3g and wireless together, problems

I have the iphone 4 and when my wireless is connected at home. My AIM is slow and I usually have to wait a long time before the outgoing emails are sent. The go but can take several minutes
Can anyone help with this?

It switches to wifi if wifi is turned on. Everything will then go through wifi except calls and texts.

Similar Messages

Dreamweaver and wireless network problem

This isn't about Airport, but I couldn't find the proper place to post this, so I put it here. Please advise if I'm wrong.
I'm running Tiger (10.4.2) on a dual G5. My husband is running Windows XP on a 2GHz Dell, and also a Dell laptop. We just moved and HE is wireless now, not me. I am hardwired to a Netgear router (doesn't seem to have a name but the number on the bottom is CD814WG). We are using RoadRunner as our ISP, as we have done for seven or eight years, since its introduction into our city. TimeWarner did our installation, and everything is fine with my machine (although my husband's problems are another issue altogether!).
I should also say that we are in no way networked, and that is not our goal or plan. We have the Netgear router, and as I mentioned, I'm wired directly to it. We both use broadband individually, and have no need to share a connection.
I'm not having any problems at all with my broadband connection -- internet and Mail are fine -- but since the installation of the Netgear router I can't use Dreamweaver to upload HTML pages I create. I can use Fetch just fine, which doesn't surprise me since I've always powered right through my firewall with Fetch, while I always had to turn it off, with Dreamweaver. And of course I should say that my firewall is down when I have the uploading problem. The built-in OS X firewall is currently the only one I have installed, BTW.
When I try to upload, DW gives me a dialog box saying "Dreamweaver cannot determine the remote server time. The Select Newer and Sychronize commands will not be available." And of course I can't upload anything.
Any ideas? I have the information the TimeWarner guy left here so I can go onto the Netgear admin page, but I don't know what to change/add so that I'm able to upload with DW. It's my understanding that port 80 is for internet connections, but as I mentioned, it's not blocked -- I can go online just fine. It's just that I can no longer upload HTML pages with Dreamweaver.
Thanks in advance...

I'm getting the same error message as you (Dreamweaver cannot determine the remote server time...).
I found that I could no longer upload with Dreamweaver (or see all the remote files) but I could with Transmit. However (and here the similarity ends) when I turned off the OSX firewall everything was fine.
This didn't make me feel very easy, however, as I preferred having the firewall up. I found that it would work with the firewall up if I checked the "use passive FTP" box in Remote Info in the Site Definition menu.
The Netgear router also has an NAT Firewall but I am using a Netgear router too, both hardwired on my iMac (via Airport Extreme - don't ask!) and wirelessly on my laptop. I haven't configured the firewall on that at all (I wouldn't dare!) and I'm getting through OK now. Try the passive FTP thing; it might work!

Broadband/internet and wireless connection problem...

Towards the end of 2101 I received an email informing me that BT would be upgrading my local line and I could expect a much improved service. Whether this 'upgrade' has been the cause of my problems or is merely coincidental I cannot say. Prior to my experience since this time I could count lost broadband in hours per year (I never had internet or wireless connection problems).
Since the end of 2010 I now regularly lose my broadband completely every six to eight weeks. 'Home Hub cannot connect to broadband.' There is a worsening loss of speed? over a period of two to four days at the end of which I need to phone BT three/four/five, etc. times until they manage to locate the problem and fix it. It is always some problem they find on the line or with their equipment.
I always mention that this is an ongoing problem. Never do they take any action to escalate the issue.
This week things have become considerably worse.
I have started to lose my internet connection now. 'Safari cannot connect to the internet'.
There are now two issues which arise concurrently.
I phoned BT, finally the operative in India (through a very poor BT wireless phone connection) changed the channel of my router for me. He mentioned something about changing the address and password. This seriously exacerbated the situation. My password is not recognised now when I am asked to reconnect by selecting a network.
The next occasion on which I lost my INTERNET connection and tried to reconnect I got the message 'Airport has the self-assigned IP address (...........) and is unable to connect to the internet.
I phoned BT to report this and was told that this indicated an adapter problem and the problem was now out of BT's hands. I Should contact Apple.
I did so. Apple said I should contact BT to change channels. I explained this had caused the problem and they were now refusing to assist me. Apple tried everything that they could think of to resolve the issue (despite not being required to do so). Eventually the only suggestion they could make as BT had refused to help was to reinstall my operating system. Extremely drastic. But I can now connect wirelessly again.
Service is still intermittent requiring constant restarts to regain connections.
BT's response to a formal complaint was more of the usual banal questions, the usual tests, the usual promises of 'something would be done'.
Their systems are not set up to make any sort of accurate diagnosis of customers' issues. They seem to have a set number of 'fixes' into which they try to fit all problems - one would assume simply to save costs - their cost saving exercises are now costing me money.
That's all for starters.
Any suggestions?
Solved!
Go to Solution.

