3750: Cannot be managed, management IP reachable.

Hi team.
We have a switch in production that serves as a L2 ALS. I was about to test it's L3 capabilities and after I issued ip routing , the switch then cannot be managed (i.e., telnet/ssh attempts are failing). Though, its management IP is still reachable.
The switch is running the following code.
Cisco IOS Software, C3750 Software (C3750-IPBASE-M), Version 12.2(50)SE5, RELEASE SOFTWARE (fc1)
Has anyone encountered an issue like this? What could be the probable reason?
Should I reboot the switch already?
Thanks in advance.

My thought was the same as Peter that when ip routing is enabled then the default-gateway statement stops working. (it is not necessarily gone, but it no longer works) But I am puzzled at the statement in the original post where Carlos says that the management IP is still reachable. I think that we need more information about that. Is it reachable from remote subnets? Or is it reachable only from devices connected in the local subnet?
While I agree that console access could be very helpful I wonder if there are other alternatives that might allow Carlos to access the switch. In particular if the switch is reachable from devices in the local subnet I wonder if there is a router or another switch connected in the same subnet with this switch and whether Carlos might access that router or switch and from that device then access this switch using local telnet or SSH.
HTH
Rick

Similar Messages

I am trying to create a new profile, but I cannot open profile manager in Mac OS 10.5.8. I get the following error: "dyld: unknown required load command 0x80000022 Trace/BPT trap".

Hello,
I am trying to repair my Firefox profile, but I cannot open profile manager in Mac OS 10.5.8. When I follow the directions for opening profile manager in my Terminal utility, I get the following error: "dyld: unknown required load command 0x80000022 Trace/BPT trap".
At this point, Firefox (v 5.0 or previous versions), is not running.
Thanks.

[http://asqueella.blogspot.com/2010/12/dyld-unknown-required-load-command.html Here's an Explanation]. Basically you need to add "arch -i386 " at the beginning of the command because 10.5 is 32-bit only and more recent versions of Firefox default to 64-bit.

Cannot see the manage dimension option

Hi,
We have newly installed BPC for MS version in our place but we cannot see the manage dimension option in the BPC admin as shown in this screen shot http://wikisend.com/download/618558/BPC admin page.JPG
May i know why?

Hi,
This is normal... that mean your task profile for "BPCUser" doesn't offer the possibility to perform Administration tasks.
You should take a look to the Security Guide, in order to see if Primary Administrator or Secondary Administrator could be assigned to your users.
You can find all the guides under this link:
http://help.sap.com/content/bobj/sbu/docu_sbs_bpc_design.htm
But in any case, the problem only comes from a task profile that doesn't allow Admin tasks.
Hope it will help.
Kind Regards,
Patrick

Cannot acquire a managed connection

Dear All,
I am very new to the SSIS package development so please point out my stupidity If I have done any. I am trying to ETL data from excel spreadsheet to SQL server using Excel data connections and OLE DB and ADO.Net data connection. I am using CDC task to monitor
any changes done in the source excel file. I am doing it in a way same package extract information from the spreadsheet and import in to Server 1 (CDC enabled) and compared it to the same table hosted on another server 2 which is a production server.
When I run this package on DTS it runs fine and I am able to generate Deployment Manifest file. When I try to run the same Manifest file I am getting below error
Error: Failed to Decrypt an encrypt XML node because the password was not specified or not correct. Package load will attempt to continue without the encrypted information.
Error: Cannot acquire a managed Connection from the run-time connection Manager
I have change the package encryption level from "EncryptSensitivewithUserkey" to "EncryptsensitivewithPassword" and have added password to the PackagePassword it the package property and saved this project.
when i add this package to the SQL agent job I am still getting below error message
Message
Executed as user: administrator. Microsoft (R) SQL Server Execute Package Utility Version 11.0.2100.60 for 32-bit Copyright (C) Microsoft Corporation. All rights reserved. Started: 11:44:49 Error: 2014-12-04 11:44:52.10
Code: 0xC020801F Source: CDC Control Task CDC Control Task Description: Cannot acquire a managed connection from the run-time connection manager. End Error Error: 2014-12-04 11:44:52.10 Code:
0xC0024107 Source: CDC Control Task Description: There were errors during task validation. End Error DTExec: The package execution returned DTSER_FAILURE (1). Started: 11:44:49 Finished: 11:44:52
Elapsed: 2.215 seconds. The package execution failed. The step failed.
Please help I am stuck on this issue from last 2 days now. If you need more info please let me know.
regards
JK

Looks like you run the package in thee Agent for this purpose you should use the 'Rely on server storage for encryption' (ServerStorage) protection
In the "EncryptsensitivewithPassword" scenario you need to provide the actual password by editing the command line in there:
with adding switch /De <password> to it
Arthur
MyBlog
Twitter

