3D surface spherical integral

Hi,
I am like would to know how to integrate a 3D surface for a specific solid angle in spherical co-ordinates (for example, a solid angle subtened by a 'lens'). The 3D surface is in cartesian co-ordinates. I am able to convert the 3D surface from cartesian to spherical co-ordinates, but I am having problems with displaying them in 3D surface graph (in spherical co-ordinates mode).
It would be nice if somebody can help me out.
I have attached two files. 1) Screen shot of the program, 2) Actual program.
The program creates a parametric ellipsoid surface in Cartesian co-ordinates and converts into Spherical co-ordinates. I need to then perform integration (which is not included).
Attachments:
Forum.png ‏156 KB
3D surface.vi ‏1625 KB

Hi Peter,
here are the two missing sub VIs. Hope it works now.
Attachments:
Ramp.vi ‏17 KB
DegRad.vi ‏17 KB

Similar Messages

Lync 2013 & Surface Pro -- Video Cameras unusable "Can't connect to this camera"

Anyone encounter issues where you cannot use Surface Pro integrated cameras with Lync client?

Yes, encountered the same problem. You found a solution?

How to apply a picture of human face onto spherical surface with 3D tools?

I’m learning Photoshop CS5 3D features and looking for guidance/steps for the following task:
With the 3D set of tools, to create a sphere with shiny surface and apply (paste?) on this spherical surface a photo of human face.
I need to do it in such a way that the human face following the spherical surface will get appropriately distorted by shape of the sphere.
I've tried to do this with the help of Pshop manual but did not manage- I'm too new to this 3D features,sorry...
No video tutorials, please - I need just to read the material and follow .
Can someone skilled in Photoshop CS5 3D tools , please, help me with this task?
Thank you in advance!

Gloria,
1.— Bold type is harder to read on screen, Try to use it only sparingly to add emphasis to a word or concept only. Thank you.
GloriaMo wrote:
…apply (paste?) on this spherical surface…
2.— If you used email to post your question, please be advised that you cannot upload an image to the forum by email. It will just disappear into cyberspace and no one will be able to see it. These forums are designed primarily to be accessed by a web browser through their web interface, not by email. Another disadvantage of email is that you will never see the edits other make to their posts, so it will be easier for you to be misled when someone corrects an error contained in their original reply and the correction(s) they make will not reach you by email.
To embed an image in your post, you need to be signed in to the forum and use the camera icon in the Reply Editor of the web interface of the forum.
Thank you.
Wo Tai Lao Le
我太老了

How can I dot some pionts on spheric surface in "3D parametric surfaceGraph"

HI
I have built a spherical to Cartesian coordinates(like the picure sample).
When I finished the sphere I need to dot some points(like the picture sphere),
There're 2 idea to actualize.
One is Draw multi 3D surface,first is sphere,another is some points,but I want the pionts is dynamic ,they're dotted one after one that looks like a queue.The idea is not satisafy.
The other idea for me is Replace some point in Sphere Array,
But I want the sphere looks like fixed and silent,points is dotted one after one as a dynamic scaning.
How can I resolve the problem????
*The best Chinese farmer*
Attachments:
sample.JPG ‏15 KB
sphere.JPG ‏36 KB

HI Paulbin,
I see you also posted here.
http://forums.ni.com/ni/board/message?board.id=170&message.id=190771#M190771
It sounds like you want to post one plot and then add another as the data comes in. If so, please take a look at my postings that start with rely #7 of this thread.
http://forums.ni.com/ni/board/message?board.id=170&message.id=143663&jump=true
It is a "worse case" example but amoung other things, I show how to add new plots and manipulate their properties.
If that does not help, please post some demo code so other can jump in and help.
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction

Integration of bulletin board and microsoft surface?

Does Toshiba think of an integration of bulletin board with microsoft surface?
That would be very cool!

Unfortunately I cannot comment your question but want to say that I like your postings and your comments.
On this forum there are no much people who made some suggestion how to make things better.
It would be nice that Toshiba pay more attention to own customers.
Lets see what will happen with bulletin board. Anyway, I can imagine that Toshiba will continue to develop it adding new features.

Surface Pro 3 with MDT deployed 8.1 Enterprise integrated Update 1 missing power button?

