3.2.x Admin & Client is buggy - US keyboard on intl. systems

Strange. When I control a client older than 3.2.1, it now starts with US keyboard and this hampers login with a german system.

While there may be other programs that allow control with admin keyboard mapping... I don't know if you could get it included with a plea via feedback or not.
As I see it, and I'm guessing Apple does. Taking remote control just puts you in front of the client computer. To remap the keyboard (while most likely possible) would be modifying the remote users settings.
Wouldn't the simple solution be to have the Input Menu turned on the Menu Bar in the International Control Panel? Then as soon as you assume control, just mouse over and change the layout to German and change it back on exit.

Similar Messages

BPC 7.5 Admin Client Links Not Working

I am working in BPC 7.5 SP15 NW. I have recently upgraded to Windows 7 64-bit and now the links in the action pane in the desktop admin client are not working. The cursor does not change from the nornal pointer to the hand. That would indicate that the admin client is no longer recognizing them as links. The links work fine in the desktop Excel client. I am using 32-bit Excel 2010 with no other version of Office installed.
Has anyone heard of this behavior and how to correct for it?

Hi Kannan,
i think this is a Osoft web site configuration issue, the error indicates that you have one duplicate section in the web site configuration file (web.config).
If you didn't alter the web.config file then the problem may occur because when you use framework 4.0, the machine config already has some of the sections defined that were used in previous ASP.NEt versions.
You should check which version of the MS Framework is configured for the application pool of the web site, change it to v2.
Let me know if this solves the issue. Or if you need more help to resolve it.
Kindest regards,

"System cannot connect to the application server" (Admin Client only)

Hello Experts,
I have a strange issue: I am getting "system cannot connect to the application server" when I am trying to launch BPC Admin.
I successfully connect to the same application server with Excel client on the same PC.
I am able to connect via Admin from another PC.
The installation in question is a new installation. The only difference between my PC and a troubled one is IE7 vs. IE8 - IE8 is the one giving issues.
BPC site is in Local Intranet zone. Windows Authentication is enabled. What am I missing? Local Policy? IE8 settings? Folder permissions (I'm local admin on both PCs)?
It's BPC 7.5 SP05.
Thanks in advance,
Akim
P.S. OS: Windows Server 2003 SP2 32-bit (Citrix box).
Edited by: Akim Zubarchuk on Mar 30, 2011 12:28 AM

Hi Akim,
Check client diagnostic for admin client can provide good information.
Any way if you are able to connect with excel client not with admin client I will say:
1. Check the rights of user used to connect with admin console
2. Check proxy settings
3. Disable antivorus or firewall into that computer.
4. Make sure the installation of admin client was correct done.
In my opinion it is a big probability to be point 3 or 4.
Regards
Sorin Radulescu

Dump Error when I open 'Member access Profile' in Admin client

Hi,
We have recently performed DB-Refresh.
In Admin client: when try to create a user and assign the user to team it throws the error: "Object Reference not set to an instance of an object".
There are no 'Member Access Profiles' and when we click on 'Member access Profiles' it throws a dump error.
We have the issue with APPSHELL as well. I've deleted and re-created the APPSHELL but still same issue.
Please let me know how to resolve this issue.
Thanks

Whenever you see dumps on accessing the security profiles/ cannot add/modify users..
it is usually a mismatch with the BPC Server, BPC CLient (on your machine) with .NET server.
Please check the BPC server version, and go to the installation doc for that SP, you will find the relevant client and .NET versions to go with the Server version..
Hope this helps..

Unable to login to the Admin Client

Hi Experts,
Need your help on below mention issue.
My client was using BPC MS 10.0 SP5 and I upgrade it to SP13, everything was installed correctly without any error. After installation I restore their production environment (which was built in SP5) into the upgraded server (Sp13). While testing it I figured that I am not able to login into the Admin Client though I can login into the Excel and run the reports without any issue.
The admin client is also updated with latest version. (10.0.13.0)
Any idea ?
Thanks,
Charly

Hi Charly,
try to login in the admin console with the user-psw of the sysadmin you used to install bpc it should be possible and after enter in security, modify one user and save it (just enter and save without changes).
Probably you have to enter in IE as another user (using the sysadmin).
Regards
Roberto

3.1.1 NSM AD Admin client shows all events as "(n) Unkown Event State"

Just noticed that that admin client shows all events as "(n) Unkown
Event State" , where n is some integer between 0-25.
Everything else seems to work fine.
Any ideas what could be going on?
Regards,
Petri Asikainen

On 11/27/2013 3:40 AM, Petri Asikainen wrote:
> On 26.11.2013 16:30, NFMS Support Team wrote:
>
>>
>> Did you recently upgrade the NSM Engine?
>>
> Yes, Or I reintalled it after failed disk driver upgrade.
> Engine had engine startup problems after that, but reintalling it
> got engine running again.
>
>
Petri,
Check that /var/opt/novell/storagemanager/engine/data/strings.db exists
and has the same rights as the other .db files in that directory. We've
occasionally seen issues where an upgrade (using rpm -U) causes problems
with that strings database file. (strings.db stores descriptions for
error codes and event states; if it's missing or inaccessible the Engine
won't fail in any way, but NSM Admin will be unable to access any
descriptive strings for errors or events.)
If you need to, you can attempt to re-install on top of the Engine with
"rpm -U --force".
-- NFMS Support Team

