5.1 audio track but plays stero on atv

file converted in visual hub, in quick time it shows this in the inspector
H.264 Decoder, 720 x 396, Millions
AAC, 6 Channels, 24.000 kHz
when use getinfo in itunes it says channels multi
plays stereo on the atv using hdmi or optical
ive converted other files and they will play dd 5.1
just not the last few ive done, its kinda hit or miss
thanks

One other thing: if you read the Visual Hub manual it says that if you have an original source that is not 5.1 and you try to convert it to 5.1 with Visual Hub, then it won't work.
So, I think the steps are something like this:
1. Be certain your original file is in 5.1
2. Use the iTunes and AppleTV settings in visual hub and set to AppleTV 5.1.

Similar Messages

All of a sudden, none of my video is showing on playback. What did I do?? The only thing showing are the titles, but the full audio track is playing. What did I do?

The only thing showing are the titles, but the full audio track is playing. What did I do? How do I fix it?

Apple TV 1st generation or 2nd?
I would try plugging in the HDMI from the ATV to a different HDMI port on your TV and even trying the ATV on a different TV altogether...sounds like the HDMI port on your TV might be bad or a bad connection. Keep in mind you'll need to switch the TV input to the new HDMI port

I have garage band ver 10.0.2 and am trying to add effects to an audio track but i have no info button or track info under the track tab. How do i get these things to show up on my program?

I have garage band ver 10.0.2 and am trying to add effects to an audio track but i have no info button or track info under the track tab. How do i get these things to show up on my program?

In GarageBand 10.0.2 you can no longer add all kinds of effects freely; this GarageBand '11 feature has been discontinued. Pick one of the predefined patches that already has the effects you want.
However, you can add effects from the predefined audio units.
You'll see the predefined effects on the track, when you open the Smart Controls. To add audio units, click the button and enlarge the the smart controls pane by dragging the dividing line to the Track Area upwards.

Permanent capture only 4 audio tracks but not 16?

everytime i capture ...the log n capture audio tracks will automatically make all 16 tracks on....i have to manually shift off rest 12 tracks...any solution to permanent capture only 4 audio tracks but not 16?

this is my picture showing...icant find the audio button...>.<....plz correct me if im wrong..
[URL=http://imageshack.us][IMG]http://img137.imageshack.us/img137/5505/picture1ye5.png[/IMG][/URL]

Hello.. I try to make copy an audio track(AIFF-C audio) on another dvd but I can't. I was try to made an ''burn folder'' with the audio track but did burn it. Please could someone help me?

Hello.. I try to make copy an audio track(AIFF-C audio) on another dvd but I can't. I was try to made an ''burn folder'' with the audio track but did burn it. Please could someone help me?

You appear to be having a hardware problem. Make an appointment at the Genius Bar of your nearest Apple Store to get a diagnosis.

Audio tracks not playing

A really odd thing keeps happening to me.
When I open my Logic projects it often doesn't play all the audio tracks. If I double-click a region and open it in sample editor I can play it from there but still it doesn't play the track in arrange. And the weird thing is it's not always the same track.
Has this happened to anyone else? It doesn't even bounce the tracks offline, the tracks are absolutely mute.

do they play when moved to another track?
are they light gray in color? select track or segment and hit the m key.
are they assigned to a bus?

Audio tracks all play in mono??

Hi
I authored a dvd with 3 audio tracks on
1.Mono
2.Stereo
3.An alternate stereo mix
but when the dvd is played back all the audio tracks are in mono, I don't know what is going wrong
Paul

Paul,
Please tell us all about the Audio Assets that you used, and also the navigation that you provided for the 3 Audio Tracks. Might be something there.
Good luck,
Hunt

Audio tracks only playing the reverb portion

I'm having an issue with recorded audio tracks not getting played through the output properly. The only audio that I hear is related to the reverb effect on the track. I have been working on this project for a few days and it just started happening this morning. Everything was working fine before I saved it last night.
Example - I have a vocal track. I see via the track mixer the audio is playing but I barely hear any sound. I just hear reverb. If I turn the reverb plugin off (Im using the default GB reverb), I don't hear any audio. It's as if there is a hidden "send" track for the reverb, and the audio track is getting routed to the send track, but not the master track. That's why I only hear the reverb. Since the GB interface is so simple, I don't see a way to edit this or even check it. It's just my guess based on using other DAWs.
If I create a brand new track and drag the audio from "the bad track" - the audio plays. I have to re-add all the plugins I was using to the new track, which is annoying, but at least I have a workaround. I just don't understand how this happened. I seriously did nothing in between the time it worked and it stopped. Last night, everything was good. I hit save and closed. Then this morning I woke up to resume my work, and nothing was playing.
If anyone has a solution for this, please let me know. Mixing is already a time consuming process. I don't need to add more time to the process.
Thanks in advance for any help,
Chris
I'm using Garageband 08 - Version 4.1.2

Since this was pointed out, I've left the "ducking" section as viewable. I just noticed that when I dragged a new .aif file into a new track, it triggered all of the other tracks ducking to be enabled - upwards. The yellow arrow. The new track was ducked under, downwards, or blue arrow.
I'll continue to keep an eye on it for any other patterns.

Audio track not playing back (appears greyed out)...

I just recorded a bass part and the region appears in the track with Audio Data but doesn't play back within the context of the song (arrange window), but does play when I double-click the region and scrub through the Audio window. The region appears greyed out in the Arrange window. It's really weird because everything else plays fine including loops I am using in the other Audio tracks.

Sounds like the region may be muted. Try using the mute tool and click on the region to unmute (or select the region and type 'm' on your keyboard).
Hope it helps...
jord

How can I include audio tracks (to play on a Cd player)???

