45N1125 "health unavailable" error in Power Center on T440s

Hello,
I have run into a problem with 45N1125 batteries on the T440s. Somehow, Power Center is unable to read their health. I don't know if this happens on every machine or not, but it has happened on at least 8 so far in my own experience.
All I'm doing is a clean install of Windows 7 Pro. Then I run every driver and other software update imaginable via Lenovo Update Utility.
Simply put: Power Center shows "health unavailable" on 45N1125, so I've just been swapping that number out for 45N1127, which works fine.
What's the deal here? 45N1125s are listed as compatible with these machines. Why (apparently) aren't they?
Thanks
-Joseph

Hi Joseph7,
Welcome to Lenovo Community!
As per the query we understood that you are facing the issue with battery on ThinkPad T440s.
Please check with uninstalling Power manager and Power management application from the system and check with updating it manually.
Hope this helps.
Best regards,
Hemanth Kumar
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Similar Messages

Custom Workflow Load Error in Power Center error code 36331

Hi,
I have installed OBIEE version 11.1.6 and OBI APPS version 7.9.6.3. I am using informatica power center 9.0.1.
I have followed the following guide Oracle® Business Intelligence Applications Configuration Guide for Informatica PowerCenter Users
Version 9.0.1
When i run a load i am getting the error code 36331.
And the Workflow Log shows the below:
*ERROR 2/5/2013 5:30:58 PM node1 1423948096 LM_36320 Session task instance [C_SDE_ORA_EmployeeDimension]: Execution failed.*
The DAC log file is as follows
*3722 SEVERE Tue Feb 05 17:23:29 GMT 2013 Workflow C_SDE_ORA_EmployeeDimension failed with the following message :*
*=====================================*
STD OUTPUT
*=====================================*
Informatica(r) PMCMD, version [9.0.1 HotFix2], build [242.1111], LINUX 64-bit
Copyright (c) Informatica Corporation 1994 - 2010
All Rights Reserved.
Invoked at Tue Feb 05 17:23:28 2013
*Connected to Integration Service: [BIAIS].*
*Integration Service status: [Running]*
*Integration Service startup time: [Sun Jan 13 12:10:31 2013]*
*Integration Service current time: [Tue Feb 05 17:23:29 2013]*
*Folder: [CUSTOM_SDE_ORAR1213_Adapter]*
*Workflow: [C_SDE_ORA_EmployeeDimension] version [1].*
*Workflow run status: [Failed]*
Workflow run error code: [36331]
*Workflow run error message: [WARNING: Session task instance [C_SDE_ORA_EmployeeDimension] failed and its "fail parent if this task fails" setting is turned on. So, Workflow [C_SDE_ORA_EmployeeDimension] will be failed.]*
Workflow run id [1052].
*Start time: [Tue Feb 05 17:23:08 2013]*
*End time: [Tue Feb 05 17:23:13 2013]*
*Workflow log file: [instance/3rdparty/oraclebi/infrmatica/901/server/infa_shared/WorkflowLogs/SDE_ORA_EmployeeDimension.log]*
*Workflow run type: [User request]*
*Run workflow as user: [Administrator]*
Run workflow with Impersonated OSProfile in domain: []
*Integration Service: [BIAIS]*
Disconnecting from Integration Service
Completed at Tue Feb 05 17:23:29 2013
*=====================================*
ERROR OUTPUT
*=====================================*
*3723 SEVERE Tue Feb 05 17:23:29 GMT 2013 pmcmd startworkflow -sv BIAIS -d node -u Administrator -p **** -f CUSTOM_SDE_ORAR1213_Adapter -paramfile /instance/3rdparty/oraclebi/infrmatica/901/server/infa_shared/SrcFiles//ORA_R1213.DataWarehouse.CUSTOM_SDE_ORAR1213_Adapter.C_SDE_ORA_EmployeeDimension.txt C_SDE_ORA_EmployeeDimension*
Status Desc : Failed
WorkFlowMessage :
*=====================================*
STD OUTPUT
*=====================================*
Informatica(r) PMCMD, version [9.0.1 HotFix2], build [242.1111], LINUX 64-bit
Copyright (c) Informatica Corporation 1994 - 2010
All Rights Reserved.
