2nd time in a month, my MBP has crashed

Over Thanksgiving my then 3 month old 15' MBP was faced with a blue screen soon after installing Leopard. I took it to an Apple Store the next week and after 6 hours in the store, they fixed it. They had never seen the problem before and actually found a coding error from the factory that was hidden while running Tiger but that made itself present when I ran Leopard, they rewrote code and fixed it. Some data was lost, but nothing crucial.
Tonight (12/28), I was watching a movie in Front Row (my computer constantly freezes in Front Row) and I paused it to get a drink. I came back, tried to unpause it and it froze. I shut my computer off and rebooted, and this same blue screen has returned and I am not able to get to the login screen, in regular nor safe mode. This will be the 2nd time in a month this has happened. I'm taking it to the Apple Store tomorrow but am not looking forward to possibly spending another 6 hours in the store. At what point will Apple simply replace such a new, and seemingly defective computer.

Who knows what other junk is left over from your Tiger installation?
I think you'll have to prove a hardware issue before counting on Apple to replace your Mac, and even then, they will just repair the defects with new parts.
You could probably save yourself a few hours if you can reinstall your OS from Time Machine. If Front Row continues to crash you have some other software issues to check. That's where I'd point the Apple Store.

Similar Messages

The case of my 7 month old mbp has started to get very hot within minutes of switching it on. Is this normal and is there anything I can do?hing

The case of my 7 month old mpb has started to get very hot within 2 or 3 minutes of switching it on. Is this normal and is there anything I can do?

The heat generated by the system is directly related to the load put on the system and the speed of the fans.
The former (high CPU load) generates heat, the latter (fan speed) dissipates it.
If your machine is getting hot then either some process is consuming lots of CPU power, causing more heat to be generated, or your fans are not working properly to dissipate whatever heat is being generated.
So the first question is whether your fans speeds kick into high gear or not? if they don't then it could indicate a hardware problem, either with broken fans, or with broken temperature sensors that control the fan speed.
If the fans do come on but the system is still getting hot then I'd look for a software issue - some process that's running rampant. It should be easy to spot with something like /Applications/Utilities/Activity Monitor. There should be a lot of processes listed, but most should use just a few percentage points of CPU power. If any process is using a lot of CPU power then it warrants some investigation - what is that process? should it be running? Is it failing in some way. Post the results of your Activity Montor report and I'm sure someone can chime in.

2nd time in 2 months, ipad 4 lost sound and shuts down too, advice?

Last month had to back up and reset a 5 month old ipad. One month later same issues but on addition, it switches off automatically from time to time too. I am not near a computer to back up.

I wouldn't necessarily call this a defect. When you restored the first time, did you afterwards restore to your backup of the device, or did you install/sync everything brand new? I don't recommend going back to a previous backup if this happened in the past.
If it randomly shuts down, make sure you don't have too many programs running at the same time, they could use lots of system resources without your knowledge and could drain your battery quickly or cause the system to crash. Close all down, aside from the one you are using, and see if that helps any with it randomly shutting off. This article shows you how, http://support.apple.com/kb/HT5137.
The sound could be a hardware issue, could also be software, so I would possibly trying:1. toggling the volume up and down. If it says "headphones" make sure there isn't anything stuck in the headphone jack. If there is, then try plugging in and unplugging headphones multiple times. If that doesn't help, take it to apple, I wouldn't try monkeying around with it, because you could get the dirt/dust further lodged in. 2. Make sure bluetooth isn't turned on, it may be trying to send the audio to some bluetooth device like a radio or headset. 3. Reset all settings (make sure you are ready to do this, it won't delete your data/contacts, etc., but it will set all apps back to their default settings, and wifi passwords will be deleted): go to settings>general>reset>reset all settings, then confirm you really want to reset them. Your ipad will reset and restart. 4. If those steps didn't help: restore the device to factory settings through itunes on your computer, then either re-download all data you want on there, or sync it from your computer (just make sure NOT to restore from a backup) 5. if right after restoring it to factory settings you still are not getting any sound, well, you're S.O.L. - kidding. You probably do have a hardware problem at this point, but apple can repair that.
this should help if don't remember the Restore steps
http://support.apple.com/kb/HT1414
let us know if any of those steps helped!

