Windows AD user cannot use Promotion management, Why?

A Procedure is distributed by SAP how to Use ”Promotion Management” in a OTAP/ DTAP street.
See Chapter/Secton 05 of this document: https://archivesaptechedhandson.hana.ondemand.com/contentArchive/AP263_Exercises_VHO_FINAL.pdf
This is a very good/useful procedure. This procedure works with an “Enterprise” Account.
In our environment we ONLY work with “Windows AD” accounts. (to keep users management very straight forward.)
We do not get the procedure working with “Windows AD” account.
Our procedures stops at Section: “07.3 Add to VM”:
The selected webi document, within the promotion Job, is not getting "checked in" in Version Management.
After that all other steps are useless.
Windows AD user cannot use Promotion management, but Why?
(If we use version managment on the individual webi report, with a windows AD user everyting works fine)

Sebastian,
you showed us the right direction.
We run SAP BusinessObjects BI Platform 4.1 Support Pack 2 Patch 3.
In SAPBO4.1 we had to extend the properties of 2 services:
AdaptiveJobServer and the AdaptiveProcessingServer.
Now we can use windows active directory for promotion management,
thanx.

Similar Messages

Using Application Manager, why can't I see my CS5.5 applications, just CS6 lists to buy?

I am migrating my CS5.5 apps from an old XP laptop to a new Win8. Also Acrobat Pro, so I am using Application Manager to make sure I am not offending version copy allowances, but Application Manager is not showing any of the apps on my system, jut CS6 to buy and a couple trials. Where are my current Adobe applications?
Using Application Manager, why can't I see my CS5.5 applications, just CS6 lists to buy?
GMM

Once you save that to a location on your system.
Make sure Acrobat is Quit and then do this:
1. In the Finder go to the "Go" menu.
2. Select Go to Folder
3. Paste this path into the "Go to the Folder:" field
/Applications/Adobe Acrobat XI Pro/Adobe Acrobat Pro/Contents/Resources/JavaScripts/
4. Copy the file into the JavaScripts folder.
5. Launch Acrobat
Now you should see the menu spoken of in the blog and web page.

Lock the plant so that other user cannot use the same plant.

Hi Gurus!
I ahve this small report which shows the pro-rate factor . In this report I need to block the plant or lock it(a soft) lock witha message that some other user is using the plant so that other cannot use the same plant to post.Following is the report and if soemone can help me out would be very kind enough.I ahve added teh code where validation of plant is doen , so it must be somewhere here the locking should be done as per my thinking . Kindly suggest please.
*&      Form get_pro_factor
*       get pro rate factor from the given
*       combination of plant/sloc/mat#/period
form get_pro_factor .
select single zpr_factor zpr_disp_factor zpr_pipe_net zpr_pipe_gross
from zprfactor
into (zprfactor-zpr_factor, zprfactor-zpr_disp_factor,
        zprfactor-zpr_pipe_net, zprfactor-zpr_pipe_gross)
where zpr_werks = p_werks    and
        zpr_lgort = p_lgort    and
        zpr_matnr = p_matnr    and
        zpr_mjahr = p_mjahr    and
        zpr_monat = p_monat.
v_subrc = sy-subrc.
if zprfactor-zpr_factor = 0.
    if c_wp = p_lgort+0(2).
      zprfactor-zpr_factor = 1. " Don C added this routine
    endif.
endif.
if zprfactor-zpr_disp_factor is initial.
    if not zprfactor-zpr_pipe_gross is initial.
      zprfactor-zpr_disp_factor = zprfactor-zpr_pipe_net / zprfactor-zpr_pipe_gross.
    endif.
    if zprfactor-zpr_disp_factor is initial.
      zprfactor-zpr_disp_factor = 1.
    endif.
endif.
endform.                    " get_pro_factor
*&      Form valid_plant
*       validate whether plant entered in selection screen
*       exists in database or not
form valid_plant .
if not ( p_werks is initial and
             p_lgort is initial and
             p_matnr is initial and
             p_mjahr is initial and
             p_monat is initial ).
    select single werks from t001w into t001w-werks
           where werks = p_werks.
    if sy-subrc ne 0.
      message e048(zmm) with p_werks.
    endif.
endif.
endform.                    " valid_plant
*&      Form FIND_MATKL
form find_matkl .
select single matkl into v_matkl from mara where matnr = p_matnr.
endform.                    " FIND_MATKL
*&      Form UPDATE_ZPRFACTOR
form update_zprfactor using p_flag.                         "DEVK903224
call function 'ENQUEUE_E_TABLEE'
    exporting
      mode_rstable   = c_e
      tabname        = 'ZPRFACTOR'
    exceptions
      foreign_lock   = 1
      system_failure = 2
      others         = 3.
if sy-subrc <> 0.
    message id sy-msgid type sy-msgty number sy-msgno
            with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
else.
    select single * from zprfactor where zpr_werks = p_werks
                                   and   zpr_lgort = p_lgort
                                   and   zpr_matnr = p_matnr
                                   and   zpr_monat = p_monat
                                   and   zpr_mjahr = p_mjahr.
    if sy-subrc = 0.
      zprfactor-zpr_rate_flag = p_flag.                     "DEVK903224
      update zprfactor.
    endif.
endif.
call function 'DEQUEUE_E_TABLEE'
    exporting
      mode_rstable = c_e
      tabname      = 'ZPRFACTOR'.
Thanks
Aarav

