3 cfselect with "loading please wait" information

Hi
I have 3 cfselect boxes bind to a component. 2nd select box
is depend on the 1st and 3rd is depend on the 2nd.
Its taking much time to load the select boxes and before
loading all the information user is submitting the page, giving the
errors. and not only that if the internet is slow, its taking much
time to load the data.
So for this i want to display the word "page loading please
wait..." how can i do this? can I do this in CF or i need to use
the seperate AJAX for displaying it.

If the amount of data is reasonably small, you might be
better off getting it all when you first create the page and using
js to control the selects.

Similar Messages

How do i reverse a download? the little center is turning & it says "loading, please wait". it's been doing this for several hours & I don't know how to stop it.

I was downloading add ons; i let it wait until i left the site to load, but it's been running & showing the center spinning & "loading, please wait; it's been doing this for several hours & i don't know to stop or disable it

There is a rectangular white box between the top & bottom of the screen with no buttons on it. The wheel turns with 'loading, please wait'. There is a little arrow on the upper left with 2 green & gold 'men'. When I click on it this message shows up on the screen "Please accept the Terms of Service first (Add a social network). The only way I can get the wheel to quit turning is to go to 'tools' & click on options & it stops turnning. I already had a yahoo, facebook & twitter accounts, so I don't know what to do.
I've checked in my Control Panel & there is nothing with Firefox in there. If I can't resolve this can someone tell me to how to unload all of this & start over.
Thanks.

How to send a 'loading, please wait...' message to user

My web application needs to load about 1000 item names to screen. It takes about half a minute before the names are returned.
While waiting, the screen is blank and user wouldn't know what's going on. Is there a way to send a first page ('Loading,please wait...')to the browser, and then desplay the result page after the procedure completed.
I searched in this forum before posting but didn't get help. I'm pretty new in this area, please help me.
Thanks.

By clicking a button. It's like a principal logins to school site, the first page he/she sees is student name page, the page is a big dropdown down list with all the student names in this school.
I tried some javescript but didn't work. I think the problem could be:
1. it takes time to get data from table and generate a html doc.
2. it takes time to display the page.
Reason1 is main problem and any javascript won't work at this step.
Any suggestions, please?

I cant register cloud on my 58L4300U "loading, please wait" message comes up and does nothing

So i bought this TV for myself just yesterday, and after goign through all the setup, i pressed the cloud button to get into cloud. it takes me to the introduction step, where i have to set device name, icon, wallpaper, and then the next step is to create account.
BUT when i set my device name and press next, a message "Loading Please wait" shows up on the top left corner of the screen for maybe about 10 seconds. Then the message goes away, and guess what. Nothing happens.
Im literally stuck at this stage, can't proceed and cannot use cloud service!
called toshiba support and ended up talking to a guy name Ringo in the philliphines. wtf...
He tells me that this is a known issue and they are doing what they can do to fix this.
I searched this forum and seems like i am the only one having this issue...
I need help. or this TV is going back to the store.
thanks,

Hey man,
Check the forum post here.
http://forums.toshiba.com/t5/Televisions/65L7300U-device-profile-settings/td-p/562970
I was experiencing the same thing along with another guy on here. Appears to be a Cloud Server issue, but waiting to hear a reply from Toshiba as to remedy/resolution to issue.

UWC - Firefox stuck at "Loading: please wait..." when logging in

I have UWC installed in a Webserver 6.1 web container on Solaris 10 x86. I can log in no problem with IE but if I try to use Firefox/Mozilla/Netscape it hangs at "Loading: please wait..."
Has anyone else seen and resolved this issue? Any help would be appreciated.

Hi,
Patch: 118541-21 Obsoletes: 117288-99, 117820-13,
119157-07 Requires: Incompatibles: Packages:
SUNWuwc
Patch: 118541-42 Obsoletes: 117288-99, 117820-13,
119157-07 Requires: Incompatibles: Packages:
SUNWuwcA good start.
After doing this I patched MS to:
[opt/SUNWmsgsr/sbin]# ./imsimta version
Sun Java(tm) System Messaging Server 6.2-8.04 (built
Feb 28 2007)
libimta.so 6.2-8.04 (built 19:20:35, Feb 28 200Did you run through the post-patch install steps as per the patch README? (patch-config;install-newconfig)
Now when I try to start the http service it fails:
[opt/SUNWmsgsr/sbin]# ./start-msg http
Connecting to watcher ...
Starting http server ..... failedWhat happens when you restart messaging server entirely?
./stop-msg; ./start-msg
What does the http log report?
Regards,
Shane.