My macbook pro retina 2014 has crashed for the 2nd time in 2 mo

My macbook pro retina 2014 has crashed for the 2nd time in 2 months. Can't get past the gray/apple screen. The first time the genius bar tried all the different tricks to get it to boot all the way through, but in the end had to reinstall mavericks. They said there weren't any indications of it being a hardware issue after running diagnostics. The only possible reason is that it has something to do with some ProTools 10 plugins which I had downloaded in both occasions less than a week before. I don't believe that would be the issue and I'm guessing it's a hardware issue at this point. It's still under a factory warranty, so I'm not too concerned. Thoughts?

Try SMC and PRAM resets:
http://support.apple.com/en-us/HT201295
http://web.archive.org/web/20140711222006/http://support.apple.com/kb/ht1379
If no success, try booting into the recovery partition and select Disk Utility from the 4 option menu.
Run Disk Utility>First Aid, Verify and Repair.
Any Change?
Ciao.

While updating through my pc my x10 software has crashed

my internet lost its signal so there was a lapse in the time time of update then complete phone has crashed and it doesnt turned on furthur for which i have spent 1000rs in the service centre
pls provide an information which we can do on our pc.....

http://dl-www.sonyericsson.com/cws/download/1/110/61/1309763183/Update_Service_Setup-2.11.7.13.exe
download this and repair ur phone urself..
click on repair and the software will tell u what all u have to do.

Brand new ideapad u300s going into depot for 2nd time in in less than a month

Hi,
I can't seem to get any help on the phone, all I get told is send the unit in. I ask to speak to a supervisor and you tell me they will call back in 24-48 hours; it's been a week. I call back and ask to speak to a supervisor and you tell me it's the weekend and none are available, maybe we can have one call you back later. This is considered lenovo support.
I bought a computer for my wife's birthday, an ideapad u300s, and the first week everything is working great. However, the LCD turns out to be faulty. So we send it in to the depot thinking no big deal they'll fix it immediately and send it back to us. However, the computer sat in the depot for over a month and we heard nothing. We called tech support and asked a for a refund or a new unit but, basically, we were just transferred, told a supervisor would call us - which they did not - and given the standard answer that they would prioritize our situation. Finally, it's repaired and in the mail.
We receive the computer everything seems fine, then my wife notices that it doesn't recognize the a/c adapter so the battery is now drained and we can't do anything. We call lenovo again they tell us send it in, I ask for them to send someone here since last time I called you tried to sell me an extra warranty after I've only had the computer for a week. Lenovo tells me that's impossible if you want someone to come onsite we have to pay for it. Fine I give up I am tired of dealing with you over the phone I am sending the computer back for a 2nd time.
My wife has used the computer all of about 2 weeks and her birthday was in late March.
I cannot understand how you can operate like this; I've never experienced such poor customer support and general apathetic attitude of your phone reps.
Simply put, I will never buy another Lenovo product again; I am sure you don't care though if it's anything like your phone support.

It depends on how critical your connection is. Business customers get a much faster repair time, and are given priority over residential customers, and will pay compensation on some of their SLAs.
If you do not mind being without service for three to seven days, then the residential service should be fine, otherwise you should be on a business package, with a proper SLA (Service Level Agreement).
Its not simply the amount of usage you make of the service.
The residential service is aimed at the general public, who use it for web browsing, e-mail, gaming, and streaming services like YouTube.
You can get advise on this forum from other residential customers, but they are not going to be able to fix your faults, as this is only a customer to customer forum.
The firmware issue is discussed on a number of threads on the forum. Alternative VHDSL modem/routers are also suggested.
https://community.bt.com/t5/BT-Infinity-Speed-Connection/HH5-constantly-reboots-every-3-minutes/td-p...
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

