401: Unauthorized when creating report data source in sharepoint 2010

Hi All,
I am getting 401: Unauthorized error when trying to create a report datasource in sharepoint 2010. Same login is able create to datasource in one system,, but only with one system it causing this issue.
Is it system or browser issue ? Please let me know.
Soumya Das

Hello Soumya Das,
Sounds like a system issue, can you check your ULS logs if you see some more information on the HTTP 401 Unauthorized?
Btw, have you also checked the Reporting Services configuration. Maybe this article can help:
http://technet.microsoft.com/en-us/library/bb326356(v=sql.105).aspx
- Dennis | Netherlands | Blog |
Twitter

Similar Messages

  • How create animated power view reports using sharepoint list as a data source in sharepoint 2010?

    Hi All,
    I got a client requirement to create reports using SharePoint List as data source. The report should show reflection depends on values changed (I mean animation).
    I have heard about the power view/power pivot which does this kind of animations in reports.
    Can someone please guide me on creating reports which shows animations
    In power view/power pivot using SharePoint List as data source in SharePoint 2010.
    Thanks in advance.
    MercuryMan

    Hi MercuryMan,
    Yes, Power View, a feature of SQL Server 2012 Reporting Services Add-in for Microsoft SharePoint Server 2010 or SharePoint 2013 Enterprise Edition, is an interactive data exploration, visualization, and presentation experience.
    It provides multiple views featuring tiles, slicers, a chart filter, and a number of visualizations, including cards, small multiples, and a bubble chart. So, we can use Power View to do intuitive ad-hoc reporting for business users such as data analysts, business
    decision makers, and information workers.
    Currently, Power View report only supports two types of data models: PowerPivot Worksheet, and data models based on Analysis Services Tabular Model or Multidimensional Cube.
    In your scenario, you can create PowerPivot worksheets using SharePoint List as data source, deploy the PowerPivot worksheet to a SharePoint Library or PowerPivot Gallery, and then generate Power View reports based on the PowerPivot worksheets on the SharePoint
    site.
    To use SharePoint List as data source in Excel PowerPivot, you can refer to the following resource:
    http://blogs.technet.com/b/excel_services__powerpivot_for_sharepoint_support_blog/archive/2013/07/11/excel-services-using-a-sharepoint-list-as-a-data-source.aspx 
    http://technet.microsoft.com/en-us/library/hh230322.aspx 
    To create a Power View report based on PowerPivot model, you can refer to the following links:
    http://technet.microsoft.com/en-us/library/hh231522.aspx 
    http://technet.microsoft.com/en-us/library/hh759325.aspx 
    Regards,
    Mike Yin
    If you have any feedback on our support, please click
    here
    Mike Yin
    TechNet Community Support

  • Getting 401 error while creating a Report Data Source with MOSS 2010 Foundation

    I have setup SQL Server 2008 R2 Reporting Services with SharePoint 2010 Foundation in SharePoint integrated mode. SharePoint Foundation is in machine 1 whereas SQL Server 2008 R2 and SSRS Report Server are in machine 2. While configuring Reporting
    Services - Sharepoint integration, I have used Authentication Mode as "Windows Authentication" (I need to use Kerberos).
    My objective is to setup a Data Connection Library, a Report Model Library, and a Reports Library so that I can upload a Report Data Source, some SMDLs, and a few Reports onto their respective libraries.
    While creating the top level site, "Business Intelligence Center" was not available for template selection since SharePoint Foundation is being used. I therefore selected "Blank Site" as the template.
    While creating a SharePoint Site under the top level site, for template selection I again had to select "Blank Site".
    I then proceeded to create a library for the data connection. Towards this, I created a new document library and selected "Basic page" as the document template. I then went to Library Settings for this newly created library and clicked on
    Advanced Settings. In the Advanced Settings page, for "Allow management of content types?" I selected "Yes". Then I clicked on "Add from existing content types" and selected "Report Data Source". I deleted the existing
    "Document" content type for this library.
    Now I wanted to created a Data Connection in the above Data Connection library. For this when I clicked on "New Document" under "Documents" of "Library Tools" and selected "Report Data Source", I got the error "The
    request failed with HTTP status
    401: Unauthorized.".
    Can anybody tell me why I am getting this error?
    Note: I have created the site and the library using SharePoint Admin account.