BO4 - Select .unx says Loading - please Wait then blank screen

Hi,
As Administrator can create reports fine against .unv universes in WEBI.
If select .unx screen does nothing.
Just says loading please wait and blank screen.
.unx imports fine in IDT.
Any ideas?
Thanks

The icon, I believe is for the voicemail APP, Visual Voicemail, that carries a subscription charge - it is not the same as your *86 standard voicemail.
http://support.verizonwireless.com/clc/devices/knowledge_base.html?id=55911 shows the icon (is that what you are seeing?) and http://support.verizonwireless.com/clc/devices/knowledge_base.html?id=56168 gives details on activating Visual Voicemail. If yo uonly have standard voicemail, then : http://support.verizonwireless.com/clc/devices/knowledge_base.html?id=55976 is how you access it.

OVM manager 3.0.3.546 locked up with message "Please wait while system is initializing"

Hi ,
I am receiving this message on any actions on OVM manager.
and AdminServer.log with this message
####<Aug 16, 2013 9:26:16 AM EST> <Warning> <com.oracle.ovm.mgr.model.ModelEngine> <serverneame> <AdminServer> <Odof Tcp Client Thread: /127.0.0.1:54321/101> <<anonymous>> <> <0000K24Ij5W5yWNLuIP5iX1I3MCB000002> <1376609176392> <BEA-000000> <Object 'null<500739>' got an unexpected rollback Lifecycle State.DELETING>
As soon as this message occur the discovery process is stopped and OVM manager lock up with the "Please wait while system is initializing" message.
any ideal?

Perform the following procedure to recover the management functionality OVM manager.
> 1) stop ovmm service
> # service ovmm stop
> 2) backup OVM3DB database
> # ovm_upgrade.sh --export --dbuser=ovs --dbpass=<ovspassword> --dbhost=<db host> --dbport=<db port> --dbsid=<sid/schema>
> 2) delete the database OVM3DB
> # ovm_upgrade.sh --deletedb --dbuser=ovs --dbpass=<ovspassword> --dbhost=<db host> --dbport=<db port> --dbsid=<sid/schema>
> 3) Restart ovmm service
> # service ovmm start
> 4) Login into the manager and re-discover your Servers and Repositories.
Back to business

A pop-up window accesses an URL comes up with a "Please Wait" message but does not show the document it is meant to access. this worked fine in the previous version of Firefox. Please help,

the URL in question has been allowed in Pop-up blocker.
This is a major problem as I am trying to access Contract Notes and it is therefore extremely important that i get a very quick solution to this problem.

Do you have that problem when running in the Firefox SafeMode?
[http://support.mozilla.com/en-US/kb/Safe+Mode]
''Don't select anything right now, just use "Continue in SafeMode."''
If not, see this:
[http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes]

Boot up of Windows Server 2012 Essentials seems slow (extended Please Wait screen) and there are errors in Health Report