call function 'ENQUEUE_E_TABLEE'
    exporting
      mode_rstable   = c_e
      tabname        = 'ZPRFACTOR'
    exceptions
      foreign_lock   = 1
      system_failure = 2
      others         = 3.
ENQUEUE_E_TABLEE   } E_TABLEE is the name of the lock object, it starts with character "E".

I cannot use the managed driver beta on Mono

Managed driver beta has been released. However, I cannot use it on Mono, which is a Dot Net Environment on Linux.
The fata exception is type load fail...
So I want to know what else dll the managed driver depends.
Look forward for your reply.
Mikes

Mono isn't supported by the beta nor will it be supported in the first production release. Oracle will consider supporting Mono in a release after the first production release.

Windows Feedback app cannot use

When I open the app, it says me did not register with the Windows Insider Preview Program,but I have already registered.How can I do to use the app?The Get Started and Insider Hub also cannot use.

did you register here https://insider.windows.com/, also try signing in on the site.

Force Quit window 'blank' and cannot use shutdown/restart in menu

I have a Dual G5 running 10.5.8.
Over the past 2 months I will have a situation where my computer will still work in individual applications, but
1. I cannot use apple-tab to change applications
2. I cannot select the restart/shutdown menu
3. option-apple-esc brings up the Force Quit menu, but its blank
I end up having to hard-restart the machine using the button on the front.
Anyone have ideas on what may be at the root of this?
I have created another user account but still get the error.
I have a new hard drive installed.
I have run /sbin/fsck/ -fy all is clean
I have run repair permissions
What next?

Hi
I have seen damaged/corrupted fonts cause similar issues. If you've introduced/downloaded new fonts in the last two months perhaps it's these that's causing the problems?
Have you tried booting from the installer disk and trying for an Archive & Install and selecting the Preserve Network users and Settings option? You could try using something more industrial like DiskWarrior first?
Whilst you have the chance make sure you have any relevant backups made and handy. Yes I know it's a brand new drive etc but you never know?
Tony

Mac User Cannot Use Form Created in Windows Acrobat 9.0 Pro

I have created a form and emailed it to a Mac user. He does not know what version of Acrobat he has or even if he is using a full version of Acrobat or Acrobat Reader (I tried to walk him through to check his version, but he could not find it).
He is using a laptop that is about 5 years old.
Anyway....I created this form in Acrobat 9.0 Pro. It works great for me...when I type in the fields, the text falls perfectly on the lines; the autocalculate works perfectly, and the RESET button works perfectly. When he opens the file, the text shows all below the lines, the autocalculate does not work at all, and neither does the RESET button. He sent it to another person, and they too could not use the form.
I have enabled the PDF so it can be filled out by Reader users and it is not in PDF/A mode, but it still is not working for him. I went to the library where they have a Mac and I was able to open it through Acrobat Reader 9 and again, I was able to fill the form out and it worked perfectly for me.
Would anyone be available (with a Mac) through email so I could send you the file to see if any Acrobat pros might be able to tell me what is wrong with it? I am absolutely frustrated to the points of tears over this. If you do not want to place your email here, I will give you mine so you can email me first ([email protected]); just let me know here that you are emailing me so I know to check email rather than check here.
Thank you!
Laura