I'm sure this is possible... but I wanted to add audio tracks to make the DVD play on a conventional cd player (but only the tracks i want to play)..... any suggestions?

the laser of a CD player can't physically read DVD media. All professional cds with dvd tracks are created via the DualDisc method. One side cd, the other side DVD.
The process is acheived at the replication house.
This can be created via dvdsp by sending the replicator your dvd project and the audio cd and they sandwhich them so to speak.

Audio appears on two seperate Audio Tracks but they are not routed together

Hi folks,
Sorry for this, I have done a search of the forum but couldn't find what I am looking for answer wise so I need some help.
1. I load up an Apple loop onto track one
2. I then create a new audio track
3. I then load a new Apple loop
When I load the second Apple loop, the first one not only plays through audio track 1's output but also audio track 2's output.
If I solo the second loop I can still here the first.
Any ideas?

If I solo the second loop I can still here the first
Aside from what Sam said, it's also possible that you have soloed loop 2 while playing loop 1 in the Loops browser. The solo in the Arrange track will not silence what might be playing in the Loops browser.

.avi movie with two audio tracks but QT only shows one

I have a .avi file. When I play it in the VLC Player I can choose between two different audio tracks (two different language tracks) but when I open the same file in QT I only get one track and of course it is the language I don't speak. Is there a way to get into this file and delete the track with the language I don't want so that when I open it in QT it plays the right track/language?
If you need more info please let me know.
thanks

I do have QT Pro.
H.264 files are usually saved in a MP4 container. That's what Handbrake, ffpegX, and D-Vision create, anyway.
The "Choose Language" option is greyed out (unavailable) when I open this H.264 MP4 in Quicktime. If I try to change the settings in "Movie Properties," it says that I must save it with the .MOV file suffix.
It makes no sense to me that Quicktime Player can correctly identify the main audio soundtrack in a XviD file with an AVI container but not in a H.264 video with a MP4 container which Apple has been touting as the latest, greatest thing. Even VLC, an open source product still in beta, gets it right.

Using voice-over function I see the result on the specific audio track but I don't hear anything. What to do?.

Making a film in imovie I never had problems with voice-over. However in my current project I experienced problems at the end. Using the voice-over function I see the result - audio waves at the voice-over track - but I don't hear any sound of this track if I review or play this part of the project. Somebody an idea what I did wrong? Thanks for any suggestion.

Not sure why, but sometimes a project will just cease playback of Voiceovers added to it. I've seen this before, but never had it persist into a new project. As with any issues that are specific to a single project, it's usually best to start over, as one problem is quite possibly indicative of further issues down the line with that same project.
As a workaround (if you REALLY want to avoid recreating the project) would be to copy the voiceover files from within the iMovie Project file (browse to your Movies/iMovie Projects/ folder and right-click or CTRL+Click on the name of the project, then click "Show Package Contents") for that project out to your Desktop (or any other accessible location), then drag them back in to add them as a regular audio track. I've used this trick successfully, but it's not 100% (going back to the 'one problem means more later' thing).

No audio through HDMI cable when listening to audio tracks but ok with vids

Please Help!!
Ok I hooked up my HP to my Samsung 1080p hdtv through an HDMI cable. My computer displays fine on the TV, the visualizer in ITunes shows just fine, but the audio only comes out of the speakers on my laptop when playing a regular music track. When it plays one of the bonus music videos on the same album, audio and video both play. When I play the songs in any other interface, ie windows media player and HP quick play, audio tracks play fine through HDMI. So this has to be something with ITunes. Anyone know what the problem is?
Thanks!

Wouldn't you know it, just figured it out. You have to make sure that itunes is not loaded before hooking up the HDMI cable. So,
turn off itunes,
hook up the HDMI cable,
(go to sound [control panel] and make sure that HDMI has the checkmark next to it),
load itunes,
enjoy.

Why do audio tracks for embedded .swfs for Slide 14, 25 and 36 audio tracks auto play on Slide 1?

I have created a Captivate course with no audio.
Slide 14 in the course has an inserted .swf animation WITH audio (a demo with ‘Kate’s voice’).
Slide 25 in the course has an inserted .swf animation WITH audio.
Slide 36 in the course has an inserted .swf animation WITH audio.
These animations are ‘hidden’ in the slide 14, 25, 36 Properties, and are told to ‘show’ when user clicks a button on the slide.
When published to my hard drive, the course runs as it should, and the animations play correctly when user clicks the play button on slides 14, 25 and 36.
When published course is uploaded to a file server, the course runs as it should, and the animations play correctly when user clicks the play button on slides 14, 25 and 36.
When published course is uploaded to a web server, all 3 .swf animations show up for a split second, (plus 2 other small animated images) one after another, and then disappear, and then the audio of the 1st starts playing, 5 seconds later the audio of the 2nd starts playing, and 5 seconds later the audio of the 3rd starts playing.
The odd thing about this is that once the course is in the Internet Brower cache and the course is refreshed, the audio of the 3 embedded .swfs does not start playing on slide one, and the course works as it should.
Can you please tell me what to do to make the 3 .SWFs NOT execute when slide one of the course is opened?

Did you ever get an answer to this question? Since you have partial success, perhaps you can share some info. My main .swf is loaded on a web server and links to other URLs works well but links to other .swf that are loaded in the same directory as the main .swf do not activate at all..no sound, no visual. Did you load your sub-swf files in the same directory? did you use a special naming scheme? did you load the .html file for the sub-swf?

5.1 audio track but plays stero on atv

Similar Messages

Maybe you are looking for