310-055 which chapter need for study?

Hi,
I am prepare the exam for SCJP 310-055. Just want to confirm the chapter that is important and will come out from the exam.
The exam objective for 310-055
Section 1: Declarations, Initialization and Scoping
Section 2: Flow Control
Section 3: API Contents
Section 4: Concurrency
Section 5: OO Concepts
Section 6: Collections / Generics
Section 7: Fundamentals
if i reading SCJP Sun Certified Programmer by (Katherine Sierra ),
is it all chapter i have to study? Or i just concern from chapter 1 -10 only?
Chapter 1: Declarations and Access Control
Chapter 2: Object Orientation
Chapter 3: Assignments
Chapter 4: Operators
Chapter 5: Flow Control, Exceptions, and Assertions
Chapter 6: Strings, I/O, Formatting, and Parsing
Chapter 7: Generics and Collections
Chapter 8: Inner Classes
Chapter 9: Threads
Chapter 10: Development
Chapter 11: Introduction to the SCJD
Chapter 12: Coding Standards
Chapter 13: Clarity and Maintainability
Chapter 14: Designing the Graphical User Interface
Chapter 15: Networking Issues
Chapter 16: Database Issues
Chapter 17: Exam Documentation
Chapter 18: Final Submission and Essay
Sybex.Complete.Java.2.Certification.Study.Guide by Philip Heller
& Simon Roberts and SCJP Sun Certified Programmer by (Katherine Sierra, which one is more suitable to study?
Philip Heller & Simon Roberts seem like more complicated.
Need advice, thanks for reply.

Sorry Leelavathi , i think you misunderstanding me, because i get the "SCJP Sun Certified Programmer for Java 5 Study Guide " book in PDF format. So i not sure will chapter will cover in the exam
Currently i refering this book and other book "cSybex.Complete.Java.2.Certification.Study.Guide by Philip Heller"
And jwenting have give me the answer. Thanks for your reply.

Similar Messages

I am able to get color images in the continues shot but when i try to snap a color image which i need for my processing i get only a monocrome image

I have been using lv_vfw.llb VI's for grabbing images from a CREATIVE WEB CAM ,i am able to get color images in the continues shot but when i try to snap a color image which i need for my processing i get only a monocrome image ,i have been trying to play around with the RGB weightings but i am unable to get a color iamge,it shall be of great help if you could help me in doing this as it is urgent for me.Thanks for your help.

vicky,
I am unfamiliar with the lv_vfw.llb, and have not used it before. However, I noticed that you stated that you are able to grab in color, just not snap in color. If this is the case, why not just perform a grab and then extract a single buffer from this grabbed data, which would likely be in color? This seems like a possible solution to the issue that you are seeing.
Other than that, I really don't know enough about the lv_vfw.llb to be of much help on this issue. Hopefully another member of this forum will be able to assist you with this software.
Regards,
Jed R.
Applications Engineer
National Instruments

My iPod is up to a 4.1 ios, and it won't update to a 5.1 which I need for some of my apps for school. It keeps saying that my internet connection is bad; but, it works just fine. What do I need to do?

My iPod is up to a 4.1 ios, and it won't update to a 5.1 which I need for some of my apps for school. It keeps saying that my internet connection is bad; but, it works just fine. What do I need to do?

If you get a network timeout error, then disabling the computer's security software duirng the download and update usually resovles that error.
If that is not the error what is the wording of the error message.
Note that only a 3G or 4G iPod can go to iOS 5. A 2G iPod can only go to iOS 4.2.1

I couldn't get my maps to work while out today which I needed for directions anyone know why ? It kept saying no server .

I couldn't get my maps to work while out today which I needed for directions anyone know why ? It kept saying no server , is it to do with my settings, my network provider, 3G or what ? Anyone help please.
Thanks

Yes it is about 40 mg - I didn't know there was a size limit? How can I change that?

Urgent need for Study Materials for 1Z0-114 certification

Hi All,
I would be taking up the Oracle SOA Foundations, Adoption and Implementation(1Z0-114) certification next month. For study materials & free dumps I did some search over the net but with no luck yet. Can somebody please point me towards the right direction from where i can get these. Also for reference which text books should i follow? Many thanks..
Regards,
Tripz

>
Hi All,>
I would be taking up the Oracle SOA Foundations, Adoption and Implementation(1Z0-114) certification next month. For study materials & free dumps I did some search over the net but with no luck yet. Can somebody please point me towards the right direction from where i can get these. Also for reference which text books should i follow? Many thanks..>
Regards,
TripzThe first thing the certification candidate needs to understand is there is basically no such thing as right direction and +(brain)dumps
The dumps to be found on the net, and from most non approved supplied, are non authorized learning material:
See: [http://blogs.oracle.com/certification/2009/05/the_route_you_choose.html]
So if you use or continue to search for dumps you will be cheating.
The post {message:id4015916} seems to refer to some useful books.
The thread {thread:id=833598} appears to be useful, and has been reviewed by the Certification forum moderator.
Edited by: bigdelboy on 02-Feb-2010 22:40 (typos)

Which flash need for iPad 1

WHich flash player need for ipad1

Flash is not supported on any iOS devices - entirely Apples decision. If you want to view Flash content, you need Adobe AIR or downlaod the stuff as an compiled applet, which most games or such do...
Mylenium

Which downloads do I need for studying these certifications?

