4G system status page?

Is there a system status page for 4G anywhere? My Tbolt everyday or 2 drops to 3G or even 1x for a while, but today it's been stuck on 3G for several hours. I'd like to see if Verizon's got a known issue before calling in.

There was a request on the community page suggestions but it seems to be going nowhere. Guess no one with clout wants to champion it.

Similar Messages

Is there a system status page anywhere?

Lately Verizon email has been FAR less than reliable. I can't seem to find any system status page anywhere. It would seem far smarter and more customer focused for VZ to post such issues rather than have tech support people swamped with angry people that they can't help - adding to the already ridiculously long wait times. Not sure what's going on here but it's not looking good for VZ. Unreliable email is what caused me to leave my former provider.

Way back when you could look at it - I would think that as a business - having an updated status page would eliminate thousands of support tickets. Like now - how we all came here to see why we havent been able to get our email all day.
When we click that support button at the top of the page - it should clearly list current problems. Hiding them just **bleep** people off...it doesnt make you look better.

ICloud System Status page URL

FYI - I just learned about this page:
http://www.apple.com/support/icloud/systemstatus/
Not sure how fast it updates, but the next time my matching is hung I'll check it before I call support. If you weren't aware of this page I just wanted to pass it on.
Cheers.

Good News: you're not alone with this problem -- lnfinite Loop between login and maintenance screen
Bad News: Apple has no fix or work-around yet
A dev support guy called me last week and said that they know of the issue but the only 'help' for now is just be patient. That was 4-5 days ago and I've had no feedback since then. Just be patient.

"certificates, identifiers and profiles" is down, but system status says OK

Anybody else? Started about 10:30 am, PST.
https://developer.apple.com/support/system-status/
I was resetting devices for a client, and when I submitted my changes, I got a gray screen that
promised that "we'll be back soon." Some other stuff from the system status page is down, too:
member center, software downloads.

10:56, system status is updated to reflect the current state of affairs.
I bet it has been a busy 30 minutes *somewhere*.

Why not all fields dimmed or show in display mode after system status TECO and CLSD for Project

Dear All,
When Sets the system status TECO or even CLSD all fields for WBS Elements are not goes to Display mode. User can still edit them or change then.
The fields are:
1. WBS Element Description, technical name: PRPS-POST1
2. Person responsible number, technical name: PRPS-VERNR
Other Progress and Customer enhancement tab pages for WBS Element all fields there also editable in TECO and CLSD system status.
The client do not want to set LOCK system status for master data option.
Is there any enhancement or standard way of doing that?
Regards
Saqib Usman

Dear Saqib,
Its a standard behavior of the system. In CLSD status, transactional data like Procurement gets restricted along with WBSE no and its scheduling details. But it allows to you change like WBSE desc./Responsible person.
Also go thru the below link for clarification of WBSE system status:
http://help.sap.com/saphelp_470/helpdata/en/ee/41f82246ee11d189470000e829fbbd/content.htm
For locking all master data, as above experts suggest, you should use MDLK/LKD.
Regards
Shishir

Please restore e-mail or at least give us some real information. Tech support is almost smug in their response for additional information. The iCloud status page has said the same thing since yesterday. A real dis-service. My business depends on this!

Please restore e-mail or at least give us some real information. Tech support is almost smug in their response for additional information. The iCloud status page has said the same thing since yesterday. A real dis-service. My business depends on this! Any one have any suggestions not being offerd by tech support or Apple? Anything at all?

mdjb wrote:
I just lost a big opportunity to get a new client because of this!! almost 24 hours now without any email service. I was one of the original.mac customers. I am over this time to move on. It is an inferior product.
My sympathy, but, this is what you agreed to when you chose to use a free system: (From terms of service agreement, iCloud)
APPLE DOES NOT GUARANTEE, REPRESENT, OR WARRANT THAT YOUR USE OF THE SERVICE WILL BE UNINTERRUPTED OR ERROR-FREE, AND YOU AGREE THAT FROM TIME TO TIME APPLE MAY REMOVE THE SERVICE FOR INDEFINITE PERIODS OF TIME, OR CANCEL THE SERVICE IN ACCORDANCE WITH THE TERMS OF THIS AGREEMENT.
And this is no different from any other free service I'm afraid. Pay for your mail, then you have the right to expect service.