He's probably not using either Acrobat or Reader. The Mac comes with a built-in PDF viewer named Preview and it has limited support for PDF forms. It even corrupts them when it saves. It should definitely be avoided. Fortunately Reader is freely available, you just have to get him to install it.

Windows SMB users cannot connect to 10.5.4 server

Hi all,
Have a server running 10.5.4 bound to AD and running an OD to provide management of the Macs. Pretty standard setup and haven't had any problems elsewhere with the same deployment. However we're having a problem with XP users connecting to SMB shares. Mac users can connect over AFP or SMB fine, XP users are getting a "Network path could not be found" error. What's more the errors in the SMB log on the server aren't too descriptive. We're getting a few broken pipe errors, but no indication of what's causing that. XP machines don't appear to be getting to the authentication stage.
Server is an Xserve with a Promise RAID, shares are on a 4TB partition, bound to AD (OD not running Kerberos). SMB setup seems to be correctly aware of the AD.
Anyone any ideas?
Thanks

Is your SMB a Standalone or Domain Member?
I have a similar problem and noticed that if I change SMB from "Domain Member" to Standalone Windows users can connect. Now every so often Leopard Server will change SMB back to a Domain Member (automatically).
I have the Server bound to AD. AFP works for the Macs no matter what. Mac Users authenticate to AD and mount the share. However if they try to use SMB, it fails for the Macs as well if SMB is a Domain Member.
I would like to stop Leopard from not reverting back or fix the "domain member" problem.
The fact that I can connect while it's a Standalone suggests, to me, that it's not a permissions problem. As well the failure carries to the Mac side means it's not a Windows issue.

External email users cannot use IMAPS/SMTPS

We have an email server running but since Mountain Lion (ML) server we do not have the webmail for external users and they are now forced to use email clients on PCs etc., which would be acceptable, if it worked.
This has created a weird problem... they cannot read and send email anymore.
Our server is using SSL and our preferred settings are:
IMAP
Port 993
Authentication: CRAM-MD5
SMTP
Port 587
Authentication: CRAM-MD5
The mail server is set to use automatic authentification (which I do not like because of the clear text option)
All this worked honkey-dorey before on Lion Server, but not now on a fresh installation of OS X ML Server. Only when using an iPhone or and iPad (3G mobile/cell connections) or being on our LAN can people read and send mail. We have users externally in Belgium, Denmark, Serbia, Turkey and Spain, and none of these users can now access their email. All the external users no matter if they use MAC/WINDOWS/LINUX clients have the same problems.
Looking the log at the same time when the users attempt to log in to check email just verify that the server is rejecting their connection in spite of them using correct credentials. The users get messages ranging from incorrect username or password to incorrect password but I can login into their accounts locally or from the LAN.
Could this problem be related to the usertype Local or Local Network User?
Any ideas or help is greately appreciated?
Peter
(Now, if anyone from Apple should happen to read this then note that it would be greatly appreciated if Apple could mature and stabilize so these severe changes to vital services could be avoided. If you support webmail (good or bad) in one release then continue to do so and if you have an advanced interface to the server functionallity like in Snow Leopard, please let us, the users, be able to keep using those tools rather than using the current 'Nintendo' interface.)

Hi Peter
Because this is working internally, it should be easy enough to solve.
First thing, most likely obvious, you do have port 993 open to your server?
Second, please post logs. Since we are dealing only with imap, just the imap (mailaccess) log will do.
Third, webmail functionality can be restored. Roundcube or Squirrelmail can be installed on your ML server. Roundcube takes a number of steps, but has a great/fast interface, its waht 10.7 used. Earlier versions of server used SQuirrelmail.
If you are under heavy pressure to get this up now and don't want to wait for forum responses, you can find contact info in my profile.
Jeff

Windows XP User cannot connect to OS X Server... Keeps asking for password.