Invoked at Tue Feb 05 17:23:28 2013
*Connected to Integration Service: [BIAIS].*
*Integration Service status: [Running]*
*Integration Service startup time: [Sun Jan 13 12:10:31 2013]*
*Integration Service current time: [Tue Feb 05 17:23:29 2013]*
*Folder: [CUSTOM_SDE_ORAR1213_Adapter]*
*Workflow: [C_SDE_ORA_EmployeeDimension] version [1].*
*Workflow run status: [Failed]*
Workflow run error code: [36331]
*Workflow run error message: [WARNING: Session task instance [C_SDE_ORA_EmployeeDimension] failed and its "fail parent if this task fails" setting is turned on. So, Workflow [C_SDE_ORA_EmployeeDimension] will be failed.]*
Workflow run id [1052].
*Start time: [Tue Feb 05 17:23:08 2013]*
*End time: [Tue Feb 05 17:23:13 2013]*
*Workflow log file: [instance/3rdparty/oraclebi/infrmatica/901/server/infa_shared/WorkflowLogs/SDE_ORA_EmployeeDimension.log]*
*Workflow run type: [User request]*
*Run workflow as user: [Administrator]*
Run workflow with Impersonated OSProfile in domain: []
*Integration Service: [BIAIS]*
Disconnecting from Integration Service
Completed at Tue Feb 05 17:23:29 2013
*=====================================*
ERROR OUTPUT
*=====================================*
Error Message : Unknown reason for error code 36331
ErrorCode : 36331
*3724 SEVERE Tue Feb 05 17:23:29 GMT 2013 Could not get statistics for sessions using command :pmcmd getsessionstatistics -sv BIAIS -d node -u Administrator -p **** -f CUSTOM_SDE_ORAR1213_Adapter -w C_SDE_ORA_EmployeeDimension SDE_ORA_EmployeeDimension*
*3725 SEVERE Tue Feb 05 17:23:29 GMT 2013*
ANOMALY INFO::: Error while executing : INFORMATICA TASK:CUSTOM_SDE_ORAR1213_Adapter:C_SDE_ORA_EmployeeDimension:(Source : FULL Target : FULL)
MESSAGE:::
Irrecoverable Error
pmcmd startworkflow -sv BIAIS -d Instance -u Administrator -p *** -f CUSTOM_SDE_ORAR1213_Adapter -paramfile /instance/3rdparty/oraclebi/infrmatica/901/server/infa_shared/SrcFiles//ORA_R1213.DataWarehouse.CUSTOM_SDE_ORAR1213_Adapter.C_SDE_ORA_EmployeeDimension.txt C_SDE_ORA_EmployeeDimension*
Status Desc : Failed
WorkFlowMessage :
*=====================================*
STD OUTPUT
*=====================================*
Informatica(r) PMCMD, version [9.0.1 HotFix2], build [242.1111], LINUX 64-bit
Copyright (c) Informatica Corporation 1994 - 2010
All Rights Reserved.
Invoked at Tue Feb 05 17:23:28 2013
*Connected to Integration Service: [BIAIS].*
*Integration Service status: [Running]*
*Integration Service startup time: [Sun Jan 13 12:10:31 2013]*
*Integration Service current time: [Tue Feb 05 17:23:29 2013]*
*Folder: [CUSTOM_SDE_ORAR1213_Adapter]*
*Workflow: [C_SDE_ORA_EmployeeDimension] version [1].*
*Workflow run status: [Failed]*
Workflow run error code: [36331]
*Workflow run error message: [WARNING: Session task instance [C_SDE_ORA_EmployeeDimension] failed and its "fail parent if this task fails" setting is turned on. So, Workflow [C_SDE_ORA_EmployeeDimension] will be failed.]*
Workflow run id [1052].
*Start time: [Tue Feb 05 17:23:08 2013]*
*End time: [Tue Feb 05 17:23:13 2013]*
*Workflow log file: [instance/3rdparty/oraclebi/infrmatica/901/server/infa_shared/WorkflowLogs/SDE_ORA_EmployeeDimension.log]*
*Workflow run type: [User request]*
*Run workflow as user: [Administrator]*
Run workflow with Impersonated OSProfile in domain: []
*Integration Service: [BIAIS]*
Disconnecting from Integration Service
Completed at Tue Feb 05 17:23:29 2013
*=====================================*
ERROR OUTPUT
*=====================================*
Error Message : Unknown reason for error code 36331
ErrorCode : 36331
EXCEPTION CLASS::: com.siebel.analytics.etl.etltask.IrrecoverableException
I have checked all of the Mappings, Mapplets and Workflows as well as generating parameters for attempting the load, but it still errors. Does anyone have any ideas?
Many thanks for any help in advance.