I like and use Top Sites but it has become unsuable with this constant blacking out and reloading the thumbnails. My MBP has not seen a problem at all. I have been searching every other day for over a month trying to find a fix in Windows Safari with n

I like and use Top Sites but it has become unsuable with this constant blacking out and reloading the thumbnails. My MBP has not seen a problem at all.
I have been searching every other day for over a month trying to find a fix in Windows Safari with no joy. I want to resolve, not switch browsers. Please offer up a solution that only refreshes the Top Site thumbnails once a day or as some controlable interval. Started about two versions ago, now on ver 5.1.5. Windows 7 64bit.
Safari 5.1.5 for Win64 bit, Windows 7!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

I think I solved the wifi connection problem, just by switching off completely the router! sounds trivial, but in this case it worked!!!
the funny behaviour of the trackpad/cursor still persists. any suggestion???
thanks again

Hi!My 6 month old MBP 13" has suddenly stop charging.Mac is working,but not charging

Hi!My 6 month old MBP 13" has suddenly stop charging.Mac is working,but not charging

Troubleshooting MagSafe adapters http://support.apple.com/kb/ts1713
If you need to pursue further you can do it on-line, start here
https://selfsolve.apple.com/agreementWarrantyDynamic.do

Problems after downloading the lastest version of iTunes for my iPod Touch. Now whenever I switch on my laptop and access the internet I get an error message. 2nd time this has happened and I'm fed up trying to fix it. Anybody having similar problems?

I've downloaded iTunes 10.5 onto my iPod Touch, no problems but I've now got a constant error message on my laptop everytime I switch it on and access the internet. The message is "The procedure entry point xmlTextReaderConstName could not be located in the dynamic link library libxml2.dll"
This is the 2nd time this has happened. Last time iTunes Support called and we ran through a load of checks to no avail. The only option was to delete iTunes completely off my laptop and go for a new download of it. Can anybody tell me how to do it - didn't write it down last time, silly me, never thought it would happen again. Also sent an email to iTunes Support - waiting for a response.

Maybe:
"Waiting for changes to be applied": Apple Support Communities
Also I requested that your email address be deleted. Personal responses are not given in this forum

Kernel Panic occured when Macbook was off (2nd time this has happened)