I have made my iMac G5 into a server. It is running OS X Server 10.5.7 with all updates. Only use it for file sharing. Have it setup as a standard server. Only have two users and can verify that SMB is running through the Server Admin application.
I use XP Pro with SP3 on my MacBook Pro. Both machines have relativley fresh installs that are unaltered. Both the windows side of my laptop as well as the SMB are set to the same workgroup.
When I am in XP I do the following:
1. Double click on My Network Places
2. In the My Network Places Window I click on the left hand column: View Workgroup Computers
3. I see my server: iMac Server (Imacserver)
4. Double click that icon... get a user login window with the title: Connect to imacserver.private
5. Input my user name and password (the same that I would use while in Leopard... which works fine) - Click OK.
Here is what I don't understand.
6. The login window comes back after about 10-15 seconds. As if the login was incorrect to try again.
7. The user name field now has in front of my name the name of the 'PC' forward slash my user name?? For example: MACPC24335\username
Why can I not connect to my server... in leopard it is very seemless and works fine... I feel that I am over looking something. Any thoughts or ideas as to why this is not working?
Thank you for your time.

Try this on your PC:
Start->Run...->Open:\\<ipadressofyourmac>\<sharename>
You will be prompted for your username and password.
Or
'My Computer'->'Tools'->'Map network drive...'
enter:
\\<ipadressofyourmac>\<sharename>
in the 'Folder' field.
Click 'Connect using a _different user name_.'.
Enter your server username and password.
Click 'OK'.
Click 'Finish'.

Standard user cannot use creative cloud

The most recent creativecloud update made it so that my users can not use CC. Adding them to local administrator group fixes this.
I only have 8 workstations to worry about so I never bothered with the packager and deployment tools. I thought maybe that would fix the issue by installing the applications through a package, however when I try to install a package I create the installer gets hung up.
Will installing the CC applications work with this method and standard users? If so how do I get these packages to install? I created them with the creative cloud packager, did the exception deployment first (Acrobat Pro) and then ran the setup found in the build folder and it gets hung up at the above screenshot. I left it for over an hour like this on a high end machine running a SSD.

Adobe emloyees can see the email address you are using to post with here, so no need to make it post it here. This is a public forum and we do not want you to recieve spam email.
Here is the help article for when you are mistakenly prompted for a serial number: http://helpx.adobe.com/creative-cloud/kb/ccm-prompt-serial-number.html. Did you purchase an English-only subscription by chance? If so switch the language to International English.
If your subscription is not English-only then you can close the Creative Cloud app, remove the file the OPM.db file and launch then try to sign in. Here is where the file is on your system:
Mac OS: You can locate the OPM.db file in the \User\<user name>\Library\Application Support\Adobe\OOBE folder. To access the hidden user Library folder, see Access hidden user library files | Mac OS 10.7 Lion.
Windows: You can locate the OPM.db file in the \Users\<user name>\AppData\Local\Adobe\OOBE folder. To view the hidden AppData folder, see Show hidden files, folders, filename extensions | Windows XP, Vista, Windows 7.

Windows 8 user cannot connect to public OS X Lion share as Guest, keeps asking for a password even though the folder is public?

As title suggests...
OS X Mountain Lion public share works fine for Mac's but as a guest from Windows its adamant it wants a password. If I use proper credentials it will allow me in the public share from the windows PC but I dont want to add creditinatials it should be an open folder to Network (LAN) WORKGROUP users.
OS X Guest account is set to "allow guests to connect to shared folders"
The Public folder is set in "Sharing" as READ ONLY everyone.
Mac's can access the share without needing credentials.
Windows PC asks for Username and Pass (have tried Guest (no password) or just pressing enter (no details)
Searched these forums see a few other people with similar problems yet no Answers
Help please!!