Cannot create connection manager factory:

I'm using Oracle XDK Java 9.2.0.3.0 Production
I try to bring up the xsqlservlet through the demo
and get this error :
XSQL-017: Unexpected Error Occurred
java.lang.RuntimeException: java.lang.RuntimeException: Fatal error. Cannot create connection manager factory: oracle.xml.xsql.XSQLConnectionManagerFactoryImpl
at oracle.xml.xsql.XSQLPageManager.getPage(XSQLPageManager.java:135)
at oracle.xml.xsql.XSQLPageRequestImpl.getXSQLPage(XSQLPageRequestImpl.java:454)
at oracle.xml.xsql.XSQLPageProcessor.process(XSQLPageProcessor.java:80)
at oracle.xml.xsql.XSQLServlet.doGet(XSQLServlet.java:60)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
Any idea what I'm missing?

I have fixed the problem.

Cannot connect Service Manager with Orchestrator Web Service URL

Dear TechNet User,
i cannot connect my service manager console with my Orchestrator Webservice. i try to connect to "http://AMSCO01:81/Orchestrator.svc" ... the user i´ve choose is local admin on the orchestrator Machine.
Thats the Logfile:
Date: 07.10.2013 15:23:16
Application: System Center Service Manager
Application Version: 7.5.2905.0
Severity: Error
Message: Could not connect to the Orchestrator web service.
System.Data.Services.Client.DataServiceQueryException: An error occurred while processing this request. ---> System.Data.Services.Client.DataServiceClientException: <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1"/>
<title>404 - File or directory not found.</title>
<style type="text/css">

</style>
</head>
<body>
<div id="header"><h1>Server Error</h1></div>
<div id="content">
<div class="content-container"><fieldset>
<h2>404 - File or directory not found.</h2>
<h3>The resource you are looking for might have been removed, had its name changed, or is temporarily unavailable.</h3>
</fieldset></div>
</div>
</body>
</html>
   at System.Data.Services.Client.QueryResult.Execute()
   at System.Data.Services.Client.DataServiceRequest.Execute[TElement](DataServiceContext context, QueryComponents queryComponents)
   --- End of inner exception stack trace ---
   at System.Data.Services.Client.DataServiceRequest.Execute[TElement](DataServiceContext context, QueryComponents queryComponents)
   at System.Data.Services.Client.DataServiceQuery`1.Execute()
   at System.Data.Services.Client.DataServiceQuery`1.GetEnumerator()
   at Microsoft.EnterpriseManagement.ServiceManager.Sdk.Connectors.OrchestratorRunbookConnector.GetRunbookFolders(OrchestratorContext scoContext, Folder parentFolder)
   at Microsoft.EnterpriseManagement.ServiceManager.UI.Administration.Connectors.Orchestrator.OrchestratorConnectorHelper.ValidateServerConnection(Boolean found)
System.Data.Services.Client.DataServiceClientException: <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1"/>
<title>404 - File or directory not found.</title>
<style type="text/css">

</style>
</head>
<body>
<div id="header"><h1>Server Error</h1></div>
<div id="content">
<div class="content-container"><fieldset>
<h2>404 - File or directory not found.</h2>
<h3>The resource you are looking for might have been removed, had its name changed, or is temporarily unavailable.</h3>
</fieldset></div>
</div>
</body>
</html>
   at System.Data.Services.Client.QueryResult.Execute()
   at System.Data.Services.Client.DataServiceRequest.Execute[TElement](DataServiceContext context, QueryComponents queryComponents)
any ideas? Thank you very much!

Hi,
I am unable to connect to
http://hostname:81/Orchestrator2012/Orchestrator.svc/ in IE and am getting the same error while creating the connector.
I can connect to orchestrator via http://hostname:81/ but it still gives me the same error when I create the connector (Cannot connect Service Manager with Orchestrator Web Service).
anyone seen it before?

SSIS 2012 OData - Cannot acquire a managed connection

I have an SSIS project in SQL Server 2012 deployed via VS 2012 SSDT-BI.
If I run this from my local SQL Server it works correctly, however if I push it to another server and run it I always get a
Cannot acquire a managed connection from the run-time connection manager.
The connection looks like this..
Document Url=http://myodata;Include Atom Elements=Auto;Include Expanded Entities=False;Integrated Security=SSPI;Persist Security Info=False;Time Out=600;Schema Sample Size=25;Retry Count=5;Retry Sleep=100;Keep Alive=True;Max Received Message Size=4398046511104
Any ideas?
Paul

Can you try passing "User ID" and "Password" instead of "Integrated Security=SSPI"?
Example,
Base Url=http://dynamicsnav:7048/dynamicsnav70/OData/;Include Atom Elements=Auto;Include Data Services Content=True;Include Expanded Entities=False;Namespaces to Include=*;Integrated Security=Basic;User ID=navadmin;Password=**********;Time
Out=600;Persist Security Info=False;Schema Sample Size=25;Retry Count=5;Retry Sleep=100
Regards, RSingh

Windows AD user cannot use Promotion management, Why?

