3D Line Graph.vi not displaying line connecting data points.

I'm having trouble getting 3D Line Graph.vi to display the line connecting my data points. I'm collecting latitude, longitude, and depth data from a binary file, loading this data into arrays with a while loop, and sending those arrays to 3D Line Graph.vi. When I tried doing it with arrays created by random number generators, the line is displayed, but when I use it with my actual data, no lines are displayed. I can only see where the data points are when rotating the 3D graph. Any ideas on this would be appreciated.
Thanks,
Morgan
Attachments:
Plot Depth.PNG ‏61 KB

Karunya,
Thanks for the info on the 3-D Curve VI. I tried it and it works. I think I was able to find the problem with 3D Line Graph.vi. It has something to do with plotting very close points away from the origin and scaling the axes to view the line. I have attached an example of where the vi breaks down. In this example, you can see that part of the line is drawn, but when you rotate the graph, you can see that the line is not drawn through all of the points. If you change the scale of the axes, then you eventually get the line to go through all of the points, but then the graph is not very "readable" at that point. It's when you try to zoom in really close to the plotted points.
Thanks!
Morgan
Attachments:
3d Line Graph Error.vi ‏16 KB

Similar Messages

Xml publisher graph is not displaying

Hi All,
I have created xml report which is having graph .It display through oracle apps(conc pgrm ) properly in test instance but after moving to production graph is not displaying .for that i have checked Xserver setup also everything is working fine.
Can any body tell me other possible reason and solution urgently .
Regards
RLRaj

Hi,
Use <?start:body?> for defining your header and it will repeat on every page.
Also add <?end body?> as closing, for footer logic.
BR
Magnus

My I Pod touch 4th gen does not display as connected when I enter i Tunes

My I Pod touch 4th gen does not display as connected when I enter i Tunes, although my battery is being charged and my computer recognizes it, the problem persists. I have also tried the apple troubleshoot for this, but it hasn't worked.

What Apple troubleshooting did you try? This one?
iOS: Device not recognized in iTunes for Windows
B-rock

Why is RoboHelp not displaying the required data content of .chm when linked as Help in my App ?

Gorgeous Hello All,
Has anyone encountered the below-said show- stopper. Another BIG TIME help required, will help me in tremendous fashion.
Am using Adobe RoboHelp, Version 10 and IE version being 10.
In my local machine :
1.)I have completed my technical writing courtesy Design editor
2.)Generating chm File : View -> Pods –> Single Source Layouts -> Right Click on Microsoft HTML Help -> Tagged Set as Primary Layout
3.)Generating Primary Layout : File -> Generate -> Primary Layout (Microsoft HTML Help)…
4.)Viewing Primary Layout : File -> View -> Primary Layout
Everything works FANTASTICALLY till here with the required output (as Hide, Back, Refresh, Home, Print, Options, Contents, Index, Search, Glossary and with the data contents)
Show Stopper, At my Application Server :
5.)I copy the entire robohelp project folder from my local machine to my application Server path
6.)My Application has been developed in ASP .NET, Version 4.0.
7.)Help link has been created in this application wherein here the file name of < >.chm has been linked in the code to be read from the Server’s RoboHelp project folder\!SSL!\ Microsoft_HTML_Help\
8.)I login into my above-said application -> click on the Help page -> Displays the required structure /buttons as Hide, Back, Refresh, Home, Print, Options, Contents, Index, Search, Glossary
a.)Clicking on any of the Books or Topics appearing beneath Contents : The System prompts out with error cautionary message called “ Navigation to the webpage was cancelled. What you can try: Retype the address ”
*** This is a huge SHOW-STOPPER. I spent plenty of hours on this, but unable to deciper with a solution at all) ***
( Note : Am able to directly open and read the required data contents by Clicking on any of the Books or Topics appearing beneath Contents from Server’s RoboHelp project folder\!SSL!\ Microsoft_HTML_Help\ < >.chm )
Why is the RoboHelp not displaying the required data contents of <>.chm when linked as Help in my Application ?
Cheese – Vipin Nambiar