    Hi,
    Thank you for your detailed description. According to the description, I noticed that the report server was not part of the
    SharePoint farm. Add the report server to the
    SharePoint farm and see how it works.
    To join a report server to a SharePoint farm, the report server must be installed on a computer that has an instance of a SharePoint product or technology. You can install the report server before or after installing the SharePoint product
    or technology instance.
    More information, see
    http://msdn.microsoft.com/en-us/library/bb283190.aspx
    Thanks.
    Tracy Cai
    TechNet Community Support

  • Error while creating a new report data source in Sharepoint Document library

    I installed SSRS(sql server 2012 SP1) in my sharepoint 2013 farm(single server installation).
    I have installed SSRS addin for report also. 
    I created a document library and included the report data source content type, report builder report and report builder model content types. On click of any of these content types i get the below error. 
    "new Document requires a Microsoft SharePoint Foundation-compatible application and web browser. To add document to document library, click on the 'Upload' button."
    I am using windows 7 64-bit operation system with Google chrome and IE 8 64 bit.
    Any help would be appreciated. 

    Rakesh, is this an SSRS question?
    This doesn't look like Power View.
    Thanks!
    Ed Price, Azure & Power BI Customer Program Manager (Blog,
    Small Basic,
    Wiki Ninjas,
    Wiki)
    Answer an interesting question?
    Create a wiki article about it!

  • Error with JNDI when creating new data source

    Hi :
    This weekend, while adding new applications to the production environment we ran into a problem where the JNDI tree of the new managed servers was unreachable.
    The error message we saw was:
    <1364066840022> <BEA-149231> <Unable to set the activation state to true for the application 'EOI'.
    weblogic.application.ModuleException:
    at weblogic.jdbc.module.JDBCModule.activate(JDBCModule.java:349)
    at weblogic.application.internal.flow.ModuleListenerInvoker.activate(ModuleListenerInvoker.java:107)
    at weblogic.application.internal.flow.DeploymentCallbackFlow$2.next(DeploymentCallbackFlow.java:411)
    at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:37)
    at weblogic.application.internal.flow.DeploymentCallbackFlow.activate(DeploymentCallbackFlow.java:74)
    at weblogic.application.internal.flow.DeploymentCallbackFlow.activate(DeploymentCallbackFlow.java:66)
    at weblogic.application.internal.BaseDeployment$2.next(BaseDeployment.java:635)
    at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:37)
    at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:212)
    at weblogic.application.internal.SingleModuleDeployment.activate(SingleModuleDeployment.java:16)
    at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:162)
    at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:79)
    at weblogic.deploy.internal.targetserver.BasicDeployment.activate(BasicDeployment.java:184)
    at weblogic.deploy.internal.targetserver.BasicDeployment.activateFromServerLifecycle(BasicDeployment.java:361)
    at weblogic.management.deploy.internal.DeploymentAdapter$1.doPrepare(DeploymentAdapter.java:42)
    at weblogic.management.deploy.internal.DeploymentAdapter.prepare(DeploymentAdapter.java:187)
    at weblogic.management.deploy.internal.AppTransition$1.transitionApp(AppTransition.java:21)
    at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:233)
    at weblogic.management.deploy.internal.ConfiguredDeployments.prepare(ConfiguredDeployments.java:165)
    at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:122)
    at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:173)
    at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:89)
    at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
    at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
    at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
    weblogic.common.ResourceException: is already bound
    at weblogic.jdbc.common.internal.RmiDataSource.start(RmiDataSource.java:387)
    at weblogic.jdbc.common.internal.DataSourceManager.createAndStartDataSource(DataSourceManager.java:136)
    at weblogic.jdbc.common.internal.DataSourceManager.createAndStartDataSource(DataSourceManager.java:97)
    at weblogic.jdbc.module.JDBCModule.activate(JDBCModule.java:346)
    at weblogic.application.internal.flow.ModuleListenerInvoker.activate(ModuleListenerInvoker.java:107)
    at weblogic.application.internal.flow.DeploymentCallbackFlow$2.next(DeploymentCallbackFlow.java:411)
    at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:37)
    at weblogic.application.internal.flow.DeploymentCallbackFlow.activate(DeploymentCallbackFlow.java:74)
    at weblogic.application.internal.flow.DeploymentCallbackFlow.activate(DeploymentCallbackFlow.java:66)
    at weblogic.application.internal.BaseDeployment$2.next(BaseDeployment.java:635)
    at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:37)
    at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:212)
    at weblogic.application.internal.SingleModuleDeployment.activate(SingleModuleDeployment.java:16)
    at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:162)
    at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:79)
    at weblogic.deploy.internal.targetserver.BasicDeployment.activate(BasicDeployment.java:184)
    at weblogic.deploy.internal.targetserver.BasicDeployment.activateFromServerLifecycle(BasicDeployment.java:361)
    at weblogic.management.deploy.internal.DeploymentAdapter$1.doPrepare(DeploymentAdapter.java:42)
    at weblogic.management.deploy.internal.DeploymentAdapter.prepare(DeploymentAdapter.java:187)
    at weblogic.management.deploy.internal.AppTransition$1.transitionApp(AppTransition.java:21)
    at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:233)
    at weblogic.management.deploy.internal.ConfiguredDeployments.prepare(ConfiguredDeployments.java:165)
    at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:122)
    at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:173)
    at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:89)
    at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
    at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
    at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
    We traced the issue to a new data source that was added were we found that along with the the expected jndi name entry in the jdbc xml file, there were two blank entries:
    <jndi-name>weblogic.jdbc.DataSource.EOI</jndi-name>
    <jndi-name></jndi-name>
    <jndi-name></jndi-name>
    The data source was deleted, consoles restarted, the data source recreated and the issue occured again. To get by the issue we had to manually remove the blank tags from the xml file.
    We created 2 new data sources, and it only happened on the one. The same data source each time. Additionally, this issue did not occur when these changes were made in our lower (development, qa) regions.
    The version is the same in all three regions.
    WebLogic Version:     
    WebLogic Server Temporary Patch for 9324911 Wed Feb 03 22:38:01 PST 2010
    WebLogic Server 10.3 Fri Jul 25 16:30:05 EDT 2008 1137967
    Is this a known issue? And if so, is there a way to avoid it, other than to start constantly checking the newly created XML files?
    Thank you
    ted

