3.0 should not have been recommended for original 3g iphone

This software is just too much for the original 3.0, it has slowed my iphone to an unacceptable pace. Can I revert back to the original software?
Message was edited by: Mark Livingston

My iPhone 3G 16GB (Japan) became also very slow over time after the 3.0 update.
There are many people complaining about the problem, this is a fact.
Was the phone reset/restore part of the Apple 3.0 update procedure? I don't think so.
Did Apple acknowledge the problem and provide any workaround or fix? Nothing.
Should we endure the pain to reset and restore / reconfigure the iPhone while Apple did not have a word on this yet?
Do as you wish... personally I
switched off Push (mail)
removed all Safari pages
turned off / on the iPhone
It got better - probably not as "fast" as with the previous firmware, but it is now "usable".
If it may help the developpers, here is the behavior I could observe:
from 3.0, switching keyboards (En/Jp) was much slower
writing (in En) was sometimes very slow (typing "Hello" would show H then after 3 seconds e, then after another 3" the l, then "lo" came faster.
Tapping the input areas would sometimes take ages to start
starting apps would take longer sometimes, much longer some other times
scrolling of lists (songs for instance) was less smoother
[Maps is sometimes wrong by a large margin while GPS (blue sky above) was used (was already the case with 2.1... just a reminder .
Note: no problem with the battery (seems better)
Message was edited by: ring_0

Similar Messages

[svn] 2472: remove flex4. swc - should not have been checked in as it gets produced during the compile

Revision: 2472
Author: [email protected]
Date: 2008-07-14 13:21:25 -0700 (Mon, 14 Jul 2008)
Log Message:
remove flex4.swc - should not have been checked in as it gets produced during the compile
remove StyleProperty.vm - it is no longer used
Removed Paths:
flex/sdk/trunk/frameworks/libs/flex4.swc
flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/as3/StyleProperty.vm

My daughter has had her Razr for about 9 months now. About two weeks ago she picked up her phone in the morning on her way to school when she noticed two cracks, both starting at the camera lens. One goes completely to the bottom and the other goes sharply to the side. She has never dropped it and me and my husband went over it with a fine tooth comb. We looked under a magnifying glass and could no find any reason for the glass to crack. Not one ding, scratch or bang. Our daughter really takes good care of her stuff, but we still wanted to make sure before we sent it in for repairs. Well we did and we got a reply from Motorola with a picture of the cracks saying this was customer abuse and that it is not covered under warranty. Even though they did not find any physical damage to back it up. Well I e-mailed them back and told them I did a little research and found pages of people having the same problems. Well I did not hear from them until I received a notice from Fed Ex that they were sending the phone back. NOT FIXED!!! I went to look up why and guess what there is no case open any more for the phone. It has been wiped clean. I put in the RMA # it comes back not found, I put in the ID #, the SN# and all comes back not found. Yet a day earlier all the info was there. I know there is a lot more people like me and all of you, but they just don't want to be bothered so they pay to have it fix, just to have it do it again. Unless they have found the problem and only fixing it on a customer pay only set up. I am furious and will not be recommending this phone to anyone. And to think I was considering this phone for my next up grade! NOT!!!!

[svn] 1931: the ja_JP swc' s should not have been removed from the locales package, I' m adding them back in

Revision: 1931
Author: [email protected]
Date: 2008-06-03 13:30:46 -0700 (Tue, 03 Jun 2008)
Log Message:
the ja_JP swc's should not have been removed from the locales package, I'm adding them back in
Modified Paths:
flex/sdk/trunk/build.xml

Hi Manny1/mreider,
First, I’m sorry to hear that you two may be having issues utilizing a recently purchased Gamers Club Unlocked (GCU) Gifting Card.
In all reality, our stores don’t even need to exchange the Gifting Card for the standard GCU card, although that option should be available to you if absolutely needed. The GCU Gifting Card can be applied to your My Best Buy membership by simply following the directions on the back of the card.
Thanks for sharing your feedback and I hope for a much better experience when you return to your local Best Buy to get this taken care of! If needed, please don't hesitate to ask for a manager or supervisor.
Brian|Senior Social Media Specialist | Best Buy® Corporate
Private Message

[svn:fx-trunk] 7787: this should not have been checked in.