Was the Workflow or the DAC task been modified. Because the Out-of box customer dimension task would look like:
is Commands executed :
pmcmd startworkflow -sv OBID_REP -d Domain_xxx.com -u Administrator -p **** -f SDE_ORAR1213_Adaptor -lpf /u01/oracle/Informatica/server/infa_shared/SrcFiles//ORA_R1213.DataWarehouse.SDE_ORAR1213_Adaptor.SDE_ORA_EmployeeDimension_Full.txt SDE_ORA_EmployeeDimension_Full
If a session in the workflow is renamed then the DAC Command's need to be modified to reflect the new name.
Was Execution Plan built before Starting it.
Let me know if this helped.
Regards,
Jay

Installtion of Informatic Power Center 9.0.1 in Solaris Sprac 64 Bit

I want to know how to configure and which file required for Informatic Power Center 9.0.1 in Solaris Sprac 64 Bit setup.
Please help to how configure server and client in solaris sprac .

This link i hv alerady follow but stiil not able intsall.
Its given error like
./runInstaller
Platform is Solaris SPARC64
Starting Oracle Universal Installer...
Checking Temp space: must be greater than 80 MB. Actual 23177 MB Passed
Checking swap space: must be greater than 150 MB. Actual 41270 MB Passed
Checking monitor: must be configured to display at least 256 colors. Actual 16777216 Passed
Preparing to launch Oracle Universal Installer from /tmp/OraInstall2012-09-14_10-08-09AM. Please wait ...The Java RunTime Environment was not found at /tmp/OraInstall2012-09-14_10-08-09AM/jdk/jre/bin/java. Hence, the Oracle Universal Installer cannot be run.
Please visit http://www.javasoft.com and install JRE version 1.3.1 or higher and try again.
: No such file or directory
When try to install its given error
But I have updated Java Version
java version "1.5.0_18"
Java(TM) Platform, Standard Edition for Business (build 1.5.0_18-b02)
Java HotSpot(TM) Server VM (build 1.5.0_18-b02, mixed mode)

Doubt on installing informatica power center reports

hi all,
i have downloaded informatica 8.1.1 from oracle portal. i am installing but got error while installing informatica power center reports saying that server URL for dataanalyzer/metadata manager instance must be entered. awaiting for responses.
thanks in advance

You can get the key from edelivery.oracle.com
If you follow it "how to i get my licenses" then it will take you to
http://licensecodes.oracle.com/
select Hyperion and then look for your product
System 9 Data Integration Management (11.1.1 and 11.1.1.1 only)
Hyperion_DIM.zip
If you have a problem, please get back or let us know it worked.
By the way are you planning to extract data from Essbase 11.1.x, what is your target for this data?

Loading Hierarchies from Informatica Power Center

Hi Guys,
I am getting the error when I tried to load the Hierarchy from the Legacy system using Informatica Power Center. The structure of the data which is coming from the source system is in the same structure which we normally load it from the flat file.
NODEID | INFOOBJECT | NODENAME | LINK | PARENTID | LANGU | TXTSH | TXTMD | TXTLG
I was able to load the data from the flat file source system without any errors, but if I use 3rd party source system I am getting the follwoing error.
Node ID 00000080 has not been included in the hierarchy
Message no. RH207
Diagnosis
The node with the ID 00000020 and the node name ZMC is not specified as
child, next, or parent in any node in the hierarchy. It is also not a root node (parent ID is not equal to 0). Therefore, the node is not used in the hierarchy.
Procedure
Delete this node or insert the node into the hierarchy.
Anybody loaded the hierarchy from 3rd party systems into BW. Could some one tell us where we are missing something
Appreciate any kind of help.
Thanks
John

Hi BB,
Thanks for your reply. The problem is, system has to create the TLEVEL automatically if the hierarchy data is coming from the Informatica. If I download the same data and load it through the flat file, its working fine because for the flat file source systems TLEVEL is automatically creating by the system. We are planning to implement a custom solution.
Thanks once again.
Regards
John

How to remove error message power pc applications no longer supported

How do you install photoshop 7.0 disk drive on a mac os x with the error message, "Power PC applications are no longer supported"?