I am building / deploying an image for Surface Pro 3. Out of the box the Surface Pro 3 has the power button on start screen next to search button. However when I deploy 8.1U1 Ent the button disappears. Reading
http://winsupersite.com/windows-8/windows-81-update-1-tip-toggle-power-button it appears depending on if the Surface Pro 3 is defined as Slate or Ultrabook it might or might not default to power button being on. Is this expected behavior, anyone else see
this?

Luckily I found
http://blogs.technet.com/b/askcore/archive/2014/07/15/deploy-windows-to-surface-pro-3-using-microsoft-deployment-toolkit.aspx which goes into more detail and has workarounds for deploying Surface 3.

How do I surface language specific texts in Integrated ITS?

Hello all,
I'm new to both stand alone and integrated ITS and am researching the upgrade process. In our stand alone templates we used htrc files with our html templates to show language specific texts.
Example.
html template code for a field label
`if (i==2) DETAIL-FLABEL[2]= #KAFN end`
htrc name value pair
z_pz01_en.htrc
KAFN Known As First Name
z_pz01_de.htrc
KAFN Bekannt unter dem Vornamen
I see no hint that htrc's can be used in integrated and am not seeing anything in the way of resource based language texts in integrated. I think I've hit every document out there yet, I have a feeling I'm missing something obvious. Your help is appreciated.
Doug

Edgar,
Thanks so much for the detail!
I have run through the steps for manual creation of translations as well as SIAC_UPLOAD of htrc files and have it working and documented. I will add a few more findings here for others who find this post later.
Some of our old htrc files had duplicate keys (probably from original German version). In stand alone ITS the last key in the file was used so this didn't matter. In integrated ITS this matters for 2 reasons.
1 Uploading/Converting htrc files having logged in in English will cause failures if any of the text being entered in the service parameters has characters that arent consistent with the codepage being used for EN. (Ex. back Azureück). Clean up htrc files to use only the language they should contain.
2 Stand alone ITS was forgiving of htrc files containing duplicate keys. Integrated ITS is not. Remove all duplicate keys.
3. This one is obvious but... if parameters have already been entered in another language you may be prompted to confirm you are changing language and there are several prompts along the way. As these prompts will appear in the logon language itu2019s important to eitheru2026
a. Be fluent in all supported languages , oru2026
b. Memorize button and menu positions.
I do have one additional question.
Our old stand alone setup had an alternate corporate "APCI" design that we used...
File system view -
hostDEV_WWWmimesdesigns"apci"webgui as opposed to the out of box
hostDEV_WWWmimesdesignssap_streamlinewebgui I suppose.
I believe this was then referenced in the global services file ~DESIGN="APCI"
I'm starting research to understand if there is an analog to this in the integrated webgui service or precisely what I have to do to accomplish alternate styles for webgui and our Z_services.
Thanks again, points on the way, If I could award more I would.
Doug

