3FI_SL_C1_TT - Procedure of extracting data with delta

Dear experts,
I try to load FI-SL data with delta.
We use extractor 3FI_SL_C1_TT and have implemented the start routine from note 577644 to create 0balance within the transformation.
Delta is only available for actuals so we select data only for valuetype 10 as recommended.
I read that I have to do a full update of the closed periods.
To load the carryforward from 2014 I have to select 000.2015 and load it with a full load.
Till now every thing is clear.
But what are the next steps?
What do I have to select within the infopackage for the init load of the open periods (current year)?
After executing the init load: how do I have to define the delta load?
Thanks for your help.
Best regards
Mirjam

Hi Leszek,
we use cube for each year.
So when the periods of the previous year (2014) is not closed, too, I have to work with them
the same as with cube for current year and do at first an init for the whole year and after that a Delta for whole year.
For current year cube I try do init/Delta with 001.2015 - 016.9999. But what do I do with the carryforward -
I can´t do only once a full, case with every new data record for 2014 it will Change.
What is the best practise with carryforward in this case?
Regards,
Mirjam

Similar Messages

Data with delta extraction.

Hi Gurus
I want a small clarification regarding data with delta extraction.
If today the data is extracted from r/3 system with delta to ODS object and the data is activated and datamarted to another ODS and Cube.
Now if tomorrow the same records had changes how will the old data will be changed i.e in cube if we compress the old data what is the scnerio.
Can anyone explain in detail starting from Delta queue to change taking place at cube.
Regards
Raju

Raju,
Don't worry about compression of Cube... Even if you do delta after compression, nothing to worry about Data. Next time you compress it, it will Make 1 record.
Assume...
Initially... in ODS Document 45000001 Item 0001 qty 10 Amount 20
in Cube Document 45000001 Item 0001 qty 10 Amount 20 (After compression)
Qty changed to 5...
In ODS Document 45000001 Item 0001 qty 5 Amount 10. This record will create 2 delta records to Cube.
that is looks like this...
Document 45000001 Item 0001 qty -10 Amount -20 Record mode ' X' (Before Image)
in ODS Document 45000001 Item 0001 qty 5 Amount 10 Recordmode ' " (After Image)
Finally cube contains...
Document 45000001 Item 0001 qty 10 Amount 20
Document 45000001 Item 0001 qty 10 Amount -20
ODS Document 45000001 Item 0001 qty 5 Amount 10
If you compress cube... you will endup with last record.
all the best.
Nagesh Ganisetti.

Error when extracting data with extractor 2lis_04_matnr - NEED HELP ASAP !!

Hi experts!
Got an error when extracting data with extractor 2lis_04_matnr.
System says (short dump):
DUMP TEXT START----
Runtime error: CONNE_IMPORT_WRONG_COMP_TYPE
Exception: CX_SY_IMPORT_MISMATCH_ERROR
Error when attempting to import object "MC04P_0MAT_TAB".
The current ABAP program "SAPLMCEX" had to be terminated because one of the statements could not be executed. This is probably due to an error in the ABAP program. When attempting to import data, it was discovered that the data type of the stored data was not the same as that specified in the program.
An exception occurred. This exception is dealt with in more detail below. The exception, which is assigned to the class 'CX_SY_IMPORT_MISMATCH_ERROR', was neither caught nor passed along using a RAISING clause, in the procedure "MCEX_BW_LO_API" "(FUNCTION)".
Since the caller of the procedure could not have expected this exception
to occur, the running program was terminated.
The reason for the exception is: When importing the object "MC04P_0MAT_TAB", the component no. 5 in the dataset has a different type from the corresponding component of the target object in the program "SAPLMCEX". The data type is "D" in the dataset, but "C" in the program.
DUMP TEXT END----
Please, can someone explain me how to solve it?
Really need help ASAP!
Thanks in advance,
Jaume
Message was edited by:
 Jaume Saumell
Message was edited by:
 Jaume Saumell

Hi,
Check this note: 328181
So you need to delete entries in SM13/LBWQ for application and also detup table content.
And then refill teh set up table.
If you are in production clear the entries by running collective run no of times for this application 04.
With rgds,
Anil Kumar Sharma .P

Open Hub: How-to doc "How to Extract data with Open Hub to a Logical File"

