3G service in my iPad 2 works temporarily only when it is upside down

3G service in my iPad 2 works temporarily when it is upside down?

Hello there, Aya Mohamed.
The following Knowledge Base article has some in-depth steps to troubleshoot your cellular service on the iPad:
iPhone: Troubleshooting a cellular data connection
http://support.apple.com/kb/TS3780
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro D.

Similar Messages

ZTE Open C Accelerometer only works when phone is upside down?

I just received my new ZTE Open C and when I tried a few games, like Sketchbook Squad, for example, I found that the accelerometer control ONLY works if I hold my phone upside down.
Does anyone know if this may be an OS related issue relating to calibration, or maybe it's a defective device?

Hi bugninja,
I also tried SketchBook Squad and it's working correctly on my device.
Can you please list *all* the apps that you are having problems with? Please specify which of those apps the accelerometer do not seem to work at all, and which of those apps the accelerometer only works when the phone is upside down. This information will help greatly in investigating this issue.
Please also let us know the Build ID of your ZTE Open C device. To find the Build ID, go into '''Settings''' > '''Device Information''' > '''More Information'''.
Thanks,
- Ralph

My iPad works perfectly except when trying to update apps. Then I get a message that says "Cannot connect to the iTunes store."

My iPad works perfectly except when trying to update apps. Then I get a message that says "Cannot connect to the iTunes store."

Try logging out of your account on the iPad by tapping on your id in Settings > Store and then log back in and see if it then works.
If that doesn't solve it then what has worked for some people is going into Settings > General > Date & Time and change the date to a few months in the future and then re-trying

My up and down arrows as well as page up and page down no longer work properly only when using firefox. Page up and down function more like the "home" and "end" keys as do the arrow keys.

Honestly I'm not sure if these began just after I updated FF to the current release, but it's been happening for at least 2 weeks. The arrow keys and page up and page down keys all work as if I'm pressing the 'home' and 'end' keys on my keyboard. This is only when using FF. Please contact me if you need more clarification. Thanks in advance!

Sounds that you have switched on caret browsing.
* http://kb.mozillazine.org/accessibility.browsewithcaret
You can press press F7 (on Mac: fn + F7) to toggle caret browsing on/off.
* Tools > Options > Advanced : General: Accessibility: [ ] "Always use the cursor keys to navigate within pages"
* http://kb.mozillazine.org/Scrolling_with_arrow_keys_no_longer_works
* http://kb.mozillazine.org/Accessibility_features_of_Firefox

InDesign CS5 - Printing, only first page is upside down.

Strange problem.
I have a multipage document that has threaded text on pages 2-10 (for example). When I print (duplex or not), the first page (cover page of the manual I writing) is upside down!
It shows correctly in indesign, as well as when I export it to a PDF and print it.
The printer i'm using is a Ricoh Aficio MP C4000 PS.
Our IT group at work says it's an indesign issue! I have had it successfully print on other printers, and I've tried everything I can think of on this printer.
HELP!

In my experience, when an IT department can't figure things out, it's always the application's fault (or "those stinkin' Macs").
I'm pretty sure its a Ricoh thing. I do duplex booklet printing from Acrobat 9 (from a PDF file exported from InDesign CS5) to a Ricoh 5560. I often get the same problem. I find toggling the "Auto Rotate Pages" button in the print dialog on and off will fix it for me. There's no sense to it. If it first prints upside down, click the button and print again and it will work. But the next time you go to print with that setting, it will be upside down again. Click the button off, and it will work. I've given up trying to troubleshoot it.

Track ball has decide to stop working or only when it feels like it

hi please help
the track ball on my 9300 has stopped working i have taken battery out and rebooted but still no good any ideas please x
Solved!
Go to Solution.

Hello !
Your problem seems to be more like a Hardware problem rather then a software problem.
So would request to visit your neares Authorised BlackBerry Service Centre, for handling of the issue.
Hope this resolves your Problem!
If your problem has been resolved then would request you to Click on "Like" and accept as solution so that other Advisors doesnt invest there time on this Message anymore.
Thanks.

When i try to watch a video eg bbc iplayer, it says this content doesnt appear to be working please try again later, but if i use ie or google chrome they work fine, only when i use firefox this happens

i can watch you tube fine, but if i try to watch anything else it doesnt work, bbc iplayer, itv player, videos on sky sports

I have exactly the same problem, i rolled back to 3.6.8, bbc iplayer plays fine. Now i have the 3.6.10 update pop up re-appearing, thank you but no thanks.