Issues re Tascam FW-1082 & FW-1884 control surface - integration with FCP

The joint Tascam/Apple release put out in 2005 touting seamless compatibility between these two products (see below) turns out to be a gross exageration. Basic functions are conceivably compatible, but some do not work and there is a paucity of documentation available. The many buttons and controls on the Tascam's control surfaces are rendered useless. The consumer consumer has been wronged and these are not cheap products. Countless similar posts on this site backs me up on this.
I have the Tascam fw-1884, which has the same setup as the 1082. Have any of you been able to assign quick keys on the tascam using the keyboard customization tool in FCP? I've followed the example on Tascam's support site, but it does not seem to work.
Also, looking for more documentation/tutorials/consultants who can help me master all the features of the Tascam with FCP 5.
Thanks,
David
TASCAM interfaces now compatible with Apple®'s
Final Cut® Pro 5 & Soundtrack Pro
MCP (Mackie Control Protocol) onboard Final Cut Pro 5 allows the use of external audio control surfaces to edit and manipulate audio
Montebello, CA—April 16, 2005—TASCAM's full line of FireWire audio control surfaces and interfaces are now compatible with Apple®'s Final Cut Pro 5 and Soundtrack Pro editing software with Apple's unveiling of the Final Cut® Studio production suite that includes the Final Cut Pro® 5 upgrade.
This major upgrade to the Apple's Emmy award-winning software means that Final Cut Pro 5 and Soundtrack Pro are now fully compatible with MCP (Mackie Control Protocol) devices, so you can use external audio control surfaces— including TASCAM's FW-1884 or FW-1082—to edit and manipulate audio more efficiently.
TASCAM's newest audio controller, the FW-1082, has nine motorized faders for adjusting audio levels during mix playback utilizing the revamped software. Editors can turn up a dialog line or reduce the music level during a voiceover section without clicking on breakpoints. Just grab a fader and go! The transport buttons can be used to start and stop playback in any editor that supports the Mackie Control or Mackie HUI. TASCAM's FW-1082 also has a MIDI fader mode that can be used in programs like Apple Motion 2 to adjust parameters in real-time during playback. And since it's an audio interface as well, producers can record voiceover and sound effects right in the edit suite with professional results.
The FW-1082 has four mic inputs, four line ins and S/PDIF digital in and out – all available at 96kHz. It features 10 inputs, including four balanced XLR mic inputs with phantom power. Eight channel strips each feature a 60mm touch-sensitive moving fader and select/solo/mute buttons, and a moving master fader.
For even more I/O and surface control, the FW-1884 offers 18-channels of inputs (eight analog and eight ADAT digital and two S/PDIF coaxial or optical), eight balanced XLR mic/line inputs with high-quality mic preamps and phantom power, plus nine 100mm motorized touch-sensitive faders.
G4 dual processor 1.25mhz Mac OS X (10.4.6) FCP 5.1.1

So after writing this question I closed the laptop, leaving the Tascam on & connected. Returned 30 mins later to see if anyone had replied (where are you all??!!), opened the laptop & the Tascam suddenly springs to lift, faders move & Soft LCD app shows activity correctly.
So, all appears to be OK although I don't really know why...!!

Surface pro type cover not working

I just installed arch on my surface pro and the touch screen works well, as does the stylus, but the type cover/touchpad doesn't type or function at all. On startup two error messages are shown:
hid-multitouch 0003:045E:07A9:0005: HID_DG_INPUTMODE out of range
hid-multitouch 0003:045E:07A9:0005: No inputs registered, leaving
lsusb shows this:
Bus 004 Device 005: ID 045e:0794 Microsoft Corp.
Bus 004 Device 004: ID 03eb:8209 Atmel Corp.
Bus 004 Device 003: ID 045e:07a9 Microsoft Corp.
Bus 004 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 003: ID 045e:0795 Microsoft Corp.
Bus 003 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 002: ID 0bda:0307 Realtek Semiconductor Corp.
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 004: ID 1286:2044 Marvell Semiconductor, Inc.
Bus 001 Device 002: ID 040b:2000 Weltrend Semiconductor
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
I'm not really sure how to debug this, so any help to get me in the right direction would be great,
Thanks!

As far as I can tell, the answer is buried in this thread: http://ubuntuforums.org/showthread.php?t=2183946

Wifi on Surface Pro - installed with ndiswrapper but not working

Hi there guys.
I have installed Arch on a Surface Pro and most things work well.
The biggest problem so far is wifi - it comes with a 88w8797 Marvell Avastar chipset. I managed to find the drivers and used ndiswrapper to install them.
$ ndiswrapper -l
mwlu97w8 : driver installed
device (1286:2043) present (alternate driver: mwifiex_usb)
The ndiswrapper help page says that one should get rid of alternate drivers before enabling ndiswrapper but I have no clue where to start - that seems to be a kernel loaded module (link) but it really doesn't do much apparently.
I did 'modprobe ndiswrapper' but as you can see below, nothing seems to be really happening
# iwconfig
enp0s20u2u3 no wireless extensions.
lo no wireless extensions.
dmesg returns this on ndiswrapper
$ dmesg | grep ndiswrapper
[ 2.996565] ndiswrapper version 1.58 loaded (smp=yes, preempt=yes)
[ 4.230024] usbcore: registered new interface driver ndiswrapper
The gnome network manager, just like iwconfig, shows no able wireless.
I'm at a loss on what to do, any help is greatly appreciatted
Last edited by OttoRobba (2013-02-21 10:26:50)