Dear Sir or Madam,
I have been experimenting with the evaluation version of WS2012e trying to get the installation and subsequent build into an optimal set up, and once I have everything I want it to do mapped out, I'll set it up with the full version with using the key that
I bought.
However, I've noticed that the server seems to experience a delay during cold boot - it sits with a Please Wait screen for about 60-90 seconds before it presents the screen with an option to Log on. I have also discovered from running Health
Report, that there are some entries in the event logs which appear to coincide with start up times, and which seem to be interconnected to each other in the issues they are describing, and I have copied an example of one of those health reports below.
I assume that everything sorts itself out in due course, because the events say the process will be re-attempted and these errors don't repeat again after the system has booted up. I also have the server set to suspend when not in use with the Lights
Out add in, so it shouldn't need to cold boot often - but I wondered if there's a way to correct these errors so that they don't hold up the boot up process? I'm also concerned that these errors will cause me later problems with storage pools and
the like at a later date - the disk replication one seems particularly worrying. Alternatively, are these errors just a normal part of the start up process - the timing of when different processes start relative to each other - and can be safely ignored?
In trying to understand what the events describe, I thought that WE2012e acted as its own Domain Controller, and yet it seems from the event log entries that it is waiting for another server to respond to AD / DC requests (but there isn't another server
on my home network). The other thing I remember from when I first tried out WS2012e, is that it took control of DHCP or DNS from the router, and I found that frustrating when waking up my laptop and it wouldn't connect to the internet until the server
had fully booted up and re-asserted its network settings. Is this another symptom of the same problem? I remember seeing a posting at the SBS Diva's site about how to update the server so that it gave connected PCs a backup option for connecting
to the internet when the server wasn't available, and was going to try to find that again to see if that helped.
By way of background - there isn't another server in my home network. This is an attempt to do a clean install onto the same hardware that I ran the initial trial of WS2012e, now that the trial has expired, so I'm not trying to migrate from an existing
server. I moved all the data on the trial server off onto an external disk, with the intention of importing it back once I had the Storage Pools set up the way I wanted on the new build, and since I didn't want to keep anything else about the server
trial. Am I correct in thinking that I don't need to go down the Migration route during installation, and can go through a Clean install in this circumstance?
I'm running on an Asus P8-H77-i motherboard, with an i5-3470s CPU and 16MB RAM, and I have WS2012e installed on 256Mb SSD formatted under GPT with uEFI boot - the latter being the main reason for the reinstall, instead of just giving the Evaluation
version the new key on the original MBR set up. I've also enabled Intel Rapid Storage and Rapid Start - and successfully set aside the hibernate partition on the SSD - but discovered that this is about forcing a hibernate after suspend, allowing
the system to power down until its needed again, and then resuming from hibernate on the SSD rather than cold boot each time. That seems to work, but doesn't improve the cold boot times at all, which was what I was hoping for - ideally the way my
laptop will boot from cold in a few seconds into Windows 8.
Yours faithfully,
Avon
======
Health Report extract.
Critical Errors in Event Logs in Last 24 Hours
DFSR
Event ID: 3221226674
The DFS Replication service failed to contact domain controller to access
configuration information. Replication is stopped. The service will try again
during the next configuration polling cycle, which will occur in 60 minutes.
This event can be caused by TCP/IP connectivity, firewall, Active Directory
Domain Services, or DNS issues.
Additional Information:
Error: 160 (One or more arguments are not correct.)
Last occurrence: 26 May 2014 18:51:28
Total occurrence(s): 2
DNS
Event ID: 2147487661
The DNS server is waiting for Active Directory Domain Services (AD DS) to signal that the initial synchronization of the directory has been completed. The DNS server service cannot start until the initial synchronization is complete because critical DNS
data might not yet be replicated onto this domain controller. If events in the AD DS event log indicate that there is a problem with DNS name resolution, consider adding the IP address of another DNS server for this domain to the DNS server list in the Internet
Protocol properties of this computer. This event will be logged every two minutes until AD DS has signaled that the initial synchronization has successfully completed.
Last occurrence: 26 May 2014 18:51:15
Total occurrence(s): 2
ADWS
Event ID: 3221226674
This computer is now hosting the specified directory instance, but Active Directory Web Services could not service it. Active Directory Web Services will retry this operation periodically.
Last occurrence: 26 May 2014 18:51:08
Total occurrence(s): 2
NTDS General
Event ID: 2147486534
The security of this directory server can be significantly enhanced by configuring the server to reject SASL (Negotiate,
Kerberos, NTLM, or Digest) LDAP binds that do not request signing (integrity verification) and LDAP simple binds that
are performed on a cleartext (non-SSL/TLS-encrypted) connection. Even if no clients are using such binds,
configuring the server to reject them will improve the security of this server.
Some clients may currently be relying on unsigned SASL binds or LDAP simple binds over a non-SSL/TLS connection,
and will stop working if this configuration change is made. To assist in identifying these clients, if such binds occur this
directory server will log a summary event once every 24 hours indicating how many such binds
occurred. You are encouraged to configure those clients to not use such binds. Once no such events are observed
for an extended period, it is recommended that you configure the server to reject such binds.
For more details and information on how to make this configuration change to the server, please see http://go.microsoft.com/fwlink/?LinkID=87923.
You can enable additional logging to log an event each time a client makes such a bind, including
information on which client made the bind. To do so, please raise the setting for the "LDAP Interface Events" event logging category
to level 2 or higher.
Last occurrence: 26 May 2014 18:51:00
Total occurrence(s): 2
=======