If you looked at the error message and searched the forum, you should find the answer as this is a problem that started in 2005. You should not run CHM files from a server and cannot without editing the users registry. See the page below.
http://www.grainge.org/pages/authoring/chm_mspatch/896358.htm
All along your questions have been based on webhelp, why suddenly are we going go CHMs.
See Snippets on my site for the correct form of help to use in different scenarios.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

HT4157 I have an iPad 2 and it does not display the cellular data button under settings

I have an iPad 2 and it does not display the cellular data button under settings. It does display a Bluetooth button in its place. I have tried the reset but no luck

Is the iPad the Cellular version? Does it have an active Data plan? Does it have a Sim card installed in inside it?

Interpolated Data-Connecting Data Points

Does anyone know how to connect data points that are not sequential? For example, if I have a column with 15 cells and data in cells 1, 5, 8, 10, and 15. When I chart that data, I want those points to be connected with a line, rather than plotted as individual points. In Excel, you select interpolated from the main preference menu under charts. I've searched interpolation and have not found anything. I'm wondering if this function is called something different in Numbers?

The first method I posted works well if you don't need the "blank" categories/rows taking up space on your chart. But if you need to see the "blank" categories/rows, I have a table that I think will do a straight-line interpolation for you. I'm not sure it is error free but, if not, it'll be obvious when you chart it. I'm also not sure it was the simplest way to do it but a lot of the complexity was a result of my making it easy to add new rows to the bottom. I tend to brute force things so if someone has a simpler solution, I hope they post it.
Copy the table to your spreadsheet. Copy your data to the X and Y columns and your category labels to Column A. If you only have Y data then the X's must be a numeric series (like what's in the table now). Plot your X-Y (or Y-only) data as one series and the interpolated column as another series. Change the interpolated data points to "none" and change the line color if you want to (which I did not do below).
http://files.me.com/pwb3/zk3o46.numbers.zip

Photoshop window does not display unless connected to external monitor

I use a MBP connected it to an Apple Cinema Display used as an external monitor (not a dual display) when in my studio.
When I use Adobe Photoshop CS 5 without the monitor the image window does not display on the MBP. If I plug the external monitor in, the window is displayed correctly on the MBP. Photoshop is opening and "displaying" the image window offscreen. Nothing gets it back onscreen, except plugging in the external monitor.
I often use Photoshop away from my studio so this is a big problem. PShop is essentially unusable unless connected to an external monitor.
Is this a known issue?
Any workarounds?
Any ideas?
There is a previous discussion on this topic from January 2012, but it remains open and unanswered. Hoping there are some new ideas. Thanks for the help.

The MacOS still thinks the second display is available and valid -- so Photoshop puts the documents on the last used display and the OS doesn't give any errors.
Once the OS notices the change in display configuration, Photoshop should go back to the main display and force images and dialogs back to the main display.
Applications rely on the OS for the display configuration, and sometimes the OS gets confused or holds onto outdated configurations a bit too long...

Urgent: Graph can not display

Hi,
My report can not display graph correctly if I view the report from report server in html format, because the graph url use report server's hostname, not IP. If I use IP view the graph, there are no problem.
So my problem is how to config the report server for the graph display correctly?
I tried to modify the IMAGEURL in rwservlet.properties, it doesn't work.
I tried to modify the hosts file in local maching to mapping the report server hostname and IP, the praph can display, but it's not a good idea for all user to config their client maching .
Thanks in advance.
report url:
http://172.20.137.205:7777/reports/rwservlet?htportalconn&destype=cache&desformat=HTMLCSS&report=usage_report.rdf&p_conn_string=htportalconn&P_Bill_Period=200806&p_report_id=41
graph url in report (can not display):
http://hk8sp202:7777/reports/rwservlet/getfile/HW/YX+J7DBjNFKgUnojRyFXmKwm2qqSnwR277aMm/561014461.jpg
if replace the hostname with IP in graph url, graph can display:
http://172.20.137.205:7777/reports/rwservlet/getfile/HW/YX+J7DBjNFKgUnojRyFXmKwm2qqSnwR277aMm/561014461.jpg
Sammy
Edited by: Sammy Song on Sep 8, 2008 12:54 AM