The blacklisting was a good call as I had completely forgot to do so. Made a /etc/modprobe.d/blacklist.conf with 'install mwifiex_usb /bin/false' - nothing changed though, the wireless network still won't show.
# lsusb
Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 003 Device 003: ID 058f:6254 Alcor Micro Corp. USB Hub
Bus 003 Device 002: ID 1286:2043 Marvell Semiconductor, Inc.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 003: ID 045e:0795 Microsoft Corp.
Bus 002 Device 003: ID 045e:079c Microsoft Corp.
Bus 002 Device 004: ID 03eb:8209 Atmel Corp.
Bus 002 Device 005: ID 045e:0794 Microsoft Corp.
Bus 003 Device 006: ID 04e8:6863 Samsung Electronics Co., Ltd
# lspci
00:00.0 Host bridge: Intel Corporation 3rd Gen Core processor DRAM Controller (rev 09)
00:02.0 VGA compatible controller: Intel Corporation 3rd Gen Core processor Graphics Controller (rev 09)
00:14.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB xHCI Host Controller (rev 04)
00:16.0 Communication controller: Intel Corporation 7 Series/C210 Series Chipset Family MEI Controller #1 (rev 04)
00:1a.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #2 (rev 04)
00:1b.0 Audio device: Intel Corporation 7 Series/C210 Series Chipset Family High Definition Audio Controller (rev 04)
00:1d.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #1 (rev 04)
00:1f.0 ISA bridge: Intel Corporation HM77 Express Chipset LPC Controller (rev 04)
00:1f.2 SATA controller: Intel Corporation 7 Series Chipset Family 6-port SATA Controller [AHCI mode] (rev 04)
00:1f.3 SMBus: Intel Corporation 7 Series/C210 Series Chipset Family SMBus Controller (rev 04)
It seems ndiswrapper is failing to load - I wonder if there is another module claiming the device?
#dmesg
[ 4.191249] ndiswrapper (import:232): unknown symbol: ntoskrnl.exe:'__chkstk'
[ 4.191274] ndiswrapper (import:232): unknown symbol: ntoskrnl.exe:'MmGetSystemRoutineAddress'
[ 4.191295] ndiswrapper (import:232): unknown symbol: NDIS.SYS:'NdisFreeIoWorkItem'
[ 4.191305] ndiswrapper (import:232): unknown symbol: NDIS.SYS:'NdisQueueIoWorkItem'
[ 4.191326] ndiswrapper (import:232): unknown symbol: NDIS.SYS:'NdisFreeMdl'
[ 4.191336] ndiswrapper (import:232): unknown symbol: NDIS.SYS:'NdisAllocateMdl'
[ 4.191346] ndiswrapper (import:232): unknown symbol: NDIS.SYS:'NdisAllocateNetBufferAndNetBufferList'
[ 4.191356] ndiswrapper (import:232): unknown symbol: NDIS.SYS:'NdisFreeNetBufferList'
[ 4.191366] ndiswrapper (import:232): unknown symbol: NDIS.SYS:'NdisFreeNetBufferListPool'
[ 4.191376] ndiswrapper (import:232): unknown symbol: NDIS.SYS:'NdisAllocateNetBufferListPool'
[ 4.191386] ndiswrapper (import:232): unknown symbol: NDIS.SYS:'NdisMAllocatePort'
[ 4.191403] ndiswrapper (import:232): unknown symbol: NDIS.SYS:'NdisMIdleNotificationComplete'
[ 4.191413] ndiswrapper (import:232): unknown symbol: NDIS.SYS:'NdisMIdleNotificationConfirm'
[ 4.191423] ndiswrapper (import:232): unknown symbol: NDIS.SYS:'NdisMFreePort'
[ 4.191432] ndiswrapper (import:232): unknown symbol: NDIS.SYS:'NdisMNetPnPEvent'
[ 4.191443] ndiswrapper (import:232): unknown symbol: NDIS.SYS:'NdisMIndicateReceiveNetBufferLists'
[ 4.191453] ndiswrapper (import:232): unknown symbol: NDIS.SYS:'NdisMSendNetBufferListsComplete'
[ 4.191463] ndiswrapper (import:232): unknown symbol: NDIS.SYS:'NdisMOidRequestComplete'
[ 4.191473] ndiswrapper (import:232): unknown symbol: NDIS.SYS:'NdisMIndicateStatusEx'
[ 4.191483] ndiswrapper (import:232): unknown symbol: NDIS.SYS:'NdisMSetMiniportAttributes'
[ 4.191493] ndiswrapper (import:232): unknown symbol: NDIS.SYS:'NdisSetOptionalHandlers'
[ 4.191504] ndiswrapper (import:232): unknown symbol: NDIS.SYS:'NdisAllocateMemoryWithTagPriority'
[ 4.191514] ndiswrapper (import:232): unknown symbol: NDIS.SYS:'NdisOpenConfigurationEx'
[ 4.191523] ndiswrapper (import:232): unknown symbol: NDIS.SYS:'NdisFreeTimerObject'
[ 4.191533] ndiswrapper (import:232): unknown symbol: NDIS.SYS:'NdisCancelTimerObject'
[ 4.191543] ndiswrapper (import:232): unknown symbol: NDIS.SYS:'NdisSetTimerObject'
[ 4.191599] ndiswrapper (import:232): unknown symbol: NDIS.SYS:'NdisAllocateIoWorkItem'
[ 4.191613] ndiswrapper (import:232): unknown symbol: NDIS.SYS:'NdisMRegisterMiniportDriver'
[ 4.191623] ndiswrapper (import:232): unknown symbol: NDIS.SYS:'NdisMDeregisterMiniportDriver'
[ 4.191648] ndiswrapper (import:232): unknown symbol: NDIS.SYS:'NdisAllocateTimerObject'
[ 4.191663] ndiswrapper (load_sys_files:199): couldn't prepare driver 'mwlu97w8'
[ 4.191827] ndiswrapper (load_wrap_driver:121): couldn't load driver 'mwlu97w8'
[ 4.191926] usbcore: registered new interface driver ndiswrapper