Hi KerguelanAvon,
Based on your description, it seems to be hard to narrow down the cause of this issue. Please refer to following operations and monitor the result. It may help us to go further, and then solve this issue.
1. Please refer to the following article and troubleshoot slow boot.
New Slow Logon, Slow Boot Troubleshooting Content
2. On your server 2012 essentials, please start a BPA scan and fix all that it can find, then monitor the result.
Regarding to those critical Errors in Health Report, please perform
Dcdiag on the server. Meanwhile, please refer to the following article and troubleshoot network connectivity, firewall setting and AD DS issue.
DFSR Event 1202 (DFS Replication)
Hope this helps.
Best regards,
Justin Gu
Hi Justin,
I'm reading through the links you referred me to but it's taking a while. In the meantime I tried running BPA as you suggested. I'm sure when I ran it before, it didn't say much beyond 81 checks completed, and I couldn't find a way to get any
more detail.
Now it says
Problem:
The DNS client is not configured to point only to the internal IP address of the server.
Impact:
If the DNS client is not configured to point only to the internal IP address of the server, DNS name resolution can fail.
Resolution:
To resolve this problem:
1. From the client computer, open the Properties page for the network connection.
2. Make sure that DNS is configured to point only to the internal IP address of the server.
Except that it is.
Connection-specific DNS Suffix:
Description: Broadcom 802.11n Network Adapter
Physical Address: ‎00-1B-B1-28-AE-63
DHCP Enabled: Yes
IPv4 Address: 192.168.1.133
IPv4 Subnet Mask: 255.255.255.0
Lease Obtained: 03 June 2014 21:56:49
Lease Expires: 05 June 2014 20:24:20
IPv4 Default Gateway: 192.168.1.1
IPv4 DHCP Server: 192.168.1.1
IPv4 DNS Server: 192.168.1.49
IPv4 WINS Server:
NetBIOS over Tcpip Enabled: Yes
Link-local IPv6 Address: fe80::80ef:48d5:9fde:f10e%14
IPv6 Default Gateway:
IPv6 DNS Server:
I'll try rebooting from the current windows 7 build over to windows 8 on my dual boot laptop, to see if that makes any difference, since it is the only other client PC connected to the server at the moment.
Thanks, Avon.

Please Wait Screen

I'd like to impose a 'please wait' screen between 2 JSP pages. I have a jsp page that prompts the end-user for reporting parameters, such as begin-date & end-date(and others). The user clicks a submit button which links to another jsp page that actually runs the report. The report page calls a bean that calls some Oracle packages, which in turn formats the results in an HTML table. Depending on the report parameters, it can take several minutes to generate the report (millions of rows possible). I want to have some kind of intermediate page with a please wait message, so the user doesn't get impatient and start clicking around, thinking that nothings happening. I have teenage daughters, I know the impatience routine all too well.
I thought about using a forward declarative, and an include, but based on the doc I've read, it doesn't look like they would work. Any ideas where I could go with this.
Should I have the destination page try to display the please wait screen, or should the caller display the screen and wait for the destination to catch up?
I'm still fairly new to JSP, but not new to programming (20+ years). Any help would be appreciated.

Try using a wait page by putting this code at the top level of your page
if ( session.getValue( "waitPage" ) == null ) {
     session.putValue( "waitPage", Boolean.TRUE );
     // I have the WAIT_PAGE constant defined in an external file...it's just
     // the html string that builds the "loading...please wait" message
     out.println(WAIT_PAGE);
     out.close();
}else {
     session.removeValue( "waitPage" );
     //     End of logic for displaying the wait message
     //     build your page in here

ITunes 7.2: "Please wait while Windows configures iTunes" on every startup

I am running into the some issue. With all of the problems everyone else is running into with the 7.2 install - I am happy that this is all I have going on - but it is getting irrating. EVERY time I start iTunes I get the windows installer starting with the "please wait while Windows configures iTunes."
I have uninstalled, used a reg cleaner, reinstalled with 7.2.0.35. QT runs without issues. I am not sure where to go from here.
When I ran the install - i had the windows installer create a log. I found the following error in it:
Action start 13:15:02: AppSearch.
Info 1402. Could not open key: HKEYCLASSESROOT\pcast. System error 5. Verify that you have sufficient access to that key, or contact your support personnel.
Action ended 13:15:02: AppSearch. Return value 1.
I ran the installer as Administrator so permissions should have been covered.
Any help would be appreciated.
BigGuy
PS - forgive the spelling <smile>
Dell Inspiron Windows Vista Black 60G iPod

I’ve tried the indicated solution and it didn’t work. I gave full permissions for Administrators, my user (which is an Administrator) and Everyone, for every single key and sub-key. It didn’t work.
Then, I deleted the .pcast. When I opened iTunes again it came back without the permissions again.
How long it will take for Apple’s programmers to correct this garbage? I’ve read several forums where people reformatted their computers to make it work again. This is simply unbelievable! I’m using the last version (7.4.2.4). I’ve found people complaining since version 7.2.x.
Ah! I forgot. Of course, the problem is the Windows Vista.

OBIEE(11.1.1.6.8) dashboard prompts "Please Wait" Problem after the automatic upgrade of browser

Hi all,
We have a problem in OBIEE(11.1.1.6.8) dashboard prompts after the upgrade of Chrome browser.. The values of dashboard prompts are not shown to user ( with message "Please wait" ) We had this problem in Internet Explorer 10. So we had announced the users to have minimum browser versions Chrome 12+ , Firefox 17+ , Internet Explorer 9.x as its is declared in certification matrix. Now after upgrade (automatically)in Chrome version 30.0.1599.101 m , we have the same problem and the only working browser remaining is Mozilla Firefox. What should we do to prevent this without upgrade or patch ? Is there any workaround ?
Thanks ...