Hello Anek,
Refer to SAP Note 704604 and 454042.
Also,
http://help.sap.com/saphelp_nw04/helpdata/en/76/41d43ab8029b66e10000000a114084/frameset.htm
and
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/4846ac90-0201-0010-099d-d3b4e271849c
regards
Atul Shrivastava
PS:Award points for helpful answer.

Sharepoints not displayed when connecting via FTP

Hi All,
Leopard Server 10.5.8 xserve 2 G5
I have an issue with the built in FTP server.
All my share point are set to be shared via FTP, yet they are not displayed when users log in and access the server via FTP.
In Server Admin, Authenticated users see: FTP Root and Share Points.
All relevant users have access to the FTP service, in the server settings.
ACL permissions have been set correctly for those users.
This is *sudo sharing -l* tells me, for all share points.
name: Archive
path: /Volumes/External RAID/Archive
afp: {
ftp: {
name: Archive
shared: 1
guest access: 0
smb: {
Is there anything that I missed?
Thanks for you help,
Johan
Message was edited by: JohanDouma

Hi,
Sorry for the late respons.
My config:
1 mac mini with OSX Server leopard
1 airport extreem
1 external HDD LaCie
An airport Extreme has the posibility to share a network drive. So I plugged in my HDD into the airport extreme and configured the thing.
Than I turned to the mac mini. And started configuring my sharepoints.
So one of my sharepoints is the external HDD.
There are several directories on there that I want to make available thru the legacy protocol FTP.
So by just making these sharepoints available thru FTP i expected for these sharepoint to show up in mij directories if I connect to my external IP with a FTP client like CyberDuck.
(portforwarding and everything is not the problem, because I can make a connections and all directories show up as browseable.
But the sharepoint I made on the network drive just show up as an bin or another kind off file I can't open.
Everything else is browsable..
They show up by the way in the root dir of the FTP Server as regular symbolic links.
Thru Finder I can browse them and do everything. But as soon as i connect over the internet, lan or whatever, these symbolic links are not the access point towards the directory underneath.
They show up with the correct name just not as an dir I can open.
Hope this helps
Grtz and thnx
(typed on an iPad and not fully used to it)

WPF Intensity Graph gridlines not visible on plotted data

Hi, I need to break up my intensity graph data into a visible grid. Please advice on how this can be accomplished.
Thank you

Although you can configure the grid lines to appear above the plots, to draw in between the data points you will want a custom renderer. I have attached an example grid renderer, which you can customize to fit the data you display. If you add an instance of GridRenderer to the Children collection on your graph, it will draw grid lines for each axis passed to the constructor.

Connect data points on scatter graph

I currently have a scatter graph to represent the cross section of a creek. I want to connect the data points so that it looks like a line graph.
However, I cannot find an option in the inspector to do this.
Thanks
[IMG]http://i812.photobucket.com/albums/zz49/frusciantaya/Screenshot2010-07-31at72002 PM.jpg[/IMG]

PacoA wrote:
How to do it (format scatter charts) in numbers '09?
Open Numbers '09 Users Guide.
Type 'format scatter charts' (without the quotes) in the search box.
Click on the most useful looking (and in this case, only) item in the list.
Regards,
Barry
PS: The Numbers '08 forum isn't the right place for a Numbers '09 question.