Can we access CM 14.0.2 on the Microsoft Surface Pro 3? It will have Microsoft 8.1 Pro on it.

My name is Cynthia and I work for Chicago Public Schools. We have approximately 400 users of the Primavera CM system. We've had challenges along the way with compatibility issues, but now here's a question I don't have an answer to.
Is the Surface Pro 3 any different and what are the Java requirements?

Hi Cynthia, Unfortunately CM 14.0.x has not been tested/certified against Win 8.1 as a web app server. Also there is no certification for integrating CM with MS Surface Pro. For more further information, please submit a SR within CM tech support. Regards, Matías G. Uribe.

Avid MC Transport Control Surface now working in CS 5.5

Not sure if anyone is interested, but because Adobe doesn't have a EUCON integrated support, it greatly limits the control surfaces that can be used with it.
I googled a bunch of different things but in the end it seems like the general conclusion was that the MC Transport doesn't work with Premiere Pro, not a big deal if you don't have one, but really sucks if you do have one and use Premiere for a lot of your work.
However, following the age-old adage of "never say die" I finally figured out a work-around that has my Avid MC Transport working pretty darn good with Adobe Premiere CS 5.5 on my Mac.
I posted it here: on creative cow where you can see the whole thread: http://forums.creativecow.net/readpost/3/911511
Hi Andree,
I had the same problem but figured it out, you can see it here http://wp.me/p1hbRg-e
or I'll paste it here for you as well:
I recently made the switch from PC to MAC for the long-form documentary I'm making. A decision that so far, I definitely regret. But more on that later.
For the moment I thought I'd start posting notes about problems I've run into and solutions to them that I've found in case any one else runs into these same problems.
I purchased the Avid/Euphonix MC Transport for use in my editing as having a jog/shuttle definitely speeds things up remarkably once you are accustomed to them.
However I didn't notice that Adobe Premiere was not supported and this is my editing program of choice although I do have FCP and Media Composer 5.52.
I googled around and even contacted Euphonix/Avid support and no one seemed to have a solution.
In frustration I then ordered a Contour Shuttle Pro v2 (which is sort of like downsizing from a Porche to a Honda. Both great cars, but which one would you kick out of bed first? Exactly.)
So while waiting for international shipping I tried a bit of a wild idea and I installed the drivers for both the Bella Pro Premiere keyboard (which I don't have) and the Contour Shuttle (which I don't have either) and then began customizing the MC Transport commands to match the command keys in Adobe Premiere.
As a note; you might not need to do this on your system. I'm using a Mac 12 core and this workaround only worked once I installed those drivers but logically speaking you shouldn't need to do it.
And hey! It works!!!!
Some things aren't as perfect as they are in Avid or FCP such as the shuttle wheel shifting to different speeds smoothly. But damn! The jog wheel works perfectly.
Customizing the Soft Keys just involves ensuring that Adobe Premiere Pro CS 5.5 is open and then choosing the soft key around the wheel and once it is highlighted in the EUCON controller, then assigning a KEY command.
For example your center three keys above the jog wheel should have J, K, and L assigned accordingly.
And however you wish to customize it after that. I use for cutting at timeline (CTRL + K), next edit (page down), previous edit (page up) and it is working like a charm.
All the other soft keys including shift command respond the same.
To program the jog wheel. Select it and choose Command, select Wheel from the drop down, then select jog right and choose special command and pick "right arrow" and then repeat for select jog left and choose special command and choose "left arrow."
The shuttle you have to choose the shuttle and again add a wheel command and then in choose shuttle and create a new shuttle wheel command. Then from shuttle drop down, choose for Section 0 add key and set it to K (stop), then for Shuttle Section 1 add L key once and for each shuttle section add one more L key. Shuttle section 7 has LLLLLLL assigned to it.
For the shuttle -1 Section choose J and for each minus section following that add one more J.
It's not perfect but it certainly does what I need it to do!