Hey guys today I came home from work and I heard that my MB's fans were running. I turned it off last night completely (not sleep) and didn't turn it on in the morning before work. Also the sleep light was on (when the display was closed) and the computer was a little bit warm and the fans were blowing out warm air. This is the 2nd time this has happened, once with the original memory, and today's panic with the 2 1gb sticks of Patriot RAM I installed a couple days ago.
Any info on how to fix this problem or what I should do is strongly appreciated
Heres the kernel panic msg:
panic(cpu 1 caller 0x0019C9EF): Unresolved kernel trap (CPU 1, Type 14=page fault), registers:
CR0: 0x8001003b, CR2: 0x00000000, CR3: 0x00d3e000, CR4: 0x000006a0
EAX: 0x03634600, EBX: 0x03591cf0, ECX: 0x00000000, EDX: 0x00000000
ESP: 0x00000000, EBP: 0x24ad3da4, ESI: 0x0364f880, EDI: 0x00000001
EFL: 0x00010212, EIP: 0x00000000, CS: 0x00000008, DS: 0x03720010
Backtrace, Format - Frame : Return Address (4 potential args on stack)
0x24ad3c00 : 0x128b5e (0x3bbf84 0x24ad3c24 0x131bbc 0x0)
0x24ad3c40 : 0x19c9ef (0x3c13b4 0x1 0xe 0x3c116c)
0x24ad3cf0 : 0x197b8d (0x24ad3d04 0x24ad3da4 0x0 0x24ad0048)
0x24ad3cfc : 0x0 (0x24ad0048 0x370010 0x3590010 0x3720010)
0x24ad3da4 : 0x384d65 (0x364f880 0xe0000210 0x24ad3de4 0x38509e)
0x24ad3dc4 : 0x384f46 (0x364f880 0x0 0x24ad3e04 0x1)
0x24ad3de4 : 0x3863d7 (0x364f880 0x11 0x0 0x1)
0x24ad3e24 : 0x38644c (0x364f880 0x1 0x364f800 0x3ae14e)
0x24ad3e54 : 0x386621 (0x3595200 0x364f800 0x1 0x3aebfa)
0x24ad3ea4 : 0x387184 (0x3595200 0x1 0x24ad3ee4 0x388232)
0x24ad3ec4 : 0x38812a (0x3595200 0x0 0x24ad3ee4 0x38c8d3)
0x24ad3ee4 : 0x38e264 (0x3595200 0x3a0014 0x0 0x0)
0x24ad3f24 : 0x38341e (0x35c0440 0x388278 0x3a0014 0x0)
0x24ad3f54 : 0x59faed (0x3595200 0x3a0014 0x24ad3f74 0x19ca02)
0x24ad3f84 : 0x13d683 (0x0 0x0 0x0 0x0)
0x24ad3fd4 : 0x197a29 (0x0 0x0 0x4273920 0x3591cf0) Backtrace terminated-invalid frame pointer 0x0
Kernel loadable modules in backtrace (with dependencies):
com.apple.iokit.IOGraphicsFamily(1.4.3)@0x58f000
dependency: com.apple.iokit.IOPCIFamily(2.0)@0x580000
Kernel version:
Darwin Kernel Version 8.6.2: Thu Apr 13 18:48:29 PDT 2006; root:xnu-792.9.59.obj~1/RELEASE_I386
Model: MacBook1,1, BootROM MB11.005F.B00, 2 processors, Intel Core Duo, 2 GHz, 2 GB
Graphics: Intel GMA 950, GMA 950, Built-In, spdisplaysintegratedvram
Memory Module: DIMM0/BANK 0, 1 GB, DDR2 SDRAM, 667 MHz
Memory Module: DIMM1/BANK 1, 1 GB, DDR2 SDRAM, 667 MHz
AirPort: spairportwireless_card_type_airportextreme (0x168C, 0x86), 0.1.20
Bluetooth: Version 1.7.4f16, 2 service, 0 devices, 1 incoming serial ports
Network Service: Built-in Ethernet, Ethernet, en0
Serial ATA Device: ST96812AS, 55.89 GB
Parallel ATA Device: MATSHITADVD-R UJ-857
USB Device: Built-in iSight, Micron, Up to 480 Mb/sec, 500 mA
USB Device: Apple Internal Keyboard / Trackpad, Apple Computer, Up to 12 Mb/sec, 500 mA
USB Device: Bluetooth HCI, Up to 12 Mb/sec, 500 mA
USB Device: IR Receiver, Apple Computer, Inc., Up to 12 Mb/sec, 500 mA

I don't think you got a KP when the machine was off, but rather you may have closed the lid before the MB was fully powered down and it went into a sleep state.
Did you try running the Apple Hardware Test to see if the ram is bad? Since yo never had a KP before adding new ram, and the only change was adding said ram. My guess is that its the memory that is the cause.
I cannot vouch for patriot ram, but I suggest in the future you consider Crucial as its a higher quality ram.
Mike

2nd Time Capsule for redundant backup??

Currently use a 14 month old 1TB time capsule that's only about half full to do incremental backups for 2 MacBook laptops. I also use SuperDuper to create disk "clones" every month or so in case of drive failure.
I want a transparent / easy / painless backup (which I seem to have now), but am getting concerned about the Time Capsule problems I have been reading about. I know SuperDuper does incremental backups, but I like the version control that Time machine offers. I could lose a week's worth of data without too many problems, but more than that would cause quite a bit of grief to duplicate/reproduce.
I have been thinking about getting a 2nd Time Capsule, and swapping them out every week. My thought is, it would be easy to keep offsite at my office, adding another layer of protection. That after swapping out, the time machine backups would "catch up". It sounds ideal (though little expensive), but it would meet my "easy" criteria -- cables would be the same, so just unplug, plug back in and I'm done...
Big question -- will it work?
Additional questions: Same / different SSID/IP range? Problems with windows laptop, and WIFI printer?
Any input / suggestions / alternatives would be greatly appreciated!!!!