fredderf99 wrote:
I have a similar problem, since BT "upgraded my broardband" my home hub looses internet connection at least twice a day and I have to power reset it. the broadband shows as connected but the internet connection is lost, if I try reconnecting it fails and only a power resetr will work. I have a temp solution by fitting a time switch to the mains adaptor and reseting it at 0200 each day. but before the upgrade the home hub had worked for years and no problems. i have also replaced the origonal home hub 1 with a home hub 2 to see if that improves the situation.
welcome to the forum
This subject has been marked as solved by the originator and you will get more response if you start your own subject rather than continue here.
if you start your own subject just cut and paste your post and then in order to help please can you post the adsl stats from your router may need to 'show detail' to get all stats (if hub enter 192.168.1.254 in your browser and navigate to adsl or use a-z, if netgear enter 192.168.0.1) and run btspeedtester (MAC users may have problems) http://speedtester.bt.com and post the results .
are you connected directly to the NTE5 master or test socket or to somewhere else? Do you have any phone extension sockets in your home?
Have you tried the quiet line test? - dial 17070 option 2 - should hear nothing - best done with a corded phone. if cordless phone you may hear a 'dull hum' which is normal
Someone may then be able to offer help/assistance/suggestions to your problem
If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

USB and Wireless Together?

Just purchased Photosmart D110 printer. This is probably a very simple question, but can it run USB on one computer and wireless on another at the same time? One computer is a desktop with no wireless capability, the other is a laptop that runs almost exclusively wireless. Can both computers use the D110 without having to change the printer settings all the time?
This question was solved.
View Solution.

I am having the same problem with a new LaserJet 100 colorMFP M175nw. When I initially set it up with Setup wizard, I selected the "USB" option, since that was how my old printer was hooked up to the computer. That worked fine and the printer works perfectly with my desktop. Now I can't figure out how to also set up the printer to be used wirelessly. I specifically bought this printer because I wanted to be able to Airprint from an ipad. I've tried several of the fixes listed on this website, but I'm not able to get a list of wireless networks to appear on the printer menu. I am using a Linksys wireless G router, which is hardwired to my desktop, but which I use to wirelessly access the internet with my laptop and ipad.
What is the best way to be able to use the printer with my both my desktop (non-wireless), laptop, and ipad (both wireless)? Can I leave the printer hardwired to my desktop with a USB AND connect the other devices wirelessly? If so, what is the best way for me to connect the printer to my router - wirelessly or wired? What steps do I need to take to do that and get the printer connected?
Thanks for your help!

Exporting tiff and jpg together problems Lightroom 3.1 w/ Adobe Leopard

When both are exported w/ writing a CD: makes corrupt file some do not open and some no thumbnails...on Mac Powerbook and Macbook

Well known problem in Leopard. It trips up on some metadata that Lightroom writes to the files. This is a bug that Apple introduced late in the leopard development, but that they still have not fixed. You should only come across the bug if you write the originals, not if you export new versions of the file.