BSP: Use of dynpro services is not possible in the current system status

Hello,
in the component SRQM_INCIDENT_H i created a own button and eventhandler on the overview view.
Here in this eventhandler i´m calling an own method from an own class. This method is doing a RFC in our ERP system.
If i test the method this works fine.
If i call this method in my eventhandler i get BSP error:
Calling the BSP page was terminated due to an error.
SAP Note
The following error text was processed in the system:
Use of dynpro services is not possible in the current system status
Exception Class CX_SY_MESSAGE_IN_PLUGIN_MODE
Error Name
Program ZCL_CRM_CS_DATA_SERVICES======CP
Include ZCL_CRM_CS_DATA_SERVICES======CM001
ABAP Class ZCL_CRM_CS_DATA_SERVICES
Method CREATE_CS_ORDER
Line 54
Long text -
Error type: Exception
Any ideas?
thank you
Best regards

Hi,
Web-UI cannot handle MESSAGE statements. if it's your own program, you should use the web-ui( view_manager->get_message_container or cl_crm_bol_core's global message container) alternatives to display the messages. If the message statement is being issued by a standard program, it's most usually deliberate attempt to fail on unrecoverable error. You can catch it by usin the try...catch CX_SY_MESSAGE_IN_PLUGIN_MODE ..where you call the standard functions.
Regards,
Arun Prakash

CRM70 Use of dynpro services is not possible in the current system status

Hi all,
i programmed in Webclient UI an own button which calls a Method of a zclass. Within this method i do a remote function call in ERP.
I can test the method successfully but if i call it from CRM Webclient UI i have a BSP error:
Business Server Page (BSP) error
What happened?
Calling the BSP page was terminated due to an error.
SAP Note
The following error text was processed in the system:
Use of dynpro services is not possible in the current system status
Exception Class CX_SY_MESSAGE_IN_PLUGIN_MODE
Could one of you experts please give me a hind?
Thank you
Kind regards
Manfred

Solved,
there was a SAP GUI "MESSAGE" in the ERP function call which is not possible for CRM Webclient UI.
Kind regards
Manfred

ThinkPad W520: Parts Wrongly Listed in and/or Missing from Lenovo Order Status Page

I ordered a configured ThinkPad W520 off Lenovo.com for USD1500 yesterday. Later when I went back to check my order status, to my surprise some parts were either shown up incorrectly or simply missing.
For example my ThinkPad W520 includes (but not limited to) these parts:
Parts missing from Lenovo Order Status page:
UltraNav with TrackPoint & touchpad
Express Card Slot & 4 in 1 Card Reader
Question: Where are they? Why missing?
Parts shown incorrectly on Lenovo Order Status page:
I've ordered: 15.6" FHD (1920 x 1080) LED Backlit Anti-Glare Display, Mobile Broadband Ready
Lenovo Order Status page shows: SBB 15.6FHD (1900 X 1080) LED
Question: Why 1900 instead of 1920? What gives?
To be on the safe, I tried hard to match each of the parts consisting my ThinkPad W520. So far the above are my concerns. I know many of you are long-time Lenovo patrons. I'd appreciate your patience look through the below complete lists and advise if Lenovo indeed have received my order correctly.
Thank you very much!
[B][U]The ThinkPad W520 I've order: [/U][/B]
Part Number: 4270CTO
ThinkPad W520 - 1 Yr Depot Topseller Warranty
Processor: Intel Core i7-2720QM Processor (2.20GHz, 6MB L3)
Operating system: ThinkPad PC DOS License
Operating system language: PC DOS 2000 License
Display type: 15.6" FHD ([B][COLOR="SeaGreen"]1920 x 1080[/COLOR][/B]) LED Backlit Anti-Glare Display, Mobile Broadband Ready
System graphics: NVIDIA Quadro 2000M Graphics with 2GB DDR3 Memory
Total memory: 4 GB DDR3 - 1333MHz (1 DIMM)
Keyboard: Keyboard US English
Pointing device: [B][COLOR="SeaGreen"]UltraNav with TrackPoint & touchpad[/COLOR][/B]
Camera: 720p Camera
Storage subsystem: Internal RAID - Not Enabled
Hard drive: 320 GB Hard Disk Drive, 7200rpm
Optical device: DVD Recordable
System expansion slots: [B][COLOR="SeaGreen"]Express Card Slot & 4 in 1 Card Reader[/COLOR][/B]
Battery: 9 cell Li-Ion Battery - 55++
Power cord: Country Pack North America with Line cord & 170W AC adapter
Bluetooth: Bluetooth 3.0
Integrated WiFi wireless LAN adapters: Intel Centrino Ultimate-N 6300 (3x3 AGN)
Integrated mobile broadband: Integrated Mobile Broadband - Upgradable
Language pack: Language Pack US English
[B][U]ThinkPad W520 shown under Lenovo Order Status:[/U][/B]
4270CT       CONFIGURED SYSTEM
0A68541       SBB ICI7-2720QM
27R1799       VBB PC DOS LICENSE
39T7676       SBB DOS 2000 FLYER - NO
0A68535       SBB 15.6FHD ([B][COLOR="Red"]1900 X 1080[/COLOR][/B]) LED
0A68894       SBB NVQ2000M GR
45M4572       VBB 4GBPC3-10600DDR3 1333SODMM
45M4839       SBB KEYBOARDUS ENGLISH
0A68527       VBB NO FINGERPRINT READER
0A68558       SBB 720P HD CAM INT MICR
0A69620       SBB I RAID-NOT EN
0A68552       SBB 320GB HDD7200RPM
0A71939       SBB DVDRECORDABLE
0A68529       VBB ECS+4IN1CR
45M4816       SBB 9CELLLI-ION BATTERY
0A68904       SBB CPNAMLC+ 170W AC AD
0A68261       SBB BLUETOOTH 3.0
45M4804       SBB IN.CENT.ULTIMATE-N 6300
44C7950       SBB INT WRLSSWDAREANTWRK UPGR
0A68564       SBB LANG PCK US E