mike808ec wrote:
I know there are no guarantees in life, but I'm just trying to "hedge my bets". Is there a "verify" function available? Either as an option as part of the archive process, or a seperate run after the archive has finished.
Nothing built-in.
Alternatively is there a way to test the archive? You said i could attach the drive directly to my laptop. If I do this, and Time machine recognizes the archive does that mean it's "good", or could there be corrupted files within the archive?
You can browse them, even restore some things (probably to alternate locations), but that doesn't mean there isn't something corrupted there, somewhere.
You can also run +*Repair Disk+* (not permissions), to be sure the directory structure, etc., is good.
And, of course, a backup of a backup is only as good as the original backup; if something is wrong on your TC's hard drive (or your boot drive, for that matter), the copy on the archive will be, too.
I think this is my only hesitation to this solution. As I've said I've experienced bad / corrupted copies in the past when dealing with large file transfers. Shouldn't be a problem with a new drive, but as time goes by, and the archive grows and grows...
But you will continue the SuperDuper backups, too, right?

3 months old MBP & hard drive crashes - Does Apple really cares????

3 months old MBP hard drive simply crash and died on me, when sent to Apple centre the lady only concern is why didn't I purchase a apple care protection plan. Telling me other failures may result in costly replacement of parts and long lead time after warranty period. It seems to me Apple really cares is to make money and more of it.
I have been using PCs all my life, when the whole world was trying to stop me from getting a MAC. I went ahead believing that Apple have taken steps to improve their product. All my previous laptops works perfertly fine for at least 3 years. My reasoning is MBP cannot be such a lousy product that cannot last that long. Or is Apple confirming the truth that their MACs will not last their users anything more than 1 year thus encouraging users to buy additonal warranty.
The question is "Is Apple product so unreliable that we have to buy additional protection plan from day 1"
I hope some one can give me some answers, it is not about the money but the data that stores inside that has become too damaging for my business.

"Is Apple product so unreliable that we have to buy additional protection plan from day 1"
By no means. Don't take some salesperson's attempt to push AppleCare on you as any indication other than her personal opinion. Sometimes things break. It's unfortunate, but it happens. If things didn't fail, we wouldn't need warranties at all. And with electronic devices it's more likely to happen early in their life than it would be later. I might point out that Apple buys hard drives from the same companies that every other computer manufacturer does, so the hard drives have exactly the same chance of failure in a Mac as they would have in any other computer. And you have a one-year warranty on your computer so having the extended warranty at this point is irrelevant.
s Apple confirming the truth that their MACs will not last their users anything more than 1 year thus encouraging users to buy additonal warranty.
No more than any other company that sells an extended warranty for their product is saying that. If you want to purchase an extended warranty, it's up to you. The majority of computer owners, for almost any brand, never have need for a warranty at all, much less an extended warranty. But out-of-warranty repairs can be expensive enough - and again, this is true of any computer, particularly laptop computers where the components tend to be more expensive - that many people opt for extended warranties to ensure that for the duration of the extended warranty there will be no unexpected failures and consequent costs. It's like buying fire insurance for your house; the likelihood that your house will catch fire is small, but the cost involved if you don't have insurance is so great that I'd wager you do indeed have fire insurance if you own a house.
it is not about the money but the data that stores inside that has become too damaging for my business.
That's why you make backups. Any hard drive can fail. Or your laptop might get lost or stolen which would of course not be Apple's fault nor the fault of any of their component suppliers.
Message was edited by: Dave Sawyer

Firefox will not start; new profile fixes it for 1 time, then 2nd time its back to broken