Itouch and Iphone together problems

I have purchased an Itouch for my daughter and I have an Iphone. I am having trouble setting up her account separate from mine and the two seem to be mixing with each other. I want her to be able to have separate access to my itunes account and have access to her email (which I cant get to work). I feel like I needto start her I touch setup all over....

when you open iutnes make sure you are logged into your account. in the near upper right corner in itunes you will either see a log in button or her /your email addy in the itunes store tab on the left column. if you are hooking up her touch, and it shows your email addy, click on it to change the login name and password. i have 2 iphones and 2 touches in my home and have no problems. if theres anything else we can help with let us know.

Wired and wireless network problem

I have an Airport Extreme setup with an 20" imac connected thru ethernet. I also have a 17" Macbook Pro connected wireless. Both have no problems connecting to the internet but I want to be able to talk to each other. I checked and the wired network has a different subnet then the wireless one. I would like to have them both on the same subnet but I can't seem to find a setting in my airport extreme that will allow me to change that.. The wired network seems to be the same subnet as the assigned address from my ISP. I only have 1 address from my ISP so the airport is not acting like a switch it is routing the data just creating a internal network based on the ip from the ISP. The wireless is handing out ip address that I have setup in the DHCP section.
Message was edited by: Chadwick-P

Hmmmm
It sounds like you have your AirPort Extreme configured to be in bridge mode? Is this the case?
If it is the case, then you can configure it to "share a single IP address" and then both the wired 20" iMac and the MBP would get DHCP addresses on the same subnet....
If your Airport Extreme is already setup to share a single IP address then the two stations really ought to have IP addresses from the same subnet. Perhaps one of more of them has a static IP and is not setup to use DHCP?

Aluminium Extended Keyboard and Wireless Keyboard Problems

Hi
I'm having problems with both keyboards. I have repaired permissions and repaired the disk.
I can't use the keyboard to invoke the Hardware test from the second installation DVD when restarting (holding done the D key), nor can I boot of the first installation DVD by holding down the C Key. Likewise, neither keyboards permit the pRAM to be zapped.
Holding down the Option key when restarting has no effect.
When typing, some keyboard characters and the function keys just won't work on the wireless keyboard. For example, on the extended keyboard I am using now, I can't type a capital t.
the only way to boot from the installation disk, is to select it as the start-up disk in System Preferences.
the login screen does not allow me to type in the password first time around. it just keeps adding bullets, e.g. •••••••••••••••••••••••••••••••
the only way to get around this is to press enter, let the login window shake itself, and try again.
I think this is a software / firmware / driver problem. Perhaps it is related to the 10.6.8 update? the keyboard problems have only started happening today.
My wife said she had to stop everything the other day, because the iMac demanded (out of the blue) that a restart was required. She could do nothing but restart the iMac.
Without a fully functioning keyboard, the computer is not much use!
Any ideas?

Your wife's remark indicates a KP. See
What is a kernel panic,
Technical Note TN2063: Understanding and Debugging Kernel Panics,
Mac OS X Kernel Panic FAQ,
Resolving Kernel Panics, and
Tutorial: Avoiding and eliminating Kernel panics for more details.
However, if you can't access anything with the keyboards, then your best bet is AppleCare's Express Lane.

Wired and wireless mouse problems...

Hey, looking for someone who can help me with a mouse connection problem I'm having with my G4 powerbook. Originally I was using a bluetooth wireless mouse and it would seemingly loose its connection. Example, I'm surfing Safari and I go to click a link with my mouse and then the cursor disappears up into the left corner. I have to move it around a bit before it gets its connection back. To test this I put the computer with hot corners to start expose. I would be surfing and BAM expose is activated.
Ok potentially crappy mouse. I plug in my USB mighty mouse and BAM, it does the same thing. I still have apple care on the laptop, but the nearest apple store is an hour away so I was hoping someone might be able to shed some light on this annoying problem.
Anyone...?

I have the same issue. Left and Right buttons are programed as "primary" and "secondary" respectively, but any action on the mouse activates the right button drop down menu. I changed out my wireless mouse to the wired mouse, rebooted and changed USB ports but not change. My keyboard is not typing either?
Looking forward to some GURU type insights here....?