Revision: 7787
Author:   [email protected]
Date:     2009-06-12 09:24:18 -0700 (Fri, 12 Jun 2009)
Log Message:
this should not have been checked in. This will fix the build.xml
bugs: no
qa: no
checkintests: pass
Modified Paths:
    flex/sdk/trunk/frameworks/build.xml

My Bionic does not work properly. The phone should not have been released...dead Camels

I took my Bionic back to Verizon yesterday. I am not getting 4G data, and it will not work in the car dock. When I got to the store, I had 4G, and it worked perfectly in the dock, all he did was sit it in. This phone must only work in the store, maybe that is why they released it before it was ready.
The Verizon technician told me that there were problems with the phone, but that the responsibility belonged to Motorola. He said there was going to be an update in November and that I should wait. This concerns me because it means Verizon will pass the buck on this one.
What choice do I have? My return period is way over. I am paying for a service that I don't have yet I can't get out of it. If the phone can't be fixed by a software update, then what? At that point, I will either hope for a class action suite, or cancel my contract and pay $350 so that I can get a decent phone....iPhone from AT&T. That would be cheaper than buying a new phone from Verizon under my current contract. I can't keep a phone that never works.
I think yesterday was like the straw that broke the camel's back for me. I tried for 15 min to get the car dock to work, and nothing would turn it on. That is when I just drove to Verizon. I figured they should see one more unhappy customer in person instead of just online...alas, no one there gave a **bleep** and they are still trying to sell the Bionic to the unsuspecting customer. It should be pulled off of the shelf until it is fixed.
Joey

techwhiz wrote:
Verizon and Motorola didn't have the time to test the Bionic.
They were too busy working on the Razr and screwing us.
PRE-ORDER YOUR DROID RAZR TOMORROW 10.27 8AM EDT
Introducing DROID RAZR by Motorola.
The ultimate power of DROID. The legendary edge of RAZR. Combined to form the world's thinnest 4G LTE smartphone.
• Android 2.3 Gingerbread OS
• Dual-core 1.2 GHz processor
• KEVLAR® strong back plate, Gorilla® Glass face
• 7.1 mm thin with big 4.3 inch Super AMOLED Advanced display
My Bionic did it again. It is not recognizing the car dock, and it is not getting data connection. I sat in a La Madelains for 15 min hoping for data. Then, when I drove home, I tried the car dock...nothing. This is basically a little 3G tablet with WiFi and a phone. I can do most of that better with my iPad.
Joey

Ip[od wqas removed from pc when it should not have been

Hi guys is this bad, as the ipod is dead or can this be fixed
cheer
P

ALL - I tried what you are suggesting, and it "technically" works, but you still end up bouncing back and forth from the left side of the page (where the TV series are) to the right side of the page (where the episodes are). It is completely annoying...
Apple, if you are listening, you should be able to scroll WITHIN THE BOX on the left, and then see the episodes on the right.
I appreciate the suggestions, at least it is a work around, but not at all what one would expect from a new release.
NOTE TO APPLE:
I bought into your marketing, have purchased huge amounts of content, so dont penalize me for it by making me jump up and down my screen like a Jack-in-the-box whenever I want to add content to my iPhone or iPad.

HT4914 Do i have to subscribe to itunesmatch in order to delete a song thatwas downloaded and should not have been purchased?

Do i have to subscribe to itunes match to remove two songs from icoud?

You don't have to subscribe, you can hide songs via your computer's iTunes so that they don't show in Purchased for redownloading : http://support.apple.com/kb/HT4919 (with apps and iOS 7 I've been needing to log out and back into my account on my iPad after hiding them on my computer for them to then be hidden on it, not sure if the same applies to music)

ITunes 11 should not have been released with this extreme a bug.