Try this on your PC:
Start->Run...->Open:\\<ipadressofyourmac>\<sharename>
You will be prompted for your username and password.
Or
'My Computer'->'Tools'->'Map network drive...'
enter:
\\<ipadressofyourmac>\<sharename>
in the 'Folder' field.
Click 'Connect using a _different user name_.'.
Enter your server username and password.
Click 'OK'.
Click 'Finish'.

Some Windows 8 users cannot connect to 1142N Autonomous

Hi folks,
I have got an issue with some Window 8 devices here. I am not sure if this is a misconfiguration or firmware issue.
Please have a look my config. Any help will be highly appreciated.
Thanks.
hostname QXAP2
logging rate-limit console 9
enable secret 5 $1$aQGz$y42twDoPdQJgJasegu0oj.
no aaa new-model
no ip routing
no ip cef
ip dhcp-server 192.168.0.50
dot11 syslog
dot11 ssid QXAP2
vlan 1
authentication open
authentication key-management wpa version 2
guest-mode
wpa-psk ascii 7 09415718015445414F
dot11 network-map
dot11 guest
crypto pki trustpoint TP-self-signed-1329179707
enrollment selfsigned
subject-name cn=IOS-Self-Signed-Certificate-1329179707
revocation-check none
rsakeypair TP-self-signed-1329179707
crypto pki certificate chain TP-self-signed-1329179707
certificate self-signed 01
quit
ip ssh version 2
bridge irb
interface Dot11Radio0
no ip address
no ip route-cache
encryption vlan 1 mode ciphers aes-ccm tkip
ssid QXAP2
antenna gain 128
station-role root
interface Dot11Radio0.1
encapsulation dot1Q 1 native
no ip route-cache
bridge-group 1
bridge-group 1 subscriber-loop-control
bridge-group 1 spanning-disabled
bridge-group 1 port-protected
bridge-group 1 block-unknown-source
no bridge-group 1 source-learning
no bridge-group 1 unicast-flooding
interface Dot11Radio1
no ip address
no ip route-cache
shutdown
antenna gain 0
peakdetect
no dfs band block
channel dfs
station-role root
interface Dot11Radio1.1
encapsulation dot1Q 1 native
no ip route-cache
bridge-group 1
bridge-group 1 subscriber-loop-control
bridge-group 1 spanning-disabled
bridge-group 1 port-protected
bridge-group 1 block-unknown-source
no bridge-group 1 source-learning
no bridge-group 1 unicast-flooding
interface GigabitEthernet0
no ip address
no ip route-cache
duplex auto
speed auto
interface GigabitEthernet0.1
encapsulation dot1Q 1 native
no ip route-cache
bridge-group 1
bridge-group 1 spanning-disabled
no bridge-group 1 source-learning
interface BVI1
ip address 192.168.0.254 255.255.255.0
ip helper-address 192.168.0.50
no ip route-cache
ipv6 address dhcp
ipv6 address autoconfig
ipv6 enable
ip default-gateway 192.168.0.1
ip forward-protocol nd
ip http server
ip http secure-server
ip http help-path http://www.cisco.com/warp/public/779/smbiz/prodconfig/help/eag
ip route 0.0.0.0 0.0.0.0 192.168.0.1
bridge 1 route ip

Your using WPA2, so you should just use aes:
encryption vlan 1 mode ciphers aes-ccm