Regarding mountain lion server: clients experience intermittent service connections. the server system log has the following error- Client handshake failed (6):113: Server not accepting client connections (any ideas???)

regarding mountain lion server: clients experience intermittent service connections. the server system log has the following error- Client handshake failed (6):113: Server not accepting client connections. any suggestions would be greatly appreciated - thank you

Hi Jason
I was getting the same behavior after Apple support had me delete some plist files to get Airplay going. I was also getting the following error:
the error occurred while processing a command of type 'writesettings' in the plug-in 'server vpn'
I went into ~/Library/Preferences/ and /Library/Preferences/ and deleted every plist contating the word server. I had to re-set up my server (meaning walk through some intial steps) but all of my settings were still there after that and everything started working again.
Just a thought, obviously try at your own risk but it worked for me.
Kellen

Multiple clients to be connected to One BI system

Hello Experts,
have to work on a tricky requirement.
We have already connected one client (say R/3-100) to BI system.We are already running the deltas for the Logistics applications in BI production for this source system clent (100).
Now the requirement is that we need to connect 4 more clients (say R/3-200,300,400,500) to the existing BI system.We need to take care of the existing delta and INIT for the LO-application for client100.
My Doubts are :
1) As datasources are client independent so do we need to activate the datasources (like 2lis*) in all clients one by one? or just activating in one client will make it ?
2) If we replicate the datasources for new clients in BW side and then want to reload the data from New clients (set-up tables filling and INIT)?would it have an affect on existing deltas (for datasources 2lis*)for existing Source client 100? What shud be the precautions? How we can proceed?Please let us know your opinons plz..
thank you,
Balji

1) As datasources are client independent so do we need to activate the datasources (like 2lis*) in all clients one by one? or just activating in one client will make it ?
You need to activate the datasources individually for all the client. If you will activate in one client, it will be specific to that only
) If we replicate the datasources for new clients in BW side and then want to reload the data from New clients (set-up tables filling and INIT)?would it have an affect on existing deltas (for datasources 2lis*)for existing Source client 100? What shud be the precautions? How we can proceed?Please let us know your opinons plz
If you will replicate in one client system, it wont affect delta and init from other client.
One thing you can do, to identify data from different source systems, you can use source system compounding in your infoobjects. Make sure you are not loading data from both the client at the same time. it may lock the DSO and master data.

But My client want restriction of BOM change from system.

Dear Friend,
My client every now and then BOM is changed. We are changing BOM using Engineering change. But My client want restriction of BOM change from system in plant level/ Material Level. For Example For One month no one should change the BOM.
Please suggest me how to proceed.
Regards,
Sanjay

Hi Sanjay,
Another potential solution, to avoid changing authorisation:
Create a new transaction, based on the standard one. Add some coding to restrict access based on a table (you will need some ABAP coding here).
You can then develop your own logic.
For sure you need to give access to the new transaction and remove access from the standard one (check first feasibilty with your authorisation team)
Thanks and Regards
Julien

Enter Admin Password or Power On password. The System Disable number is [ 59568624 ]

3) Enter Admin Password or Power On password. The System Disable number is 59568624

Please enter : 46440200 Steps to be followed:1. Use the unlock code posted above to enter the BIOS2. Disable all passwords that are enabled3. If asked for current password - type the unlock code4. For new password, just press ENTER key5. Repeat the same for verify password column.6. Then leave the BIOS by saving & exit option to save the changes. Troubleshooting:Incase if the Password doesn’t work please try a Hard Reset as follows.1. Shut down the notebook2. Unplug the AC Adapter and then remove the battery3. Hold down the Power button for 30 seconds4. Plug in the Power/AC Adapter (Leave the battery out for the moment) & Start the Notebook5. If you now see a password box, Please type the same password I shared before & press enter Hope this helps, for any further queries reply to the post and feel free to join us again **Click the White Thumbs Up Button on the right to say Thanks**Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem. Thank You,K N R KAlthough I am an HP employee, I am speaking for myself and not for HP

Remote Admin Client

We have upgraded from SCCM 2012 sp1 to SCCM 2012 R2. We can open the admin tools on the server with no issues. The problem is with the remote client which will not connect. I have uninstall and reinstall. It connects first time it's opened, but
when I close and re-open it will not connect has anyone had this issues?. We are running windows 8.1 and this issue only happens with the remote client which was install from the CD. I recieve the error below
The Configuration Manager console cannot connect to the Configuration Manager site database. Verify the following:
      •   This computer has network connectivity to the SMS Provider computer.
      •   Your user account has Remote Activation permission on the Configuration Manager site server and the SMS Provider computer.
      •   The Configuration Manager console version is supported by the site server.
      •   You are assigned to at least one role-based administration security role.
      •   You have the following WMI permissions to the Root\SMS and Root\SMS\site_<site code> namespaces: Execute Methods, Provider Write, Enable Account, and Remote Enable
Best regards, Wayne

Hi,
Since the error indicates that it cannot connection to site database, you can test with UDL file:
http://blogs.technet.com/b/michaelgriswold/archive/2014/01/06/the-easy-way-to-test-sql-connectivity.aspx
And please also verify the other items in the message.
AdminUIlog may also help in this case.
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Admin & Client Simultaneously?