A Procedure is distributed by SAP how to Use ”Promotion Management” in a OTAP/ DTAP street.
See Chapter/Secton 05 of this document: https://archivesaptechedhandson.hana.ondemand.com/contentArchive/AP263_Exercises_VHO_FINAL.pdf
This is a very good/useful procedure. This procedure works with an “Enterprise” Account.
In our environment we ONLY work with “Windows AD” accounts. (to keep users management very straight forward.)
We do not get the procedure working with “Windows AD” account.
Our procedures stops at Section: “07.3 Add to VM”:
The selected webi document, within the promotion Job, is not getting "checked in" in Version Management.
After that all other steps are useless.
Windows AD user cannot use Promotion management, but Why?
(If we use version managment on the individual webi report, with a windows AD user everyting works fine)

Sebastian,
you showed us the right direction.
We run SAP BusinessObjects BI Platform 4.1 Support Pack 2 Patch 3.
In SAPBO4.1 we had to extend the properties of 2 services:
AdaptiveJobServer and the AdaptiveProcessingServer.
Now we can use windows active directory for promotion management,
thanx.

HT204266 App store icon dissappeared from screen on ipad2, also cannot download or manage my apps in itunes when connected to my desktop

App store icon dissappeared from screen on ipad2, also cannot download or manage my apps in itunes when connected to my desktop. Need help!!

For the App Store icon check Settings>General>Restrictions. You may have restricted the installing of apps and the icon will disappear.
If that's not it, swipe from screen to screen as you may have moved the icon.
You can also reset the home screen layout and the icon will reappear - but the home screen will return to the way that it looked when you first activated your iPad.
Settings>General>Reset>Reset Home Screen Layout.
More information is needed about the apps not syncing or downloading. Are you signed into the same ID on the iPad as your are using in iTunes on your computer and are you talking about iTunes on the computer being the problem?

Cannot install Application Manager: "Installer failed to initialize"

Hello,
Cannot install Application Manager. I get this error message: "Installer failed to initialize".
Please help,
g2598m

A chat session where an agent may remotely look inside your computer may help
Creative Cloud chat support (all Creative Cloud customer service issues)
http://helpx.adobe.com/x-productkb/global/service-ccm.html

Error for Sapgui 7.10: 'Cannot initialize context management library'.

Hi Xperts,
While accessing system from logon pad I am getting an error "cannot initialize context management library".
Can anybody help out for this.
Thanks in advance,
Chetan

Hi Everybody,
First of all remember that the 710 GUI is out of support.
Refer SAP note 1322923   Maintenance strategy / deadlines BW Business
For your problem please try the following:
- deinstall the sapgui with following command line in START -> RUN
    nwsapsetup /uninstall /all /nodlg
( on the affected workstation )
- uninstall the VCREDIST installation in the CONTROL PANEL ->
ADD / REMOVE Software -> deinstall the
+ Microsoft redistributable runtime DLLs VS2005 SP1(x86)
+ Microsoft redistributable runtime DLLs VS2008 SP1(x86)
+ MSXML 4.0
- if exists, delete the folder
   C:\Program Files\Common Files\Sap Shared
- delete all other folders where the sapgui was installed
   c:\%program files%\sap\sapsetup
   C:\%program files%\sap\Frontend
   C:\%program files%\SAP\Business Explorer
   C:\Documents and Settings\All Users\Start Menu\Programs\SAP Front En
   C:\Documents and Settings\All Users\Start Menu\Programs\Business
- delete then all SAP entries in the Registry in
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\SharedDLL
( !!!!     ONLY the   SAP* entries !!!! )
After that reinstall the latest patches which should solve the issue.
Regards,
Naveen.

Cannot Modify Identity Management Realm : [LDAP: error code 20 - Attribute

Hi ,
I am new to the OID and now i am trying to Creating a New Identity Management Realm, i followed the steps of these followed URL
http://www.oracle.com/technology/obe/obe_as_10g/im/realm_mng/realm.htm
in step 12 it showing the following error
Cannot Modify Identity Management Realm : [LDAP: error code 20 - Attribute
Anyone please help me
Thanks & Regards,
Manoj

