the same computer. If you open the site, and try to open it a second time in another window, it won't load. You can't open the site again until the first window is closed. How did they implement this?
From my analysis it is NOT:
1. Cookies - The block still takes place if you try opening it in IE and also try opening it in Firefox simultaneously.
2. Flash Cookies - The block still takes place if I disable flash cookies.
3. IP Based Block - You are not blocked if you open the site on two separate computers with the same outbound IP address. From my analysis, their server does not assist in the block at all.
It seems as if their .swf is creating some kind of global system-wide object that can be detected in other instances of the application on the same machine. How did they implement this?
Thanks!

you're welcome.
actually, unless you take an extra step, the first opened swf will close. if you want the 2nd to close, the initial receiving lc will send a message to sender that causes the sender to close.

2nd Hotsync prevented

Similar Messages

Maybe you are looking for