N82 V30.0.013 Bluetooth and Wireless LAN problems

I am using an N82, but it looks like there are similar problems with everything using similar firmware. I didn't have any of these problems with the V20 firmware that came with the phone or after the first V20 upgrade I used.
I find that my wireless LAN connections sometimes only let me browse a few pages before I get the "web connection timed out" message. If I change wireless LAN connection (I have two, mostly for testing purposes) I can continue browsing. Of course the same error may happen causing me to switch again. Sometimes it just works. Both have WPA set up and the passwords are clearly correct. If I use Real Player I can typically listen for as long as I like. Sometimes the connection to the server will drop for Real Player but reconnecting will work (don't have to change wireless LAN network). With the web browser it seems like the data connection is dead, not a server timing out - the message appears instantly. I think have seen the same problem once with my 3G connection, but I haven't recreated it. Could be my imagination!
I have never had any problems with IMAP email using either the Nokia client or Profimail on either the wireless LAN connection or 3G. It leads me to believe that there is nothing wrong with the wireless LAN side of things and it may be more to do with the web browser, or perhaps just that the email clients are only talking to one server helps (DNS problems?). Has anyone experienced similar problems with an alternative browser?
I have also found that when I get to work my bluetooth dongle doesn't connect to my phone. If I disable/enable bluetooth on my phone it will connect. I had this problem with my N80 with the first firmware I had on it and the problem went away after an upgrade.
So, it seems that both connections are fixed by turning them off and on again.

Having both routers the same IP address is a little bit confusing, but possible since each router creates it's own subnet and provides full PNAT support. Actiontec DSL modem has to have DHCP enabled since Linksys WAN (not LAN) port should be connected to one of 4 Actiontec LAN ports. Linksys should not have any configuration setup in regards of your WAN account. Just set it to dynamic address. In ohter words:
1. RJ-11 connect to Actiontec mode/router.
2. Actiontec modem should be configured to acquire an IP address from Verizon and to provide all authentication info to Verizon.
3. Actiontec modem should be configured to allow clients to acquire dynamic IP addresses -- DHCP enabled.
4. Linsys WAN (not LAN!) port should be connected to Actiontec LAN port.
5. Linksys should be configured to acquire dynamic IP address and no authentifacations.
6. Configure Linksys to be DHCP enabled or you can use static IP addresss if you want.
7. Wireless devices would be connected to Linksys and on the way to the Internet addresses would go through double NAT conversions. Any wired device connected to Linksys would have similar features. Any device connected to Linksys should be able to connect 192.168.1.1 assigned to Linksys, but not to Actiontec.
8. To be able to connect Linksys and Actiontec would no be able to communicate unless you split 192.168.1.0/24 into smaller subnets and set specific routes in the table. But even you do so you will not be able to access 192.168.1.1 accross subnets boundary.
Hope it helps.

Lenovo g570 and wireless card problems

Ello folks,
I recently bought a Lenovo g570 Notebook, started using it all went fine recently i even upgraded my windows 7 to windows 8 x 64 and everything was swell. At some point my wireless connection was working fine but then BAM my wireless connection dissappeared from the list of connections. I must say that i had the same problem with the previous windows 7. Figured that the broadcast from the router was the problem but it turned out it wasn't sooo i'm assuming it's some kind of setting from the laptop because all other wireless using tech from home can see that particular network, all except the lenovo notebook.
Any help would be appreciated. I must say that i recently updated every driver to the latest after deinstalling the previous ones, without any result..... It's driving me nuts ....

hi mikydutza34,
Welcome to the Lenovo Forums.
If you upgraded to WIndows 8 Pro, check these article as it's similar to your problem.
Wireless unable to switch on in Windows 8
Wireless card enabled but not connected after Win 8 Pro was installed
Let me know your findings,
Cheers
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