I'm studying for the following certifications:
Oracle Database: SQL Certified Expert
Oracle Database 11g Administrator Certified Associate
Oracle PL/SQL Developer Certified Associate
Oracle Forms Developer Certified Professional
Oracle Advanced PL/SQL Developer Certified Professional
I have downloaded the followings:
Oracle Database 11g Release 1 (11.1.0.6.0) for Microsoft Windows (32-bit)
Oracle Database 11g Release 1 Documentation Library
Which other downloads do I need?
Thanks.

pcsql wrote:
Thanks bigdelboy. I'm completely new to Oracle. Does Oracle provide some sample databases (not just data structure but with data also)?Yes, as Justin Previously described.
You are probably trying to look at too much at once. It is probably better to concentrate on becomeing familiar with some SQL from a training and practice viewpoint, then going over details towards an SQL certification.
Do NOT concentrate 1z0-047 first, but rather 1z0-051 (or 1z0-007). But its usually better to get some practice with the product first.
Remember an oracle database will take a fair bit of resource on your machine. There is an express edition [http://www.oracle.com/technology/products/database/xe/index.html] whcih has some merits for learning and has a smaller footprint, though it is only available for 10g not 11g (And do not confuse with application express which is a different product)
Standard Oracle Product downloads are available from [http://www.oracle.com/technology/software/index.html]
SQL practice/training.
If you are not swamped already I would be surprised.
I would acutally start by getting some basic SQL practice ...
[http://www.w3schools.com/sql/default.asp] is a what a understand to be certificaction safe website that will do this ... be aware there are a lot of certifiaction unsafe websites out there.
(Read also [http://blogs.oracle.com/certification/2009/05/the_route_you_choose.html])
Remember practice, experience and knowledge are utlimately better than certifications, and a certification study is one vehicle to help gain practice and knowledge.
Though understandably lack of a certification may disadvantage you from getting a job.
Rgds - bigdelboy
Note: You should also ensure you have access to sql-developer : Tutorial Here: [http://st-curriculum.oracle.com/tutorial/SQLDeveloper/index.htm]
Edited by: bigdelboy on 11-Jul-2009 01:47 (sql-developer)
Edited by: bigdelboy on 28-Jul-2009 01:57

Execute Teststand as windows-user: which files needed for write-access

Hello,
which files/directories do i have to set for write access?
Normally windows-administrator can access everything.
But a windows-user has for example no write-acces to teststand\Cfg.
So sometimes i get the error-message that a file is write protected.
Is this somewhere explained in the TS-documentation that also a windows-user need write-access? I have this question from a client and i am not sure how exactly it is.
Thx for info
Message Edited by OnlyOne on 07-10-2009 05:36 AM

Hi OnlyOne,
With TestStand 4.1 and later, we changed the directories for the TestStand Cfg folder and the TestStand Public folder (formerly called the TestStand Users Directory). These changes allow a normal Windows-User to write to the TestStand Cfg and Public folders without having to specifically grant write permissions.
Manooch H.
National Instruments

Which Computer needed for High Def video

I purchased a Panasonic HDC-TM900 High def camcorder and don't have enough computer power to edit the video. Which computer or how much processor power do I need.
thanks

Hmm....
what software did the camera come with?
What does the manual/documentation say for computer requirements?
Yes, I do encourage i7 or quad-core for best performance
Budget a few hundred gigabytes of hard drive space for render space for hour long projects
I like 7200rpm drives
If you are getting paid for your work, don't hesistate to double or triple your budget.
Have you considered a high-end gaming laptop to showcase your work or work right at your clients? I do my work on a gaming laptop and it's much more rewarding to showcase my work and make edits on the spot with a client.
Again your camera is capable of 3D. Don't limit your hardware to 2D.
With regards to software
I like Pinnacle Studio for raw performance and excellent interface when I'm trimming clips.
I like Avid Studio for Picture and Picture. Pinnacle is limited to 2 video streams.
I like Corel VideoStudio Ultimate (still learning it) for 3D support
Seriously research and look for a local demonstation of Matrox MXO2. If you are making money on your projects, being able to render and post your videos with the shortest amount of time with make you more attractive to a client. It also frees up your personal time.
Panasonic's camera is still kinda new, you are going to need to research if products identified supports your camera.