you are right, this is very silly! ")
W520 4270CTO i7-2820QM Quadro2000M 1920x1080 Display 16GB RAM 2x240GB Intel 510 SSDs (RAID 0) - BIOS 1.42 - PCMark7:4,568
Samsung Series 9 15-inch NP900X4C-A03US - PCMark7: 4674

Status PAGE in q-notification

hello everybody
I just got a system status in a q-notification that says "PAGE".
Anybody know what that status means and when it is set?
Thanks a lot in advance
Anja

Status 'PAGE' is set when you use 'paging/communucation' function at notification or order.
This function is used to send immediate note to responsible person using SAP office.
Regards
Luke

Printer Device Status Page Error on IPP site

I have print services on Windows Server 2012 Datacenter. When I go to the IPP site and click on a printer that has a Device Status link under the View section, I receive an error,"Device Status Page Error...We are unable to generate the device
status page for the selected printer. Please contact your system administrator for more information". This happens on all our printers that has a Device Status link. And the printers are different models and some are type 3 and type 4. I have tried accessing
the ipp page on Server 2012 and Windows 7 and it still gives the same errors.

You are correct about Microsoft not creating a hotfix for this issue in current versions of Windows. Microsoft support replied to me and indicated the following:
Hi Tiffany,
Thanks for your reply.
After consulting with our product team, we will not fix this issue in the current product consider the many changes involved. but we might
consider it to the next generation product.
Thanks for your understanding and cooperation. Please feel free to let me know if there is anything else that we can help.
Best Regards,

Internet Printing Services - Printer "Device Status Page Error". Please Help.

I am getting Device Status Page Error :
We are unable to generate the device status page for the selected printer. Please contact your system administrator for more information.

Hi,
What’s the OS version of your server? If it’s Windows Server 2003, please try to refer to the following article to see if it could help.
"Device Status Page Error" error message when your printer tries to display a status notification message
http://support.microsoft.com/kb/884552
Best Regards,
Andy Qi
Andy Qi
TechNet Community Support

Prod.prder system status

Hi,
when release prod order i got error msg that ""system status WCRE active"". hw to solve & where this status maintain?
thank

Hi Santosh,
The reason your getting that message is because one of the work centers used in that production order is not released.
Options:
1. Release the work Center
2. Go to BS22 transaction for "I0270 - WCRE Work center until release" double click and for release operation make it to no influence or set it to warning then you can release the production order.
Hope the above answers your query.
If helpful award points
Regards,
Vivek
Added
Check the status of the Work Center, it might be locked, so unlock the same
Also check the usage in basic data page, set it to 009
Edited by: Vivek on Feb 14, 2009 6:44 PM

Status page in X3000 no longer showing any data.

Using the latest 1.0.05 firmware on X3000
Status page perpetually shows "Connecting" even though I'm connected.
It no longer shows data such as the Internet IP address, Gateway etc.
Only DNS IP addresses are shown.

Hi,
Try to turn off your X3000 for around 60secs then check again. If it's doing the same issue after doing a powercycle, you may have to perform a hard reset then reconfigure your router.
If everyone needs to believe in something, I believe I'll have another beer..

How to get system status and user status of service order

Hi,
I want to show user status and system status for service order in my report and i am using CRM_ORDER_READ function module to read the status, but it is returning lot of status records, could anyone please suggest how to get the system status and user status for service order.
I did not find any clue for how to get user status, i can see the user status when i open the transaction using CRMD_ORDER.
Regards,
Kamesh Bathla

Hi,
Go to CRM_JEST table give your service order guid and get the status, pass this status into TJ02. You will get the status of your order.
Regards
Srinu

4G system status page?

Similar Messages

Maybe you are looking for