Safari with Windows Media Player cannot use PHP as filename/src/url

I'm running Windows XP Pro SP2 with Windows Media Player 11
and Safari 3 public beta. In addition to being the absolute
slowest browser among MSIE, Firefox, Netscape, and Opera, the
Safari browser has two annoying WMP defects.
1) Even with WMP 11 installed, the code below for embedding
can use either the classid for WMP v6.4 or v7+ but Safari
(or rather it's plugin) always displays a v6.4 looking UI.
All other browsers display the media player using the v11 UI
2) Safari will not download the movie if the "filename" param
is a web url (e.g. getmovie.php?select=1234 ) rather than the
precise name of the movie file itself (e.g. "movie.wmv"). The
other browsers may differ in use of the param name="xxxx", where
xxxx is "filename" or "src" or "url" or "data" ... but Safari
will not work using any of these.
Has anyone successfully embedded a WMP object that uses the
URL as a PHP page (or other server-side script) ? I have already
my server-side PHP code that works perfectly for MSIE, Firefox,
Netscape, and opera. Safari is the only problem browser.
------------------------CODE------------
//Media Player v6.4
// CLSID:22D6F312-B0F6-11D0-94AB-0080C74C7E95
//Media Player v7,9,10,11
// CLSID:6BF52A52-394A-11d3-B153-00C04F79FAA6
<object id="MediaPlayer"
classid="CLSID:22D6F312-B0F6-11D0-94AB-0080C74C7E95"
type="application/x-oleobject"
height="300" width="300"
codebase="http://activex.microsoft.com/activex/controls/mplayer/en/nsmp2inf.cab #Version=6,4,5,715"
standby="Loading Microsoft Windows Media Player components...">
<param name="url" value="http://www.yourdomain.com/movie.wmv">


<object type="application/x-mplayer2" height="300" width="300">
<param name="filename" value="http://www.yourdomain.com/movie.wmv">
</object>

</object>

I have run into several issues pointing to what you are describing...
I fixed my Safari by installing the WMP plugin. I am able to view visualizations embedded into a webpage, one of which I created...I am able to view videos and so on.. Before I installed the plugin, All that would load is a place holder which looked like the old WMP and would not function properly. However this is what is displayed beside the media which is embedded.
I think that I got the plugin by going to the download page for Safari and looking for plugins. Funny thing was that the plugin that I installed was the one for Firefox on its site that nobody every installs because Firefox gets the plugin if you already have WMP11 installed. Anyway this should solve your problem...with most..
I have noticed just now that PHP served links or applications which launch in their own window and are protected by PHP script do work but still display a lack of functionality showing the Version 6.4 that you are speaking of. I checked it out using the KDGE Live Stream which opens another window, and displays version 11 properly ( in other browsers ), the link which is served is also protected and will close any media player that tries to play it on its own. It soley depends on the script which is coded into the page or window for the player. I can see this method as useful for a corporation as large and well advertised as ClearChannel Productions, because of the lack of bandwidth and cost to the company. Several sources do this and it winds up being an issue for the website administrator and designers to take care of, or update the script, or the person who has written the plugin, which could be from a number of resource; this particular instance would be the author of the WMP Plugin for Firefox.
For any other purpose though the plugin I mentioned above should get rid of ( MOST ) of that problem.
http://www.apple.com/safari/download/plugins.html
Message was edited by: heath28m
This is also a good link for sources and coding issues when embedding WMP.. Hope some of this helps..http://www.codingforums.com/showthread.php?t=50666&page=39
Message was edited by: heath28m

Not able to scale more than 1500 users when using apache (OHS),why ?

Hi,
When scale more than 1500 users, my applications response time degrades.If i use IIS as my webserver I am able to scale more than 3000 users, is there any bottleneck in the oracle apache (OHS) ?
OHS Config
Timeout = 300
KeepAlive = ON
MaxKeepAliveRequests = 100
KeepAliveTimeout = 15
MaxRequestsPerChild = 0
ThreadsPerChild = 5000
SendBufferSize = 16384
MaxClients = 5000
Regards
Vino joy

Hi Jean,
Our application contains customised retail webcenter portal on which retail application is hosted.This portal application is not able to scale up more than 10 users.I had created portal application without the customised framework and then for a similar usecase it is able to scale upto more than 50 users but once it hits 100 VU mark it starts giving errors.If it were an issue with client tokens or login,I would have been able to have more than 1 user at a time.It seems to be an issue with custom framework developed on top of webcenter portal.I have faced a similar issue while testing for this app with jmeter also.I was able to test for the webcenter portal app without any customisation for more than 100 concurrent users. But I was not able to test for more than 1 user for customised retail webcenter portal
Thanks,
Ritesh
Edited by: user766882 on Aug 21, 2012 8:25 AM
Edited by: user766882 on Aug 21, 2012 8:33 AM

Windows AD user cannot use Promotion management, Why?

Similar Messages

Maybe you are looking for