Conflicting info on which version needed for G4

First, thanks to all the frequent posters here. I'm very impressed by the knowledge in this forums. I've learned a lot, but still haven't found my solution.
I ordered a processor upgrade for the G4 (Sawtooth). The instructions say to first update the firmware to 4.2.8, if necessary. I'm supposed to check the current version by using Apple System Profiler after booting into OS9. I bought this 'puter used, with 10.2.8 installed, and no OS9 installed. I've never used OS9.
I did get a gray "PowerMac G4 Software Install SSW version 9.0" CD with the purchase. When I tried to boot from that, I get a welcome screen, and when the progress bar gets to about 15%, the process simply stops. (The CD drive has been replaced with a DVD RW, if that might matter.) Now, an Apple article (120068) regarding the firmware upgrade says to use 9.1. But, I just want to boot into 9 to check the current firmware version, not update it (yet). From what I've read here, I thought this machine should be bootable by 9.0. I even ran across an Apple table somewhere here stating the multiple versions of 9 that were permissible for this G4, including 9.0. (I almost suspect that the update has already been done by the previous owner, as he was a savvy user, and did A/V production with it. It's also been working under Tiger flawlessly.)
I also tried dragging a copy of the 9.0 system folder onto my secondary HD, which shows to have the OS9 drivers installed. This was bad news trying to boot this way. A message said it could only boot from the original media (the CD, no?), and it got locked into a loop. Got out by booting with Option pressed, thanks to a tip read here
So, is there another way to check the firmware rev without obtaining 9.1? I visited a site recommended in here for system CDs and found a retail 9.1 offered, but for $160 (yikes!). I really have no need to use 9 in the future, having no software for it, I just need to boot it to check the firmware rev.
Suggestions? Thanks for your time!!!

Hi, rotordude -
There is a way to check the firmware version (Boot ROM version) without having to trust the accuracy of the software in OSX or OS 9.
Boot the machine into Open Firmware - restart; immediately press the Command-Option-O-F keys, keep that combo held down. The machine will quickly boot into Open Firmware, which is coded on the logic board, not on any disk.
You will be presented with a text-based screen. On the second line will be this string -
Apple PowerMac3,1 #.#.#f# Boot ROM
The "PowerMacc3,1" portion will identify it as being a G4 (AGP), aka "Sawtooth", model.
The "#.#.#f# Boot ROM" will have numbers replacing the "#" character - this shows the current firmware version.
For example, on that line in Open Firmware my G4 (AGP) displays
Apple PowerMac3,1 4.1.8f5 Boot ROM
indicating the firmware version is 4.1.8, which I know to be correct - I have applied the 4.1.8 firmaware update (now no longer available), but not yet the 4.2.8 firmware update (I do not have OSX 10.2 or later on this machine).
To get out of Open firmware, enter exit at the prompt and press Return; or enter boot at the prompt and press Return; or use the force restart button on the front of the Mac (the small raised-face button under the power button, the left-hand one of the two small buttons).
It has been reported by some users that once the firmware on their machine was updated, it would no longer boot to the original OS (non-OSX) version that shipped with the machine. Based upon comments, though, this does not appear to be a universal result of updating firmware.
Take a close look at the "PowerMac G4 Software Install SSW version 9.0" CD that you got with the machine. What is the part number shown in small print on the right-hand side of the label? The diskl that came with my G4 (AGP) shows this info at that location -
SSW version 9.0.4
691-2657-A
- and the CD is titled in large print "PowerMac G4" with a sub-titled "Software Install".

How do I install a foxit button on my tool bar? I recently upgraded to the latest version, but my tool bar does not contain a firefox button which is need for certain tasks, such as private browsing.

I had an existing laters 3 point whatever version of Firefox and recently upgraded to Firefox 10. This new version still has the old toolbar across the top, but there is no "Firefox button" which one has to use to activate certain action such as "private browsing." Is there anyway I can install the button on the toolbar, or is there a way to change to the new version 10 interface which includes the Firefox Button. I would prefer the former (the old configuration with the tool bar on top, but if that cannot be done, how to I migrate to the new configuration which apparently puts the tools on the side, if I'm not mistaken.
Thanks for any help you can provide. I have Windows XP.

If you have the old fashioned toolbar, you can still go into Private browsing by clicking Tools, then "Start Private Browsing". All the options that are in the Firefox button are in the old style toolbar, just maybe a little more hidden.
To enable te Firefox button, go into View, then Toolbars, then uncheck "Menu Bar". You should have the Firefox button.