When I plug in my iPad, and try to add content from the TV Shows section, you cannot scroll past the fist 10 shows. It just sticks. When you use the arrow keys, it goes off the page, so you can't see which show you are on, and even though the episode list shows on the right for which ever show you are on (thought you cant see it),but then the title is off the screen.
This is HUGE and way beyond something Apple should have caught. I am a huge apple fan, but totally disgusted at the moment. Are other people experiencing this issue?

ALL - I tried what you are suggesting, and it "technically" works, but you still end up bouncing back and forth from the left side of the page (where the TV series are) to the right side of the page (where the episodes are). It is completely annoying...
Apple, if you are listening, you should be able to scroll WITHIN THE BOX on the left, and then see the episodes on the right.
I appreciate the suggestions, at least it is a work around, but not at all what one would expect from a new release.
NOTE TO APPLE:
I bought into your marketing, have purchased huge amounts of content, so dont penalize me for it by making me jump up and down my screen like a Jack-in-the-box whenever I want to add content to my iPhone or iPad.

Songs should not have been uploaded, but matched

Hi!
Why is it many songs of my library were uploaded to iCloud, instead of being matched? When I check this songs in iTunes Store, there they are. Why iTunes uploaded them in this case?

Hi,
Have a read at this user tip. https://discussions.apple.com/docs/DOC-4113
Jim

Why do I have to pay for a charge that I should not of been charged then wait for the credit in two to three billing cycles? If I don't pay it I get charged $5 a month late charge?

So I spent a considerable amount of time on the phone with Verizon about charges on my wireless bill. The conclusion of it was: Pay the charge and we will credit the charge or it will show as a balance due with a $5.00 late fee every month. I got two phones on a promotion in November. Part of the promotion was no activation fee. Got my first bill and a $70.00 activation fee was on it. On line chatted with Verizon and they said it would be credited in two to three billing cycles. I paid my bill minus the activation fee. This month I have a $5.00 late fee and a $35.00 restocking fee because they messed up and sent three phones and I returned one. It was not activated. They might credit me that money back. What is going on?????

I am so very sorry for any aggravation you've experienced getting your billing straightened out, Nunu1957. It's true that it can take 1 to 2 billing cycles for some account balance adjustments to appear on a statement. While I know you'd rather not have paid your activation fees, the terms of your agreement do require you to do so in order to avoid late fees or even involuntary service interruptions.
I am concerns about the restock fee. If the device was sent to you in error, you should not have been billed a restock fee. You stated that there may be a refund for the fee. Has that been confirmed?
DionM_VZW
Follow us on Twitter www.twitter.com/vzwsupport

Should I have a shell for the iPhone 5?

should I have a shell for my new iPhone 5 ?

Entirely a personal decision (and I assume you mean a case). I know from my own history that I am tough on cellular phones - mostly scratches, but the occassional drop as well - since I tend to keep my phone in a jacket or pants pocket. So, I bought a case. I would prefer to use the iPhone without a case, but not willing to take the chance. You may be different.