Windows 7 x64, ff3.6.8
ff3 will not run, clicking on .exe will not begin any app in taskmanager. the most i get is when clicking ff3 from the taskbar in win7 it will flash as if it is trying to do something, but nothing happens and the flashing stops.
uninstalled ff3.6.5; reinstalled 3.6.8, still same issue.
i created a new profile and started ff3, ff3 started & i got to a generic home page. i closed ff3, copied my bookmark file from the default profile to the new profile, restarted ff3, same problem as in the beginning.
i created a new profile & again it starts up, but when i close out, even without copying the bookmarks over (i was assuming that was the corrupted file), it will not run the 2nd time.
i have done this for 7 profiles and all of them work the first time, but none will work after that even without copying any profile information from the original default profile.
in addition i cut all the profiles out of the profile folder and cc'd to another location on another drive thinking that'd prevent the default from corrupting the other files, nothing.
brief history(sorry for the long post)
I ran a windows update prior to leaving on vacation, shut the PC down & when I came back the pc wouldnt boot. reset my bios to default and finally got back into windows & it finished the update.
when i got back in, ff3 was giving me problems and kept hanging up for some reason. so i hard reset & tried to implement my OC profile in bios. i was not able to get back into windows w/ my OC profile again, so i again went back to default bios.
ever since then ff3 will not work. ie8 works fine, no viruses reported thru mse, i cant figure it out!
any help would be greatly appreciated, thanks.

well i kinda fixed it i spose...
i deleted everything in appdata under mozilla & macromedia and deleted the plugins folder from my installation folder for ff3. uninstalled ff3, reinstalled ff3. now everything works fine. just have to redo my bookmarks & settings.
sorry to waste anyone's time...but hopefully if someone else has the problem, now they can fix it. peace.