    Yes, this is a common issue and documented in Oracle Docs:
    WebLogic Server: Getting "weblogic.common.ResourceException: is already bound" exception with JDBC JNDI name (Doc ID 1154250.1)
    The only fix is that you need to remove the empty value entries.
    Cheers!!
    AJ

  • When creating COPA data source, the Period/year become mandatory selection

    hi friends,
    I create a standard COPA datasource for account based COPA. however, when I use RSA3 to test load the data, I found that the financial period(PERIO) become a mandartory selection. this will cause that the initiall and delta load can only in a period.
    so do anybody konw how to elimate this mandatory selection condition? where to configure it?
    or I have to convice customer do the initial and delta load every year?
    please advice, very very thanks!

    hi Pravender,
    thanks very much for your solution. I did check the table TKEBWF, and system does set PERIO as MANDATORY there, however, there are below two inconsistent for this note:546238.
    1. my system PI package level is PI_BASIS 2005_1_700, which is higher than affected releases.
    2. there is another account based COPA datasource which has already generated for another operating concern, which does not set 'Period' as mandatory.
    so I suspect why other data souce do not do this change and still can make period as non-mandatory. is there any other place to configure?
    thanks again!
    Edited by: Henry Jiang on Mar 30, 2010 10:03 AM

  • 401 - unauthorized error while connecting to web service -Sharepoint 2010

    hi,
    i am calling webservice which is installed in sharepoint from custom pages.
    my server is not load balanced
    but i got error like 401 unauthourized.
    I set dword value to 1 for loopback issue
    still i got the same error
    i also used default credentials true;
    requestHTML = myClient.DownloadData(fileUrl);
    this line take too much time results in 401 error.
    Thanks Manohara R

    Hi Manohara,
    To download the file from SharePoint, I recommend to use the credential for a user who can access the file in SharePoint in the client object model.
    NetworkCredential credentials = new NetworkCredential(“username”, “pwd”, “domain”);
    ClientContext context = new ClientContext(“http://thesitecollection”);
    context.Credentials = credentials;
    Best regards.
    Thanks
    Victoria Xia
    TechNet Community Support

  • Unable to generate Power View report out of Multidimensional report data source