Hi all,
We are using open hub to download transaction files from infocubes to application server, and would like to have filename which is dynamic based period and year, i.e. period and year of the transaction data to be downloaded.
I understand we could use logical file for this purpose. However we are not sure how to have the period and year to be dynamically derived in filename.
I have read in sdn a number of posted messages on a similar topic and many have suggested a 'How-to' paper titled "How to Extract data with Open Hub to a Logical Filename". However i could not seem to be able to get document from the link given.
Just wonder if anyone has the correct or latest link to the document, or would appreciate if you could share the document with all in sdn if you have a copy.
Many thanks and best regards,
Victoria

Hi,
After creating open hub press F1 in Application server file name text box from the help window there u Click on Maintain 'Client independent file names and file paths' then u will be taken to the Implementation guide screen > click on Cross client maintanance of file name > create a logical file path by clicking on new entiries > after creating logical file path now go to Logical file name definition there give your Logical file , name , physical file (ur file name followed by month or year what ever is applicable (press f1 for more info)) , data format (ASC) , application area (BW) and logical path (choose from F4 selection which u have created first), now goto Assignment of physical path to logical path > give syntax group >physical path is the path u gave at logical file name definition.
however we have created a logical path file name to identify the file by sys date but ur requirement seems to be of dynamic date of tranaction data...may u can achieve this by creating a variable. U can see the help from F1 that would be of much help to u. All the above steps i have explained will help u create a dynamic logical file.
hope this helps u to some extent.
Regards

Extract Data with OPEN HUB to a Logical Filename

Hi Experts,
Can anybody help me in sending the link for How to guide...Extract Data with OPEN HUB to a Logical Filename?
Thanks in advance.
BWUser

Hi,
check this links...
http://searchcrm.techtarget.com/generic/0,295582,sid21_gci1224995,00.html
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/e698aa90-0201-0010-7982-b498e02af76b
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/1570a990-0201-0010-1280-bcc9c10c99ee
hope this may help you ..
Regards,
shikha

Pl/sql to extract data with form: extract data is a text file

Hi dear all,
to be straightforward here is the problem: we currenlty developing with oracle tools :" Developer Suite 10g version 10.1.2.0.2" an interface .
Using oracle forms, we would like to program a command button that will be in charge of pooling the data from the database and offer the client to save it on his desktop. The extracted data should be a one single flat text file having a one single continuous row. and the data extracted are from a 10 g database( one table having one column(varchar2(240); and 192 rows );
attached with this mail is ou current script link with the command " when-button-pressed"
PROCEDURE EXTRACTION_FICHIER_FIC_BDF IS
n_bouton number;
LF$File CLIENT_TEXT_IO.FILE_TYPE;
LC$Name Varchar2(100) ;
LC$Fic Varchar2(100) ;
LN$Lines Pls_integer := 0 ;
LC$Line Varchar2(4000) ;
-- cursor --
Cursor C_CUR Is
SELECT ENREGISTREMENT_BDF
FROM ops$admO7.fic_bdf
ORDER BY 1;
BEGIN
LC$Name := 'd:\AA1217.bdf';
LC$Fic := WEBUTIL_FILE.FILE_SAVE_DIALOG
'd:\',
LC$Name,
'Choisir l''emplacement du fichier à sauvegarder'
If LC$Fic is null Then
Return ;
End if ;
-- Open the file --
Begin
LF$File := CLIENT_TEXT_IO.FOPEN( LC$Fic, 'W');
Exception
when others then
message( 'OPEN FILE ERROR ' || LC$Fic );
raise form_trigger_failure;
End ;
-- Write the lines --
For Cur In C_CUR Loop
LC$Line := Cur.ENREGISTREMENT_BDF;
CLIENT_TEXT_IO.PUT_LINE( LF$File, LC$Line ) ;
LN$Lines := C_CUR%ROWCOUNT ;
End loop ;
-- Close the file --
CLIENT_TEXT_IO.FCLOSE( LF$File ) ;
set_alert_property('AL_MESSAGE',alert_message_text,'Export terminé avec succès');
n_bouton :=show_alert('AL_MESSAGE');
synchronize ;
Exception
When form_trigger_failure Then
CLIENT_TEXT_IO.FCLOSE( LF$File ) ;
Raise ;
END;
thanks if advance !!!!!