Which version of mac os x are you trying to install photoshop 7 on?
If you really do mean photoshop 7 (cira 2002), then it won't work on any newer intel macs.
Photoshop 7 needs an PowerPC processor and your mac probably uses an intel processor.

I have open office. Someone sent me e-mail I can't open. get error message power pc no longer supported. How do I open this doc?

I have open office. Someone sent me e-mail I can't open. get error message power pc no longer supported. How do I open this doc?

Right click your document, hover over "Open with..." and then click "Other".
Find TextEdit and click "Open".
TextEdit will then do it's best to open your document.
If you have iLife, do the same but instead of opening with TextEdit open with Numbers, Pages, Keynote, e.t.c.
To download iLife, click here.
If the above link does not work, click here.
-----EDITS-----
Added "If the above link does not work" at the bottom of the post.
<Edited by Host>

ERROR in profit center group creation...

hai...i want to UPLOAD ALL THE LIST OF PROFIT CENTER DETAILS INTO SAP USING BDC SESSION METHOD..for that purpose i tried to create profit center using TCODE -KE51, but profit center group is not available in my system...i tried to create profit center group seperately using transaction KCH1 and assigned that number on profit center creation screen(KE51)..but i got the error..PROFIT CENTER GROUP 1 CANNOT BE USED HERE....how to solve this error.????may be is there any error in creation of profit center group hierarchy..???..

HI
Thanks for the support, but I have already checked Ambiguity Check but there is no duplicae groups/profit centers are existed.
I tried the same through KCH2 and also path (profit center hierarchy maintenance), but the same error is existed. I have checked with different groups also. But any group it is throwing the same error.
Ex if i am giving group K123456 which is not existed. But the same error is throwing.
Can anybody please suggest is there any programe for correction ?
Thanks in advance
Rao

Import from planning missing in Informatica power center

Hi,
I'm using Informatica Power Center 8.1.sp5 , and trying to connect to hyperion planning 11.1.3.
Created the connection under application connection browser, but now when I go to target designer, I don't see Import From Plannig Option. Please let me know if anyone has seen this before. Thanks
Vinil

You can get the key from edelivery.oracle.com
If you follow it "how to i get my licenses" then it will take you to
http://licensecodes.oracle.com/
select Hyperion and then look for your product
System 9 Data Integration Management (11.1.1 and 11.1.1.1 only)
Hyperion_DIM.zip
If you have a problem, please get back or let us know it worked.
By the way are you planning to extract data from Essbase 11.1.x, what is your target for this data?

Balancing error for profit center in transaction FB08

Dear All,
We have made Vendor payments for some invoices. But for some reaseon, we have to reverse the document. When we try to do FB08, we are unable to do so and we are also getting an error ' Balancing error for Profit center.' In our case though we are on ECC6, we have not activated Document splitting.
Kindly suggest how to reverse this document and what additianal steps to be followed to overcome this error.
Thanx
Shivaji

Hi Shivaji,
Please check the field status group of the GL accounts which you are reversing and check whether the Profit center field is maintained as Mandatory or not .If its so, then please change it as to Optional and try.
In your case you are not activated the document splitting function.so that i recommend you to check the same.
So please Check the field status group of vendor payment GL accounts for reversing .Ie Bank Account GL and Vendor Recon Account GL. If the profit center field for these GL are maintianed as mandatory in the field status group ,then change it as to Optional .
Please let me know...
Regards
Manu
SAP GD.
Edited by: manucs on Feb 12, 2012 7:54 AM

Error deleting Profit Center

Hi All,
Am getting the following error "A profit center scenario is active in new General Ledger Accounting" when I mark a profit center for deletion. Any idea on what is this and how will I be able to delete the profit center?
Thanks,
Rock