    Hi,
    I have created 'Report Data Source' connection to point to Multidimensional cube on Share Point site. But when I try to create a new Power View report out of it, I get following error message : 
    "An error occured while loading the model for the item or data source 'http://*********/PowerPivot Gallery/TestCube.rsds'. Verify that the connection information is correct and that you have permission to access the data source."
    I can see following message in the <moreInformation> section :
    <Source>Microsoft SQL Server 2012 Analysis Services</Source><Message>Errors in the metadata manager. The current model can only be expressed when the client is requesting tabular view metadata with VERSION restriction of 2.0 or later.</Message>
    Following are the System configurations :
    1) SSAS : SQL Server 2012 + SP2 (version 11.0.5058)
    2) Share Point 2013
    As mentioned in one of the MSDN documents this configuration supports creation of Power View reports on multidimensional cube.
    Can any one suggest what might be the issue?
    Thanks in advance!

    Hi Dipti,
    According to your description, you get the connection failure when creating a power view report, and it throws information "Errors in the metadata manager. The current model can only be expressed when the client is requesting tabular view metadata with
    VERSION restriction of 2.0 or later." Right?
    Based on the error message, the issue should be the SSRS on sharepoint metadata version mismatch when sending to SSAS. There's someone mentioned in a similar thread that this issue can be solved by installing the full package of CU4 for SP1.
    https://social.msdn.microsoft.com/Forums/sqlserver/en-US/133558cd-ffc8-4608-ae45-fdff01770c6d/powerview-sql-2012-sp1-cu4-cannot-connect-to-dimensional-metadata-version-11?forum=sqlreportingservices
    Even you already have SP2 installed, it supposed included CU1~CU9 for SP1. However, it has reported that SP2 doesn't fix all bugs which supposed to be fixed in CU for SP1.
    SQL Server 2012 Service Pack 2 is available - but there's a catch!
    So please re-install the full CU4 for SP1, restart the services and try again.
    Best Regards,
    Simon Hou
    TechNet Community Support

  • PowerPivot report data refresh error Data source as SharePoint list Data Feed

    Hi All,
    I am facing a problem on auto refresh, the report data source is SharePoint list Data Feed, I saved it my PC desktop when I set up auto fresh it fails then I moved the SharePoint list data feed "atomsvc" file to A SharePoint Data feed library then connected
    to report started a manual refresh it was success, after next schedules it failed.
    Error massage:
    Errors in the high-level relational engine. The following exception occurred while the managed IDbConnection interface was being used: 
    The network path was not found. ;The network path was not found. The network path was not found. . 
    A connection could not be made to the data source with the DataSourceID of '82f49f39-45aa-4d61-a15c-90ebbc5656d', 
    Name of 'DataFeed testingreport'. An error occurred while processing the 'Testing Report' table. The operation has been cancelled.  
    Thank you very much !
    erkindunya

    If you are using Claims Auth then this is a known limitation.  Auto refresh only works under Classic Auth.
    I trust that answers your question...
    Thanks
    C
    http://www.cjvandyk.com/blog |
    LinkedIn | Facebook |
    Twitter | Quix Utilities for SharePoint |
    Codeplex

  • Limit string-length in Reporting Data Source

    Hello,
    we want to report some attributes to the BI. For this we use the standard reporting activity in the BPM. After we done a lot of configuration on the CE and the BI we achieved to connect the two systems. All attributes are passed correctly to the BI and now we have a problem with the string-length we pass to the BI. The string-length they get from the CE is 512 but the BI can only handle strings with a 60-length. Is it possible to limit the length of a string in the BPM or the CE?
    Manuel

    Hello Jun,
    I have created reporting data source in my BPM where my parameter defined is of type "STRING'.
    This data source is accessed by BW system for reporting purpose where they get an error as below -
    "STRING/XTRING types used Not supported by currently selected access method UDCGEN; cannot use this method"
    Looks like BW does not support string type, how can we make this datatype compatible?
    Please share if you have any idea.
    Thanks,
    Priya

  • Error on clicking "Report Data Source" in library created using power pivot template

