2nd level of Drill Down

Hello,
I am making the Drill Down configuration.
1st Level is
- Area
2nd Level is
-Branch
3rd Level is
-Shops
After I make above configuration, I test this on the BI Answers.
ex)
Area
New York
Tokyo
Paris
1. I click the column "Tokyo".
2. Then the report will show like this
Area 　　Branch
Tokyo　　Asakusa
　　　　　　Ginza
and I can click "Tokyo","Asakusa" and "Ginza".
But at this point, I don't want to let users click the "Tokyo" column , but only "Asakusa" and "Ginza" columns.
Is it possible by the configuration of the BIEE Repository or Answers ??

Hi,
I dont think so it is possible.
But If you click "tokyo" only you can see "Asakusa" and "Ginza".How would you stop user to not click tokyo if you want to get to other step to "branches".
If you want to achieve that directly create a dimension for Branch and shops.So user will see branches and shops and make it as a separate sheet for that specific user and give him permissions.
Hope it helps you.
By,
Kranthi.

Similar Messages

IPhone: Looking for a 3 level TableView drill down example

Hi
The TableView drill down example available at Apple's Dev Center, as well as all the other examples of drill downs I've seen, only explains how to do a drill down with just 2 levels. The first view is a table view, and when the user selects an item in the list, another view with more information about that item is loaded.
However, I'm looking for an example on how to do a drill down with 3 levels, or more. The two first views should be regular table views and the final view can be some other view.
I'm currently struggling, trying to understand how to use only one TableViewController for the two first levels. Surely this must be possible, or do I have to create one TableViewController class for each level in the drill down?

I'll piggy-back on this question as mine is the same and I don't see any responses as of yet.
To continue drilling down (3rd level; maybe also 4th/5th, ending in a textView), are subsequent levels down just the first detail view simply reconfigured with fresh data from an additional array, or....should another (and another, and another...) unique detail view be created for each level and used instead? Is one method faster for the user or less trouble for the app writer, short or long term?
If it matters, the layout can be either programmatic or via the Interface Builder - just need a clue which direction to pursue.
If someone could just give a quick answer it would help a struggling new developer, thanks

Totals passing to child levels in drill down?

Hi
I have an issue where i have set my hierarchy for Region to State.
When I drill down my reports, the totals are passing to child levels
So if I have the totals as Region A $100
Region B $200
and If i drill down on Region A to States ASA ASB, ASC
what I see is
State ASA (region total) $100
Region A State ASB (region total) $100
State ASC (region total) $100
What I would like to see is
State ASA $ 50
Region A $100 State ASB $ 20
State ASC $ 30
How do I set things up ? Any help would be appreciated.
Thanks
Bob

Hi,
In BMM layer check weather content level(last tab) is set to detail level(state level or lower than that) in LTS of that fact table.Make it to detail level and try.
Regards,
Srikanth

Macro for same level of Drill down - Data in different grids

Dear Team
We have two characateristics of product - Product Line & Parent product Line.
I have created a planning book with two girds -
What I want is, in the first grid -
The Revised plan for the PL (Product Line) = Forecast Share of PL * Planned Production of the PPL (Parent product pine).
The Planned Production production of all PPLs together (Sum) is available in second gird. But how do I write a macro to fetch Planned production of each PPL (From second grid) and write a macro to calculate the logic in first grid?
E.g. in Above screen, the Planned Production of 60 is total Planned production of two PPLs (Indica =10 & Indigo = 50).
So If I want to achieve to calculate revised plan for Indica V2 & Indica Vista which has share of 40 & 60 % resp, in order to calculate the revised plan as 40% of 10 & 60% of 10 , how do I write a Macro to drill down second grid and fetch value of 10 for PPL = Indica?

Hi Anish,
There is "Series Names Destination:" parameter on Drill-Down (Insertion) Tab of Bubble chart component. By using that parameter you can retrieve selected serie. Via that value you can extract selected serie's selected value and drill down to required selection via some excel formulas like index-match or vlookup-hlookup. I hope that solves your issue.
Regards,
Ahmet

Third level Drill Down report

Hi,
I have a requirement to create the report using Crystal Reports 2008 up to 3 levels of drill-down. I tried to create it but I can create up to only 2nd level of drill-down.
Is it possible to create 3rd level of drill-down. If yes, please let me know how to create it.
Thanks in advance.
Regards,
Neel.

Hi Neo,
I use on-demand sub-reports.
Example:
If main report is for Customer summary which shows the amount received from customer.
Then for 2nd level of drill-down I will insert an on-demand sub-report. This sub-report will show the sales order numbers for that particular customer.
Now for third level of drill-down, I want show the details of sales orders (i.e., all the sales order lines of that particular sales order). So I am trying to insert a sub-report in existing sub-report, but here the sub-report option in the menu is already disabled.
Regards,
Neel.