Hello,
what's your problem with this? You posted a lot of useful information like version infos and code (Hint: when you post code you can do this with the tags so it gets formated), but I cannot see what exactly is failing or behaving unexpected, so you might share that too ;)
cheers

Extract data with reports scripts

Hi, I try to extract data from a database with the following code.It seems that some information desapeared... Does it come from thecommands in the reports?{DECIMAL 3SUPMISSINGROWSSUPBRACKETSUPCOMMASTABDELIMITNOINDENTGENROWREPEATSUPFEED} <COLUMN (CURRENCY)<CHILDREN CURRENCY <ROW (YEAR, SCENARIOS,ENTITIES,PROJECT, MEASURES) FY06TOTAL_ACTUAL<CHILDREN ENTITIES <DIMBOTTOM PROJECT <UDA (MEASURES, "PL")! If it does not come from the code, are there some cases wherethe reports "ignore" members (shared, dynamic...)?I can not find a logic behind the data loss...

Oh, sorry, let me rewrite. ---- Hi, I recommend that you put "<SPARSE" command above "<COLUMN (CURRENCY)". It will improve its performance greatly. Takashi.

Load data with Delta

Hello Expert,
I loaded data from SAP R/3 into PSA using Delta mode and found that a new record which was just created was not loaded into SAP BI. What could be possible?
Step of loading
1. Initial without data into PSA
2. Full load with criteria Fiscal Period (e.g. 001.2009 - 016.2009) into PSA
3. Load data from PSA into DSO with update mode = Delta
4. Create a new transaction from SAP R/3
5. Load data from SAP R/3 into SAP BI-PSA with update mode = Delta
Expected Result: A new record should be loaded into PSA.
Actual Result: There was no record loaded.
After initial loading without data, is it necessary to full load with all fiscal period. And then load with Delta mode?
I have never seen this kind of problem before.
Is anyone familiar with this kind of problem? How did you resolve it?
Any suggestion would be appreciated.
Thank you very much
W.J.

Hi,
Is your Datasource is Logistics? if so how the job has been scheduled in LO cockpit (hourly / daily)
Did you check the record in Delta Queue(RSA7) ??
After initial loading without data, is it necessary to full load with all fiscal period. And then load with Delta mode?
I have never seen this kind of problem before.
If you have specific selections you have to do it by repair full load .. and it doesn't impact delta loads

Is it possible to extract data with jdbc from msword???

I need to extract data from word.
Is it possible and can I do that (if you've got code it would be nice)
Thanx

I am not sure whether it is possible but if ever, it must be with a Microsoft COM object. i.e. you have to write a COM-Wrapper java class to access the content of a word file.
The best way i can consider is to use the OLD Visual J++, which was deprecated after .NET and C# were introduced.
It may still function, if your project is nothing commercial.

Extracting data with zero values for periods without data

Hello Together,
i extracted data from our hfm application from period 1 to 3.
Now i found that some rows begin with period 2 or 3 because there are no data in period 1 or 2.
So my question is, how i can get zero values for periods with no data.
Hope someone can help me.
Many thanks in advance.
Martin
P.S.: Our actual hfm version is 11.1.1.3
edit

For the periods with no data, HFM does not have a "0" to offer for the data extraction. Since the default data extract from HFM has each period on it's own row in the *.dat file, I don't understand your comment about rows starting with period 2 or 3. In the *.dat file the row for period 1 simply won't exist. Are you using a custom approach/tool for data extraction?
The only time HFM will offer a "0" where there is indeed no data, is if you extract derived data. You must include calculated data, and even then I believe HFM will only extract a "0" for the first period after a period where there was data, and only for flow accounts (Revenue/Expense). so if you have "100" in period 1, and no data in period 2, such that the derived value YTD for period 2 is "0", then you must include calculated values in the extract and you should see "0" for period 2. However, I don't believe HFM will extract "0" for period 3 - instead it will be blank/missing.
In general it could be very dangerous to force HFM to give zeros where there is no data.
--Chris