Location Services in Reminders - Not Working

I'm having issues with my Location Services for my iPhone 6 with iOS 8.1.3. Whenever I try and tell Siri a command such as, "Remind me to grab my checkbook when I get home." Siri always responds, "Before I can do that, you'll need to enable Reminders on your iPhone's Location Services."
The problem is that I've enabled the Location Services on Reminders over and over and over again, and yet, anytime I try and get Siri to set up a reminder, it always disables the Location Services behind the scenes and gives the same response, "Before I can do that...".
I can manually input a request with Location Services for Reminders. It's only when I try and use Siri to set up a reminder, that I have any issues.
Anyone else

Responding to an old thread here, but this is because of the way applications that use location services also use the data from Skyhook...
Skyhook is a service that records the MAC addresses of Cell Base stations/towers and wireless access points.
Google Maps vehicles records the wireless AP data at the same time they get street view images.
There was some controversy over this - but they effectively record the location and the MAC address of any AP they find as they drive round. This gets sent to a massive database at Skyhook and is used to either locate without GPS or enhance/aid the GPS information. It's also why the location is always the road outside!
If your location/MAC relationship has not been mapped by Skyhook, Google or others - then the good news is that you can add it - although it can take a month or two at least - to work. The reason is that it depends which database is being used by Skyhook's clients..
Add your Wireless Access Point (or Wireless Router) here: http://www.skyhookwireless.com/howitworks/submit_ap.php
The main website for Skyhook is here: http://www.skyhookwireless.com
Hope that helps...!

SUBMIT button works only when clicked twice... Online interactive form

Hi,
I have created a interactive form with SubmitToSAP button. In this I will enter a contract number and will click SUBMIT button.
For the first time it is fetching the contract details properly.
In the same form, i am changing the previously entered value with another contract number and clicking SUBMIT.
Now the details for the previously entered contract number is only displayed. Again if i try for the same value ( which i used for the second time ) and press submit, it is workin correctly.
So, the problem is, except for the very first time SUBMIT button action, the button works fine only when clicked twice..
please help me in solving this issue..
Regards,
Surya.

Hi,
In addition to my previous post, I am also using RESET FORM button from Library.
First I am entering the contract number (say 400000000) in the form and clicking submit button. The contract details are fetched and displayed in the form.
Now i am Resetting the form using Reset Button, and giving new contract number (say 400000020). When I pressed Submit button , the details of the first entered contract number (400000000) is coming.
Then again I am giving 400000020 or any other number, it is fetching the details correctly for that number...
Can anyone help me in this issue..
Thanks,
Surya.

CIF user exit works for Integration Model only when we De-Activate

Hi Friends,
I have enhanced the CIF User Exit [EXIT_SAPLMEAP_001] and populated the code in Include ZXCIFU14 for calculating the value of Open Order Quantities[OOQ] with respect to Material, Plant and Contracts, PO's then It transfer the OOQ from R/3 to APO.
Here it is Triggering the User Exit and working fine only when we De-Actrivate and Activate the Integration Model thru CFM3.
But In case of PO changes it is automatically calling the User Exit and Trasfer the OOQ from R/3 to APO.
When we change the Master Data it is not triggering the User Exit Automatically.
Could you someone suggest why we required to De-Activate the User Exit when we run the Integration Model every time.
Please suggest if we need to follow any pre required steps and why this behaviour for User Exit [EXIT_SAPLMEAP_001].
Waiting for your answer......Thanks in advance.......
Regards,
M N Kumar

Hello,
Could you please provide details about the master data you mentioned in your query. This exit is called for PO, PR ,confirmation, shipping notificatoin objects.
Rgs- Vikas

Lenovo spkrs work only when external spkrs plugged in

Arch runs great on noobies Lenovo 3000 n100.
Streaming audio and system sounds work fine only when external spkrs are plugged into headphone socket.
Onboard spkrs can be heard along with external spkrs together. I have tried every combination of Gnome-volume-control sliders and mutes to hear onboard spkrs by themselves but no luck. It's not a big deal as the laptop is always on my desk but I'm just curious if it can be fixed as I am not experienced enough yet.
Thanks
Regards

See this recent thread. It may be instructive.
http://discussions.apple.com/thread.jspa?messageID=10899641&#10899641

Health Service Heartbeat Failure Alert for Generated when one Management Server Down,

Hi,
I have Two Management Server, every one manage about 100 server, when one Management Server goes down unexpected, I receive 100 Alert for 100 Server Health Service Heartbeat Failure.
My Question, why when the Management Server down, it send that all Managed agent Health Service Heartbeat Failure?
Is there a way to change this?