Cannot drill down from 2nd lowest level to lowest level of hierarchy

In my item master hierarchy, I cannot drill down from the 2nd lowest level (Product Class) to the lowest level (Item Detail).
When I add another level between these 2 levels, then I can drill down from Product Class to this new level, but I cannot drill down from this new level to the lowest level.
Also, if I set the preferred drill path at any level to drill down to the lowest level, it instead drills down to next level down intead of of drilling to the lowest level.
Any thoughts as to why I would not be able to drill to the lowest level of this hierarchy?
Thanks,
Travis

OK, next check, any security in place on the presentation columns which would make the lowest level column unavailable to the user account?
Are you running the report as Administrator?

Reporting by org hierarchy with drill down by each level of reports to...

Hello,
I'm trying to determine how to aggregate reporting by org hierarchy. Utlimately to report on opportunities at the highest level (CEO; all opportunities below CEO) then a second drill down report that shows summary by Level 2 (all those who report to the CEO), then again by Level 3 drill down which would be those who report to somone in Level 2. In all instances I want the report to show all records that ultimately roll up to that level (thus include direct reports alll of their direct and indirect reports )
Level 1
CEO $10,000,000 200 Optys
Level 2
Sales Leader 1 $ 3,000,000
Sales Leader 2 $ 2,000,000
Sales Leader 3 $ 1,500,000
Sales Leader 4 $ 3,500,000
Level 3
<ul><li>- rollup of all that report to Sales Leader 1 (and so on) aggregated by first level of direct reports ($3,000,000)
     Sales Mgr 1.1 $ 1,000,000
     Sales Mgr 1.2 $ 500,000
     Sales Mgr 1.3 $ 750,000
     Sales Mgr 1.4 $ 250,000</li>
</ul>
I'd appreicate any help you can send my way.
Thanks, Aaron

Hi Aaron,
I have come across this and found that using the "Reports To" hierarchy and "Territory Team" hierarchy are not sufficient. I implemented this as a solution for one of our clients and it works very well:
I have modified the user entity and renamed 4 standard fields:
•     Business Unit renamed to "Primary Line of Business"
•     Business Unit Level 1 renamed to "BU Group"
•     Business Unit Level 2 renamed to "Business Unit"
•     Business Unit Level 3renamed to "Team"
Not all fields go through into analytics so I had to use these fields which are available in the Opportunity-Product History subject area. The downside is that they have to be text boxes so restrict access to who can populate these. From this you can get 4 hierarchy levels and drill from one to the next. The record owner then becomes the lowest level in your report and it can look something like this:
Level 1
Primary Line of Business
Level 2
BU Group
BU Group
Level 3
Business Unit
Business Unit
Business Unit
Level 4
Team
Team
Team
Team
Level 5
Sales Person 1
Sales Person 2
Sales Person 3
Sales Person 4
Sales Person 5
Obviously it would appear side by side in the report..
Thanks

Drill down group level question

Post Author: Ksecrist
CA Forum: Charts and Graphs
Hello,
I am relatively new at using Crystal but have self taught on how to use the drill down feature with charts. my problem is that I don't understand the drilldowngrouplevel = <>1 or =0 or <2 values. Are there set #'s for the drilldowngrouplevels? could someone assist in this?
Thanks,
Kevin

I'm sure you have this figured out but just in case... In the Formula Editor>Functions>Print State-->DrillDownGroupLevel. Create a formula (Test?) using the DrillDownGroupLevel function. If you place this test formula in your report and drill down you can tell which level of drill down you are at. If you wanted to suppress something at a certain level you could suppress by DrillDownGroupLevel = 3.

Xcelsius drill down problem.

Hi gurus, I'm developing drill down chart and table.
I want to reset, making cell blank, the drill down cell when i click combo box.
I used push button to refresh or reset drill down value but it can not refresh(reset) drill down cell
because the destination cell of the chart remains drill down value
I tried like below way
*Dashboard explanation
this dashboard consists of one chart, one table, one combo box and one push button.
Of course, chart has the drill down function
a : drill down value
Goal : make drill down cell turn to blank after i used drill down once.
1ST.
when i click the chart and use drii down, a is entered into drill down cell
2ND
by using "push button", i tried to reset drill down cell
but unfortunately it does not work.
Although drill down cell changes instantly to blank after just one second, it changes to a, drill down value
Drill down cell changes like this
1 -> 2 -> 3
a -> blank -> a
i have to eliminate (2->3) phase or find another way to refresh drill down cell.
I think problem is the chart which remains drill down value(a) although pushbutton reset the drill down cell to blank.
Is there any way to refresh or reset drill down value when i click combo box?
Should i develop custom-component? i'm waiting for your answer.
Thanks in advance.
Regards
Kwon

Amit,
Can you confirm if what you're saying also holds for components with the "Enable Drill Down" option enabled, and the "Default Selection" is set to "No Selection (-1)"?
I'm running into an issue where the "Default Selection" value is not cleared out after performing 3 levels of drill-down. On the third time I do a drill-down, by default the first element is selected, even though I've set the "Default Selection" to "No Selection (-1)".
Thanks.