Web Application Designer (Line Charts-Data Points)

Hi
I have to display the query in WEB as a Line Chart
The Query is on Cal Day Vs Mean Value
The user enter the Cal Day (From/To)..the Line chart is supposed to display mean Value on No of Cal Days users choosed.
In query created variable for Cal Day..but how can i define the Data Points for the chart in the Web designer.
Bydefault we have to specift no of data points we required..how can i change that to be based on the range user entered
Than ks

Hi Krishna,
When you define a chart, you define a number of series, but when you run the WAD, it takes the number of series it has the query.
Regards,
Diego

HTML tags not displayed when using Data Template

Hi All...
I'm developing a BI Publisher report in which one of the columns is a clob data type. I'm using an xsl stylesheet to format the data present in the clob column.
I've developed the report using data template as the data set. The problem is the clob column which has the HTML tags where not displayed properly...for example
the tag starting with
<
is replaced with
& lt;
I did a couple of searches in this forum and in tim's blog but couldn't find a proper solution...
http://blogs.oracle.com/xmlpublisher/2007/01/formatting_html_with_templates.html
API and HTML Formated Content
Re: Problem with text data elements containing escaped HTML codes
HTML Output from CDATA
Re: HTML formatted output
Re: Special characters in CLOB are making report fail
Re: Formatting of HTML tag problem
I'm using BI Publisher standalone:Release 10.1.3.2. In one of the threads..
Re: Special characters in CLOB are making report fail
I came to know that data template cannot generate proper HTML tags for release 10.1.3.2. Is there any work around way to get the proper HTML tags when data template is used as a data set?
Thanks in Advance...
Edited by: user10280715 on Dec 9, 2008 3:13 PM

Issue could be with the data that is selected in the other environment. It generally happens that the ALV will not give the same results as in the DEV in the other systems.
Possible errors could be the control break statements in the loop...endloop block. validate the correctness of the control break stmts if any.

Flash line chart: manipulating the line and data point

In Apex 3.1 Flash line chart
Is there a way to change the line thickness and suppress the circular data point? We think it looks cartoonish and ugly especially when there are many data points.
Thanks,
Fred

Hello,
Use Custom XML in the Chart attributes and replace the line_chart section with:
      <line_chart left_space="5" right_space="5">
        <block_names enabled="no" />
        <dots type='circle' radius='2' />
        <lines size='1' auto_color='yes' tone='0xFFC700' color='0xC1C1C1' />
      </line_chart>I've put the example here also: http://examples.apex-evangelists.com/pls/apex/f?p=286:34:0
If you come to ODTUG, OOW or our "European Apex Training Days" I'll go into more depth about all this.
Regards,
Dimitri
-- http://dgielis.blogspot.com/
-- http://eurotraining.apex-evangelists.com/
-- http://apexblogs.info/

Line charts: data point symbol resize?

I'm working with charts in Pages and would like to be able to have a greater variety of lines in my line chart. In addition to selecting the data point symbol (square, circle, etc), I wish I could resize that symbol. I know I can resize the line width from the Graphic tab of the Inspector.
Is there a way to shrink the data point symbol from the Inspector? From anywhere?

If I understand your question, this from the Pages online help may give the answer:
To mark line, area, and scatter charts with data point symbols:
Select the entire chart. You can also select the chart series (the line or area shape) that you want to mark with data point symbols.
Click Inspector in the toolbar, and then click the Chart Inspector button.
Click Series (except for scatter charts).
Choose a symbol from the Data Point Symbol pop-up menu.
Choose one of the following options from the Symbol Fill pop-up menu:
To fill the symbol with the same color as its outline, choose Use Stroke Color.
To fill the symbol with a solid color, choose Color Fill, click the Fill color well, and pick a color.
To fill the symbol with a gradient, choose Gradient Fill and use the gradient controls to set the colors and change the angle of the gradient.
To fill the symbol with an image, choose Image Fill and select the image you want. You can also resize the image by choosing an option from the pop-up menu above the Choose button.
To fill the symbol with a tinted image, choose Tinted Image Fill and select the image you want. Click the color well to the right of the Choose button to change the tint color. You can also resize the image by choosing an option from the pop-up menu above the Choose button.

3D Line Graph.vi not displaying line connecting data points.

Similar Messages

Maybe you are looking for