Hardware changes might not have been detected

Hello,
I am getting the error message "hardware changes might not have been detected" for five days now. Using HP Pavillion g6Notebook PC/Product No. : D8Q59EA#ABF running OS Windows 8 (not wanting to upgrade to 8.1)
After Windows automatic security and KB updates, and HP update, five days ago I started having error messages when trying to watch videos online. Video would start and five seconds in 'black-out' with error message 'unable to play video' imbeded in video itself. I then noticed sound abscence on my laptop and noted that although all sound controls are at proper settings, there is no sound. Device manager is showing NO exclaimation marks or warnings. HP Action center is saying 'no issues' and Control Panel automated fix tools are all coming back as 'unable to fix problem', OR, when running troubleshooter in CP for hardware and devices getting the "hardware changes might not have been detected message". I have tried using a restoration point to before issues began, which temporarily fixes the sound issue but it then goes off again. Same with 'HP recovery' option for 'drivers', temporary fix that does not remain. Tried 'system restore' from a restoration point just done where sound WAS working but even that, once done, quickly lost the sound. Tried Microsoft onliine auto fix tools and they too are unable to fix the problem. Windows updates all up to date, no 'optional updates' available other than Bing Desktop and Microsoft Silverlight, both of which I do not want or need. Drivers all up to date it appears, including with HP Updates. Intuitively it feels as if the drivers are up to date, recognized and functioning, but then 'something' is 'disconnecting' their recognition/functioning, IF it is in fact even a driver issue. I have been reading for several days and narrowed it down to that. Seen a few articles re the EXACT same problem referenced on an OS Windows 7, but not ONE where a solution that fixes the problem exist! Thank you in advance for your help and please advise if further details are required. I have added no new hardware recently, or ever, in fact to my laptop, only Kaspersky Pure MANY months ago and it is working perfectly without conflicts. Thanks again.
Copy of error message:
the troubleshoot says that "hardware changes might not have been detected"
i do not know what hardware it regards with... just that statement was found,,,,,
WHEN I VIEW THE DETAILED INFORMATION ......
(this was the exact statement when i visited the troubleshooting report)
Hardware and Devices
Publisher details
Issues found
Hardware changes might not have been detected
Hardware changes might not have been detected
Detected
Scan for recent hardware changes
Completed
Potential issues that were checked
Windows Update configured to never install drivers
Windows Update configured to never install drivers
Driver updates aren't automatically installed when detected by Windows Update.
Issue not present
Issues found
Detection details
6
Hardware changes might not have been detected
Detected
Scan for recent hardware changes
Completed
Scanning might find new devices attached to your computer and install them.
Potential issues that were checked
Detection details
Windows Update configured to never install drivers
Issue not present
Driver updates aren't automatically installed when detected by Windows Update.
(this was the publisher details)
Hardware and Devices
Use hardware and access devices connected to your computer.
Package Version:
1.1
Publisher:
Microsoft Windows
Hardware and Devices
Use hardware and access devices connected to your computer.
Package Version:
1.0
Publisher:
Microsoft Corporation

Hi RedmoonWolf,
Bit of a puzzler of an issue for sure. And you're right, there's very little out there in terms of similar error messages, and how to fix them.
I would consider going to the Windows Update window, and noting which ones went through lately. Then, another place to start first might be to go back to that same restore point again, and this time halting the automatic updates.
Once that is stable again, try updating any browsers you use, and also Adobe flash, as a lot of videos work off of that.
Secondly, before doing any more updates, go ahead and run the system file checker - might be something that it'll catch and fix: http://support.microsoft.com/kb/929833
Finally, if all is going alright, create another restore point, and then try the updates again, hopefully this time around they'll work
*** If my reply was helpful, please click on the "Kudos Thumbs-Up" on the right, as a way to say "Thanks!".
If this reply also fixed your issue - please click the "Accept as Solution" button, so that others can find the same answer. ***

I have been paying for two edge agreements for the past 3-4 months AND i have not gotten a reimbursment for anything...