To stop the drill down in OBIEE 11g

Can we stop the level of drill down in RPD.
ie) The Hierarchy level is l1->l2->l3->l4->l5
I need to stop the hierarchy at l4 and it shouldnot drill down to l5.

Hi,
Expand the Dimensional Hierarchy that you have created and at the level where you need to stop the drill down-->open that level-->in general-->uncheck the 'Supports rollup to higher level of aggregation' and this should solve your problem.
Otherwise if you need only till 4th level, then create till 4th level for hierarchy.
Hope this should solve your problem.
Regards
MuRam

Drill down in mangement cockpit

Hi friends,
Could anybody simply explain what is meaning of drill down in managment cockpit?
1. How many levels of drill down, one can provide drill-down in a frame?
2. Can we drill down from monthly to calday wise, year to date,month to date and quarter to date?
3. How can i use calmonth in interval representaion in selection criteria of a frame (cockpit design)?
thanks,
naresh

Version SEM6.0 on BI7 system.
Line: -
If anybody able to access below url info, pls forward me info in this thread:
Make the SEM Management Cockpit More Useful with Drill-Down Configuration
by Paul Halley, Director of Strategic Enterprise Management, Business Information Solutions
Financials Expert - Volume 3 (2004), Issue 2 (February)
http://www.financialsexpertonline.com/article.cfm?session=&uid=d05762e8-8d85-450f-bcea-228d9cd01f3e
thanks,
naresh
Edited by: Naresh P on Dec 15, 2008 8:06 AM

Limit the members shown when drilling down

Hi,
Is it possible to limit the members shown of a level, when drilling down? I have a dimension in groups with a medium level that has a lot of members, and when I drill down from the top level in this dimension, a lot of members are shown and the graph is too confused.
Thanks in advanced...

Hi all,
I have discoreved how to do this programmatically.
//Limit series to 10 elements
graph.setDisplaySeries(10);
graph.setDisplaySeriesLimit(10);
graph.setAutoLayout(Graph.AL_NEVER);
graph.setLegendScrollbarPresence(ThinGraph.SP_NEVER);
graph.setLegendSeriesCount(10);
graph.setScrollbarPresenceSeries(ThinGraph.SP_NEVER);
//And limit groups to 10 elements
graph.setDisplayGroups(10);
graph.setDisplayGroupsLimit(10);
graph.setScrollbarPresenceGroups(ThinGraph.SP_NEVER);
Hope this helps someone with the same problem...

Can Drill-down paths being made dependent on the user roles and groups

Hello Experts
Is it possible to restrict user after certain level of drill down. Here I mean after drilling upto country level from Total World , can we restrict the user to further drill down upto state level.
OR we can say that we need to restrict certain user to look into transaction level details
thansk and appreciate any hlep on this.

i Guess u can...by setting object level security? suppose if you dnt want to drill to state... you can restrict the state column inpresentation laye... so when the user uses the the report he cannot see state and also in drill down....hope this is helpful/answered...

Adding multiple views to a drill down pie chart

Hi,
I'm currently using OBIEE 10g and have a problem when drilling down on a pie chart.
I have a dashboard named spending analytics and it shows in a pie chart, spending by different categories (airlines, automotive, etc).
When i click on the Airlines slice of the whole pie chart i drill down to a pie chart with the spending from different airlines (American, United, etc)
However, I want to have another level of drill down where i can choose an option as speding by state as well. So, spending by state should be part of the airlines.
Then i should have Total Spending by category(airline) > Spending by type(United) > Spending by state(PA,DC, etc)
How can this be done?

Hi User,
Drill Down from Pie chart can be done.
Create a Pie chart report intially, add the same to compound layout.
Now, edit the pie chart.
You can view, Additional charting options icon. Click on it.
Now click on 3rd tab -> Interaction.
Select Navigate.
Add Navigation Target. Here, Browse the detail report and add the caption.
Here, you can add as many detail reports as you like.
I have created the same and added 3 different detail reports. It worked for me. Even, i used 10g.
I hope the same with you.
Award some points if it helps you and resolves your issue :)
Close the thread.

Drill down is not working in 3rd level of dimension hirarchy

Hi,
drill down is not working in 3rd level of dimension hirarchy,any issues. once i clicked on 3rd level it goes to detail level instead of going to 2nd level
thanks

any updates

2nd level of Drill Down

Similar Messages

Maybe you are looking for