    Hi,
    On clicking on "Report Data Source"  in library created using power pivot template i am getting below exception. Can some one help me in understanding the root cause / fix it.
    Error being shown: Microsoft.ReportingServices.SharePoint.SharedService.Client.RecoverableCommunicationException: The content type text/html; charset=utf-8 of the response message does not match the content type of the binding (application/soap+msbin1).
    If using a custom encoder, be sure that the IsContentTypeSupported method is implemented properly. The first 1024 bytes of the response were: '<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd">
     <html xmlns="http://www.w3.org/1999/xhtml">  <head>  <title>IIS 8.0 Detailed Error - 500.19 - Internal Server Error</title>  <style type="text/css">  <!--  body{margin:0;font-size:.7em;font-family:Verdana,Arial,Helvetica,sans-serif;}
     code{margin:0;color:#006600;font-size:1.1em;font-weight:bold;}  .config_source code{font-size:.8em;color:#000000;}  pre{margin:0;font-size:1.4em;word-wrap:break-word;}  ul,ol{margin:10px 0 10px 5px;}  ul.first,ol.first{margin-top:5px;}
     fieldset{padding:0 15px 10px 15px;word-break:break-all;}  .summary-container fieldset{padding-bottom:5px;margin-top:4px;}  legend.no-expand-all{padding:2px 15px 4px 10px;margin:0 0 0 -12px;}  legend{color:#333333;;margin:4px 0 8px -12px;_margin-top:0px;
     font-weight:bold;font-size:1em;}  a:link,a:visited{color:#007EFF;font-weight:bold;}  a:hover{text-decoration:none;}  h1{font-size:2.4em;margin:0;color:#FFF;}  h2{font-size:1.7em;margin:0'. ---> System.ServiceModel.ProtocolException:
    The content type text/html; charset=utf-8 of the response message does not match the content type of the binding (application/soap+msbin1). If using a custom encoder, be sure that the IsContentTypeSupported method is implemented properly. The first 1024
    bytes of the response were: '<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd">  <html xmlns="http://www.w3.org/1999/xhtml">  <head>  <title>IIS
    8.0 Detailed Error - 500.19 - Internal Server Error</title>  <style type="text/css">  <!--  body{margin:0;font-size:.7em;font-family:Verdana,Arial,Helvetica,sans-serif;}  code{margin:0;color:#006600;font-size:1.1em;font-weight:bold;}
     .config_source code{font-size:.8em;color:#000000;}  pre{margin:0;font-size:1.4em;word-wrap:break-word;}  ul,ol{margin:10px 0 10px 5px;}  ul.first,ol.first{margin-top:5px;}  fieldset{padding:0 15px 10px 15px;word-break:break-all;}
     .summary-container fieldset{padding-bottom:5px;margin-top:4px;}  legend.no-expand-all{padding:2px 15px 4px 10px;margin:0 0 0 -12px;}  legend{color:#333333;;margin:4px 0 8px -12px;_margin-top:0px;  font-weight:bold;font-size:1em;}  a:link,a:visited{color:#007EFF;font-weight:bold;}
     a:hover{text-decoration:none;}  h1{font-size:2.4em;margin:0;color:#FFF;}  h2{font-size:1.7em;margin:0'. ---> System.Net.WebException: The remote server returned an error: (500) Internal Server Error.    
     at System.Net.HttpWebRequest.GetResponse()    
     at System.ServiceModel.Channels.HttpChannelFactory`1.HttpRequestChannel.HttpChannelRequest.WaitForReply(TimeSpan timeout)     -
     -- End of inner exception stack trace ---    Server stack trace:     
     at System.ServiceModel.Channels.HttpChannelUtilities.ValidateRequestReplyResponse(HttpWebRequest request, HttpWebResponse response, HttpChannelFactory`1 factory, WebException responseException, ChannelBinding channelBinding)    
     at System.ServiceModel.Channels.HttpChannelFactory`1.HttpRequestChannel.HttpChannelRequest.WaitForReply(TimeSpan timeout)    
     at System.ServiceModel.Channels.RequestChannel.Request(Message message, TimeSpan timeout)    
     at System.ServiceModel.Channels.SecurityChannelFactory`1.SecurityRequestChannel.Request(Message message, TimeSpan timeout)    
     at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs, TimeSpan timeout)    
     at System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessage methodCall, ProxyOperationRuntime operation)    
     at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage message)    Exception rethrown
     at [0]:     
     at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)    
     at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)    
     at Microsoft.ReportingServices.ServiceContract.IReportServiceManagement.get_IsWebServiceEnabled()    
     at Microsoft.ReportingServices.SharePoint.SharedService.Client.ReportingWebServiceApplicationProxy.<>c__DisplayClass8`1.<ExecuteOnApplication>b__6(IReportServiceManagement proxy, Int32 dummy)    
     at Microsoft.ReportingServices.SharePoint.SharedService.Client.ReportingWebServiceApplicationProxy.ExecuteOnChannel[T](String siteUrl, String xmlNamespace, Action`2 method, IChannel channel, Int32 maxFaultSize)    
     at Microsoft.ReportingServices.SharePoint.SharedService.Client.ReportingWebServiceApplicationProxy.HandleExecuteOnChannel[T](String siteUrl, String xmlNamespace, Action`2 method, SPServiceLoadBalancerContext loadBalancerContext)     -
     -- End of inner exception stack trace ---    
     at Microsoft.ReportingServices.SharePoint.SharedService.Client.ReportingWebServiceApplicationProxy.HandleExecuteOnChannel[T](String siteUrl, String xmlNamespace, Action`2 method, SPServiceLoadBalancerContext loadBalancerContext)    
     at Microsoft.ReportingServices.SharePoint.SharedService.Client.ReportingWebServiceApplicationProxy.ExecuteOnApplication[T](String operationName, String siteUrl, String xmlNamespace, Action`2 method)    
     at Microsoft.ReportingServices.SharePoint.SharedService.Client.ReportingWebServiceApplicationProxy.Invoke[T](SPServiceContext serviceContext, String operationName, String siteUrl, String xmlNamespace, Guid serviceInstanceId, Action`2 method)    
     at Microsoft.ReportingServices.SharePoint.SharedService.Client.ReportingWebServiceClient.Execute[TResult](String methodName, Func`2 action)    
     at Microsoft.ReportingServices.SharePoint.UI.BaseRSLayoutPage.ValidateReportServerConnection(SrvProxy rsProxy)
    Followed steps from below link :
    http://www.mssqltips.com/sqlservertip/3004/getting-started-with-power-view-reports-with-sharepoint-excel-and-sql-server/
    Thanks,
    Venugopal