Hope that helps anyone else out there.
Best,
Darius

Thanks Pepe, seems to be a quick workaround! (FWIW in Logic 7.1, the command I see is Logic→Preferences→Control Surfaces→Rebuild Defaults. I assume that's what you're referring to.)
It'd be great if Apple/Tascam fixed this, but it only takes a second to rebuild the devices, so it's no biggie.

[Forum FAQ] How do I send multiple rows returned by Execute SQL Task as Email content in SQL Server Integration Services?

Question:
There is a scenario that users want to send multiple rows returned by Execute SQL Task as Email content to send to someone. With Execute SQL Task, the Full result set is used when the query returns multiple rows, it must map to a variable of the Object data
type, then the return result is a rowset object, so we cannot directly send the result variable as Email content. Is there a way that we can extract the table row values that are stored in the Object variable as Email content to send to someone?
Answer:
To achieve this requirement, we can use a Foreach Loop container to extract the table row values that are stored in the Object variable into package variables, then use a Script Task to write the data stored in packages variables to a variable, and then set
the variable as MessageSource in the Send Mail Task.
Add four variables in the package as below:
Double-click the Execute SQL Task to open the Execute SQL Task Editor, then change the ResultSet property to “Full result set”. Assuming that the SQL Statement like below:
SELECT   Category, CntRecords
FROM         [table_name]
In the Result Set pane, add a result like below (please note that we must use 0 as the result set name when the result set type is Full result set):
Drag a Foreach Loop Container connects to the Execute SQL Task.
Double-click the Foreach Loop Container to open the Foreach Loop Editor, in the Collection tab, change the Enumerator to Foreach ADO Enumerator, then select User:result as ADO object source variable.
Click the Variable Mappings pane, add two Variables as below:
Drag a Script Task within the Foreach Loop Container.
The C# code that can be used only in SSIS 2008 and above in Script Task as below:
public void Main()
   // TODO: Add your code here
            Variables varCollection = null;
            string message = string.Empty;
            Dts.VariableDispenser.LockForWrite("User::Message");
            Dts.VariableDispenser.LockForWrite("User::Category");
            Dts.VariableDispenser.LockForWrite("User::CntRecords");
            Dts.VariableDispenser.GetVariables(ref varCollection);
            //Format the query result with tab delimiters
            message = string.Format("{0}\t{1}\n",
                                        varCollection["User::Category"].Value,
                                        varCollection["User::CntRecords"].Value
           varCollection["User::Message"].Value = varCollection["User::Message"].Value + message;
           Dts.TaskResult = (int)ScriptResults.Success;
The VB code that can be used only in SSIS 2005 and above in Script Task as below, please note that in SSIS 2005, we should
change PrecompileScriptIntoBinaryCode property to False and Run64BitRuntime property to False
Public Sub Main()
        ' Add your code here
        Dim varCollection As Variables = Nothing
        Dim message As String = String.Empty
        Dts.VariableDispenser.LockForWrite("User::Message")
        Dts.VariableDispenser.LockForWrite("User::Category")
        Dts.VariableDispenser.LockForWrite("User::CntRecords")
        Dts.VariableDispenser.GetVariables(varCollection)
        'Format the query result with tab delimiters
        message = String.Format("{0}" & vbTab & "{1}" & vbLf, varCollection("User::Category").Value, varCollection("User::CntRecords").Value)
        varCollection("User::Message").Value = DirectCast(varCollection("User::Message").Value,String) + message
        Dts.TaskResult = ScriptResults.Success
End Sub
Drag Send Mail Task to Control Flow pane and connect it to Foreach Loop Container.
Double-click the Send Mail Task to specify the appropriate settings, then in the Expressions tab, use the Message variable as the MessageSource Property as below:
The final design surface like below:
References:
Result Sets in the Execute SQL Task
Applies to:
Integration Services 2005
Integration Services 2008
Integration Services 2008 R2
Integration Services 2012
Integration Services 2014
Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.