I was doing a terrible mistake.. Instead of using createSubcontext, i was using modifyAttributes to create an user. The Problem is resolved now. Here is the latest code
try {
               Hashtable env = new Hashtable();
               env.put(Context.INITIAL_CONTEXT_FACTORY, "com.sun.jndi.ldap.LdapCtxFactory");
               env.put(Context.SECURITY_AUTHENTICATION, "simple");
               env.put(Context.SECURITY_PRINCIPAL, "cn=" + "Directory Manager");
               env.put(Context.SECURITY_CREDENTIALS, "password");
               env.put(Context.PROVIDER_URL, "ldap://localhost:389/dc=mytest,dc=com");
               DirContext ctx = new InitialDirContext(env);
               // Create attributes to be associated with the new context
               Attributes attrs = new BasicAttributes(true); // case-ignore
               Attribute sn = new BasicAttribute("sn");
               sn.add("NewUser");
               Attribute cn = new BasicAttribute("cn");
               cn.add("NewUser");
               Attribute objclass = new BasicAttribute("objectclass");
               objclass.add("top");
               objclass.add("inetOrgPerson");
               attrs.put(objclass);
               attrs.put(sn);
               attrs.put(cn);
               // Create the context
               Context result = ctx.createSubcontext("cn=NewUser", attrs);
          } catch (Exception e) {
               System.out.println("e is " + e);
          }

ORA-12913: Cannot create dictionary managed tablespace

I am using the following statement:
CREATE TABLESPACE data01
DATAFILE 'D:\ORACLE\ORADATA\SSR\data01.dbf' SIZE 2M
EXTENT MANAGEMENT DICTIONARY;
and I get the following error message:
ORA-12913: Cannot create dictionary managed tablespace
If I take off EXTENT MANAGEMENT DICTIONARY, the statement executes. What am I doing wrong?

Details about create a tablespace:
CREATE TABLESPACE
Purpose
Use the CREATE TABLESPACE statement to create a tablespace, which is an allocation of space in the database that can contain persistent schema objects.
When you create a tablespace, it is initially a read/write tablespace. You can subsequently use the ALTER TABLESPACE statement to take the tablespace offline or online, add datafiles to it, or make it a read-only tablespace.
You can also drop a tablespace from the database with the DROP TABLESPACE statement.
You can use the CREATE TEMPORARY TABLESPACE statement to create tablespaces that contain schema objects only for the duration of a session.
See Also:
Oracle9i Database Concepts for information on tablespaces
ALTER TABLESPACE for information on modifying tablespaces
DROP TABLESPACE for information on dropping tablespaces
CREATE TEMPORARY TABLESPACE
http://download-west.oracle.com/docs/cd/B10501_01/server.920/a96540/statements_74a.htm#SQLRF01403
Joel P�rez

Cannot locate policy manager query/update service

Hi,
I installed soa_server 11.1.1.4.0 on windows server 2003 machine, I got a weird issue while accessing the weblogic policy manager through em. I logged into em console, weblogic domain, domain, webservvice, policy throw this erro below
"*Cannot locate policy manager query/update service. Policy manager service look up did not find a valid service, due to: Unable to connect to WS Policy Manager. <- oracle.wsm.policymanager.PolicyManagerException: WSM-02118 : The query service cannot be created. <- javax.naming.NameNotFoundException: While trying to lookup 'QueryService#oracle.wsm.policymanager.ejb.IStringQueryServiceRemote' didn't find subcontext 'QueryService#oracle'. Resolved ''; remaining name 'QueryService#oracle/wsm/policymanager/ejb/IStringQueryServiceRemote'*"
even my wls-m is running , I can access the http://host/wls-pm.
Last three days I have spend for this issue but no clue.I disabled SSL, enable with SSL host validation false but also get this error.Please sort out this issue.
Thanks
Govindan

Problem solved.
Soln:
Given ip address in the Listen Address field of weblogic Admin and SOA server. :)
Thanks
Govindan P

I cannot update Applications manager because ConnAPI.DLL cannot be found

I cannot update Applications manager because ConnAPI.DLL cannot be found

This particular forum (sharing and storage) was created to help those transitioning from Photoshop.com to Adobe Revel. I am moving your post to the correct forum so that it can get proper attention.
We also have many other forums relating to other Adobe products at: http://forums.adobe.com.
Out of curiosity, can you tell me how you found our forum page?

Applications are updating but cannot install Application Manager?

Applications are updating but cannot install Application Manager? Each time I try to open Application manager it tries to install every time.After installing several times I was able to finally see the problem. It says it cannont install because some Adobe program is running. I donot see anything Adobe running except for Application Manager in TaskManager.

Ok, here is what the box that comes up says:
We've encountered the following issues:
Other instances of Adobe Application Manager are currently running which must be closed before installing this product. Please close or wait for them to complete.
I checked control panel and only see the CS6 Master suite and Adobe Help Manager listed, not the Application Manager. Before I reinstalled I used The Adobe Clean tool to remove all programs and all but this one installed fine.

3750: Cannot be managed, management IP reachable.

Similar Messages

Maybe you are looking for