Delta extraction(date) with Function module problem

Hi All,
FUNCTION zrsax_biw_get_data_pr_d.
*"*"Local Interface:
*" IMPORTING
*" VALUE(I_REQUNR) TYPE SBIWA_S_INTERFACE-REQUNR
*" VALUE(I_ISOURCE) TYPE SBIWA_S_INTERFACE-ISOURCE OPTIONAL
*" VALUE(I_MAXSIZE) TYPE SBIWA_S_INTERFACE-MAXSIZE OPTIONAL
*" VALUE(I_INITFLAG) TYPE SBIWA_S_INTERFACE-INITFLAG OPTIONAL
*" VALUE(I_UPDMODE) TYPE SBIWA_S_INTERFACE-UPDMODE OPTIONAL
*" VALUE(I_DATAPAKID) TYPE SBIWA_S_INTERFACE-DATAPAKID OPTIONAL
*" VALUE(I_PRIVATE_MODE) OPTIONAL
*" VALUE(I_CALLMODE) LIKE ROARCHD200-CALLMODE OPTIONAL
*" VALUE(I_REMOTE_CALL) TYPE SBIWA_FLAG DEFAULT SBIWA_C_FLAG_OFF
*" TABLES
*" I_T_SELECT TYPE SBIWA_T_SELECT OPTIONAL
*" I_T_FIELDS TYPE SBIWA_T_FIELDS OPTIONAL
*" E_T_DATA STRUCTURE ZPR_ST OPTIONAL
*" EXCEPTIONS
*" NO_MORE_DATA
*" ERROR_PASSED_TO_MESS_HANDLER
* The input parameter I_DATAPAKID is not supported yet !
* Example: InfoSource containing TADIR objects
* TABLES: tadir.
*DATA: BEGIN OF zpr_st_copy,
* banfn TYPE zpr_st-banfn,
* bnfpo TYPE zpr_st-bnfpo,
* zebkn TYPE zpr_st-zebkn,
* knttp TYPE zpr_st-knttp,
* vbeln TYPE zpr_st-vbeln,
* ps_psp_pnr TYPE zpr_st-ps_psp_pnr,
* gsber TYPE zpr_st-gsber,
* werks TYPE zpr_st-werks,
* statu TYPE zpr_st-statu,
* ekgrp TYPE zpr_st-ekgrp,
* menge TYPE zpr_st-menge,
* frgdt TYPE zpr_st-frgdt,
* meins TYPE zpr_st-meins,
* loekz TYPE zpr_st-loekz,
* END OF zpr_st_copy.
* Auxiliary Selection criteria structure
DATA: l_s_select TYPE sbiwa_s_select.
* Maximum number of lines for DB table
STATICS: l_maxsize TYPE sbiwa_s_interface-maxsize.
* Select ranges
* RANGES: l_r_pgmid FOR tadir-pgmid,
* l_r_object FOR tadir-object,
 RANGES: PRNO for zpr_st-banfn,
 DATE1 FOR zpr_st-frgdt.
* Parameter I_PRIVATE_MODE:
* Some applications might want to use this function module for other
* purposes as well (e.g. data supply for OLTP reporting tools). If the
* processing logic has to be different in this case, use the optional
* parameter I_PRIVATE_MODE (not supplied by BIW !) to distinguish
* between BIW calls (I_PRIVATE_MODE = SPACE) and other calls
* (I_PRIVATE_MODE = X).
* If the message handling has to be different as well, define Your own
* messaging macro which interprets parameter I_PRIVATE_MODE. When
* called by BIW, it should use the LOG_WRITE macro, otherwise do what
* You want.
* Initialization mode (first call by SAPI) or data transfer mode
* (following calls) ?
IF i_initflag = sbiwa_c_flag_on.
* Initialization: check input parameters
* buffer input parameters
* prepare data selection
* The input parameter I_DATAPAKID is not supported yet !
* Invalid second initialization call -> error exit
 IF NOT g_flag_interface_initialized IS INITIAL.
 IF 1 = 2. MESSAGE e008(r3). ENDIF.
 log_write 'E' "message type
 'R3' "message class
 '008' "message number
 ' ' "message variable 1
 ' '. "message variable 2
 RAISE error_passed_to_mess_handler.
 ENDIF.
* Check InfoSource validity
 CASE i_isource.
 WHEN 'ZPR_ST_DS_D' OR ''.
 WHEN OTHERS.
 IF 1 = 2. MESSAGE e009(r3). ENDIF.
 log_write 'E' "message type
 'R3' "message class
 '009' "message number
 i_isource "message variable 1
 ' '. "message variable 2
 RAISE error_passed_to_mess_handler.
 ENDCASE.
* Check for supported update mode
 CASE i_updmode.
 WHEN 'F' OR ''.
 WHEN 'C'.
 WHEN 'R'.
 WHEN 'S'. " DELTA INITIALIZATION
 WHEN 'I'. "DELTA INITIALIZATION FOR NON CUMULATIVE
 WHEN 'D'. "DELTA
 WHEN OTHERS.
 IF 1 = 2. MESSAGE e011(r3). ENDIF.
 log_write 'E' "message type
 'R3' "message class
 '011' "message number
 i_updmode "message variable 1
 ' '. "message variable 2
 RAISE error_passed_to_mess_handler.
 ENDCASE.
BREAK-POINT.
* Check for obligatory selection criteria
* READ TABLE i_t_select INTO l_s_select WITH KEY fieldnm = 'ZPR_ST-FRGDT'.
* IF sy-subrc <> 0.
* IF 1 = 2. MESSAGE e010(r3). ENDIF.