Thanks,
Is this a supported scenario, or does it use unsupported features?
For example, can we call exec [ReportServer].dbo.AddEvent @EventType='TimedSubscription', @EventData='b64ce7ec-d598-45cd-bbc2-ea202e0c129d'
in a supported way?
Thanks! Josh

Which control surface do you use, would like to use or have used for audio?

I am shopping control surfaces for mixing audio in Premiere Pro CC. I am buying used so I would sure like to get it right the first time. I am looking for feedback from those who have used a control surface as well as those who have just looked around. I have searched high and low for information from Premiere Pro users but have found very little. Even the Audition folks have not shared much information about experiences with audio control surfaces.
Here are some consoles I've looked at but cannot determine compatibility (due to lack of information):
Mackie Control Universal MCU Pro 8
Digidesign Command 8
Digidesign Digi 002 Pro Tools Console
M-Audio ProjectMix I/O Control Surface
Icon QCon Pro USB Midi Controller Station
Behringer B-Control Fader BCF2000
Radikal Technologies SAC 2.2 DAW controller
Avid Artist Mix Control 8 Fader Euphonix DAW Mixing Control Surface
Tascam FW-1884 Firewire Control Surface
Tascam FW-1082 Firewire Control Surface
CM Labs Motormix
CM Labs Motormix 2
CM Labs MotorMate
Novation ZeRO SL MkII MIDI DAW Control Surface
Nektar Panorama P1 USB Midi DAW Control Surface
Alesis Master Control
If you have experience with any of these consoles, or have any to add to the list, specifically with Premiere Pro, please leave a note here. I believe there will be others who will check this discussion looking for the same answers as I. Documentation of these control surfaces is very thin when it coms to discovering if they are MCU or EUCON protocol (or other) - and even if I was able to discern a flavor I still do not know which features will work in Premiere, such as transport controls, faders, plug-in modifiers, et al.
So I guess my goal here is to come up with a list of work/don't work features for each of these control surfaces and more so we can make informed bang for the buck decisions. My budget for a used control surface is $300-400, but I'd be willing to go to $500-600 or more if the features/integration were significantly better.
Thanks!