10/11/2013
Debit Card Transaction
VERIZON WRLS 08253-01 800-9220204 CA 10/09
$92.30
On October 11th I started an EDGE agreement for the NOTE 3. I make a $92.30 payment over the phone (which is listed above). The lady said it would arrive two days after the phone comes out. It didn't show up two days after it came out and my little Droid X went dead on me. I called customer service and asked if the phone has been shipped yet. They said it has not. I asked if I could pick it up in the store instead. They said yes. They said they would cancel the shipment so I can pick it up in the store. I end up going to the store at Torrance Crossroads and I was just about to get the phone. Then sales rep was trying to force me into buying the case and charger package that was a deal with the phone for $100.I said no and he got hurt and quiet over it. 5 minutes later he comes up to me saying the edge agreement is not cancelled and they can not give me the phone. I asked if there is anything he can do or call customer service and verify because customer service told me it could be done. He said no and walked away.
I call customer service and they say that they stopped the order and told me to go back to the store and try again. I did not wanna see the sales rep at Torrance Crossroads so I go to another Verizon store on hawthorne blvd in Torrance. I try the same process and the same thing happens. I tell them to call customer service and verify what is going on. I wait for 2 hours while they talk to customer service and the financial department. They tell me they will start another edge agreement on my girlfriends line and give me the note 3 so I can use it on my line. They said they waved the fee through some promotion since I went through a lot of trouble getting the phone and I should be getting a check in the mail for the $92.30 I paid on 10/11/13.
Ever since then I have been paying for two edge agreements at $29.16 a piece. I have also been paying an extra $8 for insurance on a note 3 that I do not have. I have not gotten reimbursed the $92.30 I paid on 10/11/13. I have been calling customer service since December and have not gotten any where. Today was the last straw when the guy put me on hold and I ended up getting transferred to the sales department... What should I do? Is there anyone that can actually help my situation out. I already suspended my line and will do so for the next 5 months until this is fixed.

@Dakotaep
I am so sorry to hear of your experience with purchasing your new Samsung Galaxy Note 3! This definitely should have been resolved in your first call to us. I would be glad to review your account and ensure the Edge Agreement is corrected. Please accept my "Follow" request and send me a direct message so I can further assist. Thanks!
AnthonyTa_VZW
Follow us on Twitter VZWSupport on Twitter.

Errors in the high-level relational engine. The data source view does not contain a definition for the table or view. The Source property may not have been set.

Hi All,
I have a cube in which i'm using the TIME DIM that i created in the warehouse. But now i wanted a new measure in the cube which is Average over time and when i wanted to created the new measure i got a message that no time dim was defined, so i created a
new time dimension in the SSAS using wizard. But when i tried to process the new time dimension i'm getting the follwoing error message
"Errors in the high-level relational engine. The data source view does not contain a definition for "SSASTIMEDIM" the table or view. The Source property may not have been set."
Can anyone please tell me why i cannot create a new measure average over the time using my time dimension? Also what am i doing wrong with the SSASTIMEDIM, that i'm getting the error.
Thanks

Hi PMunshi,
According to your description, you get the above error when processing the time dimension. Right?
In this scenario, since you have updated the DSV, it should have no problem on the table existence. One possibility is that table has been specified for tracking in the notifications for proactive caching, but isn't available any more for some
reason. Please change the setting in Proactive Caching into "MOLAP".
Reference:
How To Implement Proactive Caching in SQL Server Analysis Services SSAS
If you have any question, please feel free to ask.
Best Regards,
Simon Hou
TechNet Community Support

Powerview Cannot connect to the server due to a security issue. The server may not have been able to match the host for silverlight

Hello,
I have a sharepoint 2010 sp1 CU Dec 2011 server with a SQL Server 2012 SP1 CU4 reporting services instance. I am able to open Power View and use it normally when bypassing the ISA Reverse Proxy server. However when going thru ISA I receive the
following Error.
Power View Cannot connect to the server due to a security issue. The server may not have been able to match the host for Silverlight. This error appears after I click yes on an Internet Explorer Display Mixed Mode prompt.
I've seen a couple references to this issue but not much. This one mentions a clientaccesspolicy.xml file but I haven't had any luck with that. http://connect.microsoft.com/SQLServer/feedback/details/716433/cannot-connect-to-the-server-due-to-a-security-issue-the-server-may-not-have-been-able-to-match-the-host-for-silverlight
Any Ideas? Thanks.
Ryan

Hi Ryan,
Based on my research, the issue should occur due to a by design behavior in Threat Management Gateway (TMG). To work around this issue, you can use SSL between the TMG and the SharePoint Web Server.
Hope this helps.
Regards,
Mike Yin
TechNet Community Support

3.0 should not have been recommended for original 3g iphone

Similar Messages

Maybe you are looking for