This may be a daft question, but may help me decide whether or not to purchase ARD.
I run a home office network of six Macs, which I would like to administer with ARD. I would wish to use my G5 as admin when at home (bigger screen, comfier chair at desk!). When I travel I take my PowerBook with me and it would be really helpful if I could use this as admin (over the net) to support the network.
Can I use the PB as both client and admin. in this way, or would I be better off just using it as admin permanently?
Thanks.
David

I will never want to "run/use" the ARD admin from the PB and G5 at the same time. If I am at home I will run it from the G5, whilst travelling from the PB.
That doesn't matter. The license for ARD is not a "simultaneous use" license. It only allows a copy of ARD to be installed on one computer at a time. So legally, if you want to install it on two computers, you have to have two copies.
will the mere existence of the software on two networked machines constitute a licence infringement?
Yes, exactly.
In any case, unless your home network uses "real" (that is publicly accessible) IP addresses, rather than gettting IP addresses from an NAT device. running ARD from outside your network wouldn't be effective anyway since in that case you can only fully access a single system at home (since you can only forward the IP ports ARD uses to a single system). So keeping the ARD administrator on your G5 and taking control of it from your PB via VNC (or Timbuktu if you want something commercially supported) will work better in any case.
Regards.

Hyperlinks in Web Admin Client not working | BPC 10

Hi all
We are running:
BPC10
SP 13
IE9
Office 2010
2 of our admin users have been haviing problems with the 'Launch' menu on the homepage of the BPC web interface homepage.
This happens several times per day and in different environments. but there does not appear to be a pattern which might cause this. Once the problem happens (no links can be launched in the launch menu) the user has to log off and then back on. The user is trying to click the link "Planning and Consolidation Administration" when this happens
Has anyone else experienced this problem ? Any suggestions on how to fix / capture the error ?
Thanks
Ian

Hi Bishwajit
I can only really send you a screenshot of the admin launch panel where none of the links are clickable.
Any ideas ?
Ian

Error Installing Oracle 8.1.6.0.0 Admin Client

I am new to Oracle and I am having an issue installing the administrator client programs on my Desktop. Machine is configured as follows.
Win2k SP1
Dell Latitude PIII 650 Laptop
256 MB Ram
When I run Oracle Universal Install it gets to the point where it's "processing" all of the components. I then get a popup error box that states the following.
Title: Error
Message:
There was an error during load library: RunningProcessQuery
I then have the option to stop processing of this component or all components. The status bar on the top always stops at 82% where it is processing the "Net8 Client". There is a RunningProcessQuery.jar file on the CD, so I am assuming that this is some Java error (gotta love Java). I had a bunch of versions of Java VMs installed on my machine, however, removing them did not help. I was able to get past this error on this same laptop using Win98 (dual boot) and on several other machines running Win2k and Win98.
I also tried booting in safe mode, but received the same error. I am at the point where I may have to reinstall the OS to get this installed unless someone has some suggestions.
TIA

Thanks for the reply.
Unfortunately I've been there and done that. Skipping this component takes me to about 5 or 6 others that fail with the same error. I was able to then continue and install some components, however, nothing appeared to work. Shortcuts were there, but they pointed nowhere and even the icons were standard windows .exe icons.
Installing just the client also gives me these errors.
Looks like I need to reinstall the OS. Not looking forward to it since I have about 3 GB worth of software to install and a lot of customization to do.

HELP: Synchronization between Disc Plus/Viewer/Admin/Client

Can anyone explain this to me: changes in end user layers in admin edition and reports in desktop edition aren't showing up in disc plus and viewer (using the same schema). I've even deleted business areas that are still showing up in disc plus!!

This could be a problem with diferent versions of discoverer. You can check the version of discoverer and the version of the EUL that it's using innthe help menu. For Example Discoverer 3.1 EUL it's Diferent from Disco 4 EUL and so on.
Hope this Helps. I think you're right. On the server I'm running 4.1.3.7, but on my desktop I installed the latest and greatest that came with the 9i Dev Suite release 2 and had to upgrade the EUL when I ran the admin edition. Do you know if Discoverer Plus/Viewer are compatible with 9i Dev Suite discoverer edition? If so, is there any configuration that needs to be done to have it synch with this latest discoverer release?
Thanks.

3.2.x Admin & Client is buggy - US keyboard on intl. systems

Similar Messages

Maybe you are looking for