SCOM 2012 agent will autofailover when primary server is down. You can check the failover management server by using the following powershell cmdlet:
#Verify Failover for Agents reporting to MS1
$Agents = Get-SCOMAgent | where {$_.PrimaryManagementServerName -eq 'MS1.DOMAIN.COM'}
$Agents | sort | foreach {
Write-Host "";
"Agent :: " + $_.Name;
"--Primary MS :: " + ($_.GetPrimaryManagementServer()).ComputerName;
$failoverServers = $_.getFailoverManagementServers();
foreach ($managementServer in $failoverServers) {
"--Failover MS :: " + ($managementServer.ComputerName);
Write-Host "";
http://www.systemcentercentral.com/how-does-the-failover-process-work-in-opsmgr-2012-scom-sysctr/

Hub Resetting only when Laptop connected

Hi,
I would be grateful for any pointers or advice on how to solve or track down the following problem.
I have a BT Business Hub which is connected by cable to a desktop PC and by wireless to two laptops.
( The laptops are only very occasionally used at the same time as the desktop, which is my main machine
and is used virtually all day)
Up until recently all three computers could be connected to the Internet without any issues, but
recently when one of the laptops is in use ( and it's always the same laptop ), my business Hub
resets itself and the connection is lost before being re-establised.
Odd as it sounds, this only happens occasionally, but as far as I can work out, only when the
troublesome laptop ( which is otherwise operating fine) is in use and connected to the Internet.
I could be going off on the wrong track, but would the laptop in question be capable of sending data
to the hub which would cause the hub to reset? And if so, what can I do to detect the problem?
Apologies for the vagueness of this query, as I am slightly confused as to what might be going on.
Thanks
DL

See if anything here helps, especially the speed or encryption settings.
Wireless Help
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

Working with alias when sending replies...

I've searched for the answer to this, but can't find one...
I enjoy the alias feature and use it for my business name. Works fine, only--when I hit reply to business emails, I sometimes forget to choose the alias as the "From" person in the drop-down menu. Therefore, a business email gets sent with my "fun" main address attached, instead. Argh!
Is there a way I can make the Mail program automatically choose my alias as the "From" address when I'm replying to emails *sent through that address*?
Is my best solution to simply purchase another .Mac (or .Me, whatever) account and set it up with the business name/email, so I won't forget anymore?
Would upgrading to the "family" package and using one of those accounts work?

Is there a way I can make the Mail program automatically choose my alias as the "From" address when I'm replying to emails *sent through that address?
Yes. In Mail, go to Preferences > Accounts and drag that particular account on the left side of that window to the top of the list, so it's the first one. That way whenever you compose a new message, it will be the first account shown in the dropdown menu.
s my best solution to simply purchase another .Mac (or .Me, whatever) account and set it up with the business name/email, so I won't forget anymore
No. Why pay $100 for something you don't need? If you're going to spend more moeny, you'd be better off getting your own domain name and linking it to Google Apps for Your Domain, which you could still send and receive through Mail, for no charge.
Mulder

Make a Flash animation play only when it scrolls into view

I am designing a very long page. There will be a flash animation at the bottom of the page. I want this animation to play only when the user scrolls down and this flash object comes into view. How do I do this? I am quite familiar with flash and actionscript, so I just need some pointers.
I have seen that this is already being used for advertisements. If you visit www.amazon.com, there are ads that appear far below on the page. These ads play only when you scroll down and the ad appears within the browser window. This happens on many other sites as well.
Many popular sites also use something like this. On CNN, try opening a new tab that loads a flash video. The video begins to play only when you actually go to that tab. Until you open the tab and the contents become visible in your browser window, the video doesn't start. How is this done?
Thanks in advance,
Kumar

Hmmm ... It looks like Amazon doesn't always run ads. I will give another example.
Take a look at http://digg.com/
There is a 300x250 ad at the top of the right-column. Ignore that.
In addition, there is a second 300x250 ad halfway down the page in the right column.
This second 300x250 ad appears when you scroll down.
The interesting thing is that the ad plays from the beginning when you first see it after scrolling down!
Most flash ads run for 15 seconds. After that the animation stops. When you see this second 300x250 ad, you will find it at the beginning of its 15 second animation. It plays from the beginning even if you wait for some time before scrolling down. This means that the ad is waiting for you to scroll down before it begins to play.
How is this done?
Thanks.

3G service in my iPad 2 works temporarily only when it is upside down

Similar Messages

Maybe you are looking for