* log_write 'E' "message type
* 'R3' "message class
* '010' "message number
* 'PGMID' "message variable 1
* ' '. "message variable 2
* RAISE error_passed_to_mess_handler.
* ENDIF.
 APPEND LINES OF i_t_select TO g_t_select.
* Fill parameter buffer for data extraction calls
 g_s_interface-requnr = i_requnr.
 g_s_interface-isource = i_isource.
 g_s_interface-maxsize = i_maxsize.
 g_s_interface-initflag = i_initflag.
 g_s_interface-updmode = i_updmode.
 g_s_interface-datapakid = i_datapakid.
 g_flag_interface_initialized = sbiwa_c_flag_on.
* Fill field list table for an optimized select statement
* (in case that there is no 1:1 relation between InfoSource fields
* and database table fields this may be far from beeing trivial)
 APPEND LINES OF i_t_fields TO g_t_segfields.
* Start tracing of extraction
* bice_trace_open g_r_tracer i_t_fields.
ELSE. "Initialization mode or data extraction ?
* Data transfer: First Call OPEN CURSOR + FETCH
* Following Calls FETCH only
* First data package -> OPEN CURSOR
 IF g_counter_datapakid = 0.
* Fill range tables for fixed InfoSources. In the case of generated
* InfoSources, the usage of a dynamical SELECT statement might be
* more reasonable. BIW will only pass down simple selection criteria
* of the type SIGN = 'I' and OPTION = 'EQ' or OPTION = 'BT'.
* LOOP AT g_t_select INTO l_s_select WHERE fieldnm = 'PGMID'.
* MOVE-CORRESPONDING l_s_select TO l_r_pgmid.
* APPEND l_r_pgmid.
* ENDLOOP.
* LOOP AT g_t_select INTO l_s_select WHERE fieldnm = 'OBJECT'.
* MOVE-CORRESPONDING l_s_select TO l_r_object.
* APPEND l_r_object.
* ENDLOOP.
LOOP AT g_t_select INTO l_s_select WHERE fieldnm = 'ZPR_ST-FRGDT'.
 MOVE-CORRESPONDING l_s_select to DATE1.
 DATE1-sign = 'I'.
 DATE1-option = 'GE'.
 clear DATE1-high.
 APPEND DATE1.
 ENDLOOP.
* Determine number of database records to be read per FETCH statement
* from input parameter I_MAXSIZE. If there is a one to one relation
* between InfoSource table lines and database entries, this is trivial.
* In other cases, it may be impossible and some estimated value has to
* be determined.
 l_maxsize = g_s_interface-maxsize.
 OPEN CURSOR WITH HOLD g_cursor FOR
* SELECT (g_t_fields) FROM tadir
* WHERE pgmid IN l_r_pgmid AND
* object IN l_r_object. "#EC CI_GENBUFF
*@ CODE FOR THE STRUCTURE TO FILL IN FROM EBAN AND EBKN@*
 SELECT a~banfn a~bnfpo k~zebkn a~knttp k~vbeln k~ps_psp_pnr k~gsber a~werks a~statu a~ekgrp a~menge a~menge a~frgdt a~meins
* INTO CORRESPONDING FIELDS OF TABLE IT1
 FROM eban AS a INNER JOIN ebkn AS k ON ( a~banfn = k~banfn AND a~bnfpo = k~bnfpo )
 WHERE a~banfn GE '2000000000' AND a~banfn LE '2999999999' and a~loekz eq ' ' and a~frgdt ge '20130401' and a~FRGKZ eq '2'.
*BREAK-POINT.
 ENDIF. "First data package ?
* Fetch records into interface table. There are two different options:
* - fixed interface table structure for fixed InfoSources have to be
* named E_T_'Name of assigned source structure in table ROIS'.
* - for generating applications like LIS and CO-PA, the generic table
* E_T_DATA has to be used.
* Only one of these interface types should be implemented in one API !
 FETCH NEXT CURSOR g_cursor
 APPENDING CORRESPONDING FIELDS
 OF TABLE e_t_DATA
 PACKAGE SIZE l_maxsize.
 IF sy-subrc <> 0.
 CLOSE CURSOR g_cursor.
* bice_trace_close g_r_tracer.
 RAISE no_more_data.
 ENDIF.
* bice_collect_table g_r_tracer e_t_data.
 g_counter_datapakid = g_counter_datapakid + 1.
ENDIF. "Initialization mode or data extraction ?
ENDFUNCTION.
in the above I_t_fields and I_T_select structures are not getting data .....
can any one pleasee let me know what mistake i hvae done with my code?
and i m unbale to change data source value to F1 if i am trying to change my function module and extract structure are disappearing....
i m not getting why it is happening .......
thank you
vijay