OBIEE problems with Chrome (update 30) plus patch

"Please Wait" Message Box

Hello!
I´d like to know what´s the best way of creating a message box
with a "Please Wait" message that opens at some point and closes
automatically after a sequence code?
Thank you!
Luanna

Are you having a pop up message box in mind??
my suggestion would be, keep a string indicator on front panel itself, make it appear and disappear like this
Attachments:
please wait.vi ‏22 KB

CFSELECT With XML Forms

I'm using cfselect with a "Please select..." option before
the query is displayed. This all works fine except my option as a
value="" which get translated in the rendered HTML as option
value="""" when what I want is a CF [empty
string].
Any thoughts how to return a empty string?
TIA

The following code returns an empty string as you can see
from the struct output:


<cfquery name = "GetAllEmployees" dataSource =
"cfdocexamples">
SELECT Emp_ID, EMail, Phone, Department, FirstName,
LastName, FirstName +' '
+lastName as Name
FROM Employees
GROUP BY Department, Emp_ID, EMail, Phone, FirstName,
LastName, FirstName
</cfquery>
<h2>cfselect Example</h2>

<cfif IsDefined("form.employeeid")>

<h4>You Selected the following employees</h3>
<cfif form.employeeid IS "">

<cfoutput query="GetAllEmployees">
#name#<br>
Email: #email#<br><br>
</cfoutput>
<cfdump var="#form#">
<cfelse>

<cfquery name = "GetSelectedEmployees" dbtype="query">
SELECT Emp_ID, EMail, Phone, Department, FirstName,
LastName, FirstName
+' ' +lastName as Name
FROM GetAllEmployees
WHERE Emp_ID in (#form.employeeid#)
</cfquery>

<cfoutput query="GetSelectedEmployees">
#firstName# #lastName#<br>
Email: #email#<br>
<br>
</cfoutput>
</cfif>
</cfif>

<h3>Select one or more employees</h3>
<cfform action = "#CGI.SCRIPT_NAME#" format="xml">

<cfselect
name = "employeeid"
size = "1"
multiple="yes"
required = "No"
query = "GetAllEmployees"
group="Department"
display ="name"
value ="emp_id"
queryPosition="Below" width="100">

<option value = "">Select All</option>
</cfselect>
<cfinput type="submit" name="submit" label="Go"
value="Go">
</cfform>
struct (cfdump) output
EMPLOYEEID [empty string]
FIELDNAMES EMPLOYEEID,SUBMIT
SUBMIT Go

ZEN M300, first use and "Please Wait..." message continuously on the screen

Hello,
I just bought a ZEN m300 mp3 player. I first attached it to my computer to charge the battery and some music, succesfully. Then after disattached it from my pc, it is locked with a "please wait..." message on the screen. I tried to turn it off, reset it, reattached to the pc,.... But nothing happened, still locked.
Anybody knows this problem or how to fix it's Thx so much, I m impatient to use it....
Bye

Sara,
This is what is in the link:
Solution ID: 9589ZEN Style M300/M00 Player is Freezing
Keywords / Key Phrases: player is freezing, hanging, please wait, not responding, unresponsive
Summary:
Applicable To: ZEN Style M300 (DVP-FL007), ZEN Style M00 (DVP-FL008).
Refer to this article if the ZEN Style M300/M00 freezes or whenever the player shows "Please Wait..." message and becomes unresponsi've.
If the player freezes when you access the microSD card, refer to Solution ID 94626: Troubleshooting Micro-SD Card Issues for ZEN Style M300/M100
Perform any of the following troubleshooting steps if the player becomes unresponsive:
Reset the player. Poke the Reset button using a straightened paperclip or a ballpoint pen.<
Perform a Clean up on the player. To perform a Clean up, refer to Solution ID 9373: Accessing the Recovery Mode of ZEN Style M300/M100
Format the internal memory using the player. Formatting the player will erase all files so make sure to perform a back up first. Refer to Solution ID 9373: Accessing the Recovery Mode of ZEN Style M300/M100 for instructions on how to format the player.
Format the player using Windows Explorer. For detailed steps, refer to Solution ID 6774: How to Format ZEN Style M Series using Windows Explorer.Last Updated: July 29, 2011

3 cfselect with "loading please wait" information

Similar Messages

Maybe you are looking for