DSL Modem and Wireless Router problems

I started to have problems on Tuesday.
My Equipment is:
Dell Precision 870 PC with a Intel Pro network card
Apple IMAC with the Apple Lan connection
Lynksys/Cisco E3000 (Problem started with a Linksys WRT610N router)
Verizon (Actiontec) GT701C DSL modem
I came down to my office and I noticed that the DSL light on my modem was not lit. In the past
this has ment that there is a problem in the Central Office. Later in the day I got hold of Verizon
tech support and we got the DSL running again with the modem connected to either computer.
When I connect the router to the modem and the computers to the router, Dell via wire and Apple
via wireless 5.0 GHz 802.11N inout and restart both the router and the modem, I get connectivity
through the router and the modem but the DSL light on the modem is not lit. After a long period
of time the DSL light may come on then I loose connectivity.
Everything was working correctly til late Monday night/early Tuesday morning.
I have reset both the modem and routers to factory defaults several time. I have a problem when
trying to get connectivity with the moden after setting it up again and it takes me to the Verizon
DSL startup site. Tech support walked me throuogh using the "192.168.1.1/verizon/redirect" and
shutting the redirect off. I then have connectivity as long as the router is not connected.
I thoought the router went so I just installed a new router, the Linksys/Cisco E3000, and I still
have the DSL light problem.
Solved!
Go to Solution.

Having both routers the same IP address is a little bit confusing, but possible since each router creates it's own subnet and provides full PNAT support. Actiontec DSL modem has to have DHCP enabled since Linksys WAN (not LAN) port should be connected to one of 4 Actiontec LAN ports. Linksys should not have any configuration setup in regards of your WAN account. Just set it to dynamic address. In ohter words:
1. RJ-11 connect to Actiontec mode/router.
2. Actiontec modem should be configured to acquire an IP address from Verizon and to provide all authentication info to Verizon.
3. Actiontec modem should be configured to allow clients to acquire dynamic IP addresses -- DHCP enabled.
4. Linsys WAN (not LAN!) port should be connected to Actiontec LAN port.
5. Linksys should be configured to acquire dynamic IP address and no authentifacations.
6. Configure Linksys to be DHCP enabled or you can use static IP addresss if you want.
7. Wireless devices would be connected to Linksys and on the way to the Internet addresses would go through double NAT conversions. Any wired device connected to Linksys would have similar features. Any device connected to Linksys should be able to connect 192.168.1.1 assigned to Linksys, but not to Actiontec.
8. To be able to connect Linksys and Actiontec would no be able to communicate unless you split 192.168.1.0/24 into smaller subnets and set specific routes in the table. But even you do so you will not be able to access 192.168.1.1 accross subnets boundary.
Hope it helps.

Software Installer and wireless internet problems after upgrade from Leopard to Lion.

Last weekend I upgraded the OS on my MacBook Pro from Leopard to Snow Leopard, and then from Snow Leopard to Lion. I'm having a couple of problems.
First, I cannot get the wireless internet to work. My internet connection is fine, I can plug the ethernet cord in and all is well. But I cannot get wireless signals to work. Have tried both my Airport Express and an old linksys router, and neither seem to work. They both worked just fine before the update. I had very fast wireless internet, and now nothing. With the Airport Express, when I plug it in iti'll just continuously blink orange, and the Airport Utility refuses to recognize it. The linksys router seems to work, because it puts off a signal and my iPhone connects to it. My computer recognizes the signal, but it won't open any internet pages, says I'm not connected.
Today I tried to install Apple's Migration Assistant software to help with my first problem. But a funny thing happened. The software installer says I don't have enough space. But I have plenty- I have almost 200 GB, and I only need 5 MB for the program. I've never seen this happen before, it's so odd. Any suggestions?
I really appreciate any assistance/suggestions!
Thanks,
Ellen

EDLIU wrote:
How do I purchase "Snow Leopard" from Mac App Store?
Please give me the link to "purchase and download the Snow Leopard" in Apple Online Store.]
You can't purchase Snow Leopard from the Mac App Store. Or "download" it. That will be possible for Lion.
For the Apple Online store, why can't you just look for yourself?
http://store.apple.com

MacBook, 10.4.8, and wireless network problems. How I solved it.