Error in sending mail 2nd time, Where is the fault- Help Please

Hi friends,
I had written a program to send mail. Everything is fine, when i send first time. But if I try to send mail 2nd time, It gives the error:
Exception in Connect: IOException while sending message
Here is the complete code what i had written, It successfully connects using t.connect();
the problem in t.send();
output on JBoss Console is :
Inside Action
After Transport t = session.getTransport(protocol)
before t.connect()
after t.connect()
Exception in Connect IOException while sending message
import java.io.*;
import java.util.*;
import javax.activation.*;
import javax.mail.*;
import javax.mail.internet.*;
import javax.servlet.http.*;
import org.apache.struts.action.*;
public class MsgSend extends Action {
     @Override
     public ActionForward execute(ActionMapping mapping, ActionForm form, HttpServletRequest request
               , HttpServletResponse response) throws Exception {
          response.setContentType("text/xml");
          PrintWriter out = response.getWriter();
          System.out.println("Inside Action");
            String to = request.getParameter("to");
         String bcc = request.getParameter("bcc");
         String cc = request.getParameter("cc");
         String subject = request.getParameter("sub");
         String user = request.getParameter("user");
         //String password = request.getParameter("pass");
         String message = request.getParameter("message");
         String from = user + "@domainname.com" ;
         /*Properties props = System.getProperties();
         props.put("mail.smtp.host", "smtp.vsginc.com");
          MailBean bean = MailBean.getInstance();
          Session session = bean.getSession();
          String protocol = "smtp";
          Transport t = session.getTransport(protocol);
          System.out.println("After Transport t =              session.getTransport(protocol)");
         MimeMessage msg = new MimeMessage(session);
         msg.setFrom(new InternetAddress(from));
         InternetAddress[] address = {new InternetAddress(to)};
         msg.setRecipients(Message.RecipientType.TO, address);
         if(cc != null ){
               InternetAddress ccAddr[] = InternetAddress.parse(cc);
               msg.setRecipients(Message.RecipientType.CC, ccAddr);
          if(bcc != null){
               InternetAddress bccAddr[] = InternetAddress.parse(bcc);
               msg.setRecipients(Message.RecipientType.BCC,bccAddr);
         msg.setSubject(subject);
         // create and fill the first message part
         MimeBodyPart messageBodyPart = new MimeBodyPart();
         messageBodyPart.setText(message);
         Multipart multipart = new MimeMultipart();
         multipart.addBodyPart(messageBodyPart);
         Attachment attachment = Attachment.getInstance();
         ArrayList<String> fileList = attachment.getFileNames();
         String parentFolder = null;
         for(String path:fileList){
              File attachmentFile = new File(path);
              messageBodyPart = new MimeBodyPart();
              DataSource source = new FileDataSource(attachmentFile);
              messageBodyPart.setDataHandler(new DataHandler(source));
              messageBodyPart.setFileName(attachmentFile.getName());
              multipart.addBodyPart(messageBodyPart);
              parentFolder = attachmentFile.getParent();
         // add the Multipart to the message
         msg.setContent(multipart);
         // set the Date: header
         msg.setSentDate(new Date());
         try {
              System.out.println("before t.connect()");
               t.connect(bean.getSmtpServer(),bean.getUsername() ,bean.getPassword());
               System.out.println("after t.connect()");
               //Error is coming here in this Line.
               t.sendMessage(msg, msg.getAllRecipients());
               * System.gc(); will relese the fileHandles, if some resource
               * still holds it.
               System.out.println("before System.gc()");
               System.gc();
               * Deleting All the Files from Attachment Folders.
              System.out.println("before attachmentFolder");
              File attachmentFolder = new File(parentFolder);
              System.out.println("Attachment Folder Name is : "+attachmentFolder.getAbsolutePath());
              if(attachmentFolder.isDirectory()){
                   File[] files = attachmentFolder.listFiles();
                   System.out.println("No of Files For Attachments are: "+files.length);
                   boolean deleteResult = false;
                   for(int i=0; i<files.length; i++ ){
                        deleteResult = files.delete();
                    System.out.println(files[i].getName() + " Delete Staus is :"+ deleteResult);
          System.out.println("All attachments Deleted");
          out.print("<result>Mail has been sent successfully</result>");
          } catch (Exception e) {
               out.print("<result>Mail sending failed</result>");
               System.out.println("Exception in Connect "+e.getMessage());
          }finally{
               t.close();
          return null;
Problem only comes, when i send 2nd time or more. What is the problem? Please help me out.
Thanks for your response in advance. One more thing, Whether to send a mail & receive a mail, we need to create different sessions. one for sending & one for receiving mails.
Message was edited by:
Ashish.Mishra16

I don't see anything obviously wrong in your code. Try adding
session.setDebug(true);
You can use the same Session for sending and for reading.
A Session just encapsulates your configuration parameters,
so as long as they're the same for both usages, one Session
is fine.

My macbook pro (August 2010) keeps freezing when apple mail starts up. This happens every 2nd time I turn on my Macbook Pro. This forces me to hold down the power button to restart my Macbook Pro. Does anyone else experience this, and is there a fix? Thx

My macbook pro (August 2010) keeps freezing when apple mail starts up. This happens every 2nd time I turn on my Macbook Pro. This forces me to hold down the power button to restart my Macbook Pro. Does anyone else experience this, and is there a fix? Thx.
since upgrading to OS lion, my mac book pro (2010 August) keeps freezing (non responsive, requires restart) when i turn on my mac and the system is trying to open apple mail. while apple mail is attempting to collect new mail, the macbook pro freezes. this happens every 2nd time i try to start up my computer. this only started happening after i upgraded to OS lion. please let me know what I need to do to fix this. being forced to restart every 2nd time i turn on my macbook pro has been very frustrating. not sure if apple mail is also the cause of my macbook pro for being very slow during start-up (on the occasion the computer doesn't freeze).

I am having similar 'freezing' problems with many programs (Mail, Safari, iTunes, etc.). I have done a clean install of Lion instead of an upgrade when it came out. Perhaps something went wrong with my install? I'm thinking about wiping and reinstalling.

2nd time in a month, my MBP has crashed

Similar Messages

Maybe you are looking for