Hi yasemin,
 I m bit confused here with the line below
 IF i_initflag = sbiwa_c_flag_on.(if we pass 'X' then it will enter loop and checks for F or D and then assigns values to I_T_SELECT and I_T_Fields structure)
 accordfing to my code i feel it will work for any one not both(F or D).
one more doubt rsax_biw_get_data extraction method is F2 few of them are asking to change to F1.
so tried running a code then in RSO2 extact structure and FM both dissapeared i did not get why it happened ?
can you please let me know why it happend
thanks
vijay

Web Integration Developer: extracting data with regular exressions

The WIDL Dev User Guide is pretty thin when discussing pattern matching and how to create complex regular expressions for data extraction. It apparently asssumes that one already knows how to do this.
Does anyone have a reference for a more detailed discussion about RegEx, specifically property masking? I need to extract values from a URL to pass to input variables.
Any help is appreciated.
Thanks.
Michael Stelly

The bible on this is Mastering Regular Expressions -- http://www.amazon.com/exec/obidos/ASIN/1565922573/o/qid=984509858/sr=8-1/ref=aps_sr_b_1_1/102-0133525-7220143
HTH.
<BLOCKQUOTE>quote:<HR>Originally posted by Michael Stelly ([email protected]):
The WIDL Dev User Guide is pretty thin when discussing pattern matching and how to create complex regular expressions for data extraction. It apparently asssumes that one already knows how to do this.
Does anyone have a reference for a more detailed discussion about RegEx, specifically property masking? I need to extract values from a URL to pass to input variables.
Any help is appreciated.
Thanks.
Michael Stelly<HR></BLOCKQUOTE>
null

Extracting data with XPath

This question was posted in response to the following article: http://help.adobe.com/en_US/ColdFusion/10.0/Developing/WSc3ff6d0ea77859461172e0811cbec22c2 4-78cc.html

My understanding is:
CF8 and CF9 use Xerces for parsing and Xalan for Transformations
CF10 uses Saxon9-HE for Parsing. Not sure what for transformations.
Jason

How to extract data from ORCL GL in "full" and not "delta " with FDM ERPI?

Hi
I am using FDM ERPI 11.1.2.1 to extrct data from Oracle eBS 11.
I can see that FDM ERPI extracts data in "delta mode" using the GL_TRACK_BALANCES_DELTA (FDM adds a row in this table after the 1st load of the period").
Is it possible to force the "full mode" in order to reload all the data from Oracle GL for each FDM data load?
Because I don't know why, but I have each month rows which are not imported into FDM.
thanks in advance for your help
Fanny

Hi
I had see that I have to install the FDM 11.1.2.1.502 patch in order to see this option in my ERPI adapter options.
I have passed this patch.
So I have the ERPI-FIN-C1 adaptor.
I can see a new option (Time Out Value) but no "Load Data" or "Execution mode" option :-(
Any idea of where the problem come from?
Fanny

Error while extracting data using function module

Hello,
I created one generic datasource and i want to extract data with the option "Extraction by Function Module".
But when i specified function module name and was trying to save, it thrown a error message saying
'The specified table does not exist'.
What could be the reason?
Please help me out.
Thanks,
Regards,
Steve

Hi Steve,
Once you execute T.Code RSO2, you need to fill in the details and click Create, specify the Appl. Component and in Extraction by Function Module, give Function Module name and Extrct Structure in the given boxes.
"This structure is used by a DataSource that was created using the transaction RSO2 (generic extraction) and selects data using a function module.
The data must be transferred from this function module to an interface table E_T_DATA."
I'll try to comeup with small piece of code to sort your issue.
Hope it helps!!!!
Amit

3FI_SL_C1_TT - Procedure of extracting data with delta

Similar Messages

Maybe you are looking for