Hi,
If the profit center scenario is active in at least one ledger in the new General Ledger Accounting, you should not be allowed to delete a profit center using transaction KE54.
If you want to delete profit centers within a test (for example, in a test system) even though the profit center scenario is active in at least one ledger of the new General Ledger Accounting, you can use Customizing transaction 0KE2 without selecting the "Execute checks" indicator in the processing options. As result, you can delete the profit center at your own risk.
Regards,
Eli

Error in Interaction center

Hi Experts,
I am getting error in Interaction center as given below, when I try to see the existing Incident. However I havenu2019t touched/enhanced the component which is mentioned in the error text.
Cannot display view BTAMNTALL/HdrBillplanSet of UI Component BTAMNTALL
An exception has occurred Exception Class CX_SY_REF_IS_INITIAL - Dereferencing of the NULL reference
Method: CL_BTAMNTAL_HDRBILLPLANS0_CN01=>GET_I_ENTRY_MODE
Source Text Row: 15
Cannot display view BTAMNTALL/HdrBillplanDet of UI Component BTAMNTALL
An exception has occurred Exception Class CX_SY_REF_IS_INITIAL - Dereferencing of the NULL reference
Method: CL_BTAMNTAL_BILLPLAN=>PREPARE_TOOLBAR
Source Text Row: 31
I am getting error in the role which I am using for call coordinator to see the already created Incident using another role call log agent.
Please help me quickly. Solution is highly appreciated
Thanks in advance
Shaik Chand

Hello,
As far as I can see you've got the classes, methods and lines where the issue is happening... so did you try to set a breakpoint and see what is causing the issue? You'll probably find out that an entity is not bound: so the question you'll to answer is why...
Kind regards,
Nicolas.

Error In Cost Center Hierarchy Creation

Hi Guru's
Error In Cost Center Hierarchy Creation
Our Business scenario is we have controlling area 1000, under that we have cost center Group as ABC lower level to that we create each business wise in lower level like 1100, 1200, 1300 under this we create 110010 for production 110020 employee 110030 dummy so on, by mistake the client has created 1400 below level to 1000 now all cost center amount is booked in this is reflecting in 1400 and as well in ABC now I need to move all 1400 cost centers below ABC please let me know how to go about this.
Regards,
Bhaskar

Hi,
So, if it's standard hierarchy go to OKEON and just drag-and-drop this group under ABC; simple as that. In KSH2 (if it's 'alternative' group) the technology of moving is different, but still quite obvious: select the group you want to move and select the new placement.
Regards,
Eli

Can I install IDQ 9.6.1 with Power center 9.5.1 HF4

Nope. The binaries are tightly bundled, you cannot install one without the other. The only alternative you may have is to install 9.6.1 in parallel to 9.5.1; under Unix/Linux that's easier to do than under Windows, but even under Windows this should be possible (because the Windows services installed by both versions have differing names). Regards,Nico

Hello, Currently I have installed informatica power center 9.5.1 HF4. I need to install IDQ 9.6.1. I did get the install for the IDQ9.6.1 but it came with the complete install with the power center 9.6.1 HF1. Is there a way to just install IDQ 9.6.1 and not the complete power center using the install file given. Thank you for your help in advance.

Need an efficient solution using Informatica Power center

Need an efficient solution using Informatica Power center-
I have a requirement-
1-I have a database which gets refreshed everyday.
2-I have a workflow which gets started only if the database gets refreshed.
So I have to design a workflow-- which will do the following things-
a- Checks if the database has been refreshed today or not(Not hard coding...as this workflow will run everyday to check that)
b- If the database has been refreshed then only start the workflow wf_XYZ
( SUGGESTION-may be after the session/task finds out that the db has been refreshed it can create a trigger file which will eventually start the next workflow) else can wait to get the db refreshed.

Just implement the change capture process to load new data.
That would take care of it, and you can relax.
If helps mark
~ http://cool-bi.com

45N1125 "health unavailabl​e" error in Power Center on T440s

Similar Messages

Maybe you are looking for

45N1125 "health unavailable" error in Power Center on T440s