How can I log in to my computer? I changed language on keyboard and I shut down my computer.Now keyboard has no numbers, which I need for my pc password

Yesterday I was working on my computer and I changed English to Lithuanian language on the keyboard. I shut down my computer. Now when I want open it, I can't type correct password to access my account . There is left Lithuanian language on keybord, with has no numbers. And I need numbers to use for my password.

loretarem wrote:
There is left Lithuanian language on keybord, with has no numbers.
It does have numbers of course, they are made by first hitting the ` key (top most left most on a US keyboard) and then the usual number key. Have you tried that? Such combos often don't work in password fields, but you never know.

Which EHP need for SAP ESS MSS

Hello,
I am web dynpro ABAP Consultant. We are going to implement SAP ESS MSS portal for an HR project. Project requires lot of adobe interactive forms and web dynpro ABAP stuff. Currently we have EHP.0 . I dont know whether EHP.0 is enough or i have to go for higher verisons like (EHP 3..4..5) Please let u know which EHP verison have to implement.
PLease help me ...
Thanks In Advance.
Sudhira

Hi Sudhira
You should install EHP5 which was released last Thursday as there have been major changes in ESS/MSS and it is delivered in WDA vs the earlier releases which was WDJ.
Good luck.
Jarret

Which Drivers Needed for SATA setup

I'm having a new Western Digital SE SATA 200GB HDD installed tomorrow(Tuesday).
So far I've located the Nvidia floppy for SATA RAID.
I've noticed that there is a downloadable file of 487KB that does the same thing.
What I need to know is....will the floppy start me off: ie can I use it to install after I hit the F6 button.
If not I can easilly download the file onto a floppy I have ready.
I appreciate that some of the moderators may be busy, or otherwise occupied but since it is 10.02pm here and almost near kip time , a reply before then would be worth its weight in gold
Thanks

He is right Charlie. This is some further info.
Here is how to install Windows on a SATA boot drive: (This procedure has been used by many including my self to solve the same problem.)
- Have only the SATA drive you want to be the boot drive in your system. Disconnect the power to all other HDD's if any.
- Have only one optical drive. Disconnect the power to the other optical if any.
- Plug SATA drive into SATA 1 (it may show us as an IDE drive somewhere down the list in BIOS. That's okl)
- Enable appropriate SATA options in BIOS. Set boot order to floppy, cd, SATA drive. Set boot priority to SATA drive.
- Partition and format using the utilites CD that came with the SATA drive. (copy any files you need from this drive to a back up drive)
- Run Windows setup. No need to do the F6 thing unless you are planning to do a RAID configuration.
- Windows should install just fine
- After you are up and running, plug power back into your other drives if any.
I hope this works for you.

Windows 7 - which version needed for Palm to work?

I think perhaps I understand the answers, but please tell me if I have this worked out correctly. I have a Palm M515, so no bluetooth or wifi.
1. I want a 32 bit system on one machine. I think I can simply install Windows 7 Home Premium, install Palm Desktop V4.1 and everything will work fine just as it does under Vista. I sync using USB or serial. Is that right?
2. I want a 64 bit system on another machine. I know Palm don't support 64 bit. However reading the Microsoft pages if I buy Windows 7 Pro it provides support for the Windows XP Virtual Machine. I assume the virtual machine can be 32 bit? So if I install that then I believe I can install the Palm software (I'm on V4.1) and also use USB to synchronise. Is that right? Has anyone tried it? Have Palm themselves tried it yet?
These seem to me crucial questions for many users as 64 bit system become common. Do Palm read these forums, I can find nothing about this on their website?
Post relates to: Palm m515
This question was solved.
View Solution.

I have a fix that works fine for me. I bought a cheap PC that came with 64 bit home premium, and I am considering rolling it to 32 bit pro but until then, I have installed Vmware Player - a free app that will run in 64 bit Win 7.
I migrated my old Windows XP system to this platform, and have been very pleasantly surprised by how well USB works on it (I have a lot of VMware experience from server 1.x, server 2.x, ESX 3 and 4 - this is a real leap ahead.) I am able to sync to the Palm desktop in the virtual XP very nicely, and Mobipocket works there as well. Since no one is suggesting that XP mode from Windows is worth a try, I have to assume that the Windows virtualization platform is not as complete. This does not surprise me.
Now that I know the palm desktop may install in Win 7, I have a migration path for the data, but to be honest, so much of my day-to-day work requires that I have access to a working 32 bit install that I use the VM OS a lot of the time.
By the way, it may be harder to 64 bit drivers for Windows than you think. The key app for me is a Cisco IPSEC vpn client. I have seen a purported beta of the application for 64 bit systems but don't trust it.
Given how much $$$ a Cisco house spends on hardware and licenses, and how huge Cisco is, if Cisco can't pull its head out and deal with this, I can hardly blame Palm.

310-055 which chapter need for study?

Similar Messages

Maybe you are looking for