Here is the list with the responses I have received from the manufacturers, (3) so far.
Mackie Control Universal MCU Pro 8
The MCU Pro uses three different types of MIDI operating protocols (Mackie Control, HUI, and Logic Control). We have not tested the MCU Pro here in Tech Support with Premiere Pro. You will want to contact Adobe directly to see if they support the Mackie Control, HUI or Logic Control protocols with the Premiere Pro software. It is up to the manufacture of the software on how well these MIDI operating protocols are implemented into the software. With contacting Adobe directly you will be able to see what control surfaces are supported with their software.
Digidesign Command 8
Digidesign Digi 002 Pro Tools Console
M-Audio ProjectMix I/O Control Surface
The Project Mix I/O is a discontinued product. However, it should work properly with basically any DAW program. I can't speak to specifically Premiere Pro, but we have a few customers who use that combination and those customers report it works just fine.
Icon QCon Pro USB Midi Controller Station
Behringer B-Control Fader BCF2000
Thank you for your email! Yes, you are able to use the BCF2000 to control Adobe Pro CC. YOu will need to program the controller into Mackie Emulation mode. Mackie Emulation will allow full functionality within your software. Attached you will find a PDF showing each emulation mode. Here are a few informative links explaining setup and application:
http://forums.adobe.com/thread/1286249
http://helpx.adobe.com/premiere-pro/using/control-surface-support.html
The former will provide a better understanding of connectivity.
Radikal Technologies SAC 2.2 DAW controller
Avid Artist Mix Control 8 Fader Euphonix DAW Mixing Control Surface
Tascam FW-1884 Firewire Control Surface
Tascam FW-1082 Firewire Control Surface
CM Labs Motormix
CM Labs Motormix 2
CM Labs MotorMate
Novation ZeRO SL MkII MIDI DAW Control Surface
Nektar Panorama P1 USB Midi DAW Control Surface
Alesis Master Control

Error Message on Surface Pro 3 Device

Symptom:
When going to Control Panel --> Mail --> Data Files --> Add --> and add any PST file found on shared network folder, I get the following error message: "Windows Shell Common DLL has stopped working. - A problem caused the program to stop
working correctly. Windows will close the program and notify you if a solution is available."
The only option I get is Close program.
Going into Event Viewer --> Windows Logs --> Application, I see the following error logged in (pulled from Details - Friendly View):
Source: Application - Event ID: 1000 - Task Category (100)
System
Provider
[ Name]
Application Error
EventID
1000
[ Qualifiers]
0
Level
2
Task
100
Keywords
0x80000000000000
TimeCreated
[ SystemTime]
2015-03-18T23:10:58.000000000Z
EventRecordID
21829
Channel
Application
Computer
CSWIN81-YoshiSP.calsoft.com
Security
EventData
rundll32.exe_shell32.dll
6.3.9600.17415
54504eb8
KERNELBASE.dll
6.3.9600.17415
54505737
80000003
00000000000de002
1208
01d061d0a31406d8
C:\WINDOWS\system32\rundll32.exe
C:\WINDOWS\system32\KERNELBASE.dll
08e19114-cdc4-11e4-8281-281878badb6d
Unfortunately, my IT skills are not good enough to troubleshoot this error message.
Troubleshoot Techniques Taken So Far:
I tried to Google similar issues, and couldn't find any resolutions online.
I've ran Command Prompt as Administrator and ran the sfc /scannow command. The results: Windows Resource Protection did not find any integrity violation.
I've also edited my registry by going to HKEY_CURRENT_USER\Software|Microsoft\Office\15.0\Outlook\Profiles\ and deleting all profiles.
I've also ran Windows Updates via Control Panel and downloaded and installed all (including optional) updates.
My Computer:
Surface Pro 3
Operating System: Windows 8.1 Enterprise
Attach to Domain: Yes
Running Microsoft Office Professional Plus 2013 64-bit
Side notes:
The user who owns this device is currently using their older laptop that they were previously using before getting this Surface Pro 3 as a replacement. The laptop has no issues connecting to the pst data files stored on a shared network drive. It appears
that this issue is specific to this device possibly.
Can someone out there please help me out?

Hi,
Basically Network Stored PST files are not recommended by Microsoft.
.pst files are not intended as an enterprise network solution. Although it is possible to specify a network directory or a Universal Naming Convention (UNC) path as a storage location for a .pst file, network usage is not meant to be a long-term, continuous-use
method of storing messages in an enterprise environment.
We can learn more from these articles:
Network Stored PST files ... don't do it!
Limits to using personal folders (.pst) files over LAN and WAN links
Regards,
Melon Chen
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs. Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

3D surface spherical integral

Similar Messages

Maybe you are looking for