Hi
I've seen a few post about not connecting to a wireless network after the 10.4.8 upgrade.
Before the 10.4.8 update my MacBook worked fine on my wireless network; after the 10.4.8 update I could not connect to my network via AirPort, though it kept offering to connect to my neighbours networks. My wireless network is configured for WPA.
I managed to get this working by deleting my existing AirPort network configuration from System Preferences and creating a new configuration with the same network settings.
Hope this helps,
Matt
iMac G5 1.8GHz 1GB 20"; MacBook 1GB; Mac OS X (10.4.8)

In "Network" I deleted all prefered networks one by one, set it to automatic, turned airport off and back on, and add my network again as prefered network, set it back to connect to preferred network. see apples instructions:
http://docs.info.apple.com/article.html?artnum=304482
Now its fast and connects by it self again.

Router and Wireless Ps3 Problems. Please help.

well ok i had a previous router, wireless, and it work well with my ps3. Then i found out hey wait, my NAT type 3 is preventing me from playing with my friends. So i tried to fix it. Well something went wrong and my router just completely failed on me. So i went and bought a Linksys WRT160N. Bam it was amazing. My internet work on my ps3 and computer. But yet i still had a NAT type3. The only positive thing was i now had uPnP avaliable. So i went to try and fix my NAT type....then something went wrong again. Today i was opening the ports b/c someone said open your ports to change NAT 3 to NAT 2. Then all of a sudden i try my connection on my ps3 and it says Error 8013013E, cannot reach the access point. It wouldnt even get the Ip Adress. Everything is typed in right and the WPA security, but still cant connect to the access point. Plus if this helps, when i try to do the Wi-Fi Protective Setup, it says failed. I was thinking about just returning the router to its manufactured state but i dont know how. Any suggestions??

I think the ports on your router are not opened properly, that's the reason the NAT type on your PS3 is set to NAT3.
To make your PS3 work with your Router, follow the steps bellow.
Open an Internet Explorer browser page on your wired computer(desktop).In the address bar type - 192.168.1.1 and press Enter... Leave username blank & in password use admin in lower case...
On the set-up tab change the MTU Size to 1452 and click Save Settings...
Once you return to the set up page click on the Security tab and uncheck Block Anonymous Internet Requests and click on Save Settings...
Click on "Applications and Gaming" tab and then click on "Port Range Forwarding" subtab...
1) On the first line in Application box type in ABC, in the start box type in 80 and End box type in 80, leave the protocol as both and under ip address type in 192.168.1.20 and check the enable box...
2) On the second line in Application box type in DEF, in the start box type in 443 and End box type in 443, leave the protocol as both and under ip address type in 192.168.1.20 and check the enable box...
3) On the third line in Application box type in GHI, in the start box type in 5223 and End box type in 5223, leave the protocol as both and under ip address type in 192.168.1.20 and check the enable box...
4) On the fourth line in Application box type in JKL, in the start box type in 3478 and End box type in 3479, leave the protocol as both and under ip address type in 192.168.1.20 and check the enable box...
5) On the fifth line in Application box type in MNO, in the start box type in 3658 and End box type in 3658, leave the protocol as both and under ip address type in 192.168.1.20 and check the enable box...
6) On the sixth line in Application box type in PQR, in the start box type in 10070 and End box type in 10080, leave the protocol as both and under ip address type in 192.168.1.20 and check the enable box and click on Save Settings
7) Now assign the given ip address on your PlayStation ip address :- 192.168.1.20, subnet mask :- 255.255.255.0, default gateway :- 192.168.1.1...
8) Also assign the dns addresses on the PlayStation Primary dns :- 4.2.2.2...Secondary dns :- 192.168.1.1
9) Turn off your modem, router, and PlayStation...Wait for a minute...
10) Plug the modem power first, wait for another minute and plug the router power cable, wait another minute and turn on the PlayStation and test it...

3g and wireless together, problems

Similar Messages

Maybe you are looking for