    Hi Venugopal,
    Please refer to the blogs below and see if it works for your case:
    http://sharepointerthilosh.blogspot.com/2013/10/sharepoint-2013-reports-unexpected.html
    http://badalratra.wordpress.com/2014/03/13/error-the-content-type-texthtml/
    To create a Power View report, start Power View from a
    data model file in SharePoint Server 2010 or 2013. Models, or connections to models, can be in a SharePoint Server document library or in a
    Power Pivot Gallery, a special purpose SharePoint Server document library that provides rich preview and document management for published Microsoft Excel workbooks that contain data models.
    Please refer to the links below to get report in Power View in SharePoint server:
    http://office.microsoft.com/en-in/excel-help/power-view-in-sharepoint-server-create-save-and-print-reports-HA102834736.aspx
    http://office.microsoft.com/en-in/excel-help/create-a-connection-to-a-data-model-for-power-view-HA102835737.aspx
    Regards,
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected] .
    Rebecca Tu
    TechNet Community Support

  • Creating new Data Source Error - Database connection Failed

    Successfully installed and configured 11.1.1.3.0. Planning and Essbase dev.
    Went to Workspace > Administer > Classing Planning Administration > Manage Data Sources > Create Data Source.
    Entered all info about the application database , etc. Getting error "The database connection failed" (I was able to connect with no problem during the install)
    SQL server 2005 is on the same physical server.
    The diagnostic tool shows database connection passed for planning. A new database was created for the new application.
    The server event viewer shows these errors.
    "Login failed for user 'xxx-hyperion'. The user is not associated with a trusted SQL Server connection."
    Group Policy Error "The client-side extension could not apply computer policy settings for 'Default Domain Policy {xxx}' because it failed with error code '0x80070003 The system cannot find the path specified.' See trace file for more details. "
    The Group Policy client-side extension Group Policy Services failed to execute. Please look for any errors reported earlier by that extension.
    Any help is appreciated.

    Datasource for the application.
    I have created a sql db for this planning application (my datasource). See my first message for more details.
    When you create a new planning application, you need to associate it with a data source. Since this is a new install, I don't have any data sources available yet.
    So, "To create, edit or delete data sources, click Manage Data Source."
    This page lets you validate your connection to the database and essbase server. My essbase server connection validates! The database connection does not validate after I enter all the relevant information.
    SCREEN INFO BELOW
    Fields displayed with an asterisk (*) are mandatory.
    Data Source Name *:
    Data Source Description:
    Select Database Platform
    Microsoft SQL Server
    Application Database
    Server * :
    Port * :
    Database *:
    User *:
    Password *:
    Click "Validate Database Connection"
    ERROR ---> Database connection failed.
    So it does not let me create a data source for my new planning application, so I cannot create a new planning application.
    Thanks in advance.

  • SAP Crystal Reports data source connection problem using sap business one

    Hi,
    I m facing a problem regarding: SAP Crystal Reports data source connection problem using sap business one
    I am trying to create a Crystal report but when I try to configure a new connection it does not work.
    I select Sap Business One data source and try to complete the information required to connection but it does not list my companies databases, what is the problem?
    Our Current SAP related software details are as follows:
    OS: Windows Server 2008
    SAP B1 Version: SAP B1 9 (902001) Patch 9
    SAP Crystal Report Version: 14.0.4.738 RTM
    Database: MS SQL Server 2008 R2
    I have also added some screenshots of the issues.
    Please have a look and let me know if you have any questions or any further clarifications.
    I m eagerly waiting for a quick and positive reply.

    Hi,
    There is problem with SAP Business One date source.
    I had faced same problem, I used OLEDB Data-source, and it worked fine for me.
    So, try to use OLEDB.
    Regards,
    Amrut Sabnis.

  • Problem creating new data sources

    hi -- I've just created a file DSN data source (Microsoft ODBC for Oracle Driver), and in Crystal, have used the ODBC (RDO) data source type, pointing to the file DSN. (I'm accessing an Oracle 10g database on a Unix server.)
    The connection to the database is successful, but when I use the Database Expert to pick the actual object (eg table) that I want the report to access, I get the following strange results:
    Not all schemas are visible
    For the schemas that are visible, only stored procedures are shown. No tables, views, or anything else.
    When I create an Oracle Server data source, all schemas and their objects are visible. The report works fine.
    Can someone explain to me why the File DSN is not showing me all schemas and objects?
    Thanks,
    Carol

    All -- Thanks for your suggestions. I probably should have given you more information up front:
    - I've already updated the database using Set Datasource Location.
    - I've already verified that the database explorer is including views and tables
    and is not restricting based on LIKE.
    - I did as Sourashree suggested and created a system DSN -- it also only shows
    me the stored procedures.
    I have successfully created a non-ODBC data source just using the Crystal Reports
    data source type of Oracle Server.  It works just fine -- tables, views, everything I need
    shows up in the explorer. So, my question about the File DSN is really just academic,
    out of curiousity (I struggled with it so long I'd like to know why it doesn't work!).
    If you can help me out, that would be great. But I see no reason the Oracle Server
    data source won't meet our needs.
    Thanks,
    Carol

  • Fields missing while creating the data source

    Hi All
    I am using a third party system to pull data in to BI...Actually there was one table where from the other end they had added 2 fields recently...when i checked in development i was able to create the data source for the table along with the new fields..but when i check it in production those newly added 2 fields are missing .. though i am able to see  the old fields in the data source the newly added fields are missing..so is there any problem with the refreshment of the table or should we reastart the connection?
    Can any one  please  let me know a solution for this...
    Regards
    Shilpa

    HI,
    Are you having connectivity like this
    BI Dev
    BI QA         ---> All Three connected to same 3 rd party system
    BI Prod
    If yes, If it is R3 replicate datasource will help.
    Incase of third party system you need to regenerate the datasource.
    if it is DB Connect try to go to the source system and connect to database table from BI side and at the top you will have
    generate datasource. use that option you will be able to solve.
    Else
    BI Dev - 3rd party dev
    BI prod - 3rd party prod
    Try to add 2 new fields in the 3rd party system and generate the datasource as told above.
    Thanks
    Arun
    Edited by: Arunkumar Ramasamy on Sep 14, 2009 9:12 AM

Maybe you are looking for